Hi everyone,
Sorry if this question has already been asked before, but i couldn't find it out.
One day i saw a link on xda to a website who explain alot about how android is working, kernel ramdisk, how to extract ...
And i can't remember the name of this website.
so can someone give me a direction to tutorial on how modify kernel, port rom etc...
Thank you
EDIT::
Well, i'm confused, i finally found this website:
http://www.freeyourandroid.com/
But if you have other link it would be nice
Hello,
yesterday I tried to download mik_os's cyanogenmod 7.1.0 from multiupload.com without success. The website is down and with it a lot of roms/files are unreachable. I would like to use this rom on my P500, somebody can give me a new link to download it?
Thanks,
melrief
melrief said:
Hello,
yesterday I tried to download mik_os's cyanogenmod 7.1.0 from multiupload.com without success. The website is down and with it a lot of roms/files are unreachable. I would like to use this rom on my P500, somebody can give me a new link to download it?
Thanks,
melrief
Click to expand...
Click to collapse
This post should be helpful: http://forum.xda-developers.com/showpost.php?p=22662303&postcount=2455
Sorry for the duplicated request, I didn't find that post. Thanks.
Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Couldn't find much on this tablet. I would also like to do the same as you. My wife won this tablet at an arcade and think it would be a pretty decent unit if it didn't run so slow. Did you manage to find anything out? I'm going to look around myself. I've been doing AOKP builds, I might sync up Troys and mess around with it this week.
No info still. I don't have an experience in building the compatibility patches. But it should be doable with files I've provided and someone who can do it.
NStorm said:
Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Click to expand...
Click to collapse
Kocaso M1050S the .img link is broken. I will be grateful if you able to provide me with correct one. and another question: how did you install CWM recovery. thx in advance.
Same here, haven't had time to try and mess with it. I'm going to download a pack and see whats done in there. I'm going to switch into Ubuntu in a few and try and sync with CT's git as well.
I installed CWM 6.0.1.2 using this tutorial :
http://forum.xda-developers.com/showthread.php?t=1802268
It seems to work so far. It reads my SD card and I was able to perform a backup. I've done nothing else at all with it yet so i'm not sure if it's really working properly but so far my device is still working fine.
---------- Post added at 07:58 PM ---------- Previous post was at 07:52 PM ----------
Also I got the files you are looking for from another site.
Google this exactly :
MID_M1050s(chinese) bricked at android screen
As i'm unsure if outside links are ok here. It should be the first result. It's posted further down the thread.
Right, here is the new download link for firmware: docs.google.com/folder/d/0B_88d7OJP9HPWWEwejlSQkQ0X2s/edit
I'm still looking for CM10 mod...
working one for me
NStorm said:
Right, here is the new download link for firmware: docs.google.com/folder/d/0B_88d7OJP9HPWWEwejlSQkQ0X2s/edit
I'm still looking for CM10 mod...
Click to expand...
Click to collapse
Thank you! But this firmware stops at 3 percent of flashing.
I finally found a working version and http://www.irexsoft.com/M1050_bc1003.img
I think that we can take device drivers from it for CM10)
kocaso m760 stuck in bootloop.....kind of
NStorm said:
Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Click to expand...
Click to collapse
hi there i hate to be a noob but i have a kocaso m760. i tried the vold fstab memory swap trick, now im in bootloop, but the tablet will only work while plug and accessed by adb. when i unplug it bootloops. i downloaded my devices firmware, but cant find a .img file to restore to. any suggestions would help. thanx
Hello,
I finally got around to putting Viper 3D on my phone, and was wondering if anyone could pm me a download link to the (I'm not sure if its still forbidden) forbidden kernel, please?
Thank you
I don't have a link, but you could just Google it and be downloading right now. I just checked to make sure and Google still works.
i was looking for the rom a5ux_v12 for my samsung j5 2015 (j500f) for a long time. the links were there in xda-developers.com which have been deleted a few days ago. and also cannot find any download location.
so im lost . i want to find that rom.
i will be glad if anyone can give me working download link or else the file (if u have)
hoping for a quick answer.
Thank you Very much:good: