I have a 16GB YP-G70EW Samsung Player 5.0 with physical center button. I'm trying to recover it to stock or any binary.
I've tried many binaries here, but none work, can't seem to get past the samsung screen. Download mode always works, but recovery almost never. Can someone help me with finding the correct pit and binary? Thanks!
http://forum.xda-developers.com/showthread.php?t=1389873
The pits.
http://files.ucloud.com/pf/D618988_6274534_60530
this is the recovery rom for G70
I'm not sure who made this. It may be sir Rumirand.
contains:
boot.bin
cache.rfs
dbdata.rfs
factoryfs.rfs
param.lfs
Sbl.lfs
zImage
"vpro" from Korean SGP forum, helped uploading this file.
unfortunately this site has download limit so after several hundred downloads, it will be unavaliable.
oh yea, it's always good to flash pit file that Mr. Kryptonite metions. Just get the right one......
TheKryptonite said:
http://forum.xda-developers.com/showthread.php?t=1389873
The pits.
Click to expand...
Click to collapse
The problem is that the 16gig pit posted is for the GB70 model, not the G70 model, I already tried that and didn't help.
xtwister161 said:
The problem is that the 16gig pit posted is for the GB70 model, not the G70 model, I already tried that and didn't help.
Click to expand...
Click to collapse
They are the same and should work both the same.
You have other kind of problem. Wipe clean and flash stock FW and wipe cache again.
I can't download your 'full recovery rom for yp-g70' linked
I really need the files. Please give me full recovery rom for yp-g70_16g.
Indeed my device is brick(infinite download mode:crying.
Because of covering kernel, formmating efs//system//emmc//sdcard//data etc., and intalling custom rom.
Thenthforth when I turn on my device start infinite samsung logo.
So i covered pure firmware using odin but that the time start infinite galaxy space logo:crying:.
Finally I cover 'full recovery for yp-g1' using heimdall. I Perfectly ruin my device. What should I do? Do i use 'adb sideload'?
Please help me:crying:
Try to wipe cache with the standard recovery mode if you can
Enviat des del meu YP-G70 utilitzant Tapatalk 4 Beta
Related
Hello everyone. I bricked my US Galaxy Player 4.0 after trying to install a certain ROM for it.
i visited this page:
http://forum.xda-developers.com/showthread.php?t=1531850
for the stock rom and tried to flash the PIT file along with a ROM's PDA file. All i keep getting when i try to reboot it is the Samsung logo followed by the image i'm going to attach to this.
I can get into download mode and everything, i think it's just a matter of having the right files to flash, etc. Can anyone help me out?
ziggs4lyfe said:
Hello everyone. I bricked my US Galaxy Player 4.0 after trying to install a certain ROM for it.
i visited this page:
http://forum.xda-developers.com/showthread.php?t=1531850
for the stock rom and tried to flash the PIT file along with a ROM's PDA file. All i keep getting when i try to reboot it is the Samsung logo followed by the image i'm going to attach to this.
I can get into download mode and everything, i think it's just a matter of having the right files to flash, etc. Can anyone help me out?
Click to expand...
Click to collapse
follow the proper instructions in that link with the proper files for the US version, when using those files to recover you use Heimdall not ODIN, also make you have a good backup of your EFS.tar or you'll be like me after screwing around with the CM7 beta's and not have a lockscreen or powermenu.
Simple flashing the PIT and the "stock" .tar via Odin will NOT work, I assume your trying to use Odin because you say "with a ROM's PDA file" and there is no PDA box if you are doing what that link says to do for the US version.
That's exactly how I bricked my Galaxy Player 4. Except that I can't enter recovery or download mode. I have to enter download mode with Adam's Resurrector. I used Heimdall with those files and I keep getting error: failed to receive response. So I have no way to revive my player.
ziggs4lyfe said:
Hello everyone. I bricked my US Galaxy Player 4.0 after trying to install a certain ROM for it.
i visited this page:
http://forum.xda-developers.com/showthread.php?t=1531850
for the stock rom and tried to flash the PIT file along with a ROM's PDA file. All i keep getting when i try to reboot it is the Samsung logo followed by the image i'm going to attach to this.
I can get into download mode and everything, i think it's just a matter of having the right files to flash, etc. Can anyone help me out?
Click to expand...
Click to collapse
Did you wipe your data?
Sent from my GT-I9000 using xda premium
zaclimon said:
Did you wipe your data?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
yea, he should do it at first after flashing right kernel and rom, factory reset, format cache, clean dalvik and fix permissions, if not through CWM, just manualy (adb console)
Mine is hard bricked, but I can still get into download mode with the resurrector. But when I try to flash the correct rom and kernel, I get the following error in Heimdall: "kernel upload failed", anyone how to fix this?
Thats just soft bricking ur fine go back to stock start over find the stock tar files
Sent from my SAMSUNG-SGH-I997 using XDA
Sorry to confuse you, mine is most definitely hard bricked.
I used Odin 1.85 to revert to stock ROM. My phone is i9100XXLPX so I downloaded the right ROM for it from androidfirmwares.net. There were two 4.0.3 ROMs for XXLPX, and I tried flashing them both. Both got stuck on Samsung logo.
This phone is barely new and a gift I am very upset, and your help will mean the WORLD to me. I am willing to co-operate the best I can. But please, I need anyone's help! You will be given all the 'thanks' you'd like.
THANKS a lot in advance!
During the Odin Flash you got the green signal from Odin?
Also before flashing did you wipe to factory settings?
Sent from my GT-I9100 using xda app-developers app
THE PROBLEM HAS BEEN FIXED.
How I fixed it:
In recovery, I wiped data (after flashing the ROM) and it booted normally.
Thank you!
I am sorry for the hassle.
Sadly, I'm having the same issue.
I'm coming from CyanogenMod 10.1 and wanted to test the latest stock firmware from Samsung.
My PC is running under Linux and the way I flash the firmware is:
sudo heimdall flash --primary-boot boot.bin --cache cache.img --factoryfs factoryfs.img --hidden hidden.img --modem modem.bin --param param.lfs --secondary-boot Sbl.bin --kernel zImage
The image files are extracted from the I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5
Unfortunately after the flash and reboot the booting is stuck at SAMSUNG logo and no wiping or re-flashing helps. Any ideas what I'm doing wrong?
julandroid said:
Sadly, I'm having the same issue.
I'm coming from CyanogenMod 10.1 and wanted to test the latest stock firmware from Samsung.
My PC is running under Linux and the way I flash the firmware is:
sudo heimdall flash --primary-boot boot.bin --cache cache.img --factoryfs factoryfs.img --hidden hidden.img --modem modem.bin --param param.lfs --secondary-boot Sbl.bin --kernel zImage
The image files are extracted from the I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5
Unfortunately after the flash and reboot the booting is stuck at SAMSUNG logo and no wiping or re-flashing helps. Any ideas what I'm doing wrong?
Click to expand...
Click to collapse
Try windoze.
Here's the leak, it could get you to your feet before flashing LS8.
At the end I gave up, after the failure to install even the older ICS 4.0.4 official firmware, so no love for me from the Samsung.
Happily, at least I was able to reinstall CM10.1 without issues. The thing that impressed me, after reinstalling the CM10.1, was that my internal card was almost the same as is before the fiasco. I.e. the old folders with the images (from the camera) and the uploaded music was intact!
It seems I have to format the internal sd card before I start flashing the Samsung's firmware.
1gnition said:
I used Odin 1.85 to revert to stock ROM. My phone is i9100XXLPX so I downloaded the right ROM for it from androidfirmwares.net. There were two 4.0.3 ROMs for XXLPX, and I tried flashing them both. Both got stuck on Samsung logo.
This phone is barely new and a gift I am very upset, and your help will mean the WORLD to me. I am willing to co-operate the best I can. But please, I need anyone's help! You will be given all the 'thanks' you'd like.
THANKS a lot in advance!
Click to expand...
Click to collapse
i had the same issue, i flashed recovery-twrp from odin, wiped cache and factory reset. booted up fine
my samsung a105f a10 stucked at samsung logo after i flashed with odin
i did wipe data and nothing fix it. i also tried different firmware with pit file selected but nothing work
please someone help me
1gnition said:
I used Odin 1.85 to revert to stock ROM. My phone is i9100XXLPX so I downloaded the right ROM for it from androidfirmwares.net. There were two 4.0.3 ROMs for XXLPX, and I tried flashing them both. Both got stuck on Samsung logo.
This phone is barely new and a gift I am very upset, and your help will mean the WORLD to me. I am willing to co-operate the best I can. But please, I need anyone's help! You will be given all the 'thanks' you'd like.
THANKS a lot in advance!
Click to expand...
Click to collapse
Restock is impossible if you updated to android 10 due to antirollback. If you cannot go into download mode or download mode just keeps fails when flashing, your emmc is dead.
Happened to me today..
Flashed my Galaxy A51 to the latest firmware using ODIN after I tried a custom ROM on this phone, and it stuck on Logo even after getting pass in ODIN.
The solution is to go back to recovery (stock recovery, not TWRP, no need reflashing firmware etc), wipe cache, data and format.. then reboot.
Hello,
I've managed to soft brick my Samsung Galaxy 4.0 [YP-G1 USA], and after looking through several threads I have determined that I have managed to butcher my partitions on my device.
I have already attempted to flash Stock roms onto the device using ODIN (I have used the ODIN ROM from here: http://forum.xda-developers.com/showthread.php?t=1531850) alongside the PIT file. However, after looking into the .TAR files, I have found that they do not contain the whole rom in order to fully re-partition my device - usually there is only a zImage and maybe a factoryfs.rfs file inside.
I can still access download mode, and when the device attempts to boot up normally, the Android Recovery Service appears. When I attempt to wipe data, formatting of both "dbdata/" and "cache/" fails, and upon reboot I am returned to the Android Recovery Service again.
I am wanting to try re-partitioning by using Heimdall 1.3.1, in hopes that this might fix my ARS boot loop issue. However, the Heimdall ROM in the above link is unavailable at this time, something to do with MediaFire download limits on corrupted/encrypted archives or something similar.
After several highly-unsuccessful searches here on XDA, I can't seem to find a stock ROM that has all the partition files within. Does anyone know where I can find a complete download of the USA YP-G1 Stock ROM that I can use with Heimdall to manually repartition my YP-G1?
I will be using the instructions provided in the above link for Heimdall flashing.
Many thanks,
Anorax|Audio
http://forum.xda-developers.com/showthread.php?t=1720457 scroll to bottom and Thank zaclimon
obscuresword said:
http://forum.xda-developers.com/showthread.php?t=1720457 scroll to bottom and Thank zaclimon
Click to expand...
Click to collapse
already found this thread, and the only usable recovery ROMs there were dead or incomplete...
However, I PM'd zaclimon about his mediafire link to the Heimdall SGP 4.0 ROM and he sent me an updated link.
Thanks though for trying
Hi there,
I may have softbricked my i9300 S3 after failing to flash MIUI. I had the phone rooted already with custom recovery installed.
CWM 6.0.1.2. A friend recommended the recovery after he successfully installed it on his S3. I was running Android 4.1.2
so no Knox problems hopefully. I downloaded the latest MIUI rom for my phone directly from the official website and used the CWM
to try and flash it. My phone was already rooted at that stage and I had wiped cache and reset the phone prior to the flash attempt.
Unfortunately it gave me a Status 7 error. Even after I unrooted and rerooted my phone the error still remained. I read somewhere else
that this happens sometimes and so I edited the Updater-Script as suggested elsewhere and deleted the section pertaining to the
Verification process. I double checked I had the right ROM too and proceeded to wipe and flash again. It seemed to take and the phone
restarted and I was met with the MIUI language selection menu. However, when i tried to select English, the whole thing just froze and switched
off and restarted itself. But this time the screen went all weird and fuzzy and wouldnt boot back to MIUI interface. I tried to boot into recovery but with no luck. I have tried to reflash the recovery also with no luck. I have tried other versions of CWM alos without luck. Tried TWRP and also no luck. I have used both the 3.07 and the 1.85 version of ODIN with no luck. The flash would fail with either a PIT error or a COM port error. But I have all the necessary drivers installed. I have Kies but dont run it at the same time. The Emergency Firmware something also doesnt seem to work.
I have pictures of the various errors and such and can provide dropbox links if required
Any suggestions would be helpful.
Thanks!
Original Firmware
If I were you, I would go to Download Mode and Flash the Original Firmware from Samsung. Download it from the Sammobile Website and after you successfully installed it try it again.
Like Tkkg1994 said above download the Samsung firmware and use Odin to install it through download mode.
You were having a "Status 7" error when initially flashing miui because your CWM recovery was not the latest...download the latest cwm recovery (6.48.something not sure??) Then flash miui and hopefully you shouldn't have any problems.
Sent from a "Galaxy" far, far away with my Ultra Ray Gun
begin from bottom
Pulseuser said:
Like Tkkg1994 said above download the Samsung firmware and use Odin to install it through download mode.
You were having a "Status 7" error when initially flashing miui because your CWM recovery was not the latest...download the latest cwm recovery (6.48.something not sure??) Then flash miui and hopefully you shouldn't have any problems.
Sent from a "Galaxy" far, far away with my Ultra Ray Gun
Click to expand...
Click to collapse
Yes that's correct. Because of this I would do all things to get a normal S3 without root. That in download mode it shows Original and 0 flashs. Than I would download Philz latest Touch Recovery, clean to install a new rom, download the ROM again, maybe there is a fault, than install it again and root it later, not than.
Hope I could help
Thanks guys! I think that was the general consensus then. I'm trying to follow this guide here
http://unbrick.itcse.com/unbrick-soft-bricked-samsung-galaxy-s3-i9300/
But when I download the Original 4.1.2 ROMS they dont have all the mentioned csc files nor do they have any PIT files in them either.
The only file included in the ZIP was a MD5 file which i guess is the PDA file.
Regardless, I'll give it a go. I've found some newer CWM recoveries but they seem to be IMG files instead of ZIP or MD5.
Any idea how to convert it. I'm getting the file directly from the CWM ROM MANAGER website.
Thanks for all the help again!
Firmware
If you like to download the latest Firmware form Samsung, than I have a link for you:
HTML:
http://www.sammobile.com/firmwares/3/?download=33625
Creat a free account on sammobile, than download it. Flash it on Odin select AP (On Odin3) or PDA on Odin 1.85.
Hit thanks if I helped you
Thanks man but I live in Taiwan so selected Taiwan.
I downloaded this one
http://www.sammobile.com/firmwares/3/?download=19112
and also another one but both did not have the PIT file.
When I try to use ODIN 3.09 it says fail due to THERE IS NO PIT PARTITION.
There is only one file thats supposed to be for PDA i guess.
I have tried older ODIN 1.85 too. NO PIT PARTITION ERROR
Help?
james0908 said:
Thanks man but I live in Taiwan so selected Taiwan.
I downloaded this one
http://www.sammobile.com/firmwares/3/?download=19112
and also another one but both did not have the PIT file.
When I try to use ODIN 3.09 it says fail due to THERE IS NO PIT PARTITION.
There is only one file thats supposed to be for PDA i guess.
Help?
Click to expand...
Click to collapse
Extract the file inside the ZIP File. Than go to odin and on Odin3.09 select AP! Not PIT. This works!
Yes Sir Thanks but I was doing that before. When I unzip there is 2 files.
One is MD5 file and the other one is SS_DL.dll file
I loaded it in AP slot in ODIN 3.09 and ODIN 1.85
Still gives PIT Partition Error!
Is there any PIT file that I can use that wont brick my phone??
I really dont want to brick this phone!
james0908 said:
Yes Sir Thanks but I was doing that before. When I unzip there is 2 files.
One is MD5 file and the other one is SS_DL.dll file
I loaded it in AP slot in ODIN 3.09 and ODIN 1.85
Still gives PIT Partition Error!
Is there any PIT file that I can use that wont brick my phone??
I really dont want to brick this phone!
Click to expand...
Click to collapse
You don't brike your phone this way. I never select the SS_DL.dll file. You just need the MD5 file and do this in AP. I do some research on that but it should work
Yes thanks man. Even Samsung Official readme says that I should do it that way but I still get PIT error when I load the .tar file in the zip.
If someone can link me a working .tar file with PIT as well I would greatly appreciate it!
Thank you all!
Thinking about it....
james0908 said:
Yes thanks man. Even Samsung Official readme says that I should do it that way but I still get PIT error when I load the .tar file in the zip.
If someone can link me a working .tar file with PIT as well I would greatly appreciate it!
Thank you all!
Click to expand...
Click to collapse
Maybe flash a Philz Touch recovery first. Here is a link:
HTML:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.48.4-i9300.zip.md5/
After that try again with the md5 from Sammobile
Thanks man. That one failed too. Some kind of binary error. I tried numerous other versions from the site
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/
Only the .tar ones load but when I start to flash it, the same PIT Partition error comes up.
I appreciate any and all help!
james0908 said:
Thanks man. That one failed too. Some kind of binary error. I tried numerous other versions from the site
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/
Only the .tar ones load but when I start to flash it, the same PIT Partition error comes up.
I appreciate any and all help!
Click to expand...
Click to collapse
God damm it. -.- sorry bro I can just give you a last advice. Download the S3 Android 4.1.2 from Sammobile and try this the same way.
Tkkg1994 said:
God damm it. -.- sorry bro I can just give you a last advice. Download the S3 Android 4.1.2 from Sammobile and try this the same way.
Click to expand...
Click to collapse
Those are the ones I have been downloading from Sammobile. I havent downloaded any of the 4.3 versions. I have tried many 4.1.2 versions
Unfortunately none of them have the PIT file included.
Thanks!
Any other suggestions??
james0908 said:
Those are the ones I have been downloading from Sammobile. I havent downloaded any of the 4.3 versions. I have tried many 4.1.2 versions
Unfortunately none of them have the PIT file included.
Thanks!
Any other suggestions??
Click to expand...
Click to collapse
Ah than try it with a 4.3 version!
Maybe this thread could help.
There is a download for a PIT file for GT-i9300 16GB version.
Tkkg1994 said:
Ah than try it with a 4.3 version!
Click to expand...
Click to collapse
Thanks I did but it did not come with a PIT file and flashing it did not work.
UPDATE
Turns out that my S3 had a faulty eMMC chip and had to have the chip and the motherboard replaced.
NOTE TO OWNERS OF 2012 MODEL I9300 GALAXY S3:
I did not know this before I had the problem but there is apparently an APP on the PLAY STORE called eMMC Brickbug App.
That will apparently check your eMMC status. Since I was not aware of this app beforehand I cannot say for sure if this app
does or does not work. However I previously owned and since gave away a 2013 late model Galaxy S3 which had no issues
whatsoever. From all the details that I have read, it seems that most 2012 models of the i9300 are more susceptible to this kind
of problem. If you own a 2012 model please take extra care when flashing any type of software, even if its original from Samsung!
Finally thanks to all the Posters who have attempted to help me out. I'm sure that all of your suggestions would have fixed the issue had my
phone not been hard bricked in the first place.
Hi,
I recently tried installing a new rom on my Samsung Galaxy SII i9100 with Lineage 14.1. The installing failed as there was a problem with some signature I didn't have.
I have since then tried flashing CWM recovery, multiple different stock roms via Odin, samsung kies firmware upgrade, factory reset, wipe cache, wipe dalvik cache yet nothing is working.
When I flash with Odin, everything flashes fine but after, when I try switching my phone on, the phone gets stuck in a bootloop. I can access recovery and download mode fine but cannot load my phone.
Please help as this is my main phone.:crying:
Start from scratch and follow this guide. https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601/
Apex Predator said:
Start from scratch and follow this guide. https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601/
Click to expand...
Click to collapse
Thanks for letting me know about this. I will try it today and let you know how it went.
Apex Predator said:
Start from scratch and follow this guide. https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601/
Click to expand...
Click to collapse
Hey again. I tried the link you sent me but my phone failed and this is what android system recovery said:
"This package is for 'galays2,i9100' devices; this is a ' '.
Any advice? I flashed stock rom before this and it (stock and new rom) still wont work.
Restore the firmware on Samsung GT-I9100 Galaxy S II
Hi, install everything according to these instructions.
flashed with my guide and with my shared pit file.
Restore the firmware on Samsung GT-I9100 Galaxy S II
Perhaps it will help.
toy_story said:
Hi, install everything according to these instructions.
flashed with my guide and with my shared pit file.
Restore the firmware on Samsung GT-I9100 Galaxy S II
Perhaps it will help.
Click to expand...
Click to collapse
Hi, the service firmware archive website has a broken link as I cannot download it on my computer.
ahsanovich said:
Hi, the service firmware archive website has a broken link as I cannot download it on my computer.
Click to expand...
Click to collapse
Hi, I moved the necessary files to androidfilehost.com, now the links should work, you can check.
https://androidfilehost.com/?fid=745849072291678877
Good luck to you.
toy_story said:
Hi, I moved the necessary files to androidfilehost.com, now the links should work, you can check.
https://androidfilehost.com/?fid=745849072291678877
Good luck to you.
Click to expand...
Click to collapse
Hi again. After I finished flashing via Odin, the phone rebooted into the screenshot below. I didn't know where to type the code so I rebooted system and the phone returned into a bootloop. Any ideas?
Did you use the pit file u1_02_20110310_emmc_EXT4.pit from the archive for Odin?
Do it again in Odin with the pit file u1_02_20110310_emmc_EXT4.pit
Put everything in Odin like on the screenshot!
toy_story said:
Did you use the pit file u1_02_20110310_emmc_EXT4.pit from the archive for Odin?
Do it again in Odin with the pit file u1_02_20110310_emmc_EXT4.pit
Put everything in Odin like on the screenshot!
Click to expand...
Click to collapse
I did it again with the pit file but it still shows the same error and is still stuck in a bootloop:crying: