I own a Samsung S2, with the following details:
PDA : I9100XWLP7
Phone : I9100XXLPS
CSC : I9100OXXLPH
Build info: Tue Apr 3 19:44:49 KST 2012
I am considering rooting it, and as I bought it from Orange, one of the Swiss operators,
In anticipation of a situation where I would need to unroot it, I looked at the ROM stock available on forum.xda-developers.com, but could not find one that corresponds, at least not on the outset, to the one provided by Orange, my phone operator here in Switzerland.
I looked for "xwlp7" on http://forum.xda-developers.com/showthread.php?t=1075278 and Orange is not mentioned, nor is Switzerland in general.
Same issue with page http://forum.xda-developers.com/showthread.php?t=1113928
Would anyone know where I could it it from?
Thanks for your help.
Pierre
Try here.
Related
hello. i bought a galaxy s2 export set from a local mobile retail store and am wondering about its country of origin in case i need to claim warranty.
PDA: I9100UHKE2
PHONE: I9100UHKE2
CSC: I9100UUBKD1
the retail storekeeper insists it is a european set however a quick check with this thread seems to suggest its from Chile. And yet there is no "CH" in the CSC.
anyone know how to read the above then?
America Australia Samsung I9100 Firmwares.
USA Firmware CSC .PIT Android Country Date Download
I9100UHKE1 ## CSC = CHEKE1 EXT4.PIT 2.3.3 Chile 2011 May DOWNLOAD
I9100UHKE2 ## CSC = CHLKE3 EXT4.PIT 2.3.3 Chile 2011 May DOWNLOAD
I9100UHKE4 ## CSC = CHTKE3 EXT4.PIT 2.3.3 Chile 2011 May DOWNLOAD
I9100TDUKE6 ## CSC = VAUKE6 EXT4.PIT 2.3.3 Australia 2011 May DOWNLOAD
http://www.samfirmware.com/WEBPROTECT-i9100.htm
This is my first Samsung phone and I'm still learning the ins and outs... how do you get that info for PDA, Phone, and CSC? Thanks.
go to the dialer. type *#1234#.
thanks keijames but thats the thing. it has the chilean firmware ya. but still havent been able to find the csc I9100UUBKD1 mentioned anywhere. if its chilean it SHOULD have a CH right? that said, i think its prob chilean.
Thanks a lot!
ever find out more? I just bought one online and have the same info as you, I figured it was from Chile as well because of the UHKE2 but the CSC is weird and in kies it says the CSC is KD1 (TTT)
More digging:
Via *#1234#
PDA: I9100UHKE2
PHONE: I9100UHKE2
CSC: I9100UUBKD1 <-------- Huh?
Build Info: Fri May 6 14:26:31 KST 2001
Via Kies
PDA: KE2
PHONE: KE2
CSC: KD1 (TTT) <------ what is TTT?
Via *#272*IMEI#
Sales codes listed: VNO, TTT (selected), TDR
Kies registry entries:
HIDSWVER: I9100UHKE2/I9100UUBKD1/I9100UHKE2/I9100UHKE2
ProductCode: GT-I9100LKLTTT
on back of phone below battery:
I9100
TELEFONO CELULAR/CELLULAR PHONE
MODELO: GT-I9100
SSN: -I9100GSMH
FCC ID: A3LGTI9100
PRODUCTO COREANO / KOREAN PRODUCT
I bought a SGS2 here in Chile an says:
PDA: I9100UHKD7
PHONE: I9100UHKD7
CSC: I9100CHEKD7
change of Firmware
can i change my chilean firmware to UK firmware via odin ?
is it possible
Iceberg87 said:
can i change my chilean firmware to UK firmware via odin ?
is it possible
Click to expand...
Click to collapse
Yes via the stock rom thread in DEV section .
jje
Hi
Vodafone NZ has released Samsung Galaxy S2 but i am not able to find anywhere what their firmware version is. Since i am in NZ i was hoping maybe their CSC and radio would be better .
Anyone has any ideas on how to find it or get it.
@SamFirmware .. any help ..
Thanks
EDIT
-----
found the version infor
PDA: I9100XWKE7
PHONE: I9100XXKE4
CSC: I9100VNZKE4
Build Info: Wed May 1 16:08:22 KST 2011
Hi there,
I currently purchased a new SG3. It has the vodafone branding which I want to change. When I do the *#1234# it shows me the following:
AP: I9300TDUALE6
CP: I9300TDULE6
CSC: I9300TVAUALE6
"About Device" reports:
Model Number: GT-i9300T
Android version: 4.0.4
Baseband version: I9300TDULE6
Kernel version: 3.0.15-CL554509-user
[email protected]#1
SMP PREEMPT Sun May 13 11:52:35 KST 2012
Build number: IMM76D.I9300TDUALE6
Am I able to change the software/firmware from Vodafone to the Telstra one located on Sammobile. Im unable to post outside links but heres a copy of whats available on sammobile.
Firmwares for GT-I9300T - All (10 latest)
Country/Carrier Date Android PDA CSC
Australia (Telstra) 2012 June 4.0.4 I9300TDUALF2 I9300TTELALF2
Australia (Telstra) 2012 May 4.0.4 I9300TDUALE6 I9300TTELALE6
I got no idea how all this rooting stuff works. Im trying to learn but I can get my head around it. So sorry if any of my questions seem stupid. Thanks for all your help in advance.
No need rooting to flash.
And yes you can flash Telstra firmware on Voda model, they are the same hardwares.
You need Odin 3.04 and need samsung usb driver or if you already have it working with Kies, then no worries about driver.
Here I copied the general instruction from the UK thread:
Instructions For Flashing Firmware:
Extract the firmware
Launch Odin
Turn off your device
Put your device into Download MODE (Home + Volume Down + Power)
Click PDA and select *.tar.md5
Then finally click START!
Thanks mate. Am downloading the firmware now. Its gonna take 2 hours to download.
Am I meant to change any of the options in Odin3?
Thanks again.
Now that I have flashed my galaxy s3 successfully.
I keep getting the message "Unfortunately, Messaging has stopped"
Does anyone know what this is or can direct me into the right place? Ive done a factory reset as another thread recommended but didnt work.
Thanks
Hi,
I'm totally new here,
I flashed my mobile Samsung Galaxy S II, many different roms,
I want the stock version back,
Anyhow, I flashed a stock version, but it didn't restore the CSC its unkown...
I'm Egyptian, my friend didn't do anything with his phone,
His CSC is I9100JPLPC,
Can anyone help me ??? I just want it back...
PDA: I9100JPLPF
Phone: I9100XXLPX
CSC: Unkown
Build Info: Wed May 30 16:47:24 KST 2012
I already tried many firmwares, ROMs and stock ROMs... Sammobile and from XDA also...
Thanks in advance
Hi everyone,
I'm in a conundrum. I've gone and soft-bricked my Samsung G3 I9300T and my attempts to flash it with various stock firmware have fallen flat. Can anyone offer me help or direct me to a thread (for dummies) for identifying which firmware would be suitable for my I9300 as I'm led to believe there are differences eg. ZSALED (Hong Kong) vs UBALE6 (Brazil).
Phone details:
Model: GT-I9300T
I've seen other threads posting AP, CP & CSC but I'm not sure how to obtain these details
I'm sorry for being ignorant. But many thanks for your time.
History of phone:
I purchased it off kogan a few years ago.
This is my first time rooting and flashing my S3 and everything's gone horribly wrong.
When I try to put it into recovery mode it will 'cycle' the Samsung Galaxy SIII title page but never reach recovery mode
I can put the phone into Download mode.
I've attempted to flash the phone with these firmwares:
-GT-I9300_TGY_I9300ZSALED_I9300OZSALED_I9300XXLEF.tar. md5
-CheckROM_V4_LG8.tar.md5 (from a thread: PM me if you'd like to know it)
-I9300XXUGMK6_I9300OXAGMK6_I9300XXUGMK6_HOME.tar.md 5
(I use Odin3 v3.04-3.09 to flash these but everytime I run into a Fail)
Hi,
Could someone direct me to a thread that'll teach me the notation of firmware. B/c I still don't understand: the meaning of the designations for PDA & CSC.
Example
Model: GT-I9300
Country: United Kingdom
Version: Android 4.3
Changelist: 2168382
Build date: Thu, 28 Nov 2013 12:07:41 +0000
Product Code: BTU
PDA: I9300XXUGMK6 (What does XX, UGMK6 mean?)
CSC: I9300OXAGMK6 (similarly, what does OX, AGMK6 refer to?)
MODEM: I9300XXUGMK6
And what's the difference between Samsung Galaxy SIII International (firmware) I9300XXEMC2 & I9300XXUGNB4? (XX means Australia, but what do EMC2 or UGNB4 mean?
Again I apologise if I irritate some of you. Any help would be greatly appreciated.
Many thanks,
Kinetik
Get the telecom xt jelly bean 4.3 rom
http://www.gpforums.co.nz/threads/451505/page1
Thanks for the reply, Darke. Would this NZ firmware still be compatible for a handset in Australia, Sydney? I'll give it a try anyway
Kinetik101 said:
Thanks for the reply, Darke. Would this NZ firmware still be compatible for a handset in Australia, Sydney? I'll give it a try anyway
Click to expand...
Click to collapse
No reason why it shouldn't, its the same as the one infront of me. At any rate hopefully it repair your phone so you can maybe install your proper rom