Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean for Xperia X10) and everything went smooth, (my device was rooted and bootloader unlocked and Xrecovery installed) but for the first boot, only SONY ERICSSON appears and even if I remove and insert only the battery (and dont even touch the power button) the boot screen appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Did you flash ferakernel jb kernel aswell?
Sent from my X10i using xda premium
dunc4n88 said:
Did you flash ferakernel jb kernel aswell?
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Here is what i Did
1. Rooted the phone
2. Bootloader Unlocked
3. installed Xrecovery
4. downloaded the Fera.zip files onto my SD card
5. did a cleanwipe using Xrecovery
6. Manually mounted the partitions
7. Installed as per the instructions
8. The phone got stuck on the first BOOT
Did i miss any step? and do I have any hope of revival still !!! I am very optimistic that someone here will solve my problem !!!
To use jellybean you need the cm10 kernel for jellybean fera has it in his website under kernels you have ti flash that before installing rom
Sent from my X10i using xda premium
---------- Post added at 10:35 AM ---------- Previous post was at 10:33 AM ----------
http://feralab.ru/kernell.html gusts the kernels page the kernel is at the bottom for jellybean all installation instructions are on his site aswell
Sent from my X10i using xda premium
dunc4n88 said:
To use jellybean you need the cm10 kernel for jellybean fera has it in his website under kernels you have ti flash that before installing rom
Sent from my X10i using xda premium
---------- Post added at 10:35 AM ---------- Previous post was at 10:33 AM ----------
gusts the kernels page the kernel is at the bottom for jellybean all installation instructions are on his site aswell
Sent from my X10i using xda premium
Click to expand...
Click to collapse
So what should be my next step now? How do i get beyond that screen where i m stuck right now, the SONY ERICSSON name flashing as soon as i put in my battery !!!! I am sounding silly , but please help me as I am clueless how to proceed on this one !
Download the jb kernel from fera website and put it in flash tools to flash it pull battery out and when prompted on flashtools connect the phone to the computer but leave battery out then hold the back button on the phone and at same time put battery back in the green led should light up on phone and flashing of kernel should start then once its done unplug phone and power it on
Sent from my X10i using xda premium
dunc4n88 said:
Download the jb kernel from fera website and put it in flash tools to flash it pull battery out and when prompted on flashtools connect the phone to the computer but leave battery out then hold the back button on the phone and at same time put battery back in the green led should light up on phone and flashing of Irene should start then once its done unplug phone and power it on
Sent from my X10i using xda premium
Click to expand...
Click to collapse
You ROCK :good: !!!! Will try this and respond back to you
raja_x10 said:
You ROCK :good: !!!! Will try this and respond back to you
Click to expand...
Click to collapse
So i progressed in flashing the ROM, but now the mobile boots and stays at teh FERALAB screen (status is that it has just replaced the SONY ERICSSON message) , now what next? How do i proceed? DO i have to install the custom ROM again, and if yes then how do I get into Xrecovery to do that? please help !!!!
You might have to pull battery then reinsert keep pressing the back button and volume down button not sure which one it is but try both until it goes into recovery then full wipe cache wipe dalvik cache wipe then mount system and data and cache then install Rom try that let me know what happens
Sent from my X10i using xda premium
dunc4n88 said:
You might have to pull battery then reinsert keep pressing the back button and volume down button not sure which one it is but try both until it goes into recovery then full wipe cache wipe dalvik cache wipe then mount system and data and cache then install Rom try that let me know what happens
Sent from my X10i using xda premium
Click to expand...
Click to collapse
DONE :good: , all is well now, phone on Jellybean, extremely smooth (unexpectedly) ............ but AUDIO DOESNT PLAY , nor does video camera !!!!
If its the v3 of fera jellybean then it wont as it states on the site its a test version plus video recording is a bug with cm10 kernels
Sent from my X10i using xda premium
language racPle
dunc4n88 said:
If its the v3 of fera jellybean then it wont as it states on the site its a test version plus video recording is a bug with cm10 kernels
Sent from my X10i using xda premium
Click to expand...
Click to collapse
I rebooted my phone , and the sound is back . Btw its V4 and i read on the site about video issue on V4 also, so i need to use a 3rd party video recorder i guess .
And how do we get any improvements or updates released by Ferra? Do i need to now copy the bug fixed zip file on my SD CARD and then reboot in recovery mode and select that particular zip file ?
And thanks buddy you have been of a great help to me !!!!
If theres any fixes put in sdcard and flash it via recovery and updates keep checking his website and it will be a complete rom that you will have to install
Sent from my X10i using xda premium
got stuck again
Hi,
I saw your post [Q] X10 stuck on boot screen after Fera Custom ROM installed !
Please help me...
I followed the same u said, when I flash with fera jb kernal, it says "flash failed.., turn on debugging mode"
Please help me, my phone is dead now..
please .... please....:crying:
is your bootloader unlocked? also see the PM ive sent back to you
please help me to resolve x10 flashing issue
--> Xperia x10, flashed with 2.3.3
--> Rooted , installed xrecovery
--> Locked boot loader
Steps followed to install FeraLab v29
-------------------------------------------
1. Booted into xRecovery
2. Install custom ROM
3. Chosen FeraKernel.zip
Failed on certification issue
then Installed CMW recovery, Could not flash ferakernel
Tried to flash Feravolt v29 ROM it works, but stays in SE logo in 1st reboot..
Please help me...
I have same problem, but can't fix with this suggestion
dunc4n88 said:
Download the jb kernel from fera website and put it in flash tools to flash it pull battery out and when prompted on flashtools connect the phone to the computer but leave battery out then hold the back button on the phone and at same time put battery back in the green led should light up on phone and flashing of kernel should start then once its done unplug phone and power it on
Sent from my X10i using xda premium
Click to expand...
Click to collapse
My X10 stuck in SONY ERICSSON. i've try to flash it by hold back button but it didnt work :crying:
Related
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Just flash the original rom with flashtool. Do it like here.
Have you been on rooted ics or rooted gingerbread? Cause I think you have to be on rooted ics to install real ics, but I don't know exactly
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
Download Flashtool from HERE
DOWNLOAD official ICS firmware from HERE
Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
How to root 4.0.4 (4.1.B.0.431)
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
1 ) Download Xperia ray kernel from HERE
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and Put the kernel ( ST18i_4.1.A.0.562_kernel.ftf )
3) Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
Flashtool may show error after flashing kernel, no worries
4) After flashing restart your device, It will not start completely, remain at Sony logo or remain blank/black.
Whatever the status is, just restart your device and proceed with the rooting--->
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC and Root Your Phone
5) Download Xperia mini 4.0.4 Kernel and flash it
Your mobile is now rooted (See if any Superuser app has been installed on your phone ) and back to life
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
the most easy way to flash custom rom is to unlock your bootloader first...then flash any custom kernel that have root and CWM pre-installed...then you can flash any custom rom without any problem....
THANK YOU
OMG! THANK YOU ALL for your time to read my post and reply me!
PROBLEM SOLVED! I M SO HAPPY!
THANK YOU! THANK YOU!
danutzgtx480 said:
Download Flashtool from HERE
DOWNLOAD official ICS firmware from HERE
Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
How to root 4.0.4 (4.1.B.0.431)
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
1 ) Download Xperia ray kernel from HERE
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and Put the kernel ( ST18i_4.1.A.0.562_kernel.ftf )
3) Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
Flashtool may show error after flashing kernel, no worries
4) After flashing restart your device, It will not start completely, remain at Sony logo or remain blank/black.
Whatever the status is, just restart your device and proceed with the rooting--->
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC and Root Your Phone
5) Download Xperia mini 4.0.4 Kernel and flash it
Your mobile is now rooted (See if any Superuser app has been installed on your phone ) and back to life
Click to expand...
Click to collapse
I wouldn't do it with the kernel to flash, cause if something goes wrong you have the ray kernel on mini pro and you will have to try to unlock bootloader and flash other kernel. I would just flash the ftf file for .42 and root, run local-prop and upgrade to ics and run push-root-files.
had $tucked same situation
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
same was the problem when i rooted live with walkman... thanks to xda i came out of problem ..
problem was with kernel
i did unloked bootloader , flashed cwm and rom but i forgot to flash the kernel so i had $tucked at sonyerrison logo..
flashing computed connected worked for me
Michi_optimus_me said:
I wouldn't do it with the kernel to flash, cause if something goes wrong you have the ray kernel on mini pro and you will have to try to unlock bootloader and flash other kernel. I would just flash the ftf file for .42 and root, run local-prop and upgrade to ics and run push-root-files.
Click to expand...
Click to collapse
If something goes wrong you just flash the official 4.1.b.0.431 ftf with flashtool and the phone will be like new but i root my phone ( Xperia mini St15i stock 4.0.4) with this metod and work like a charm
danutzgtx480 said:
If something goes wrong you just flash the official 4.1.b.0.431 ftf with flashtool and the phone will be like new but i root my phone ( Xperia mini St15i stock 4.0.4) with this metod and work like a charm
Click to expand...
Click to collapse
Hmm okay I think both methods are working but the method with local-prop is easier and for noobs better I think
HELP NEEDED........................... Please
mihahn said:
Hmm okay I think both methods are working but the method with local-prop is easier and for noobs better I think
Click to expand...
Click to collapse
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
jesudas said:
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
Click to expand...
Click to collapse
er its not showing LED notification while using the ROM? or during boot to go into recovery ??
jesudas said:
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
Click to expand...
Click to collapse
Okay, have you got latest flashtool installed? Please install all drivers for all phones and modes from flashtool installation folder -> drivers.
Turn phone off, take off battery, insert battery, hold volume down, connect usb, flash stock rom!
That should work, try it again.
Be sure the custom rom you flash is same as the base you used before. I mean if you flash an ics custom rom, you have to be on ics before, same on gingerbread
Thanks.............
mihahn said:
Just flash the original rom with flashtool. Do it like here.
Have you been on rooted ics or rooted gingerbread? Cause I think you have to be on rooted ics to install real ics, but I don't know exactly
Click to expand...
Click to collapse
Thank you senior..............ya its my bad that i flashed this rom on rooted GB but after reading all instructions from thread i found it and re flashed with stock GB thank you for your reply........................
---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------
MoonBlade said:
er its not showing LED notification while using the ROM? or during boot to go into recovery ??
Click to expand...
Click to collapse
During Boot to recovery................ any way i found solution for this but thanks a lot for your reply thanks man...............
jesudas said:
Thank you senior..............ya its my bad that i flashed this rom on rooted GB but after reading all instructions from thread i found it and re flashed with stock GB thank you for your reply........................
---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------
During Boot to recovery................ any way i found solution for this but thanks a lot for your reply thanks man...............
Click to expand...
Click to collapse
Why don't you upgrade to ICS? that way u'll be able to use Real ICS ROM.
Hello Friend
amphe said:
OMG! THANK YOU ALL for your time to read my post and reply me!
PROBLEM SOLVED! I M SO HAPPY!
THANK YOU! THANK YOU!
Click to expand...
Click to collapse
I am having the same problem will you please let me know how the problem is solved.waiting for your valuable reply.
How to flash it..i mean after downloading stock frimware where you put files in flas
plz tell me i have same problem of that ..
Please read this!!!
People with locked bootloaders please read this
u have installed a recovery mode (using x-parts or any other methods) to your system partition. When u flash a rom, it formats system partition. so u can't go back to recovery until u bootup and install it again. to get a permanent recovery, u have to unlock bootloader and flash a kernel that have a recovery mode (it's getting installed to your boot partition). so it won't get wiped by a rom flash.
Hello ravin
You gave us the reason, and a solution for unlocked bootloaders... The question is that the problem happens in locked ones.
Anyone knows how to solve this?
There are plenty of roms for Locked Bl, so it is just a questionvof method with the Cwm installation.
Thanks for your input!
Sent from my LT26i using xda app-developers app
nrdl said:
Hello ravin
You gave us the reason, and a solution for unlocked bootloaders... The question is that the problem happens in locked ones.
Anyone knows how to solve this?
There are plenty of roms for Locked Bl, so it is just a questionvof method with the Cwm installation.
Thanks for your input!
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
You could try opening the rom.zip, replace the files in the zip with the files from cwm (can be found in the forum), zip it again and flash it
Sent from my Nexus 7 running Android 4.2.2
mihahn said:
You could try opening the rom.zip, replace the files in the zip with the files from cwm (can be found in the forum), zip it again and flash it
Sent from my Nexus 7 running Android 4.2.2
Click to expand...
Click to collapse
u mean flashing cwm also with the rom?
that's a great idea!
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
rumnheim said:
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
Click to expand...
Click to collapse
Flash a stock ftf file
or use pccompanion to repair
then try again and follow the instructions EXACTLY
rumnheim said:
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
Click to expand...
Click to collapse
Use flashtool/pcc/SEUS to flash stock firmware again!
After that don't forget to wipe things!!
P.s.- if u aren't able to post probs in official thread due to lack of posts! then pm me!
Sent From my Neo V ruining JellySandwich 5.0 using Tapatalk 2
Thanks everyone. I flashed stock rom using SEUS. Phone boot up without any problem. I rooted and installed CWM then flashed JellySandwich. JellySandwich is working very well.
Kuhhan said:
help..
Click to expand...
Click to collapse
Use flashtool to flash 587 fw
Sent from my »Neo V«
Kuhhan said:
help..
Click to expand...
Click to collapse
What's the issue you face! And what all steps you've done so far?
Sent from my MT11i using xda premium
the issue he faces is he doesnt have 10 posts..nd the steps hes done so far..or rather step is spammin..
hello everybody,i am using sony ericsson xperia neo v cyanogenmod 10 rooted and unlock bootloader....i have some issues and from a video in youtube i try to relock bootloader,now my neo v doesn't open,i try with flashtool to put stock firmware but my phone stuck in sony logo,any help please????
tasosace said:
hello everybody,i am using sony ericsson xperia neo v cyanogenmod 10 rooted and unlock bootloader....i have some issues and from a video in youtube i try to relock bootloader,now my neo v doesn't open,i try with flashtool to put stock firmware but my phone stuck in sony logo,any help please????
Click to expand...
Click to collapse
Did the flash complete successfully?did you relock bootloader?
I couldn't get you clearly!
Sent from my MT11i using xda premium
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
rspayumo said:
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
Click to expand...
Click to collapse
You need to install cm compatible kernel... Did you unlock boatloader? Fastboot s menu button and plug usb... Go into flashmode by back button plus usb and flash stock firmware...
Sent from my Xperia Neo V using xda app-developers app
rspayumo said:
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
Click to expand...
Click to collapse
Did you unlock bootloader before trying out CM based ROMs
Also a clean install is what i'd suggest
First flash The kernel inside the Zip
Then,
Wipe data,cache,dalvik cache
Format data,system,cache
Install your Rom
Also ,Fastboot is not accessed by vol up button but Menu button+plug usb
Attitude.SSJ said:
You need to install cm compatible kernel... Did you unlock boatloader? Fastboot s menu button and plug usb... Go into flashmode by back button plus usb and flash stock firmware...
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Wow! That was fast! Thank you very much! Yes, I was able to unlock the phone's bootloader via fastboot way (if you will). I was trying to install cm-10-20130609-NIGHTLY-haida. I believe haida is the correct one for Neo V? Thanks again!
Ghostfreak NB said:
Did you unlock bootloader before trying out CM based ROMs
Also a clean install is what i'd suggest
First flash The kernel inside the Zip
Then,
Wipe data,cache,dalvik cache
Format data,system,cache
Install your Rom
Also ,Fastboot is not accessed by vol up button but Menu button+plug usb
Click to expand...
Click to collapse
Thanks a lot for the fast replies! My bad on the fastboot buttons. I was able to figure that out now and also the flashmode. Right now I'm trying to download Mt11i_4.1.B.0.431_customized cenral europe 3.ftf.7z. I believe this is the stock ftf for Neo V? Another question, the boot.img is the kernel inside the cm-10-20130609-NIGHTLY-haida.zip right? Should I install it using flashmode? or should I use the CWM to install kernel? I'm really sorry for the newbie questions, I have been trying to find the answers myself but there are a ton of info and videos that always give different ways to do them. Obviously, I followed one that did not work for me. Thank you again! I'll post updates.
rspayumo said:
Wow! That was fast! Thank you very much! Yes, I was able to unlock the phone's bootloader via fastboot way (if you will). I was trying to install cm-10-20130609-NIGHTLY-haida. I believe haida is the correct one for Neo V? Thanks again!
Thanks a lot for the fast replies! My bad on the fastboot buttons. I was able to figure that out now and also the flashmode. Right now I'm trying to download Mt11i_4.1.B.0.431_customized cenral europe 3.ftf.7z. I believe this is the stock ftf for Neo V? Another question, the boot.img is the kernel inside the cm-10-20130609-NIGHTLY-haida.zip right? Should I install it using flashmode? or should I use the CWM to install kernel? I'm really sorry for the newbie questions, I have been trying to find the answers myself but there are a ton of info and videos that always give different ways to do them. Obviously, I followed one that did not work for me. Thank you again! I'll post updates.
Click to expand...
Click to collapse
Yup boot.img is the kernel
Flash it using fastboot mode
Then flash the Rom
Sent from my Neo v using xda premium
Ghostfreak NB said:
Yup boot.img is the kernel
Flash it using fastboot mode
Then flash the Rom
Sent from my Neo v using xda premium
Click to expand...
Click to collapse
Goodnews to me! I was able to revive my Neo V, big big thanks to your help. I was able to install the stock ICS ftf.
So at this time, will I start again at the beginning like root, unlock bootload, install CWM again? I'm not giving up yet on this thing. :fingers-crossed: I tried to access CWM, but it is not loading at this moment so I'm guessing I have to install that again, right? Thanks again! I hope you won't give up on my newbie questions.
rspayumo said:
Goodnews to me! I was able to revive my Neo V, big big thanks to your help. I was able to install the stock ICS ftf.
So at this time, will I start again at the beginning like root, unlock bootload, install CWM again? I'm not giving up yet on this thing. :fingers-crossed: I tried to access CWM, but it is not loading at this moment so I'm guessing I have to install that again, right? Thanks again! I hope you won't give up on my newbie questions.
Click to expand...
Click to collapse
Just flash the cm kernel... You ll get cwm... Use it to flash the rom... Don't forget to do wipes...
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
Just flash the cm kernel... You ll get cwm... Use it to flash the rom... Don't forget to do wipes...
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Will try that! Thanks sir! Big thumbs up for you! :good: I'll still post updates... :fingers-crossed:
Just to update my case, finally, I was able to install CM 10 rom successfully. I guess the one that messed my first try is the franco kernel I installed initially before installing CM 10. Thanks a lot to all who helped! I do appreciate it very much! :good:
rspayumo said:
Just to update my case, finally, I was able to install CM 10 rom successfully. I guess the one that messed my first try is the franco kernel I installed initially before installing CM 10. Thanks a lot to all who helped! I do appreciate it very much! :good:
Click to expand...
Click to collapse
franko kernel :laugh:.. that was for nexus devices :silly:... use the kernels & roms in neo forums for neo .. :good:
Flash proper kernel and stok
Hi I'm a noob and I hate myself... And I know you all hate me too.... But please can someone help me with this?
my phone : Xperia Ray ST18i
I've installed Cyanogen Mod 9.1 FXP201-cm-9-20130103-UNOFFICIAL-urushi.zip with GApps package 20120429 accordingly to this manual
......sites.google.com/site/projectfreexperia/download/howto-install
The phone works great as long the charger is connected. When I disconnect the charger the phone freezes and reboots when I use an app..
before I installed FXP201 cm9 I tried:
1. FXP201-cm-10-20130103-UNOFFICIAL-urushi.zip. (I cant install this one, freezes in CWM during install)
2. cm-9.1.0-urushi.zip + Gapps. With this one I have the same problem as with FXP201-cm-9
The phone is now back to a rooted stock GB 2.3.4 and doesn't freeze or reboots..
Can someone help me with this?
Anybody?
Try the latest FXP 202 rom or try any other custom rom and see if the problem is there, too
Sent from my Nexus 7 running Android 4.2.1
Try different kernels..
Sent from my WT19i using xda app-developers app
Use stable cm9 and use their kernel which comes along with cm9. Zip
Sent from my LiveWithWalkman using xda app-developers app
ajay74 said:
Use stable cm9 and use their kernel which comes along with cm9. Zip
Sent from my LiveWithWalkman using xda app-developers app
Click to expand...
Click to collapse
maybe a dumb question.... am I using their kernel if I use the tutorial as described on projectfreexperia or cyanogenmod.org?
mihahn said:
Try the latest FXP 202 rom or try any other custom rom and see if the problem is there, too
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
same problem with FXP203-cm-9-20130118-UNOFFICIAL-urushi... after installation, after configuring google the phone freezes at the homescreen...
Yes but better way to flash kernel is that you copy the rom.zip on your PC and extract boot.img on your desktop and then connect your phone in fastboot mode by pressing vol up key and inserting data cable and in flashtool select fastboot mode by clicking flash icon on top left then you will see a dialogue box will open in that select "select kernel to flesh" option and browse your kernel which will be boot.img now when you select that kernel flashtool well automatically flash kernel in your device check flashtool log it is saying "kernel fleshed successfully remove your mobile from PC and start it will boot In Free Xperia Project logo now install cm9 rom with cwm but before installing don't forget to wipe cache partition or delvik cache or reset and wipe data
You will see your mobile working as smooth as cream
Sent from my LiveWithWalkman using xda app-developers app
ajay74 said:
Yes but better way to flash kernel is that you copy the rom.zip on your PC and extract boot.img on your desktop and then connect your phone in fastboot mode by pressing vol up key and inserting data cable and in flashtool select fastboot mode by clicking flash icon on top left then you will see a dialogue box will open in that select "select kernel to flesh" option and browse your kernel which will be boot.img now when you select that kernel flashtool well automatically flash kernel in your device check flashtool log it is saying "kernel fleshed successfully remove your mobile from PC and start it will boot In Free Xperia Project logo now install cm9 rom with cwm but before installing don't forget to wipe cache partition or delvik cache or reset and wipe data
You will see your mobile working as smooth as cream
Sent from my LiveWithWalkman using xda app-developers app
Click to expand...
Click to collapse
this method doesn't work for me also... did every wipe etc. but it stil freezes at de google configuring wizard . except when the charger is plugged in..
i've tried different kernels now (with stock 4.0.4) and this creates the same problem.... no problems with charger connected, when disconnected within minutes my ray freezes and goes into reboot...
I tried flykernel0_8 and ctckernel-v0.8a
does anybody have some ideas for fixing this? or is this maybe a hardware problem?
So, I flashed original .58 rom in order to root my LWW, after that, I rooted it and then I tried to install cwm. I used se extreme tweak 1.8 , it finished installation and rebooted my phone and now it goes to boot loop, after boot animation it restarts and does that again. And also the LED blinks white after the bootanimation..
PLEASE HELPPPP
Rooting or installing recovery normally doesn't cause bootloop...is there anything else you did and if ur bl is locked just repair it using pc companion and then root it using kernel trick and install recovery from x-parts....the other solution I can give you is unlock your bootloader, and install a custom stock .58 based kernel(like rage) which has inbuilt recovery and start your phone....
Press THANKS if I helped,
Regards,
AJ
Sent from my SK17i using Tapatalk 2
---------- Post added at 09:49 PM ---------- Previous post was at 09:46 PM ----------
And next time please post in correct section...this is general section not q/a section
Sent from my SK17i using Tapatalk 2
It happened after trying to install cwm. I tried to flash another rom sometimes and 1 time it worked so its workink right now. I just dont know how to install cwm . I'll try it with xparts later. Thanks for fast reply.
Ur welcome buddy...:thumbup:(btw Der's always a button for that)
Regards,
AJ
Sent from my SK17i using Tapatalk 2
I have bootloader unlock no, so I cant unlock the bootloader. I tried xparts and it succesfully installed the recovery but when I reboot to recovery it simply boots normally and blue led flashes. Do you know what the problem is?
When you boot your phone as soon as the screen gets brighter or led shines just press vol-down button for some time
Sent from my SK17i using Tapatalk 2
It didnt work, it boots normally. Even in xparts, I press reboot in recovery, and it boots normally.. and recovery is already installed . what can I do
TheJoker0 said:
It didnt work, it boots normally. Even in xparts, I press reboot in recovery, and it boots normally.. and recovery is already installed . what can I do
Click to expand...
Click to collapse
Did u root ur phone??:what:
Sent from my SK17i using Tapatalk 2
TheJoker0 said:
It didnt work, it boots normally. Even in xparts, I press reboot in recovery, and it boots normally.. and recovery is already installed . what can I do
Click to expand...
Click to collapse
Keep pressing the Power button( on/off).
Hit THANKS if i helped.
when nothing goes right...
go left.
I didnt unterstand. So, its turned off, what do I press to enter recovery?
And yes, my phone is rooted
When Sony Ericsson/Sony logo shows up,keep pressing( not holding down) the on/off button till the recovery.
Works for me.
when nothing goes right...
go left.
If your mobile is accepting fastboot then the kernel trick will work
I think you might have unlocked the bootloader then it's better to flash custom kernel I think rage kernel is ideal for any firmware. Custom kernel flashing is the easiest and safest way to root.
It is the most safest method just insert your cable using this kernel
Sent from my LiveWithWalkman using xda app-developers app
hiii
i'm verry sad my wt19i making restarting when i turn it ...!!
this problem when i install new kernel !
i tryid install new kernel but alll not work the problem is still ..
i use real ice 5.2 ..!!!
pls help me
Sorry my english is bad...because i'm from iraQ
what kernel you try? change kernel to mesa or flash stock GB/ICS android
Re: [Q] Calamity mY wT19i
ESS0S said:
hiii
i'm verry sad my wt19i making restarting when i turn it ...!!
this problem when i install new kernel !
i tryid install new kernel but alll not work the problem is still ..
i use real ice 5.2 ..!!!
pls help me
Sorry my english is bad...because i'm from iraQ
Click to expand...
Click to collapse
Try flashing back to stock by doing all the wipes and then try it....if problem still continues try relocking bl, unrooting the phone and then give it to service if still in warranty.....btw if stock doesn't works try cm with its respective boot.img
Press THANKS if I helped,
Best Regards,
AJ
plllllllllllllllllllllllllllllllllllz help me
i',m I've install new kernel buT the problem not correct
my w19i Reboots itself ......
?????
ESS0S said:
plllllllllllllllllllllllllllllllllllz help me
i',m I've install new kernel buT the problem not correct
my w19i Reboots itself ......
?????
Click to expand...
Click to collapse
Do it like this:
1. Search for the cm10 kernel (use the boot.img from the FXP205 cm10 zip)
2. Place that boot.img in flashtool -> kernels (you have to create that folder)
3. Open flashtool -> Click the flash -> select fastboot mode
4. Take the battery off (your phone), wait 15 seconds and insert it again
5. Hold volume + (volume up) and while holding volume up connect the usb cable to pc (don't press the power button, just volume up and connect it)
6. Click in flashtool on "select kernel to flash"
7. Browse to "kernels" folder and select the boot.img
8. Click okay -> wait until flashing has ended (3-5 seconds)
9. Unplug phone and start it
That's it, any further questions just ask :good:
ESS0S said:
plllllllllllllllllllllllllllllllllllz help me
i',m I've install new kernel buT the problem not correct
my w19i Reboots itself ......
?????
Click to expand...
Click to collapse
Maybe the problem in rom? Try to reflash it
Sent from my Xperia Mini using xda app-developers app
Go to the thread of that rom and find which kernels are listed as supported. Download kernel. Then simply push that kernel (boot.img) via adb or flashtool.
That's all.
If not working, then I guess you haven't done full wipe before flashing that rom... Then you need to start all flashing process from the beginning.
If it's not working anyway, then you are doing something wrong - then the only thing is to return to stock rom by flashing .ftf file or to read thr install instructions of that rom VERY carefully and slowly to be sure, that you haven't missed something
Sent from my WT19i using xda app-developers app
Its kernel problem don't worry just flash right kernel you can give a try to cm9 kernel
Sent from my WT19i using xda app-developers app