Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Couldn't find much on this tablet. I would also like to do the same as you. My wife won this tablet at an arcade and think it would be a pretty decent unit if it didn't run so slow. Did you manage to find anything out? I'm going to look around myself. I've been doing AOKP builds, I might sync up Troys and mess around with it this week.
No info still. I don't have an experience in building the compatibility patches. But it should be doable with files I've provided and someone who can do it.
NStorm said:
Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Click to expand...
Click to collapse
Kocaso M1050S the .img link is broken. I will be grateful if you able to provide me with correct one. and another question: how did you install CWM recovery. thx in advance.
Same here, haven't had time to try and mess with it. I'm going to download a pack and see whats done in there. I'm going to switch into Ubuntu in a few and try and sync with CT's git as well.
I installed CWM 6.0.1.2 using this tutorial :
http://forum.xda-developers.com/showthread.php?t=1802268
It seems to work so far. It reads my SD card and I was able to perform a backup. I've done nothing else at all with it yet so i'm not sure if it's really working properly but so far my device is still working fine.
---------- Post added at 07:58 PM ---------- Previous post was at 07:52 PM ----------
Also I got the files you are looking for from another site.
Google this exactly :
MID_M1050s(chinese) bricked at android screen
As i'm unsure if outside links are ok here. It should be the first result. It's posted further down the thread.
Right, here is the new download link for firmware: docs.google.com/folder/d/0B_88d7OJP9HPWWEwejlSQkQ0X2s/edit
I'm still looking for CM10 mod...
working one for me
NStorm said:
Right, here is the new download link for firmware: docs.google.com/folder/d/0B_88d7OJP9HPWWEwejlSQkQ0X2s/edit
I'm still looking for CM10 mod...
Click to expand...
Click to collapse
Thank you! But this firmware stops at 3 percent of flashing.
I finally found a working version and http://www.irexsoft.com/M1050_bc1003.img
I think that we can take device drivers from it for CM10)
kocaso m760 stuck in bootloop.....kind of
NStorm said:
Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Click to expand...
Click to collapse
hi there i hate to be a noob but i have a kocaso m760. i tried the vold fstab memory swap trick, now im in bootloop, but the tablet will only work while plug and accessed by adb. when i unplug it bootloops. i downloaded my devices firmware, but cant find a .img file to restore to. any suggestions would help. thanx
Alright so here is my problem, i really like this ROM ---> [ROM][Arc/S][+PRO]|C.A.M.P.S+™|CM10|AOKP|PA|MIUI|SONY|V05 FINAL|Released~
but i can't download it because the file was set to private, that means i cant access it. I don't have sufficient privileges to ask the developer myself, so please can someone help me? if you can give me a link to download it it would be appreciated (I already googled it, it all lead to the same link), or ask the guy to make the download link public for everyone to download it.
Thanks.
Link to the ROM's thread: http://forum.xda-developers.com/showthread.php?t=1928416
EDIT: When there was no reply here after a day (and this post was pushed to the fifth page), i posted a similar quesiton to another forum, and later posted a solution there. If someone wants to delete this post, that's fine with me.
- Link to other post, with solution: http://forum.xda-developers.com/htc-one-m8/help/pls-help-teamviewer-qs-add-htc-t3047061
Hello,
I'm looking for TeamViewer's QuickSupport (QS) Add-on for HTC devices. Unforunately I can't access Google Play to download it (to see it for yourself, look for com.teamviewer.quicksupport.addon.htc)
Does anyone know where else I can find it, EDIT: from a reliable source, not a random site that might have repackaged it; or
Or, could someone who has the APK file tell me who signed theirs, and then I can determine if the copy I downloaded from a shady site is legitimate
Or, someone with the APK file could post its size in bytes
Or, does anyone know if the Samsung version will work on HTC phones? I can get the Samsung version directly from TeamViewer's website (but not the HTC version).
For those wondering what exactly this is: I have the main TeamViewer QuickSupport app installed. It does not include screen-sharing; to do that, I need the add-on.
Many thanks in advance!
EDIT:
This tweet from TeamViewer support, dated a few weeks ago, says the addon is not available in the U.S. Has anyone managed to get ahold of it? (I can't post links yet, so copy the following and append it to twitter.com:
/pakdirect/status/568158224966246400
EDIT2:
TeamViewer tech support, responding to an email I sent, says the addon is available only in Europe.
Hi guys, I'm currently on AllianceROM, but I'm having a bit of trouble on it, and I want to try another Rom. Project Infinity looks really good with the aroma installer and the use of Viper...unfortunately, the download appears to not to be working. I've browsed the thread but no one has mentioned it disappearing. I've googled searched it and the only version I've found was v6.0. Can anyone direct me to the download or if you already have the file on your computer, could you possibly put it on this thread so I can download it please?
Thanks in advance
I was wandering through the ROMs available for the Redmi Note 2 on ydss.cn, and found one posted today that triggered my curiousity because of the supposed long battery life (from the little I understand, after google translates it).
Unfortunately, I can't download anything from the pan.baidu cloud, so I would appreciate the help of anyone able to download the ROM and reupload somewhere else, like google drive.
The ROM post is here: http://bbs.ydss.cn/thread-651718-1-1.html
And the download link is: http://pan.baidu.com/s/1dFeAJ5n (password: oy9a)
Thanks in advance.
Use jdownloader, you don't even need an account, but if you want...
https://www.reddit.com/r/China/comments/4annpq/helpadvice_how_to_create_a_baidu_account/