I flashed SuperNexus 2.0 and Siyah kernel on my phone. And after flashing the kernel there are several errors, some processes doesn't work anymore and mobile working very slow Like in slow motion
Does anybody have the same problems?
DiaBolicalThinker said:
I flashed SuperNexus 2.0 and Siyah kernel on my phone. And after flashing the kernel there are several errors, some processes doesn't work anymore and mobile working very slow Like in slow motion
Does anybody have the same problems?
Click to expand...
Click to collapse
which siyah version u flashed is it v6.0b4, alternatively try flashing Dorimanx v7.43 and see
this Siyah-s2-v6.0b4 if you dont mind can you give me a Download link
DiaBolicalThinker said:
this Siyah-s2-v6.0b4 if you dont mind can you give me a Download link
Click to expand...
Click to collapse
dwnld link for what Siyah v6.0b4 or dorimanx ver 7.43
since siyah v6.0b4 doesnt support 4.2.1 based roms properly for now
Sun90 said:
dwnld link for what Siyah v6.0b4 or dorimanx ver 7.43
since siyah v6.0b4 doesnt support 4.2.1 based roms properly for now
Click to expand...
Click to collapse
dorimanx ver 7.43 Download link and i just need to root this kernel and with f rest check ?
DiaBolicalThinker said:
dorimanx ver 7.43 Download link and i just need to root this kernel and with f rest check ?
Click to expand...
Click to collapse
there is no need to root the kernel ma8
just dwnld the Zip file from the link below and flash the same from Recovery, the same way u flashed the supernexus rom
after flasing the kernel just reboot ur phone
http://www.dorimanx.com/Android-ICS/
Sun90 said:
there is no need to root the kernel ma8
just dwnld the Zip file from the link below and flash the same from Recovery, the same way u flashed the supernexus rom
http://www.dorimanx.com/Android-ICS/
Click to expand...
Click to collapse
Dude unable to go in recovery because getting again and again System stop error
Done evey thing
Related
Hi guys can anyone tell me why can't I flash a new kernel on my I9100XXLPH (baseband version) pls see attachment for current kernel and rom.
I use CMW to flash the Dorimanx 1.7 update but it says Kernel flash failed! No zImage was found
I followed Cf root instructions and was successful
I also restored this backup from CWM recovery
Thanks!
racoony said:
Hi guys can anyone tell me why can't I flash a new kernel on my I9100XXLPH (baseband version) pls see attachment for current kernel and rom.
I use CMW to flash the Dorimanx 1.7 update but it says Kernel flash failed! No zImage was found
I followed Cf root instructions and was successful
I also restored this backup from CWM recovery
Thanks!
Click to expand...
Click to collapse
try flashing the siyah kernel v3.4.1 instead of dorimanx and see,also baseband is nothing to do with ur kernel flashing for sure
Sun90 said:
try flashing the siyah kernel v3.4.1 instead of dorimanx and see,also baseband is nothing to do with ur kernel flashing for sure
Click to expand...
Click to collapse
CMW gave the same message no zImage found
what can I try more?
racoony said:
CMW gave the same message no zImage found
what can I try more?
Click to expand...
Click to collapse
btw I tried siyah v3.4.1 and dorimanx v5.3
racoony said:
btw I tried siyah v3.4.1 and dorimanx v5.3
Click to expand...
Click to collapse
try flashing a kernel cleaning script first and then flash the kernel and see.
also ensure the kernel zip file u dwnld'd is not corrupt or broken one
Thank you!
Sun90 said:
try flashing a kernel cleaning script first and then flash the kernel and see.
also ensure the kernel zip file u dwnld'd is not corrupt or broken one
Click to expand...
Click to collapse
Hi Sun90
Thank you! kernel cleaning script worked and now I am on siyah 3.4.1 and possibly on way to playing with other kernels and roms again... Awesome work thanks!
racoony said:
Hi Sun90
Thank you! kernel cleaning script worked and now I am on siyah 3.4.1 and possibly on way to playing with other kernels and roms again... Awesome work thanks!
Click to expand...
Click to collapse
glad i was of some help ma8
what script did u use to wipe the kernel
Sun90 said:
glad i was of some help ma8
Click to expand...
Click to collapse
Sun "we are not worthy"
Sent from my GT-I9100 using xda premium
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flush my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flushing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Donnie Sins said:
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Click to expand...
Click to collapse
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
appumohanty said:
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Click to expand...
Click to collapse
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
boki9999 said:
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
Click to expand...
Click to collapse
^^
But it should be possible through CWM...
Sent from the Matrix
Donnie Sins said:
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not flashing,
^^
But it should be possible through CWM...
Sent from the Matrix
Click to expand...
Click to collapse
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
appumohanty said:
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
Click to expand...
Click to collapse
have you tried flashing in download mode with odin?
boki9999 said:
have you tried flashing in download mode with odin?
Click to expand...
Click to collapse
no i will try it now and will let you know
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
appumohanty said:
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
Click to expand...
Click to collapse
Did you flash Siyah 5.0i?
boki9999 said:
Did you flash Siyah 5.0i?
Click to expand...
Click to collapse
i flash with latest 5.0.1, but i am getting black screen after after kernel booting,
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
alister91 said:
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
1. Siyah Kernal Odin version : Flash via Odin ( http://d-h.st/Bcf )
2. Enter into Siyah recovery and flash a compatibale ROM.
Done.
If you havent got a rom on your micro SD card
a) In siyah kernal mount USB storage.
b) Use an micro-sd reader to copy flashable zip
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately even dorimanx works .... you have to wait
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
http://db.tt/YceTd0pl flash a kernel cleaning script before you flash a new kernel
---------- Post added at 02:29 PM ---------- Previous post was at 02:25 PM ----------
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Siyah,Dorimanx kernel does not have a support yet in jb leaked xxlsj, but for sure they are working with it now..
Thanks A Lot
appumohanty said:
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
Click to expand...
Click to collapse
Thanks a lot man....had been searching around a lot for this...didnt wanna use odin... so was looking for a compatible siyah kernel...your post helped a lot....many thanks...
this is the changelog but it didnt say there that it supported jb leak 4.1.2... can i use this?
http://forum.xda-developers.com/showpost.php?p=34407376&postcount=16109
kentandrei said:
this is the changelog but it didnt say there that it supported jb leak 4.1.2... can i use this?
http://forum.xda-developers.com/showpost.php?p=34407376&postcount=16109
Click to expand...
Click to collapse
No, dont try it will not boot ur phone with that JB leak ROM on it for sure
instead u can try 'Phill' kernel
Sun90 said:
No, dont try it will not boot ur phone with that JB leak ROM on it for sure
instead u can try 'Phill' kernel
Click to expand...
Click to collapse
:good: thanks Sun90 for quick rply i'll just wait for kernel that support jbleak4.1.2 then.. thanks anywys.
kentandrei said:
:good: thanks Sun90 for quick rply i'll just wait for kernel that support jbleak4.1.2 then.. thanks anywys.
Click to expand...
Click to collapse
Ur welcome ma8, for now only 'Phil' kernel does support the new JB leak rom
sorry, link below for that kernel
http://forum.xda-developers.com/showthread.php?t=1877270
Does Philz kernel supports dual booting
Sent from my GT-I9100 using xda premium
jottermine said:
Does Philz kernel supports dual booting
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
No..its just stock kernel repacked with no emmc bug..
and please mate do some search before posting a qstn
Sun90 said:
Ur welcome ma8, for now only 'Phil' kernel does support the new JB leak rom
sorry, link below for that kernel
http://forum.xda-developers.com/showthread.php?t=1877270
Click to expand...
Click to collapse
sir sun90 i have a question.. i install galaxys2root.com rom leak jb by zedomax using odin directly and i want to change it by this one WanamLite Jelly Bean LSJ V13 and i dont have cmw and philz kernel.. do i have to install philz kernel so that i will have cmw? and if flash WanamLite Jelly Bean LSJ V13 rom does it still get the yellow triangle on boot? :silly:
Address me as sir and i'll answer.
postfatal said:
Address me as sir and i'll answer.
Click to expand...
Click to collapse
sir postfatal i have a question.. i install galaxys2root.com rom leak jb by zedomax using odin directly and i want to change it by this one WanamLite Jelly Bean LSJ V13 and i dont have cmw and philz kernel.. do i have to install philz kernel so that i will have cmw? and if flash WanamLite Jelly Bean LSJ V13 rom does it still get the yellow triangle on boot? :laugh:
kentandrei said:
sir postfatal i have a question.. i install galaxys2root.com rom leak jb by zedomax using odin directly and i want to change it by this one WanamLite Jelly Bean LSJ V13 and i dont have cmw and philz kernel.. do i have to install philz kernel so that i will have cmw? and if flash WanamLite Jelly Bean LSJ V13 rom does it still get the yellow triangle on boot? :laugh:
Click to expand...
Click to collapse
You don't have to call me sir to answer your question
Install PhilZ kernel, link HERE from stock recovery (you will not get yellow triangle) and then from CWM recovery of new kernel (reboot recovery first) you will be able to flash WanamLite v13.
Regards
Many40 said:
You don't have to call me sir to answer your question
Install PhilZ kernel, link HERE from stock recovery (you will not get yellow triangle) and then from CWM recovery of new kernel (reboot recovery first) you will be able to flash WanamLite v13.
Regards
Click to expand...
Click to collapse
thanks ma8 btw can i change the cmw version in philz cwm when creating a backup what should i do? and in backup can i use .tar instead of .dup?
kentandrei said:
thanks ma8 btw can i change the cmw version in philz cwm when creating a backup what should i do? and in backup can i use .tar instead of .dup?
Click to expand...
Click to collapse
Yes, in backup and restore section you have an option backup format. So change default format to tar and all of your backups will be created in tar version. For restoring you can you both formats.
Sent from my GT-I9100 using xda premium
thanks mate appreciate the quick help and no need to call you sir haha..
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
saikat_ace said:
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
Click to expand...
Click to collapse
if you cannot install any rom i guess you can try to install an odin version . this should not give you any problem
Genrrally, there are 2 methods to flash ROM/kernel/modem: (1) using CWM recovery if you got hold of zip file; (2) use ODIN (PC needed) or Mobile ODIN app (PC-less flashing) if you have tar file. (Mobile ODIN can also flash zip file.)
Which method did you use to flash?
Sent from my GT-I9100 using Tapatalk 2
saikat_ace said:
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
Click to expand...
Click to collapse
First upgrade the 'Philz' kernel to the latest v3.99 and then u can install any Custom Rom/Kernel of ur choice from its recovery
saikat_ace said:
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
Click to expand...
Click to collapse
you can flash dorimanx kernel >Advance>reboot recovery..then you can install any rom you want to
I recently heard about PAC MAN ROM 4.2.2 for Galaxy GT I9100 which is hybrid of different ROMs like Paranoid, CynogenMod etc. I wanted to know how much stable is this ROM in terms of performance and battery life. Additionally, is custom kernel and CWM required to install this ROM or simply flashing the new ROM will do the job? I really am looking forward to installing this ROM in my phone
I have rooted S2 GT I 9100 with official 4.1.2, stock recovery and stock kernel.
Sent from my GT-I9100 using xda app-developers app
ssanjy said:
I wanted to know how much stable is this ROM in terms of performance and battery life.
Click to expand...
Click to collapse
That depends on each user mate. I suggest you read user opinions in the ROM's thread to find out.
ssanjy said:
Additionally, is custom kernel and CWM required to install this ROM or simply flashing the new ROM will do the job? I really am looking forward to installing this ROM in my phone
Click to expand...
Click to collapse
Like all custom ROMs, PACman ROM requires CWM and root. You don't need a custom kernel per se, but flashing a custom kernel is the best way to get root as well as CWM.
immortalneo said:
That depends on each user mate. I suggest you read user opinions in the ROM's thread to find out.
Like all custom ROMs, PACman ROM requires CWM and root. You don't need a custom kernel per se, but flashing a custom kernel is the best way to get root as well as CWM.
Click to expand...
Click to collapse
Can you please suggest me a stable custom Kernel that would be comparatively safe for my device GT I9100. I would be quite glad if you would help me with it...:good:
In discussing about the kernel in this thread in post# 619 pg 62 Viper has suggested me with Philz Kernel and FAQs of PacMan ROM, they suggest Dorimax Kernel for my device. So, are these kernel better in performance than the stock kernel or not and does performance of ROM depend upon kernel as well? Since I can backup my ROM and flash new ROM with temporary CWM, I am thinking of using it instead of other custom kernel so as not to mess up with my stock kernel.
ssanjy said:
Can you please suggest me a stable custom Kernel that would be comparatively safe for my device GT I9100. I would be quite glad if you would help me with it...:good:
In discussing about the kernel in this thread in post# 619 pg 62 Viper has suggested me with Philz Kernel and FAQs of PacMan ROM, they suggest Dorimax Kernel for my device. So, are these kernel better in performance than the stock kernel or not and does performance of ROM depend upon kernel as well? Since I can backup my ROM and flash new ROM with temporary CWM, I am thinking of using it instead of other custom kernel so as not to mess up with my stock kernel.
Click to expand...
Click to collapse
Actually all custom kernels are safe. Just make sure (by reading the instructions) you flash the compatible one.
Philz-kernel for example cannot be used with PAC. Just try the stock kernel. If you don't like it, you can try (for example) Dorimanx kernel.
Donnie Sins said:
Actually all custom kernels are safe. Just make sure (by reading the instructions) you flash the compatible one.
Philz-kernel for example cannot be used with PAC. Just try the stock kernel. If you don't like it, you can try (for example) Dorimanx kernel.
Click to expand...
Click to collapse
So if I want to try different ROMs can Dorimanx do the job for me? And since my device is already rooted do I need to unroot first before flashing new kernel which have rooting functionality?
Sent from my GT-I9100 using xda app-developers app
ssanjy said:
So if I want to try different ROMs can Dorimanx do the job for me? And since my device is already rooted do I need to unroot first before flashing new kernel which have rooting functionality?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
No you don't need to un-root and like her said.......read the instructions and search forums for specific kernals for specific ROMs. I'm not sure but I don't think dorimanx is compatible with ALL ROMs.
Anyone clarify?
Sent from my GT-I9100 using xda app-developers app
Flashing Kernels
cowen2006 said:
No you don't need to un-root and like her said.......read the instructions and search forums for specific kernals for specific ROMs. I'm not sure but I don't think dorimanx is compatible with ALL ROMs.
Anyone clarify?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
So just like flashing ROMs we can flash different kernels as per our need simply by installing the respective compatible kernels right?
ssanjy said:
So just like flashing ROMs we can flash different kernels as per our need simply by installing the respective compatible kernels right?
Click to expand...
Click to collapse
True:thumbup:
Restoring to stock
After flashing PACMan version of 4.2.2, if I need to for warranty, can I simply go to CWM recovery and restore previously created backup of my stock ROM?
ssanjy said:
After flashing PACMan version of 4.2.2, if I need to for warranty, can I simply go to CWM recovery and restore previously created backup of my stock ROM?
Click to expand...
Click to collapse
No, you need to do a back up to your pc first using kies preferably.....this will make sure its put back to stock standard for warranty purposes.
I thought s2/i9100's were too old to be warrant'd now?
Error in /emmc/...while flashing Pac Man 4.2
I tried to flash PacMan 4.2 but encountered problem. Posted my issue in this thread but no solution received yet.
Got error message something like
"assert failed get prop ("ro.product.device") == "galaxys2" ||getprop("ro.buil.product")==galaxys2.....Error in /emmc/[file location]....Installation aborted..."
Tried to flash pac_i9100_4.2-milestone.1.release_20130806-205645.zip (MD5sum: 5e569d28ae20c0dbb45c71a212a35ce4)
I searched the forum but some say its problem with CWM recovery and others tell about corrupted file. I downloaded file twice incl previous release of the ROM. I even explored the zipped file and could navigate to most of the folders which I think that suggests that file is fine (no corrupted download).
I used temporary CWM v. 6.0.1.4. Should I try Dorimanx Kernel as the developer of ROM suggests the kernel for the ROM.
I currently have official JB 4.1.2, stock recovery and kernel. GT I9100.
ssanjy said:
I tried to flash PacMan 4.2 but encountered problem. Posted my issue in this thread but no solution received yet.
Got error message something like
"assert failed get prop ("ro.product.device") == "galaxys2" ||getprop("ro.buil.product")==galaxys2.....Error in /emmc/[file location]....Installation aborted..."
Tried to flash pac_i9100_4.2-milestone.1.release_20130806-205645.zip (MD5sum: 5e569d28ae20c0dbb45c71a212a35ce4)
I searched the forum but some say its problem with CWM recovery and others tell about corrupted file. I downloaded file twice incl previous release of the ROM. I even explored the zipped file and could navigate to most of the folders which I think that suggests that file is fine (no corrupted download).
I used temporary CWM v. 6.0.1.4. Should I try Dorimanx Kernel as the developer of ROM suggests the kernel for the ROM.
I currently have official JB 4.1.2, stock recovery and kernel. GT I9100.
Click to expand...
Click to collapse
Use 'Philz' Kernel (tar file for ODIN Flash) to root ur phone and then use its recovery to install any custom rom of ur choice
Sun90 said:
Use 'Philz' Kernel (tar file for ODIN Flash) to root ur phone and then use its recovery to install any custom rom of ur choice
Click to expand...
Click to collapse
I have rooted my device by flashing zip file. And according to Donnie Sins in post#4 in this thread suggested that Philz-kernel cannot be used with PAC. Now I am more confused....:laugh::laugh::good:
ssanjy said:
I have rooted my device by flashing zip file. And according to Donnie Sins in post#4 in this thread suggested that Philz-kernel cannot be used with PAC. Now I am more confused....:laugh::laugh::good:
Click to expand...
Click to collapse
Lol, i said to install 'Philz' kernel so that u can use its recovery to flash PAC after that the 'Philz' kernel will be replaced by the one that comes with the PAC rom for u
PS- alternatively u can flash 'Dorimanx' kernel and use its recovery to flassh PAC rom
Sun90 said:
Lol, i said to install 'Philz' kernel so that u can use its recovery to flash PAC after that the 'Philz' kernel will be replaced by the one that comes with the PAC rom for u
PS- alternatively u can flash 'Dorimanx' kernel and use its recovery to flassh PAC rom
Click to expand...
Click to collapse
I should try Dorimanx then.....Should I use the one for JB/ICS Stock v 8.38 in this link for my device.
ssanjy said:
I should try Dorimanx then.....Should I use the one for JB/ICS Stock v 8.38 in this link for my device.
Click to expand...
Click to collapse
Yes
Sun90 said:
Yes
Click to expand...
Click to collapse
I still am getting "assert failed............(Status 7)
ssanjy said:
I still am getting "assert failed............(Status 7)
Click to expand...
Click to collapse
have u flashed the Dori v8.34 (tar File for ODIN) thro ODIN, if not try the same and see
Sun90 said:
have u flashed the Dori v8.38 (tar File for ODIN) thro ODIN, if not try the same and see
Click to expand...
Click to collapse
I tried to flash it through stock recovery and it said signature verification failed...when I tried it with temporary CWM version it displayed "assert....error!!!"
ssanjy said:
I tried to flash it through stock recovery and it said signature verification failed...when I tried it with temporary CWM version it displayed "assert....error!!!"
Click to expand...
Click to collapse
u cannot flash dori kernel from Stock recovery ma8 , instead Dwnld the V8.34 (.tar extension file ) from dori site and flash the same using 'ODIN' on PC. then reboot ur phone into dori kernel recovery and from there u do all the necessary wipes and install 'PAC' rom as per its install instruction's