Related
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
djRemov said:
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
Click to expand...
Click to collapse
is it mini or live with walkman & also NeroICS v2 only support Mini Pro..... sorry buddy!!!! yhu gonna need to use flashtool to flash yur phone.
Sent from my Mini Pro using XDA Premium
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Check that topic, try the solutions posted there.
I sent mine to service already, ROM testing killed the touchscreen.
Problem solved!
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
neocyke said:
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
Click to expand...
Click to collapse
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Do you guys have a link for the Mini Pro ROM? I'm desperate now.. =(
I still have a HYBROMAN v16 do you think that would work?
EDIT: I was able to download HYBROM_V12 but CWM keeps saying that the file is bad. Downloaded and re downloaded at least 10x now.. Any ideas?
UPDATE: For those who are having problems with their touchscreen, this method works! (finally found a working version of hybrom_v12)
@djRemov: You are a god!
djRemov said:
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Click to expand...
Click to collapse
Lemme see if I understand this right. Basically, what it does is overwrite the hex file and starts the touchscreen script? In which case it continues from the hybrom flash and replaces the hex from the minipro with the lww one?
WT19i Touchscreen Issue Solved
Solution
Follow these steps.
1) First you need to download and copy these two ROM zip files to your SD Card. The download links are given below.
a) (Note: Add (https) then //) before you enter the address which is given below in the address bar for downloading the file.)
|
V
dl.dropbox.com/u/61884099/hybrom_v10.zip
b) (Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?32i7l0w4hpfzx81
2) Switch Off your phone and flash the latest GB Stock Firmware (GB !4.0.2.A.0.62) by using Flash Tool.
You will get this Stock Firmware from here. If you have already downloaded the file, skip this download.
(Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?ervpg54922b9c0p
3) Switch on by connecting usb cable to your computer by press and hold the volume up button on your mobile for Fastboot mode . Download and extract the kernel file which i attached with this post
(kernel_coconut-v4.zip) and flash it via Fastboot Mode in Flash Tool.
4) Switch on your mobile and press the volume down button to enter the CWM Menu and do these things.
a) wipe data/factory reset
b) wipe cache partiton
c) wipe Dalvik Cache
5) After that Do 'Install zip from sdcard' and select hybrom_v10.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
6) When the installation complete, restart your phone. You will see that your touch is partially working !! Don't waste your time by checking
Touchscreen. Switch off your mobile by remove the battery and put it again.
7) Switch on your mobile and boot into CWM Mode again. Don't do these things(wipe data/factory reset, wipe cache partiton and wipe Dalvik
Cache) again for installing new zip from SDCard. (I'll tell the reason later )
Do 'Install zip from sdcard' and select hybroman_v12.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
8) After the Installation restart your phone and wait for booting into new ROM hybrom v12. Now you can see that your Touchscreen Issue is
solved !!!! :laugh:
Optional:
If you are facing wifi problem just flash the zip file via CWM (coconut_wlan_v4.zip) which is atteched with this post.
If you are not satisfied with hyvrom v12, you can also flash again the Stock Firmware or any other ROM which only supported by LWW
Cheers and Don't forget to hit the THANKS. Sorry for my bad English
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
So sad, i did but my lww still dont work, only power+walkman+home+volume buttons work.
are there any other ways to fix that problems.
and pls share hybrom_V12 for minipro. i can't search it. so i did with v10.
lww screen cant use
not work master,, any solution for me,,??
please help me master,,
djRemov said:
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Click to expand...
Click to collapse
:good:
Touch Screen Not Working SK17i
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Dear Buddy tried your method as well but still no success ????????
non of the solutions seemed to work, maybe we're facing a hardware problem
ironhide3.2 said:
non of the solutions seemed to work, maybe we're facing a hardware problem
Click to expand...
Click to collapse
try this its working .. i have been tested it twice:good::good::good::good::good::good::good:
Things we need:
Flash tools
Rage kernel gb
Stock .62 firmware for your device(ftf)
wrong rom that bricked your touchscreen
What should we do:
1:flash your device gb .62 firmware
2:flash rage kernel
3:flash that wrong rom again
4:if wrong rom was ics,rom will not boot then remove the battery to turn phone off then flash .62 firmware again if it was gb,do the same work
5:wait until stock rom boots the touch will be fixed
6:if touch screen fixed,press thanks button
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Can i use this touchscreen.zip for my st15i with the same prob???
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Just flash the original rom with flashtool. Do it like here.
Have you been on rooted ics or rooted gingerbread? Cause I think you have to be on rooted ics to install real ics, but I don't know exactly
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
Download Flashtool from HERE
DOWNLOAD official ICS firmware from HERE
Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
How to root 4.0.4 (4.1.B.0.431)
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
1 ) Download Xperia ray kernel from HERE
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and Put the kernel ( ST18i_4.1.A.0.562_kernel.ftf )
3) Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
Flashtool may show error after flashing kernel, no worries
4) After flashing restart your device, It will not start completely, remain at Sony logo or remain blank/black.
Whatever the status is, just restart your device and proceed with the rooting--->
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC and Root Your Phone
5) Download Xperia mini 4.0.4 Kernel and flash it
Your mobile is now rooted (See if any Superuser app has been installed on your phone ) and back to life
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
the most easy way to flash custom rom is to unlock your bootloader first...then flash any custom kernel that have root and CWM pre-installed...then you can flash any custom rom without any problem....
THANK YOU
OMG! THANK YOU ALL for your time to read my post and reply me!
PROBLEM SOLVED! I M SO HAPPY!
THANK YOU! THANK YOU!
danutzgtx480 said:
Download Flashtool from HERE
DOWNLOAD official ICS firmware from HERE
Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
How to root 4.0.4 (4.1.B.0.431)
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
1 ) Download Xperia ray kernel from HERE
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and Put the kernel ( ST18i_4.1.A.0.562_kernel.ftf )
3) Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
Flashtool may show error after flashing kernel, no worries
4) After flashing restart your device, It will not start completely, remain at Sony logo or remain blank/black.
Whatever the status is, just restart your device and proceed with the rooting--->
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC and Root Your Phone
5) Download Xperia mini 4.0.4 Kernel and flash it
Your mobile is now rooted (See if any Superuser app has been installed on your phone ) and back to life
Click to expand...
Click to collapse
I wouldn't do it with the kernel to flash, cause if something goes wrong you have the ray kernel on mini pro and you will have to try to unlock bootloader and flash other kernel. I would just flash the ftf file for .42 and root, run local-prop and upgrade to ics and run push-root-files.
had $tucked same situation
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
same was the problem when i rooted live with walkman... thanks to xda i came out of problem ..
problem was with kernel
i did unloked bootloader , flashed cwm and rom but i forgot to flash the kernel so i had $tucked at sonyerrison logo..
flashing computed connected worked for me
Michi_optimus_me said:
I wouldn't do it with the kernel to flash, cause if something goes wrong you have the ray kernel on mini pro and you will have to try to unlock bootloader and flash other kernel. I would just flash the ftf file for .42 and root, run local-prop and upgrade to ics and run push-root-files.
Click to expand...
Click to collapse
If something goes wrong you just flash the official 4.1.b.0.431 ftf with flashtool and the phone will be like new but i root my phone ( Xperia mini St15i stock 4.0.4) with this metod and work like a charm
danutzgtx480 said:
If something goes wrong you just flash the official 4.1.b.0.431 ftf with flashtool and the phone will be like new but i root my phone ( Xperia mini St15i stock 4.0.4) with this metod and work like a charm
Click to expand...
Click to collapse
Hmm okay I think both methods are working but the method with local-prop is easier and for noobs better I think
HELP NEEDED........................... Please
mihahn said:
Hmm okay I think both methods are working but the method with local-prop is easier and for noobs better I think
Click to expand...
Click to collapse
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
jesudas said:
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
Click to expand...
Click to collapse
er its not showing LED notification while using the ROM? or during boot to go into recovery ??
jesudas said:
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
Click to expand...
Click to collapse
Okay, have you got latest flashtool installed? Please install all drivers for all phones and modes from flashtool installation folder -> drivers.
Turn phone off, take off battery, insert battery, hold volume down, connect usb, flash stock rom!
That should work, try it again.
Be sure the custom rom you flash is same as the base you used before. I mean if you flash an ics custom rom, you have to be on ics before, same on gingerbread
Thanks.............
mihahn said:
Just flash the original rom with flashtool. Do it like here.
Have you been on rooted ics or rooted gingerbread? Cause I think you have to be on rooted ics to install real ics, but I don't know exactly
Click to expand...
Click to collapse
Thank you senior..............ya its my bad that i flashed this rom on rooted GB but after reading all instructions from thread i found it and re flashed with stock GB thank you for your reply........................
---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------
MoonBlade said:
er its not showing LED notification while using the ROM? or during boot to go into recovery ??
Click to expand...
Click to collapse
During Boot to recovery................ any way i found solution for this but thanks a lot for your reply thanks man...............
jesudas said:
Thank you senior..............ya its my bad that i flashed this rom on rooted GB but after reading all instructions from thread i found it and re flashed with stock GB thank you for your reply........................
---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------
During Boot to recovery................ any way i found solution for this but thanks a lot for your reply thanks man...............
Click to expand...
Click to collapse
Why don't you upgrade to ICS? that way u'll be able to use Real ICS ROM.
Hello Friend
amphe said:
OMG! THANK YOU ALL for your time to read my post and reply me!
PROBLEM SOLVED! I M SO HAPPY!
THANK YOU! THANK YOU!
Click to expand...
Click to collapse
I am having the same problem will you please let me know how the problem is solved.waiting for your valuable reply.
How to flash it..i mean after downloading stock frimware where you put files in flas
plz tell me i have same problem of that ..
Please read this!!!
People with locked bootloaders please read this
u have installed a recovery mode (using x-parts or any other methods) to your system partition. When u flash a rom, it formats system partition. so u can't go back to recovery until u bootup and install it again. to get a permanent recovery, u have to unlock bootloader and flash a kernel that have a recovery mode (it's getting installed to your boot partition). so it won't get wiped by a rom flash.
Hello ravin
You gave us the reason, and a solution for unlocked bootloaders... The question is that the problem happens in locked ones.
Anyone knows how to solve this?
There are plenty of roms for Locked Bl, so it is just a questionvof method with the Cwm installation.
Thanks for your input!
Sent from my LT26i using xda app-developers app
nrdl said:
Hello ravin
You gave us the reason, and a solution for unlocked bootloaders... The question is that the problem happens in locked ones.
Anyone knows how to solve this?
There are plenty of roms for Locked Bl, so it is just a questionvof method with the Cwm installation.
Thanks for your input!
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
You could try opening the rom.zip, replace the files in the zip with the files from cwm (can be found in the forum), zip it again and flash it
Sent from my Nexus 7 running Android 4.2.2
mihahn said:
You could try opening the rom.zip, replace the files in the zip with the files from cwm (can be found in the forum), zip it again and flash it
Sent from my Nexus 7 running Android 4.2.2
Click to expand...
Click to collapse
u mean flashing cwm also with the rom?
that's a great idea!
Does anyone have a stock ics backup of xperia u ST25i, because when i try to flash the stock rom via flashtool it says usb device not recongised. Plz help me. My only way to go to stock ics is to restore a backup via cwm. Help plz.
Using CM9 fxp209. Very slow!
toffe123 said:
Does anyone have a stock ics backup of xperia u ST25i, because when i try to flash the stock rom via flashtool it says usb device not recongised. Plz help me. My only way to go to stock ics is to restore a backup via cwm. Help plz.
Using CM9 fxp209. Very slow!
Click to expand...
Click to collapse
You can go to stock ics with cwm but it will get stuck in bootlogo. Cause u don't have a stock ics kernel.(fxp is not a stock kernel)
U must flash a stock kernel 1st.
Press thnx if I helped.
Sent from my ST18i
skb6T9 said:
You can go to stock ics with cwm but it will get stuck in bootlogo. Cause u don't have a stock ics kernel.(fxp is not a stock kernel)
U must flash a stock kernel 1st.
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
Correction stock kernel with CWM but a glitch is there the MD5 sum might not be detected if backed up from specific stock based kernels and flashing will be aborted ...
U can try ur luck though
Sent from my Xperia Sola using xda premium
skb6T9 said:
You can go to stock ics with cwm but it will get stuck in bootlogo. Cause u don't have a stock ics kernel.(fxp is not a stock kernel)
U must flash a stock kernel 1st.
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
First tahnks for replying, I can not flash a stock kernel becasue when i go to fastboot my pc says usb device unrecongiesd but if i am on my homescreen my pc allows me to transfer files to my phone. plz help btw i will thank you.
toffe123 said:
First tahnks for replying, I can not flash a stock kernel becasue when i go to fastboot my pc says usb device unrecongiesd but if i am on my homescreen my pc allows me to transfer files to my phone. plz help btw i will thank you.
Click to expand...
Click to collapse
Bro that means fastboot & flashtool drivers are not installed or not installed correctly..
Do this go to C:/ Flashtool /drivers/drivers.exe and install this exe file
Warning pop ups will be given by window but you will choose "install drivers anyways "
Reboot Desktop and phone then try connecting in fastboot or flashtool
Sent from my Xperia Sola using xda premium
I tried it but it does not work. flashtool drivers are
Already installed. I'm stuck with cm9? Help plz thanks
Sent from my Xperia U using xda app-developers app
have you tried fastboot another kernel and flash another rom via cwm?
or if youre on fxp kernel, just flash some other fxp based rom?
I can't fast boot anything because my PC does not detect my phone. Thanks for reply.
Sent from my Xperia U using xda app-developers app
I had similar problem with all drivers properly installed, i tried everything and nothing... until i uninstalled the "DroidExplorer" .
Probably it was some kind of driver conflict or something, so if you are using anything like that.. uninstall it and try
pirej said:
I had similar problem with all drivers properly installed, i tried everything and nothing... until i uninstalled the "DroidExplorer" .
Probably it was some kind of driver conflict or something, so if you are using anything like that.. uninstall it and try
Click to expand...
Click to collapse
can you tell me where droid explorer is located i cant find it with root uninstaller. It will be an honour if i fix this problem.:crying:
Its not in your phone, its a windows application for managing an android phone.
My point was to see if you have any drivers conflict...
When you plug the phone to your PC, what does it show in "my computer"?? When i had the problem.. in mu computer my device showed as two devices with different names.
all fixed
thnx guys the prblem is fixed all i done was enter fastboot and sony adb drivers installed thnx for your help guys. i have removed cm9 now hooray!
Prob is fixed
pirej said:
Its not in your phone, its a windows application for managing an android phone.
My point was to see if you have any drivers conflict...
When you plug the phone to your PC, what does it show in "my computer"?? When i had the problem.. in mu computer my device showed as two devices with different names.
Click to expand...
Click to collapse
Thnx but prob is fixed!!!
hi every body
I flashed my Xperia Neo using turbo Flash tool and and the progress bar stuck at 3%.
So i removed it and again flash a booy.img using fastboot mode and it got successfully flashed.
But after flashing My neo not boot any more .
when I press power button only vibrates and the screen is black.
Please help me in this.
Thanks in advance
buntu88 said:
hi every body
I flashed my Xperia Neo using turbo Flash tool and and the progress bar stuck at 3%.
So i removed it and again flash a booy.img using fastboot mode and it got successfully flashed.
But after flashing My neo not boot any more .
when I press power button only vibrates and the screen is black.
Please help me in this.
Thanks in advance
Click to expand...
Click to collapse
Flashed a wrong kernel may be.. Read instructions on threads carefully before you do things and also read before posting bro.. Many have such issues.. Reading may solve your problem..
Sent from my MT11i using xda premium
same problem
buntu88 said:
hi every body
I flashed my Xperia Neo using turbo Flash tool and and the progress bar stuck at 3%.
So i removed it and again flash a booy.img using fastboot mode and it got successfully flashed.
But after flashing My neo not boot any more .
when I press power button only vibrates and the screen is black.
Please help me in this.
Thanks in advance
Click to expand...
Click to collapse
brother\Sir.. i m facing the same problem .. i have done dat with my sony xperia neo l .. and after flashing it ..ma phone is not starting .. just vibrates and thn nothing .. i have gone through ol d comments and reply ...
so if u got ny solution kindly do tell me.. really m a help seeker right now..
sushantp606 said:
brother\Sir.. i m facing the same problem .. i have done dat with my sony xperia neo l .. and after flashing it ..ma phone is not starting .. just vibrates and thn nothing .. i have gone through ol d comments and reply ...
so if u got ny solution kindly do tell me.. really m a help seeker right now..
Click to expand...
Click to collapse
Flash the correct version for your device i think your phone is not flashed with correct version of rom like hallon for neo.
Sent from my Xperia Neo V using xda premium
paras.arora said:
Flash the correct version for your device i think your phone is not flashed with correct version of rom like hallon for neo.
Sent from my Xperia Neo V using xda premium
Click to expand...
Click to collapse
its MT11i_4.1.A.0.562_kernel...that made it worst.. now phone is nt getting start.. so how can i install another kernel widout phone screen nd flashtool...
First make sure you have full firmware .ftf not the kernel .ftf.
To fix this do following:
1. Start Flashtool
2. Click on flash icon & select Flashmode.
3. Select the ftf file.
4. IMPORTANT: See the boxes on the right & CHECK all the 'Wipe boxes' (Apps log, User data, Cache, etc.) & UNCHECK all the 'Exclude boxes' (FOTA, System, Kernel, Baseband, etc.)
5. Click OK
6. Follow the instructions on screen.
7. Boot up your phone!
Then root your phone again > install CWM Recovery > follow the guide of ROM you want to install.
You're done! Cheers!
ak070 said:
First make sure you have full firmware .ftf not the kernel .ftf.
To fix this do following:
1. Start Flashtool
2. Click on flash icon & select Flashmode.
3. Select the ftf file.
4. IMPORTANT: See the boxes on the right & CHECK all the 'Wipe boxes' (Apps log, User data, Cache, etc.) & UNCHECK all the 'Exclude boxes' (FOTA, System, Kernel, Baseband, etc.)
5. Click OK
6. Follow the instructions on screen.
7. Boot up your phone!
Then root your phone again > install CWM Recovery > follow the guide of ROM you want to install.
You're done! Cheers!
Click to expand...
Click to collapse
I had the same issue.... i was running on stock ICS with custom kernel LUPUS v8 or something.. so now coming to my problem and how did i fix them..
During experimenting i cleaned the system from recovery and didnt made backup , so i was stuck at black screen (clicking on power on button only vibrates but no screen comes ).. so i wasn't able to go into recovery mode anymore and also i tried to flash to stock Rom and other custom Rom using flashtool but it was giving error again and again.. so I was mad at myself and totally confused..
Next day i.e. Today i read this mesg i quoted and it says first flash the stock kernel and then flash the Rom..
So i downloaded and flash the kernel http://www.mediafire.com/download/i65i9fkpir4al14/MT11i_4.1.B.0.587_kernel.ftf
after that i flashed the stock Rom http://forum.xda-developers.com/showthread.php?t=1956856 n it worked.. my phone is now working again
my suggestion to everyone is that charge your phone first and wait for a day because under frustration your mind doesn't work properly..
also sorry for my bad english.. hope you can understand
please help me...
buntu88 said:
hi every body
I flashed my Xperia Neo using turbo Flash tool and and the progress bar stuck at 3%.
So i removed it and again flash a booy.img using fastboot mode and it got successfully flashed.
But after flashing My neo not boot any more .
when I press power button only vibrates and the screen is black.
Please help me in this.
Thanks in advance
Click to expand...
Click to collapse
-- i know this message are obsolete and i will accept if no body reply on this message. i have a problem same with the other user where my phone is not opening at all after flashing. is there anything i can do to fix my phone? kindly email me [email protected] i tried to charge my battery but still not opening just vbrated and red light blink all the time with black screen not showing any icon or lights on the screen at all...
Hello there!
I have rooted my phone sucsessfull, and flashed CWM, but i wanted to flash a rom (thisone: the JB version, link) i whas on .10 version (stockrom) but now i get bootloop i also cannot access CWM touch (Starting up phone and spam volume up button) What can i do?
please help!
android-freek said:
Hello there!
I have rooted my phone sucsessfull, and flashed CWM, but i wanted to flash a rom (thisone: the JB version, link) i whas on .10 version (stockrom) but now i get bootloop i also cannot access CWM touch (Starting up phone and spam volume up button) What can i do?
please help!
Click to expand...
Click to collapse
Try this press button continously( volume up or down i don't know about sola but in xperia u cwm can access using down button )
If this does not help then flash the stock ftf file using flashtool and then root again
Gud luck
Sent from my ST25i using Tapatalk
Thanks for replay, but pressing volume up or down doesnt do anything also flashing stock .TFT doesnt change anything I think my phone is bricked *very sad face*
android-freek said:
Thanks for replay, but pressing volume up or down doesnt do anything also flashing stock .TFT doesnt change anything I think my phone is bricked *very sad face*
Click to expand...
Click to collapse
Stoc rom keep boot looping?
I dont know.. I have installed that rom i posted, that bootlooped and then i flahed stock rom (V .54) that also bootloops (i think flashing faild because i get the bootanimation of that rom i posted in the top post) but do i need to check no final verification?
Can i flash a kernal with fastboot mode?
android-freek said:
Can i flash a kernal with fastboot mode?
Click to expand...
Click to collapse
yes you can. get a kernel compatible to the rom you flashed.
flashing stock rom thru flashtool might be a better idea tho. then start again from scratch, make sure you got it right this time.
gaggago47 said:
yes you can. get a kernel compatible to the rom you flashed.
flashing stock rom thru flashtool might be a better idea tho. then start again from scratch, make sure you got it right this time.
Click to expand...
Click to collapse
Do i need to check "No final verification"?
Okay, i just stated up flashtool and started flashing the .54 firmware, Checked no unkown sources. Started flashing. Flashtool finished and said i need to reboot my phone, what i did: Disconnected USB cable, waited 1 minute and booted up phone... Now i just got the "old" bootanimation... and still bootloop (from the rom in the first post) so its looks for me that flashtool "didnt flashed" my phone i also tryed sony update service but thatone said it cant flash .54 because i got constom firmware....
I got it! if flashed ONLY THE KERNAL from .54..... Who has a good .tft of the whole stock rom? And how can i charge my phone when it is in bootloop? i think my phone is almost empty now...
android-freek said:
Who has a good .tft of the whole stock rom?
Click to expand...
Click to collapse
Try to rurn it off firt, power + volume up untill you feel (1+) 3 vibrations, see if it charges then.
If you have used PC Companion before, start repair, and wait till file download is complete and PCC ask you to connect in flash mode, close PCC and built the FTF with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
rajput10906725 said:
Try this press button continously( volume up or down i don't know about sola but in xperia u cwm can access using down button )
If this does not help then flash the stock ftf file using flashtool and then root again
Gud luck
Sent from my ST25i using Tapatalk
Click to expand...
Click to collapse
hi
---------- Post added at 12:18 PM ---------- Previous post was at 12:07 PM ----------
android-freek said:
Hello there!
I have rooted my phone sucsessfull, and flashed CWM, but i wanted to flash a rom (thisone: the JB version, link) i whas on .10 version (stockrom) but now i get bootloop i also cannot access CWM touch (Starting up phone and spam volume up button) What can i do?
please help!
Click to expand...
Click to collapse
Hi
u must flash boot.img from your rom folder in flash mod and then flash yr rom from recovery mod i think it work
Hello there!
Everything worked THANK YOU ALL!!!
I re-rooted my phone and now i have CWM installed!
GREAT FORUM! THANKS ALL