[Q] Updating - Out of Options - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Hello forums,
I've done a lot of searching but can't seem to find someone with my combo of problems. Awesome.
So here's my set up.
Samsung Galaxy Tab 10.1
CM9 2012 06 13 Nightly
Windows 7
I want to update to the stock ICS offered from Samsung. I originally had 3.2 HC and couldn't wait for the Canadian update to roll around so I went CM. But I've been stuck on CM9 Since. Now I have several problems that make it impossible for me to update. Any help would be much appreciated.
1. ODIN and PC will NOT detect the tablet when connected via USB. I get a USB not recognized. MTP is enabled. This means I cannot ODIN flash.
2. I can't find a Canadian ODIN Flashable-build. I'd have to use the US one. That has it's own slew of political problems.
3. CWM will not mount my SD card. I have a CWM Backup with ICS (Someone else uploaded it) saved in CWM's backup dir. but I cannot restore it since CWM 5.5.1.4 will not mount the SD.
I've literally been doing this on and off for about 2 months now and I could really use some help. Any suggestions would be greatly appreciated.
I could care less if the whole thing were wiped clean if it means I can start using the cameras again.
Thank you.

NitesWhisper said:
1. ODIN and PC will NOT detect the tablet when connected via USB. I get a USB not recognized. MTP is enabled. This means I cannot ODIN flash.
Click to expand...
Click to collapse
When you view the tablet in Device Manager, what does it say? What specific error do you get when you plug it in?
Some of the cheap cables are poorly constructed to the point where just normal flexing of the cable breaks the wires going to the connector. If you lose one of the USB transmit/receive wires, the cable will still allow you to charge, but the OS won't recognize the device.
If you know the cable's good, try reinstalling the drivers.

Related

[Q] How to flash stock ROM using ROM manager?

My computer wont recognize my phone at all, it just says 'USB device not recognized'. I have tried reinstalling drivers, using different USB cables, USB debugging mode, mass storage mode and mounting the SD card ALL of that.. so I know it's something wrong with the phone rather than my drivers or me being stupid. I have searched to try and find a fix for this but nothing is forthcoming.. I think it may be a faulty USB port on my phone.
Anyway, this means I can't use ODIN to flash my phone back to stock so what I want to do is flash my phone back to stock T959UVJI6 using a zip file and ROM manager if possible.. but I have looked everywhere and can't find a zip for stock ROM... Every method I've seen says to use ODIN which is impossible for me.
Any help on this or a link to where I can download a stock ROM zip would be appreciated.
ok I managed to flash Bionix Fusion 1.2 which is ok, seems to be running fine. I still can't connect to my computer though I guess I will have to get the USB port checked out.
Sounds like an issue on the PC side if it recognized the phone was connected. You sure you got the drivers... are you using the cable that came with the phone? Sounds crazy, but i had issues using my nexus one cable one time.
I tried with the cable that came with my phone and also my husband's micro usb cable.. I downloaded the drivers from the link given in the XDA forums, tried to restore drivers from KIES, downloaded drivers from other spots too.. none of them work. I also tried to connect to my husband's PC and it said 'USB device not recognized' as well. I noticed a couple of other posts where this has happened to people and there seems to be no software/using different cable solution.. I am guessing I'll just have to get the phone looked at as I'm not savvy enough to go about it myself! Thanks for the advice though
Here is the stock JK6
http://forum.xda-developers.com/showthread.php?t=857974
Thank you, I will flash this one when I get home

Bricked Samsung Vibrant - USB Issues

Hey guys just wanted to say thanks for all the help you provide on a daily basis, for all the people trying to unlock the potential in their phones. However with that being said I might have tried too hard and messed up my phones. I have a Samsung Vibrant SGH-T595 with 2.1 (update 1) updated officially by Samsung.
I rooted the phone, used clock work recovery mod and then downloaded and installed cyanogenmod 7.1 RC. However in the end I did not like so I tried to go back using my backed up copy created by clockwork mod. Doing this has now what you would call "soft bricked" my phone.
The phone is currently stuck on the Samsung boot screen when trying to power on the device. I am unable to put it into download mode via the three button setup, but I bought a USB jig and it sets it into download mode.
Everything seems great at this point but the Odin program is unable to recognize my phone. I have downloaded the official Samsung Kies, and 64 bit drivers as well for my windows 7 system but it is unable to detect my phone. I believe it maybe a defective USB issue with this phone but not sure since it can be charged through USB but I can't remember the last time I was able to connect it to the PC and transfer files via the USB cable.
My question is what else can I do other then sell it for scrap?
Try another USB cable and different ports. It will recognize it eventually.
As you have a windows 7 x64 bit version i guess Odin may need to be opened by giving Administrator permissions.
Try right clicking odin and click Run as administrator. I guess this should work.
Ran into this issue last night with my wife's Nook Color and moving some file and driver issues. Guess what? It was a bad cord. Actually used my Vibrant cord and it was instantly recognized. Yes sometimes it IS actually THAT simple.
I also suggest you go to the Dev section and download the AIO Toolbox (links are live again and don't forget the .Net files too). Uninstall the drivers you have installed and run to toolbox. It has all the correct drivers, pit/tar files and Odin. It is an invaluable tool.
Sidenote: Kies is notorious for hardbricking devices. You should stay away from it altogether.
Woodrube said:
Sidenote: Kies is notorious for hardbricking devices. You should stay away from it altogether.
Click to expand...
Click to collapse
Exactly. And that is how i tried updating my vibrant to froyo and ended up hard bricking it..
Yeah like someone in here said, download aio vibrant toolkit.. its a surefire way to know your drivers are good and right.. once youve ruled them out, try a diff usb port and cable (mentioned above as well). If nothing works, then you may begin to entertain the idea that your phone is in difficult position.
Probably not hardbricked tho, vibrants are very resilient; just keep trying.
Then ttheres jtag and unbrickable mod if youre absolutely sure lifes over
Sent from a cell tower to the XDA server to you.
Thanks guys I ended up recycling my phones cause nothing I did worked. I did try AIO toolbox got the drivers, tried different cables. My SG II is able to be recognized by odin 1.85 with no issues but not my vibrant. I believe it is an issue with the vibrant's usb port. I originally rooted it by doing the update.zip fix from its external sd card, did not use my usb cable at that time. My other vibrant is completely hard bricked since it wont power on with two different fully charged batteries. Anyway thanks again and next time I will research more before modding my phones.
Hey OP,
I did the same exact thing as you and soft bricked it in the same manner. Then when I tried to get Odin to recognize the phone it wouldn't with my Samsung cable. I thought I was out of luck but I went and bought a USB cable made my Belkin from Meijer and Odin recognized it! I looked at the Samsung cable and the Belkin cable and the black plastic inside the microUSB in the Belkin is thicker than the Samsung. I think that helps create a tighter contact between phone microUSB and the cable. I thought I was screwed like you and I fixed the issue with a new cable!! That simple
I used the Samsung Galaxy S II usb cable which looks like it has a very tight connection with the contacts like you said. Thanks anyway I will try that brand of cable, if I ever run into that issue.

[Q] USB Device not recognized

I am owner of the Galaxy S2. I updated yesterday to SuperNexus Jelly Bean ROM, didn't liked it. I restored my device to CM9 which i was using for a month without any problems. Then it started, computer couldn't recognize the phone anymore. Its like that SuperNexus broke something i don't know. I reformatted my Win 7 Ultimate x64 and installed fresh new CM10 - but after all my computer and S2 don't like each other - USB device not recognized. Chaos. I asked my friend to come over just to test with his S2 (he's on stock ICS 4.0.3 or 4.0.4), and when i plug his phone into my computer, everything works flawlessly. I tried mounting in recovery, i tried with and without usb debugging, Odin doesn't find phone neither, tried updating drivers - no luck... Dialing *#7284" just gives me "connection problem or invalid MMI code". Need help on this please!
You can check THIS thread. The one HERE , and also THIS thread.
I've read them all, tried every advice, but phone still isn't reacting to anything. So my problem is that phone couldn't connect to a computer, well it connects but it states "USB device not recognized", it charges but that's all. Everything started with Custom ROM SuperNexus. I've done these steps so far:
1. Reformatted my computer OS, which is Windows 7 Ultimate x64
2. Downloaded CM10 over my phone, get into recovery --> factory reset, wipe cache, wipe dalvik, format system, install ROM, wipe cache, wipe factory
3. I tried on my computer, tried on my old computer with Win XP x86
4. My friend's Galaxy S2 is working like a charm with MY cable on MY computer, which makes me believe that there is some defectiveness in my phone
5. I tried cleaning MicroUSB port with tooth pick, ear-cleaning pick (or how do you call it), needle with some paper wrapped around it, tried blowing in it
6. I tried with different USB ports, front ones, USB 3.0 - still no luck
7. I tried flashing Wanamlite and Neat ROM-s, still the same problem
I'm using Airdroid now, but i really need to know what's the problem! I have already ordered a new parts on E-Bay and I'm having high hopes about that solution. Im not able to post link to E-bay item, but search it under Item Number: 150904945773. Any other advice is really highly appreciable. Thank you
Try downloading the Rom over WiFi, or Hardline instead. Have you tried a different USB Cable ? Also I'm not able to check that Ebay # right now.
TEAM MiK
MikROMs Since 3/13/11
eBay item is this: New Samsung i9100 Galaxy SII S2 Charger Charge Port Flex Cable Replacement parts
OP, I'm hoping it works for you. You seem to be going in the right direction with your troubleshooting.
Well, i've downloaded this ROM (CM10) via WiFi, now i can do it over Airdroid too. But is there a way to flash Stock Original Samsung ICS in recovery? Or is it only available in Kies and Odin? I came across "Mobile Odin", do you guys have some experience with it, is it safe to use? How big are chances anyway that USB will work with stock ROM? Someone told me "your USB port on phone is OK, if it's charging it's not broken", so I'm thinking that it is not a hardware issue after all? And BTW i used several cables, and three different computers. My girlfriend have SGS3, i tried it like 2 hours ago with her cable on her computer with no luck (and of course her phone have no problems to connect to that computer using that cable). Thank you
I would try a Stock Rooted Rom, and see if that works correctly. If not try connecting the Device, and reboot the PC with the Device plugged in.
How to install stock ROM if i cannot get Kies or Odin to recognize phone? Via Mobile Odin?
kuleee said:
How to install stock ROM if i cannot get Kies or Odin to recognize phone? Via Mobile Odin?
Click to expand...
Click to collapse
Try USB solutions from My Android Solutions or Mobile Odin like http://forum.xda-developers.com/showpost.php?p=28302093&postcount=4789 ( procedure is same but written for Korean SGS 1
Guys let me tell you that I'm grateful to you, cause this Mobile Odin worked and my Stock Rooted ROM worked in connecting with PC. But not on first try when i got into a newly flashed Stock Rooted Firmware, i've let it to do his stuff, update what he needed to update blahblah. Then i tried to connect my cable - it didn't work. I cursed, i cursed so bad. Then i considered to give it another shot, rebooted the phone - and voila! Everything works, i tried 2-3 times and its working. Obviously SuperNexus started my problems, they couldn't be repaired by any other ROM i tried (i tried CM9, CM10, Wanamlite, old Wanamlite with MTP enabler, Neat ROM)... Then with Mobile Odin everything just worked. Dunno what really was the problem. Thank you all
Glad you got it sorted
TEAM MiK
MikROMs Since 3/13/11

[Q] Help Please! I am NOT a noob- tried many ways but stuck trying with a work around

Happy Holidays Everyone!!!
Phone:
Tmobile T959 aka Samsung Vibrant
It is on stock Froyo 2.2
It has the 3E recovery.
I tried on 2 computers but I can NOT connect via USB it gives me USB malfunction error. The phone does charge. I can put it into download mode vie the 3 finger trick. When you connect it does give you the option to click the green Android icon Connect to USB. So it is talking to the computer, the usb is not totally dead.
Problem:
I need to root this phone. I can not use 1 click or anything else because I think there is a problem with the USB port. I can get files onto the phone via wifi or using the external sd card.
I tried using the update.zip file BUT because I am on the 3E recovery it will say signature failed. I can not run the install.bat to get it back to 2E recovery. I can not use ODIN because the Windows will not detect the phone properly.
What workaround can I use to root this phone? How would I use terminal on the phone?
HOW WOULD YOU ROOT THE PHONE IF YOUR USB PORT WAS "broken"?
THANKS for helping!
As far as I'm aware, you can't root your phone without the USB port working as most (if not all) root methods send their commands and files through ADB. Your pretty much stuck, unless your phone is under warranty. In that case, just go to your carrier and see if they'll give you a replacement device.
TheAndroidGod said:
As far as I'm aware, you can't root your phone without the USB port working as most (if not all) root methods send their commands and files through ADB. Your pretty much stuck, unless your phone is under warranty. In that case, just go to your carrier and see if they'll give you a replacement device.
Click to expand...
Click to collapse
It's out of warranty
I think there may be a way to do it via terminal emulator on the phone.
If this is possible, can someone please post how to do it.
anyone with a work around?
damn!
Am I stuck or does anyone have a way for me to root this phone without the using the USB connection (USB does charge, It will know when you connect to the pc for USB storage BUT windows will say not recognized. I tried it on 4 other pc's same results. I think something is wrong with the OS of the phone. I think the previous owner tried to update with Kies and it messed up the phone. The phone does boot and works.
droiduzr2 said:
damn!
Am I stuck or does anyone have a way for me to root this phone without the using the USB connection (USB does charge, It will know when you connect to the pc for USB storage BUT windows will say not recognized. I tried it on 4 other pc's same results. I think something is wrong with the OS of the phone. I think the previous owner tried to update with Kies and it messed up the phone. The phone does boot and works.
Click to expand...
Click to collapse
Try to install phone drivers for the computer i had to do that for my phone.
maikzen said:
Try to install phone drivers for the computer i had to do that for my phone.
Click to expand...
Click to collapse
I did all of that.
I think something is wrong with the phone's OS that is effecting the usb port.
How do I root this phone WITHOUT the USB port?
There has to be a way!
Can you determinate VID&PID of phone?
I can get into the device with airdroid and see the system files.
Which files do I need (or which apps) and where do I copy them manually to get it rooted?
droiduzr2 said:
I can get into the device with airdroid and see the system files.
Which files do I need (or which apps) and where do I copy them manually to get it rooted?
Click to expand...
Click to collapse
Is there not a device forum where you might could get some better information? My thinking is, a lot of the people (or most of the people) who may know some workarounds can probably help, but they don't check this section very often or at all.
Even if there's not a section for that model, I'm thinking there's probably one quite similar. Also a lot of times, a big portion of the userbase of one phone, will migrate to the same model when they upgrade.
Just throwing out some ideas in case that's helpful. My only advice on the problem itself is that I would look further into the driver issue. I've helped several people with very similar issues that we finally were able to correct.
Have you tried to ADB the device just to pull the serial? With USB debugging enabled. Have you installed the SDK and tried the naked drivers? There's some things to pursue possibly so you can have more information for the person who helps you get things straightened out.

Phone not detected by windows 7 help!

Hi guys,
I'm new to this forum. I've got a Samsung i777 on android 2.3.6 kernel 2.6.35.7 build number gingerbread.uckk6
I've recently bought this phone off ebay
My phone does not get detected by windows 7 or Macbook. I've tried changing the USB flex cable with I9100 v2.3 but still no luck.
When I connect USB port it beeps and shows mtp-initialization/mtp-connected on the phone but it is not shown on windows. It says USB cannot recognise the device. I've got a s3 and ideos x3 both of them are detected.
I've installed kies 3 on my laptop.
I had to swtich off the wifi on the phone because it consumes a lot of battery, I think it is because of the android version I'm using!
I want to root the phone and unlock it!!
Any help is appreciated!
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I'm guessing the problem is the Samsung drivers you have installed for the s3. Try uninstalling those and installing the correct drivers for s2.
Sent from my GT-p511x
you can check this thread for driver
http://forum.xda-developers.com/showthread.php?t=961956
You most likely need a new cable. Happened to me once! Could be the drivers but I HIGHLY recommend just trying a new USB cable.
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
kshah1606 said:
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
Click to expand...
Click to collapse
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
You could also download an app that allows you to enter download mode.
SighIsAnonymous said:
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
Click to expand...
Click to collapse
How would I be able to change the ROM if the phone is not detected
jpasher said:
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
Click to expand...
Click to collapse
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Yes I guess this rom is useless, if the wifi is switched on then battery would not even last 6 hrs!
kshah1606 said:
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Click to expand...
Click to collapse
Are you saying to get a balloon notification in the tray that says the USB device is not recognized? A possible reason for that is a faulty USB cable or USB port (funny enough, I actually got that message last night when I was playing around with my Captivate, and switching USB ports made it work). I know you said you've tried other computers an another USB cable, but that's about my only idea. Maybe there's some debris inside the connector that's messing up the connection.
When you say you changed the "USB flex cable", are you talking about the internal connector and board inside the phone? If so, perhaps the I777 connector board is actually a little different than the I9100 board and causing a compatibility issue.
The bug in UCKK6 related to wifi didn't affect everybody, but it definitely affected a lot of people (based upon reports here).
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
If you have an SD card, you can download another ROM on that SD card from your computer and then you can install custom recovery (CWM) and then install the ROM from SD card.
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
First ill run you through the problem I had. Just for reference did you use Mr. Cooks script before flashing Cyanogenmod 11? One of his scripts for cleaning before flashing, actually deletes a certain file, not to keen on which one. What it results in though is not being able to flash OF ROMS and some certain custom ROMS! So id recommend alliance's ROM! As for the "Getting the ROM on your device, you could put the ROM on your SD though recovery "Mount and storage/Mount mass storage/" or just use a micro sd card adapter and move it on there that way.
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Your help is appreciated
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
kshah1606 said:
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Click to expand...
Click to collapse
What state is your phone currently in? Is it still not detected by the computer? You are still on 2.3.6, correct?
If it's still not being detected by your computer, I'm not sure if you can flash anything needed using the stock recovery. I know that when I flashed stock JB, I was able to boot into stock recovery and directly apply the standard CWM update file here. It will give boot into a temporary CWM that should allow you to flash other ZIP files (like a ROM), although I had trouble doing that (so I ended up flashing the AJK_v4.9_NoSwap.zip kernel using the MobileOdin android app, which gave a permanent CWM recovery).
I'm not sure if this same process works with the 2.3.6 recovery. However, in order to get the stock recovery to see the internal SD card, I had to run adb shell commands to mount the partition (meaning I had to have a working connection from the computer).
Solved!!!
HI Guys,
Many many thanks for all your responses!
I have changed the USB flex cable again to an older version v2.2 and my phone is currently being detected by kies! So relieved thanks a lot for all your help..now the rooting begins!!:laugh:

Categories

Resources