hi every body
I flashed my Xperia Neo using turbo Flash tool and and the progress bar stuck at 3%.
So i removed it and again flash a booy.img using fastboot mode and it got successfully flashed.
But after flashing My neo not boot any more .
when I press power button only vibrates and the screen is black.
Please help me in this.
Thanks in advance
buntu88 said:
hi every body
I flashed my Xperia Neo using turbo Flash tool and and the progress bar stuck at 3%.
So i removed it and again flash a booy.img using fastboot mode and it got successfully flashed.
But after flashing My neo not boot any more .
when I press power button only vibrates and the screen is black.
Please help me in this.
Thanks in advance
Click to expand...
Click to collapse
Flashed a wrong kernel may be.. Read instructions on threads carefully before you do things and also read before posting bro.. Many have such issues.. Reading may solve your problem..
Sent from my MT11i using xda premium
same problem
buntu88 said:
hi every body
I flashed my Xperia Neo using turbo Flash tool and and the progress bar stuck at 3%.
So i removed it and again flash a booy.img using fastboot mode and it got successfully flashed.
But after flashing My neo not boot any more .
when I press power button only vibrates and the screen is black.
Please help me in this.
Thanks in advance
Click to expand...
Click to collapse
brother\Sir.. i m facing the same problem .. i have done dat with my sony xperia neo l .. and after flashing it ..ma phone is not starting .. just vibrates and thn nothing .. i have gone through ol d comments and reply ...
so if u got ny solution kindly do tell me.. really m a help seeker right now..
sushantp606 said:
brother\Sir.. i m facing the same problem .. i have done dat with my sony xperia neo l .. and after flashing it ..ma phone is not starting .. just vibrates and thn nothing .. i have gone through ol d comments and reply ...
so if u got ny solution kindly do tell me.. really m a help seeker right now..
Click to expand...
Click to collapse
Flash the correct version for your device i think your phone is not flashed with correct version of rom like hallon for neo.
Sent from my Xperia Neo V using xda premium
paras.arora said:
Flash the correct version for your device i think your phone is not flashed with correct version of rom like hallon for neo.
Sent from my Xperia Neo V using xda premium
Click to expand...
Click to collapse
its MT11i_4.1.A.0.562_kernel...that made it worst.. now phone is nt getting start.. so how can i install another kernel widout phone screen nd flashtool...
First make sure you have full firmware .ftf not the kernel .ftf.
To fix this do following:
1. Start Flashtool
2. Click on flash icon & select Flashmode.
3. Select the ftf file.
4. IMPORTANT: See the boxes on the right & CHECK all the 'Wipe boxes' (Apps log, User data, Cache, etc.) & UNCHECK all the 'Exclude boxes' (FOTA, System, Kernel, Baseband, etc.)
5. Click OK
6. Follow the instructions on screen.
7. Boot up your phone!
Then root your phone again > install CWM Recovery > follow the guide of ROM you want to install.
You're done! Cheers!
ak070 said:
First make sure you have full firmware .ftf not the kernel .ftf.
To fix this do following:
1. Start Flashtool
2. Click on flash icon & select Flashmode.
3. Select the ftf file.
4. IMPORTANT: See the boxes on the right & CHECK all the 'Wipe boxes' (Apps log, User data, Cache, etc.) & UNCHECK all the 'Exclude boxes' (FOTA, System, Kernel, Baseband, etc.)
5. Click OK
6. Follow the instructions on screen.
7. Boot up your phone!
Then root your phone again > install CWM Recovery > follow the guide of ROM you want to install.
You're done! Cheers!
Click to expand...
Click to collapse
I had the same issue.... i was running on stock ICS with custom kernel LUPUS v8 or something.. so now coming to my problem and how did i fix them..
During experimenting i cleaned the system from recovery and didnt made backup , so i was stuck at black screen (clicking on power on button only vibrates but no screen comes ).. so i wasn't able to go into recovery mode anymore and also i tried to flash to stock Rom and other custom Rom using flashtool but it was giving error again and again.. so I was mad at myself and totally confused..
Next day i.e. Today i read this mesg i quoted and it says first flash the stock kernel and then flash the Rom..
So i downloaded and flash the kernel http://www.mediafire.com/download/i65i9fkpir4al14/MT11i_4.1.B.0.587_kernel.ftf
after that i flashed the stock Rom http://forum.xda-developers.com/showthread.php?t=1956856 n it worked.. my phone is now working again
my suggestion to everyone is that charge your phone first and wait for a day because under frustration your mind doesn't work properly..
also sorry for my bad english.. hope you can understand
please help me...
buntu88 said:
hi every body
I flashed my Xperia Neo using turbo Flash tool and and the progress bar stuck at 3%.
So i removed it and again flash a booy.img using fastboot mode and it got successfully flashed.
But after flashing My neo not boot any more .
when I press power button only vibrates and the screen is black.
Please help me in this.
Thanks in advance
Click to expand...
Click to collapse
-- i know this message are obsolete and i will accept if no body reply on this message. i have a problem same with the other user where my phone is not opening at all after flashing. is there anything i can do to fix my phone? kindly email me [email protected] i tried to charge my battery but still not opening just vbrated and red light blink all the time with black screen not showing any icon or lights on the screen at all...
Related
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Just flash the original rom with flashtool. Do it like here.
Have you been on rooted ics or rooted gingerbread? Cause I think you have to be on rooted ics to install real ics, but I don't know exactly
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
Download Flashtool from HERE
DOWNLOAD official ICS firmware from HERE
Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
How to root 4.0.4 (4.1.B.0.431)
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
1 ) Download Xperia ray kernel from HERE
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and Put the kernel ( ST18i_4.1.A.0.562_kernel.ftf )
3) Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
Flashtool may show error after flashing kernel, no worries
4) After flashing restart your device, It will not start completely, remain at Sony logo or remain blank/black.
Whatever the status is, just restart your device and proceed with the rooting--->
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC and Root Your Phone
5) Download Xperia mini 4.0.4 Kernel and flash it
Your mobile is now rooted (See if any Superuser app has been installed on your phone ) and back to life
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
the most easy way to flash custom rom is to unlock your bootloader first...then flash any custom kernel that have root and CWM pre-installed...then you can flash any custom rom without any problem....
THANK YOU
OMG! THANK YOU ALL for your time to read my post and reply me!
PROBLEM SOLVED! I M SO HAPPY!
THANK YOU! THANK YOU!
danutzgtx480 said:
Download Flashtool from HERE
DOWNLOAD official ICS firmware from HERE
Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
How to root 4.0.4 (4.1.B.0.431)
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
1 ) Download Xperia ray kernel from HERE
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and Put the kernel ( ST18i_4.1.A.0.562_kernel.ftf )
3) Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
Flashtool may show error after flashing kernel, no worries
4) After flashing restart your device, It will not start completely, remain at Sony logo or remain blank/black.
Whatever the status is, just restart your device and proceed with the rooting--->
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC and Root Your Phone
5) Download Xperia mini 4.0.4 Kernel and flash it
Your mobile is now rooted (See if any Superuser app has been installed on your phone ) and back to life
Click to expand...
Click to collapse
I wouldn't do it with the kernel to flash, cause if something goes wrong you have the ray kernel on mini pro and you will have to try to unlock bootloader and flash other kernel. I would just flash the ftf file for .42 and root, run local-prop and upgrade to ics and run push-root-files.
had $tucked same situation
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
same was the problem when i rooted live with walkman... thanks to xda i came out of problem ..
problem was with kernel
i did unloked bootloader , flashed cwm and rom but i forgot to flash the kernel so i had $tucked at sonyerrison logo..
flashing computed connected worked for me
Michi_optimus_me said:
I wouldn't do it with the kernel to flash, cause if something goes wrong you have the ray kernel on mini pro and you will have to try to unlock bootloader and flash other kernel. I would just flash the ftf file for .42 and root, run local-prop and upgrade to ics and run push-root-files.
Click to expand...
Click to collapse
If something goes wrong you just flash the official 4.1.b.0.431 ftf with flashtool and the phone will be like new but i root my phone ( Xperia mini St15i stock 4.0.4) with this metod and work like a charm
danutzgtx480 said:
If something goes wrong you just flash the official 4.1.b.0.431 ftf with flashtool and the phone will be like new but i root my phone ( Xperia mini St15i stock 4.0.4) with this metod and work like a charm
Click to expand...
Click to collapse
Hmm okay I think both methods are working but the method with local-prop is easier and for noobs better I think
HELP NEEDED........................... Please
mihahn said:
Hmm okay I think both methods are working but the method with local-prop is easier and for noobs better I think
Click to expand...
Click to collapse
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
jesudas said:
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
Click to expand...
Click to collapse
er its not showing LED notification while using the ROM? or during boot to go into recovery ??
jesudas said:
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
Click to expand...
Click to collapse
Okay, have you got latest flashtool installed? Please install all drivers for all phones and modes from flashtool installation folder -> drivers.
Turn phone off, take off battery, insert battery, hold volume down, connect usb, flash stock rom!
That should work, try it again.
Be sure the custom rom you flash is same as the base you used before. I mean if you flash an ics custom rom, you have to be on ics before, same on gingerbread
Thanks.............
mihahn said:
Just flash the original rom with flashtool. Do it like here.
Have you been on rooted ics or rooted gingerbread? Cause I think you have to be on rooted ics to install real ics, but I don't know exactly
Click to expand...
Click to collapse
Thank you senior..............ya its my bad that i flashed this rom on rooted GB but after reading all instructions from thread i found it and re flashed with stock GB thank you for your reply........................
---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------
MoonBlade said:
er its not showing LED notification while using the ROM? or during boot to go into recovery ??
Click to expand...
Click to collapse
During Boot to recovery................ any way i found solution for this but thanks a lot for your reply thanks man...............
jesudas said:
Thank you senior..............ya its my bad that i flashed this rom on rooted GB but after reading all instructions from thread i found it and re flashed with stock GB thank you for your reply........................
---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------
During Boot to recovery................ any way i found solution for this but thanks a lot for your reply thanks man...............
Click to expand...
Click to collapse
Why don't you upgrade to ICS? that way u'll be able to use Real ICS ROM.
Hello Friend
amphe said:
OMG! THANK YOU ALL for your time to read my post and reply me!
PROBLEM SOLVED! I M SO HAPPY!
THANK YOU! THANK YOU!
Click to expand...
Click to collapse
I am having the same problem will you please let me know how the problem is solved.waiting for your valuable reply.
How to flash it..i mean after downloading stock frimware where you put files in flas
plz tell me i have same problem of that ..
Please read this!!!
People with locked bootloaders please read this
u have installed a recovery mode (using x-parts or any other methods) to your system partition. When u flash a rom, it formats system partition. so u can't go back to recovery until u bootup and install it again. to get a permanent recovery, u have to unlock bootloader and flash a kernel that have a recovery mode (it's getting installed to your boot partition). so it won't get wiped by a rom flash.
Hello ravin
You gave us the reason, and a solution for unlocked bootloaders... The question is that the problem happens in locked ones.
Anyone knows how to solve this?
There are plenty of roms for Locked Bl, so it is just a questionvof method with the Cwm installation.
Thanks for your input!
Sent from my LT26i using xda app-developers app
nrdl said:
Hello ravin
You gave us the reason, and a solution for unlocked bootloaders... The question is that the problem happens in locked ones.
Anyone knows how to solve this?
There are plenty of roms for Locked Bl, so it is just a questionvof method with the Cwm installation.
Thanks for your input!
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
You could try opening the rom.zip, replace the files in the zip with the files from cwm (can be found in the forum), zip it again and flash it
Sent from my Nexus 7 running Android 4.2.2
mihahn said:
You could try opening the rom.zip, replace the files in the zip with the files from cwm (can be found in the forum), zip it again and flash it
Sent from my Nexus 7 running Android 4.2.2
Click to expand...
Click to collapse
u mean flashing cwm also with the rom?
that's a great idea!
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
rumnheim said:
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
Click to expand...
Click to collapse
Flash a stock ftf file
or use pccompanion to repair
then try again and follow the instructions EXACTLY
rumnheim said:
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
Click to expand...
Click to collapse
Use flashtool/pcc/SEUS to flash stock firmware again!
After that don't forget to wipe things!!
P.s.- if u aren't able to post probs in official thread due to lack of posts! then pm me!
Sent From my Neo V ruining JellySandwich 5.0 using Tapatalk 2
Thanks everyone. I flashed stock rom using SEUS. Phone boot up without any problem. I rooted and installed CWM then flashed JellySandwich. JellySandwich is working very well.
Kuhhan said:
help..
Click to expand...
Click to collapse
Use flashtool to flash 587 fw
Sent from my »Neo V«
Kuhhan said:
help..
Click to expand...
Click to collapse
What's the issue you face! And what all steps you've done so far?
Sent from my MT11i using xda premium
the issue he faces is he doesnt have 10 posts..nd the steps hes done so far..or rather step is spammin..
hello everybody,i am using sony ericsson xperia neo v cyanogenmod 10 rooted and unlock bootloader....i have some issues and from a video in youtube i try to relock bootloader,now my neo v doesn't open,i try with flashtool to put stock firmware but my phone stuck in sony logo,any help please????
tasosace said:
hello everybody,i am using sony ericsson xperia neo v cyanogenmod 10 rooted and unlock bootloader....i have some issues and from a video in youtube i try to relock bootloader,now my neo v doesn't open,i try with flashtool to put stock firmware but my phone stuck in sony logo,any help please????
Click to expand...
Click to collapse
Did the flash complete successfully?did you relock bootloader?
I couldn't get you clearly!
Sent from my MT11i using xda premium
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
rspayumo said:
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
Click to expand...
Click to collapse
You need to install cm compatible kernel... Did you unlock boatloader? Fastboot s menu button and plug usb... Go into flashmode by back button plus usb and flash stock firmware...
Sent from my Xperia Neo V using xda app-developers app
rspayumo said:
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
Click to expand...
Click to collapse
Did you unlock bootloader before trying out CM based ROMs
Also a clean install is what i'd suggest
First flash The kernel inside the Zip
Then,
Wipe data,cache,dalvik cache
Format data,system,cache
Install your Rom
Also ,Fastboot is not accessed by vol up button but Menu button+plug usb
Attitude.SSJ said:
You need to install cm compatible kernel... Did you unlock boatloader? Fastboot s menu button and plug usb... Go into flashmode by back button plus usb and flash stock firmware...
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Wow! That was fast! Thank you very much! Yes, I was able to unlock the phone's bootloader via fastboot way (if you will). I was trying to install cm-10-20130609-NIGHTLY-haida. I believe haida is the correct one for Neo V? Thanks again!
Ghostfreak NB said:
Did you unlock bootloader before trying out CM based ROMs
Also a clean install is what i'd suggest
First flash The kernel inside the Zip
Then,
Wipe data,cache,dalvik cache
Format data,system,cache
Install your Rom
Also ,Fastboot is not accessed by vol up button but Menu button+plug usb
Click to expand...
Click to collapse
Thanks a lot for the fast replies! My bad on the fastboot buttons. I was able to figure that out now and also the flashmode. Right now I'm trying to download Mt11i_4.1.B.0.431_customized cenral europe 3.ftf.7z. I believe this is the stock ftf for Neo V? Another question, the boot.img is the kernel inside the cm-10-20130609-NIGHTLY-haida.zip right? Should I install it using flashmode? or should I use the CWM to install kernel? I'm really sorry for the newbie questions, I have been trying to find the answers myself but there are a ton of info and videos that always give different ways to do them. Obviously, I followed one that did not work for me. Thank you again! I'll post updates.
rspayumo said:
Wow! That was fast! Thank you very much! Yes, I was able to unlock the phone's bootloader via fastboot way (if you will). I was trying to install cm-10-20130609-NIGHTLY-haida. I believe haida is the correct one for Neo V? Thanks again!
Thanks a lot for the fast replies! My bad on the fastboot buttons. I was able to figure that out now and also the flashmode. Right now I'm trying to download Mt11i_4.1.B.0.431_customized cenral europe 3.ftf.7z. I believe this is the stock ftf for Neo V? Another question, the boot.img is the kernel inside the cm-10-20130609-NIGHTLY-haida.zip right? Should I install it using flashmode? or should I use the CWM to install kernel? I'm really sorry for the newbie questions, I have been trying to find the answers myself but there are a ton of info and videos that always give different ways to do them. Obviously, I followed one that did not work for me. Thank you again! I'll post updates.
Click to expand...
Click to collapse
Yup boot.img is the kernel
Flash it using fastboot mode
Then flash the Rom
Sent from my Neo v using xda premium
Ghostfreak NB said:
Yup boot.img is the kernel
Flash it using fastboot mode
Then flash the Rom
Sent from my Neo v using xda premium
Click to expand...
Click to collapse
Goodnews to me! I was able to revive my Neo V, big big thanks to your help. I was able to install the stock ICS ftf.
So at this time, will I start again at the beginning like root, unlock bootload, install CWM again? I'm not giving up yet on this thing. :fingers-crossed: I tried to access CWM, but it is not loading at this moment so I'm guessing I have to install that again, right? Thanks again! I hope you won't give up on my newbie questions.
rspayumo said:
Goodnews to me! I was able to revive my Neo V, big big thanks to your help. I was able to install the stock ICS ftf.
So at this time, will I start again at the beginning like root, unlock bootload, install CWM again? I'm not giving up yet on this thing. :fingers-crossed: I tried to access CWM, but it is not loading at this moment so I'm guessing I have to install that again, right? Thanks again! I hope you won't give up on my newbie questions.
Click to expand...
Click to collapse
Just flash the cm kernel... You ll get cwm... Use it to flash the rom... Don't forget to do wipes...
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
Just flash the cm kernel... You ll get cwm... Use it to flash the rom... Don't forget to do wipes...
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Will try that! Thanks sir! Big thumbs up for you! :good: I'll still post updates... :fingers-crossed:
Just to update my case, finally, I was able to install CM 10 rom successfully. I guess the one that messed my first try is the franco kernel I installed initially before installing CM 10. Thanks a lot to all who helped! I do appreciate it very much! :good:
rspayumo said:
Just to update my case, finally, I was able to install CM 10 rom successfully. I guess the one that messed my first try is the franco kernel I installed initially before installing CM 10. Thanks a lot to all who helped! I do appreciate it very much! :good:
Click to expand...
Click to collapse
franko kernel :laugh:.. that was for nexus devices :silly:... use the kernels & roms in neo forums for neo .. :good:
Flash proper kernel and stok
Hi
I did Wipe Data/Factory Reset and format/system , later on before doing rest of the steps , I restarted my phone, now I am stuck at "SONY" logo and cwm menu is not loading ... How to proceed further ? Thanks this is a great community
linux_devil said:
Hi
I did Wipe Data/Factory Reset and format/system , later on before doing rest of the steps , I restarted my phone, now I am stuck at "SONY" logo and cwm menu is not loading ... How to proceed further ? Thanks this is a great community
Click to expand...
Click to collapse
Please provide more information man...
you formatted system..and cant get into CWM..so locked bootloader....jus flash back original firmware using flashtool..
linux_devil said:
Hi
I did Wipe Data/Factory Reset and format/system , later on before doing rest of the steps , I restarted my phone, now I am stuck at "SONY" logo and cwm menu is not loading ... How to proceed further ? Thanks this is a great community
Click to expand...
Click to collapse
I happened to soft-brick my Neo V few days back after installing a custom ROM. Please read on to see what helped me get my Neo V up and running again.
If your phone is stuck at SONY logo, I doubt it will go into CWM recovery mode either. I had tried flashing stock kernel through Flashtool, and also tried the FOTA-Unbrick method via flashtool, but even that didn't help. Finally, I used the "repair" option in PC Companion which flashed Stock ICS ROM on my Neo V (however, all data on phone's internal memory was lost and my phone had to e rooted again). But at least my phone was recovered. Hope this will guide you.
Details Please!!
Details details !!!:fingers-crossed:
Without the details, people cannot help you!!!
From your statement, i beleive your's is rooted and CWM installed.
But let us know whether BL is unllocked?. I guess its not..
So first of all, the ROM you choose should be supporting BL unlocked phones.
let us know the firmware which you were earlier and the ROM which you tried to flash and the BOOTLOADER status.
NEO V | PAC MAN 18
Hit Thanks if my words lightened you hair
turn off device.
connect to pc on flash mode.
use flashtool to flash stock firmware.
at least thats what i do when my phone end up stuck in sony logo or bootloop.
linux_devil said:
Hi
I did Wipe Data/Factory Reset and format/system , later on before doing rest of the steps , I restarted my phone, now I am stuck at "SONY" logo and cwm menu is not loading ... How to proceed further ? Thanks this is a great community
Click to expand...
Click to collapse
Not enough information bro.. are u on locked or unlocked bootloader?
Sent from my MT11i using xda app-developers app
Thanks everyone problem fixed
Sent from my Xperia Neo V using xda app-developers app super jelly bean
linux_devil said:
Thanks everyone problem fixed
Sent from my Xperia Neo V using xda app-developers app super jelly bean
Click to expand...
Click to collapse
Really? After three months??
Sent from my Xperia Neo V using xda app-developers app
hiii
i'm verry sad my wt19i making restarting when i turn it ...!!
this problem when i install new kernel !
i tryid install new kernel but alll not work the problem is still ..
i use real ice 5.2 ..!!!
pls help me
Sorry my english is bad...because i'm from iraQ
what kernel you try? change kernel to mesa or flash stock GB/ICS android
Re: [Q] Calamity mY wT19i
ESS0S said:
hiii
i'm verry sad my wt19i making restarting when i turn it ...!!
this problem when i install new kernel !
i tryid install new kernel but alll not work the problem is still ..
i use real ice 5.2 ..!!!
pls help me
Sorry my english is bad...because i'm from iraQ
Click to expand...
Click to collapse
Try flashing back to stock by doing all the wipes and then try it....if problem still continues try relocking bl, unrooting the phone and then give it to service if still in warranty.....btw if stock doesn't works try cm with its respective boot.img
Press THANKS if I helped,
Best Regards,
AJ
plllllllllllllllllllllllllllllllllllz help me
i',m I've install new kernel buT the problem not correct
my w19i Reboots itself ......
?????
ESS0S said:
plllllllllllllllllllllllllllllllllllz help me
i',m I've install new kernel buT the problem not correct
my w19i Reboots itself ......
?????
Click to expand...
Click to collapse
Do it like this:
1. Search for the cm10 kernel (use the boot.img from the FXP205 cm10 zip)
2. Place that boot.img in flashtool -> kernels (you have to create that folder)
3. Open flashtool -> Click the flash -> select fastboot mode
4. Take the battery off (your phone), wait 15 seconds and insert it again
5. Hold volume + (volume up) and while holding volume up connect the usb cable to pc (don't press the power button, just volume up and connect it)
6. Click in flashtool on "select kernel to flash"
7. Browse to "kernels" folder and select the boot.img
8. Click okay -> wait until flashing has ended (3-5 seconds)
9. Unplug phone and start it
That's it, any further questions just ask :good:
ESS0S said:
plllllllllllllllllllllllllllllllllllz help me
i',m I've install new kernel buT the problem not correct
my w19i Reboots itself ......
?????
Click to expand...
Click to collapse
Maybe the problem in rom? Try to reflash it
Sent from my Xperia Mini using xda app-developers app
Go to the thread of that rom and find which kernels are listed as supported. Download kernel. Then simply push that kernel (boot.img) via adb or flashtool.
That's all.
If not working, then I guess you haven't done full wipe before flashing that rom... Then you need to start all flashing process from the beginning.
If it's not working anyway, then you are doing something wrong - then the only thing is to return to stock rom by flashing .ftf file or to read thr install instructions of that rom VERY carefully and slowly to be sure, that you haven't missed something
Sent from my WT19i using xda app-developers app
Its kernel problem don't worry just flash right kernel you can give a try to cm9 kernel
Sent from my WT19i using xda app-developers app
Hi guys, i've read many posts but my problem is still here. Yesterday I've rooted my friend's XP Ray, everything works fine. I told him 'Make this ****ing backup first' but noo, he flashed this (Build 14 SP1)on stock ICS. He gets bootlop, sure. I've tried wiping cache, dalvik cahce, factory reset but nothing changed. But this morning he tried starts his phone and the phone stuck at SONY logo. Can't boot to cwm. I've tried flash stock kernel using flashtool. Flash was succesful, but nothing changed still stuck at sony logo. Can you please help him? Thanks for replies
soxxO_o said:
Hi guys, i've read many posts but my problem is still here.
Click to expand...
Click to collapse
Then you're doing something wrong, and there is a thread a day about this one issue now. Flash a stock ftf and report back.
Flashed.."flash succesful disconect and start your device" nothing changed still on Sony logo
Sent from Arc S using XDA Premium
What is the size of the ftf you're flashing?
XperienceD said:
What is the size of the ftf you're flashing?
Click to expand...
Click to collapse
4,640 kB
soxxO_o said:
4,640 kB
Click to expand...
Click to collapse
That's just a kernel then, you need a ROM, which is 250,000KB upwards, so get a ROM ftf and try again if you haven't already.
soxxO_o said:
Hi guys, i've read many posts but my problem is still here. Yesterday I've rooted my friend's XP Ray, everything works fine. I told him 'Make this ****ing backup first' but noo, he flashed this (Build 14 SP1)on stock ICS. He gets bootlop, sure. I've tried wiping cache, dalvik cahce, factory reset but nothing changed. But this morning he tried starts his phone and the phone stuck at SONY logo. Can't boot to cwm. I've tried flash stock kernel using flashtool. Flash was succesful, but nothing changed still stuck at sony logo. Can you please help him? Thanks for replies
Click to expand...
Click to collapse
Try Download it and flash it with flashtool..
http://www.mediafire.com/download/pp48w8v9z1adg59/ST18i_4.1.B.0.587_CE_1252-3693_ForsakenNGL.rar
hit thanks if i helped..
XperienceD said:
That's just a kernel then, you need a ROM, which is 250,000KB upwards, so get a ROM ftf and try again if you haven't already.
Click to expand...
Click to collapse
i flash the device already with ftf file but still my phone stuck on sony logo
pls reply as soon as possible and help me
omarahamed14 said:
i flash the device already with ftf file but still my phone stuck on sony logo
pls reply as soon as possible and help me
Click to expand...
Click to collapse
than u do sth wrong. if u flash it correctly (and ur device not broken) all should be fine its like a factory reset
follow this TUT exactly. dl there also the latest FW for ur phone (ftf), then flash usinf flasgtool
http://talk.sonymobile.com/t5/Android-development/GUIDE-How-to-Install-Jelly-Bean-ICS-Ice-Cream-Sandwich-and/td-p/154389
im on this situation too. flash many ftf file and many costum kernel but always stuck in kernel logo. any idea ?
same problem
I'm trying in every way but nothing worked...
Have you resolved it?
mrahmanda said:
im on this situation too. flash many ftf file and many costum kernel but always stuck in kernel logo. any idea ?
Click to expand...
Click to collapse
Is your device unlocked bootloader?
Flashing kernel need unlocked bootloader device.
Did u try using SEUS or PCC ?
Sent from my ST18i using XDA Free mobile app
xperia ray stuck at logo and continuosly appear 'sony ericsson' logo
[HELP] [HELP] [HELP]
two days ago i install CWM on my sony xperia ray from xrecovery to install super jellybean rom 8.0
i do all things which shown
i do 'wipe data/facory reset'
'wipe system'
'wipe cache partition'
and install gapps only
then i reboot device
after that it stuck at its logo and doing nothing
i tried many methods but can't do anything it not connect at pc companian and flash tool it switch on and stuck at logo
please please help me for this
REQUEST
thank you