So, I flashed original .58 rom in order to root my LWW, after that, I rooted it and then I tried to install cwm. I used se extreme tweak 1.8 , it finished installation and rebooted my phone and now it goes to boot loop, after boot animation it restarts and does that again. And also the LED blinks white after the bootanimation..
PLEASE HELPPPP
Rooting or installing recovery normally doesn't cause bootloop...is there anything else you did and if ur bl is locked just repair it using pc companion and then root it using kernel trick and install recovery from x-parts....the other solution I can give you is unlock your bootloader, and install a custom stock .58 based kernel(like rage) which has inbuilt recovery and start your phone....
Press THANKS if I helped,
Regards,
AJ
Sent from my SK17i using Tapatalk 2
---------- Post added at 09:49 PM ---------- Previous post was at 09:46 PM ----------
And next time please post in correct section...this is general section not q/a section
Sent from my SK17i using Tapatalk 2
It happened after trying to install cwm. I tried to flash another rom sometimes and 1 time it worked so its workink right now. I just dont know how to install cwm . I'll try it with xparts later. Thanks for fast reply.
Ur welcome buddy...:thumbup:(btw Der's always a button for that)
Regards,
AJ
Sent from my SK17i using Tapatalk 2
I have bootloader unlock no, so I cant unlock the bootloader. I tried xparts and it succesfully installed the recovery but when I reboot to recovery it simply boots normally and blue led flashes. Do you know what the problem is?
When you boot your phone as soon as the screen gets brighter or led shines just press vol-down button for some time
Sent from my SK17i using Tapatalk 2
It didnt work, it boots normally. Even in xparts, I press reboot in recovery, and it boots normally.. and recovery is already installed . what can I do
TheJoker0 said:
It didnt work, it boots normally. Even in xparts, I press reboot in recovery, and it boots normally.. and recovery is already installed . what can I do
Click to expand...
Click to collapse
Did u root ur phone??:what:
Sent from my SK17i using Tapatalk 2
TheJoker0 said:
It didnt work, it boots normally. Even in xparts, I press reboot in recovery, and it boots normally.. and recovery is already installed . what can I do
Click to expand...
Click to collapse
Keep pressing the Power button( on/off).
Hit THANKS if i helped.
when nothing goes right...
go left.
I didnt unterstand. So, its turned off, what do I press to enter recovery?
And yes, my phone is rooted
When Sony Ericsson/Sony logo shows up,keep pressing( not holding down) the on/off button till the recovery.
Works for me.
when nothing goes right...
go left.
If your mobile is accepting fastboot then the kernel trick will work
I think you might have unlocked the bootloader then it's better to flash custom kernel I think rage kernel is ideal for any firmware. Custom kernel flashing is the easiest and safest way to root.
It is the most safest method just insert your cable using this kernel
Sent from my LiveWithWalkman using xda app-developers app
Related
Since I'm not able yet to post into the development forums:
I have decided to finally mod my Xperia S as well (did that only with HTC's before), and after unlocking the bootloader and slap Advanced Stock Kernel on it, i wanted to flash KA09 Xperia SSpeed. At first it all went well, no errors during installation but then i wanted to reboot, and the phone went into a permanent bootloop. There's the Sony startup screen with the Advanced Stock Kernel writing underneath, the blue LED flashes shortly, the phone vibrates, then it starts all over again.
I have tried SEUS but to no avail, since the phone will always restart, hence disconnecting to the PC. I also can't boot the phone into fastboot or recovery, or anything for that matter.
HALP!?
MichaelxHell said:
Since I'm not able yet to post into the development forums:
I have decided to finally mod my Xperia S as well (did that only with HTC's before), and after unlocking the bootloader and slap Advanced Stock Kernel on it, i wanted to flash KA09 Xperia SSpeed. It first it all went, no errors during installation but then i wanted to reboot, and the phone went into a permanent bootloop. There's the Sony startup screen with the Advanced Stock Kernel writing underneath, the blue LED flashes shortly, the phone vibrates, then it starts all over again.
I have tried SEUS but to no avail, since the phone will always restart, hence disconnecting to the PC. I also can't boot the phone into fastboot or recovery, or anything for that matter.
HALP!?
Click to expand...
Click to collapse
hold the power button + volume up then wait till it vibrates 3 times, your phone will power off. then you can use the SEUS, i think its via fastmode (power+volume down) to reflash or u can use flashtool to reflash ur firmware.
this is what i did when im stock on bootloop before (because i dont have back ups).
1. installed flashtool
2. download ftf
3. paste the ftf on c:\firmwares\
4. open flashtool then click the lighting icon, choose fastmode, choose ftf and wait until it says (power off phone then connect via fastmode), since your phone is power off all u need to do is to connect the phone and then hold the power button+ volume down.
5. then it will reinstall your firmware.
6. after reinstalled, flash advanced stock kernel.
7. then make back up of your rom so you dont need to reflash your firmware in case of bootloop.
now that was a quick reply, thank you very much. will try this and will post how it went!
Same problem
MichaelxHell, did it work, did you solve it?
If you did please let me know how you did because i have the same problem, will try what he said above too.
THX
halwar said:
MichaelxHell, did it work, did you solve it?
If you did please let me know how you did because i have the same problem, will try what he said above too.
THX
Click to expand...
Click to collapse
it will work because ive been there before
I was flashing ka xperia kernel (via recovery) over Advanced stock kernel and got this weird bootloop.
Sometimes i couldnt even start the freaking phone. So what i did was when the phone finally started and the botloop started i long pressed Vol Up and powerbutton for about 5sec (after the phone vibrates three times) so it would shut down, since i could not enter fastboot while it was bootlooping. Then held Vol Up (not Vol Down) while plugging in usb, only then i got to enter fastboot.
Then i only reflashed advance stock kernel (ics9.elf) and it finally booted back.
Might be helpful
Sent from my LT26i using xda premium
same problem of boot loop
help previously on ics stock unlocked bootloader via fastboot installed ka v1 kernal via fast boot and ther ka09 nspeed rom through recovery since then its boot loop any solutuion except stock ftf file
Use fastboot and try flashing Advance stock kernel forum.xda-developers.com/showthread.php?t=1729280 and see if its booting
Sent from my LT26i using xda premium
When you go from STOCK STOCK you should first prepare by doing a backup and then erasing everything before even trying to install a custom ROM or another kernel.
When you install a kernel that has recovery, before trying to install the custom ROM be sure to wipe data/factory reset and then wipe dalvik cache and fix permissions.
Then you can install the custom ROM and after that be sure to also install the patched KA09 zip.
And even after that, remember, that is a development ROM not completely stable at all.
halwar said:
Use fastboot and try flashing Advance stock kernel forum.xda-developers.com/showthread.php?t=1729280 and see if its booting
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
I have used this guide, and it worked just fine!! my Xperia S is back alive again! Thank you very much for the help everyone!
halwar said:
Use fastboot and try flashing Advance stock kernel forum.xda-developers.com/showthread.php?t=1729280 and see if its booting
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
MichaelxHell said:
I have used this guide, and it worked just fine!! my Xperia S is back alive again! Thank you very much for the help everyone!
Click to expand...
Click to collapse
Okay, so i have flashed the Kernel from this thread: http://forum.xda-developers.com/showthread.php?t=1729280 and it brought my Xperia S back to life. the only problem now is, that the XPS won't boot into recovery. so far the ROM (KA09 Xperia SSpeed) is working fine, but it would be nice to have good old cwm back.. any help? thanks
I've tried to install cwm recovery a few times and it says pass but I can never boot into recovery.
If i try to reboot with rom manager or install recovery w it, everything freezes up and i have to take the battery. Then I cry and repeat.
rbrmfld said:
I've tried to install cwm recovery a few times and it says pass but I can never boot into recovery.
If i try to reboot with rom manager or install recovery w it, everything freezes up and i have to take the battery. Then I cry and repeat.
Click to expand...
Click to collapse
More info please ..
Are you rooted ? Attempting to root ? Or just changing recovery ?
Also ....what software do you have ?.....stock GB or ICS..
it's tough to know the problem just yet ...g
rbrmfld said:
I've tried to install cwm recovery a few times and it says pass but I can never boot into recovery.
If i try to reboot with rom manager or install recovery w it, everything freezes up and i have to take the battery. Then I cry and repeat.
Click to expand...
Click to collapse
so you have CWM installed?
how are you trying to get into CWM? Power off completely, then hold the Vol's up and down button and power button...til you see the sammy logo then release the power button while still holding the volume button til CWM appears...
I am rooted and i have cwm installed and running ics on it. And i tried to boot into recovery with vol up and power.
rbrmfld said:
I am rooted and i have cwm installed and running ics on it. And i tried to boot into recovery with vol up and power.
Click to expand...
Click to collapse
Okay ....hold both the volume up "and " volume down ..."and " power .....all together ...but you must start from a powered off condition ,and you must push the volume buttons first ...then the power button ....
Hold until you get a single vibration ...then release the power button .
The phone will then show the Sammy logo and then recovery ...
You can release the volume buttons "after " you see the recovery screen ......g
gregsarg said:
Okay ....hold both the volume up "and " volume down ..."and " power .....all together ...but you must start from a powered off condition ,and you must push the volume buttons first ...then the power button ....
Hold until you get a single vibration ...then release the power button .
The phone will then show the Sammy logo and then recovery ...
You can release the volume buttons "after " you see the recovery screen ......g
Click to expand...
Click to collapse
Alright now when i try to boot cm9, it says installation aborted.
Nvm got it. Thanks all.
rbrmfld said:
Nvm got it. Thanks all.
Click to expand...
Click to collapse
cool...if all is good, pls put solved in your title, thx
CWM installed but stock recovery appears
I install CWM recovery via Odin and it was successful. But when I try to boot up my phone to cwm, it boots in to my stock 3e recovery. please help . I'm running on Jelly Bean 4.1.2.
Since you are rooted, use the Quick Boot app to go to recovery from your home screen. Much easier than doing the vol up + vol down + power button thing.
Deathshock01 said:
I install CWM recovery via Odin and it was successful. But when I try to boot up my phone to cwm, it boots in to my stock 3e recovery. please help . I'm running on Jelly Bean 4.1.2.
Click to expand...
Click to collapse
Do you have a Canadian phone by chance? If you do there is an extra step to flash the recovery
Sent from my SAMSUNG-SGH-I717 using xda premium
rquiett said:
Do you have a Canadian phone by chance? If you do there is an extra step to flash the recovery
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Nope. I have an international phone. I try to install cwm touch by Choutu(c) .
---------- Post added at 03:51 PM ---------- Previous post was at 03:46 PM ----------
rquiett said:
Do you have a Canadian phone by chance? If you do there is an extra step to flash the recovery
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
So whats that extra steps to correctly flash cwm recovery.
The correct next step is to go over to the internatiinal note forums. . .
Hi Folks,
I have a stock .587 firmware with locked BL.
I have done some tweaks on it listed below:
- New adreno libs.
- Walkman port V6 by ThilinaC
- removed bloatwares manually and freezed some others.
- JB SystemUI changes by ThilinaC
- adrenaline boost, etc.
I was learning on decompiling and recompiling the apk's. So I picked up the simplest one. i.e. enabling on screen buttons in framework-res.apk.
I made change into in one of the xml and I successfully rebuilt the apk. and flashed it using root explorer. But it gave bootloops.
I tried starting CWM recovery using volume down button at the Sony logo as usual. But it didnt start. I tried so many things like connecting to USB and restarting the phone at that time to start recovery by same pressing volume down button method.
But it didnt work still.
Since I was not able to go into recovery, and since my nand backup was some days old and had some data which was needed.
I flashed only system partition from the .587 ftf. using flashtool and rooted the phone again using normal procedure.
I thought the volume down button will work for recovery but it is still not working. (The button works normally when phone is on i.e for volume down process.)
Please help me what can be done.
P.S.: As of now I can go into recovery using x-parts or any other tool like titanium. But only manual recovery entry is not working.
So it means, I wont be able to go into recovery if I get bootloops again. And I am afraid to change/port anything on my phone now.
try the back button instead of the volume down button
gregbradley said:
try the back button instead of the volume down button
Click to expand...
Click to collapse
back button also didnt work.. Thanks for your reply anyways....
To add to my point....when I repeatedly press volume down/back button, the LED turns blue,,,but as per my observation, previously it used to stay till recovery starts, but now it turns on for 4-5 seconds and then goes off, and then the Experia bootanim shows up.
Is it like the exploit which activates recovery at boot time is damaged?(just a guess)..If maybe yes..how can I solve it?
Try to install recovery again via flashtool.
XperiaNeoVNoob said:
I tried starting CWM recovery using volume down button at the Sony logo as usual. But it didnt start.
Click to expand...
Click to collapse
XperiaNeoVNoob said:
back button also didnt work.. Thanks for your reply anyways....
Click to expand...
Click to collapse
How did you install CWM? Try taping on screen when you see boot logo.
gregbradley said:
Or flash a stock kernel with recovery included (I think you can still do that with locked bootloader, but not sure as I unlocked as soon as I got the phone)
Click to expand...
Click to collapse
Unfortunately you can't.
Madfysh said:
How did you install CWM? Try taping on screen when you see boot logo.
Click to expand...
Click to collapse
Thanks Madfysh...tapping on the screen worked... :good: so happy...
I had tried every button.. Didnt think of screen though...
Initially, I had installed CWM thru DoomLoRD's rooting toolkit. Then I had installed x-parts by pvyParts. There it said a new CWM version was available(v5.5). So I had upgraded that.
Was it the upgrade that had this change?
gregbradley said:
Try to install recovery again via flashtool.
Click to expand...
Click to collapse
Thanks Mate....Tapping on the screen worked. I dont think I need to install the recovery again. But thanks for your help... :good:
XperiaNeoVNoob said:
Thanks Madfysh...tapping on the screen worked... :good: so happy...
I had tried every button.. Didnt think of screen though...
Initially, I had installed CWM thru DoomLoRD's rooting toolkit. Then I had installed x-parts by pvyParts. There it said a new CWM version was available(v5.5). So I had upgraded that.
Was it the upgrade that had this change?
Click to expand...
Click to collapse
There is one version floating around which is using tapping on screen to enter in recovery, so since for you, back and volume- didn't work. Tap on screen was only option left, having in mind that you said that you can enter recovery using xparts, meaning that your recovery is installed ok.
p.s. I doubt you used doomlord's root toolkit to install CWM
Madfysh said:
There is one version floating around which is using tapping on screen to enter in recovery, so since for you, back and volume- didn't work. Tap on screen was only option left, having in mind that you said that you can enter recovery using xparts, meaning that your recovery is installed ok.
p.s. I doubt you used doomlord's root toolkit to install CWM
Click to expand...
Click to collapse
ok..got it..thanks...
For rooting I used Doomlord's toolkit. and the CWM 5.0 comes with that only..I had read somewhere about xparts...so installed it and updated the recovery.tar thru it...that must have done the trick...
Requires:
Stock ICS ROM
Root
Download:
1.0
Install:
Download the zip package
Extract the folder
Connect your phone to the pc with USB debugging
Click on install.bat
How to use:
Power off the phone
Power on the phone
When you see the SONY logo pressing the Volume down button while you see the recovery
Credits:
Jerpelea
Munjeni
is it support external_sd?
How is this different from the earlier one ?
Look at the version
Sent from my MT27i using xda premium
What changes does this bring over the CWM v5. something for locked bootloaders?
Just tested :
-> Not touch recovery
-> Doesn't support ext_card
-> Every thing works.
-> Bootloop on Non Stock ROM (But the develloper warning we about that)
Going back to touch recovery.
Charlus97 said:
Just tested :
-> Not touch recovery
-> Doesn't support ext_card
-> Every thing works.
-> Bootloop on Non Stock ROM (But the develloper warning we about that)
Going back to touch recovery.
Click to expand...
Click to collapse
I did not get any bootloop
Because you'r on the Stock Rom.
I was on CM9.
I know that's normal
I am on Pureblood rom....I guess it happens on cm
People, calm down. CM for unlocked BL has its own CWM. So what's the point has used CWM for locked BL wanting to install rom that requires unlocked BL, because it has its own CWM?
I do not understand you. It's obvious that you will have bootloop using CM. In addition, the developer clearly said that CWM is for stock rom. ONLY.
Requires:
Stock ICS ROM
Root
Click to expand...
Click to collapse
So.. Charlus97 and everyone PLEASE. DO NOT REPORT BOOTLOOP IF YOU USE NON STOCK ROM!!!!
I am on Pureblood rom....I guess it happens on cm
Click to expand...
Click to collapse
Pureblood rom is based on stock rom
Charlus97 said:
Pureblood rom is based on stock rom
Click to expand...
Click to collapse
exactly what i said
worked on 6.1.1.B.1.54!
if you using non-stock ROM, please don't reply this thread again...
atis112 said:
Requires:
Stock ICS ROM
Root
Download:
1.0
Install:
Download the zip package
Extract the folder
Connect your phone to the pc with USB debugging
Click on install.bat
How to use:
Power off the phone
Power on the phone
When you see the SONY logo pressing the Volume down button while you see the recovery
Credits:
Jerpelea
Munjeni
Click to expand...
Click to collapse
I have locked boot loader. My sola is rooted. I double clicked on install.bat keeping usb debbuging turned on, it said finished installation. Then i shut down the phone, then i turned it on while pressing the volume down key. But it is not booting into recovery, it is booting Normally....Please Help ! :confuse:
hrishikesh300 said:
I have locked boot loader. My sola is rooted. I double clicked on install.bat keeping usb debbuging turned on, it said finished installation. Then i shut down the phone, then i turned it on while pressing the volume down key. But it is not booting into recovery, it is booting Normally....Please Help ! :confuse:
Click to expand...
Click to collapse
If your PC Companion or other Sony Stuff is opened, than you should close it And try it again
lol98lol98 said:
If your PC Companion or other Sony Stuff is opened, than you should close it And try it again
Click to expand...
Click to collapse
I tried it again closing pc companion but then too its not booting into recovery! what to do?
---------- Post added at 05:00 PM ---------- Previous post was at 04:56 PM ----------
sarsarhos said:
worked on 6.1.1.B.1.54!
Click to expand...
Click to collapse
how come did it work for you? did u factory reset before installing the recovery??
hrishikesh300 said:
I tried it again closing pc companion but then too its not booting into recovery! what to do?
---------- Post added at 05:00 PM ---------- Previous post was at 04:56 PM ----------
how come did it work for you? did u factory reset before installing the recovery??
Click to expand...
Click to collapse
Do you pressing it once or many times? You should press it many times until it show recovery:-/
Sent from my Ultimate Sola
MUHAMMAD KHALIL said:
Do you pressing it once or many times? You should press it many times until it show recovery:-/
Sent from my Ultimate Sola
Click to expand...
Click to collapse
Oh Got it! Finallyyyyy....!!!!!! MY PROB WAS THIS! those words..."keep pressing" made me holding it for long tome,,,
Thanks Muhammad Khalif!
I keep getting on "waiting for device" help me...
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean for Xperia X10) and everything went smooth, (my device was rooted and bootloader unlocked and Xrecovery installed) but for the first boot, only SONY ERICSSON appears and even if I remove and insert only the battery (and dont even touch the power button) the boot screen appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Did you flash ferakernel jb kernel aswell?
Sent from my X10i using xda premium
dunc4n88 said:
Did you flash ferakernel jb kernel aswell?
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Here is what i Did
1. Rooted the phone
2. Bootloader Unlocked
3. installed Xrecovery
4. downloaded the Fera.zip files onto my SD card
5. did a cleanwipe using Xrecovery
6. Manually mounted the partitions
7. Installed as per the instructions
8. The phone got stuck on the first BOOT
Did i miss any step? and do I have any hope of revival still !!! I am very optimistic that someone here will solve my problem !!!
To use jellybean you need the cm10 kernel for jellybean fera has it in his website under kernels you have ti flash that before installing rom
Sent from my X10i using xda premium
---------- Post added at 10:35 AM ---------- Previous post was at 10:33 AM ----------
http://feralab.ru/kernell.html gusts the kernels page the kernel is at the bottom for jellybean all installation instructions are on his site aswell
Sent from my X10i using xda premium
dunc4n88 said:
To use jellybean you need the cm10 kernel for jellybean fera has it in his website under kernels you have ti flash that before installing rom
Sent from my X10i using xda premium
---------- Post added at 10:35 AM ---------- Previous post was at 10:33 AM ----------
gusts the kernels page the kernel is at the bottom for jellybean all installation instructions are on his site aswell
Sent from my X10i using xda premium
Click to expand...
Click to collapse
So what should be my next step now? How do i get beyond that screen where i m stuck right now, the SONY ERICSSON name flashing as soon as i put in my battery !!!! I am sounding silly , but please help me as I am clueless how to proceed on this one !
Download the jb kernel from fera website and put it in flash tools to flash it pull battery out and when prompted on flashtools connect the phone to the computer but leave battery out then hold the back button on the phone and at same time put battery back in the green led should light up on phone and flashing of kernel should start then once its done unplug phone and power it on
Sent from my X10i using xda premium
dunc4n88 said:
Download the jb kernel from fera website and put it in flash tools to flash it pull battery out and when prompted on flashtools connect the phone to the computer but leave battery out then hold the back button on the phone and at same time put battery back in the green led should light up on phone and flashing of Irene should start then once its done unplug phone and power it on
Sent from my X10i using xda premium
Click to expand...
Click to collapse
You ROCK :good: !!!! Will try this and respond back to you
raja_x10 said:
You ROCK :good: !!!! Will try this and respond back to you
Click to expand...
Click to collapse
So i progressed in flashing the ROM, but now the mobile boots and stays at teh FERALAB screen (status is that it has just replaced the SONY ERICSSON message) , now what next? How do i proceed? DO i have to install the custom ROM again, and if yes then how do I get into Xrecovery to do that? please help !!!!
You might have to pull battery then reinsert keep pressing the back button and volume down button not sure which one it is but try both until it goes into recovery then full wipe cache wipe dalvik cache wipe then mount system and data and cache then install Rom try that let me know what happens
Sent from my X10i using xda premium
dunc4n88 said:
You might have to pull battery then reinsert keep pressing the back button and volume down button not sure which one it is but try both until it goes into recovery then full wipe cache wipe dalvik cache wipe then mount system and data and cache then install Rom try that let me know what happens
Sent from my X10i using xda premium
Click to expand...
Click to collapse
DONE :good: , all is well now, phone on Jellybean, extremely smooth (unexpectedly) ............ but AUDIO DOESNT PLAY , nor does video camera !!!!
If its the v3 of fera jellybean then it wont as it states on the site its a test version plus video recording is a bug with cm10 kernels
Sent from my X10i using xda premium
language racPle
dunc4n88 said:
If its the v3 of fera jellybean then it wont as it states on the site its a test version plus video recording is a bug with cm10 kernels
Sent from my X10i using xda premium
Click to expand...
Click to collapse
I rebooted my phone , and the sound is back . Btw its V4 and i read on the site about video issue on V4 also, so i need to use a 3rd party video recorder i guess .
And how do we get any improvements or updates released by Ferra? Do i need to now copy the bug fixed zip file on my SD CARD and then reboot in recovery mode and select that particular zip file ?
And thanks buddy you have been of a great help to me !!!!
If theres any fixes put in sdcard and flash it via recovery and updates keep checking his website and it will be a complete rom that you will have to install
Sent from my X10i using xda premium
got stuck again
Hi,
I saw your post [Q] X10 stuck on boot screen after Fera Custom ROM installed !
Please help me...
I followed the same u said, when I flash with fera jb kernal, it says "flash failed.., turn on debugging mode"
Please help me, my phone is dead now..
please .... please....:crying:
is your bootloader unlocked? also see the PM ive sent back to you
please help me to resolve x10 flashing issue
--> Xperia x10, flashed with 2.3.3
--> Rooted , installed xrecovery
--> Locked boot loader
Steps followed to install FeraLab v29
-------------------------------------------
1. Booted into xRecovery
2. Install custom ROM
3. Chosen FeraKernel.zip
Failed on certification issue
then Installed CMW recovery, Could not flash ferakernel
Tried to flash Feravolt v29 ROM it works, but stays in SE logo in 1st reboot..
Please help me...
I have same problem, but can't fix with this suggestion
dunc4n88 said:
Download the jb kernel from fera website and put it in flash tools to flash it pull battery out and when prompted on flashtools connect the phone to the computer but leave battery out then hold the back button on the phone and at same time put battery back in the green led should light up on phone and flashing of kernel should start then once its done unplug phone and power it on
Sent from my X10i using xda premium
Click to expand...
Click to collapse
My X10 stuck in SONY ERICSSON. i've try to flash it by hold back button but it didnt work :crying: