Hi there,
I may have softbricked my i9300 S3 after failing to flash MIUI. I had the phone rooted already with custom recovery installed.
CWM 6.0.1.2. A friend recommended the recovery after he successfully installed it on his S3. I was running Android 4.1.2
so no Knox problems hopefully. I downloaded the latest MIUI rom for my phone directly from the official website and used the CWM
to try and flash it. My phone was already rooted at that stage and I had wiped cache and reset the phone prior to the flash attempt.
Unfortunately it gave me a Status 7 error. Even after I unrooted and rerooted my phone the error still remained. I read somewhere else
that this happens sometimes and so I edited the Updater-Script as suggested elsewhere and deleted the section pertaining to the
Verification process. I double checked I had the right ROM too and proceeded to wipe and flash again. It seemed to take and the phone
restarted and I was met with the MIUI language selection menu. However, when i tried to select English, the whole thing just froze and switched
off and restarted itself. But this time the screen went all weird and fuzzy and wouldnt boot back to MIUI interface. I tried to boot into recovery but with no luck. I have tried to reflash the recovery also with no luck. I have tried other versions of CWM alos without luck. Tried TWRP and also no luck. I have used both the 3.07 and the 1.85 version of ODIN with no luck. The flash would fail with either a PIT error or a COM port error. But I have all the necessary drivers installed. I have Kies but dont run it at the same time. The Emergency Firmware something also doesnt seem to work.
I have pictures of the various errors and such and can provide dropbox links if required
Any suggestions would be helpful.
Thanks!
Original Firmware
If I were you, I would go to Download Mode and Flash the Original Firmware from Samsung. Download it from the Sammobile Website and after you successfully installed it try it again.
Like Tkkg1994 said above download the Samsung firmware and use Odin to install it through download mode.
You were having a "Status 7" error when initially flashing miui because your CWM recovery was not the latest...download the latest cwm recovery (6.48.something not sure??) Then flash miui and hopefully you shouldn't have any problems.
Sent from a "Galaxy" far, far away with my Ultra Ray Gun
begin from bottom
Pulseuser said:
Like Tkkg1994 said above download the Samsung firmware and use Odin to install it through download mode.
You were having a "Status 7" error when initially flashing miui because your CWM recovery was not the latest...download the latest cwm recovery (6.48.something not sure??) Then flash miui and hopefully you shouldn't have any problems.
Sent from a "Galaxy" far, far away with my Ultra Ray Gun
Click to expand...
Click to collapse
Yes that's correct. Because of this I would do all things to get a normal S3 without root. That in download mode it shows Original and 0 flashs. Than I would download Philz latest Touch Recovery, clean to install a new rom, download the ROM again, maybe there is a fault, than install it again and root it later, not than.
Hope I could help
Thanks guys! I think that was the general consensus then. I'm trying to follow this guide here
http://unbrick.itcse.com/unbrick-soft-bricked-samsung-galaxy-s3-i9300/
But when I download the Original 4.1.2 ROMS they dont have all the mentioned csc files nor do they have any PIT files in them either.
The only file included in the ZIP was a MD5 file which i guess is the PDA file.
Regardless, I'll give it a go. I've found some newer CWM recoveries but they seem to be IMG files instead of ZIP or MD5.
Any idea how to convert it. I'm getting the file directly from the CWM ROM MANAGER website.
Thanks for all the help again!
Firmware
If you like to download the latest Firmware form Samsung, than I have a link for you:
HTML:
http://www.sammobile.com/firmwares/3/?download=33625
Creat a free account on sammobile, than download it. Flash it on Odin select AP (On Odin3) or PDA on Odin 1.85.
Hit thanks if I helped you
Thanks man but I live in Taiwan so selected Taiwan.
I downloaded this one
http://www.sammobile.com/firmwares/3/?download=19112
and also another one but both did not have the PIT file.
When I try to use ODIN 3.09 it says fail due to THERE IS NO PIT PARTITION.
There is only one file thats supposed to be for PDA i guess.
I have tried older ODIN 1.85 too. NO PIT PARTITION ERROR
Help?
james0908 said:
Thanks man but I live in Taiwan so selected Taiwan.
I downloaded this one
http://www.sammobile.com/firmwares/3/?download=19112
and also another one but both did not have the PIT file.
When I try to use ODIN 3.09 it says fail due to THERE IS NO PIT PARTITION.
There is only one file thats supposed to be for PDA i guess.
Help?
Click to expand...
Click to collapse
Extract the file inside the ZIP File. Than go to odin and on Odin3.09 select AP! Not PIT. This works!
Yes Sir Thanks but I was doing that before. When I unzip there is 2 files.
One is MD5 file and the other one is SS_DL.dll file
I loaded it in AP slot in ODIN 3.09 and ODIN 1.85
Still gives PIT Partition Error!
Is there any PIT file that I can use that wont brick my phone??
I really dont want to brick this phone!
james0908 said:
Yes Sir Thanks but I was doing that before. When I unzip there is 2 files.
One is MD5 file and the other one is SS_DL.dll file
I loaded it in AP slot in ODIN 3.09 and ODIN 1.85
Still gives PIT Partition Error!
Is there any PIT file that I can use that wont brick my phone??
I really dont want to brick this phone!
Click to expand...
Click to collapse
You don't brike your phone this way. I never select the SS_DL.dll file. You just need the MD5 file and do this in AP. I do some research on that but it should work
Yes thanks man. Even Samsung Official readme says that I should do it that way but I still get PIT error when I load the .tar file in the zip.
If someone can link me a working .tar file with PIT as well I would greatly appreciate it!
Thank you all!
Thinking about it....
james0908 said:
Yes thanks man. Even Samsung Official readme says that I should do it that way but I still get PIT error when I load the .tar file in the zip.
If someone can link me a working .tar file with PIT as well I would greatly appreciate it!
Thank you all!
Click to expand...
Click to collapse
Maybe flash a Philz Touch recovery first. Here is a link:
HTML:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.48.4-i9300.zip.md5/
After that try again with the md5 from Sammobile
Thanks man. That one failed too. Some kind of binary error. I tried numerous other versions from the site
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/
Only the .tar ones load but when I start to flash it, the same PIT Partition error comes up.
I appreciate any and all help!
james0908 said:
Thanks man. That one failed too. Some kind of binary error. I tried numerous other versions from the site
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/
Only the .tar ones load but when I start to flash it, the same PIT Partition error comes up.
I appreciate any and all help!
Click to expand...
Click to collapse
God damm it. -.- sorry bro I can just give you a last advice. Download the S3 Android 4.1.2 from Sammobile and try this the same way.
Tkkg1994 said:
God damm it. -.- sorry bro I can just give you a last advice. Download the S3 Android 4.1.2 from Sammobile and try this the same way.
Click to expand...
Click to collapse
Those are the ones I have been downloading from Sammobile. I havent downloaded any of the 4.3 versions. I have tried many 4.1.2 versions
Unfortunately none of them have the PIT file included.
Thanks!
Any other suggestions??
james0908 said:
Those are the ones I have been downloading from Sammobile. I havent downloaded any of the 4.3 versions. I have tried many 4.1.2 versions
Unfortunately none of them have the PIT file included.
Thanks!
Any other suggestions??
Click to expand...
Click to collapse
Ah than try it with a 4.3 version!
Maybe this thread could help.
There is a download for a PIT file for GT-i9300 16GB version.
Tkkg1994 said:
Ah than try it with a 4.3 version!
Click to expand...
Click to collapse
Thanks I did but it did not come with a PIT file and flashing it did not work.
UPDATE
Turns out that my S3 had a faulty eMMC chip and had to have the chip and the motherboard replaced.
NOTE TO OWNERS OF 2012 MODEL I9300 GALAXY S3:
I did not know this before I had the problem but there is apparently an APP on the PLAY STORE called eMMC Brickbug App.
That will apparently check your eMMC status. Since I was not aware of this app beforehand I cannot say for sure if this app
does or does not work. However I previously owned and since gave away a 2013 late model Galaxy S3 which had no issues
whatsoever. From all the details that I have read, it seems that most 2012 models of the i9300 are more susceptible to this kind
of problem. If you own a 2012 model please take extra care when flashing any type of software, even if its original from Samsung!
Finally thanks to all the Posters who have attempted to help me out. I'm sure that all of your suggestions would have fixed the issue had my
phone not been hard bricked in the first place.
Related
Hello everyone. I bricked my US Galaxy Player 4.0 after trying to install a certain ROM for it.
i visited this page:
http://forum.xda-developers.com/showthread.php?t=1531850
for the stock rom and tried to flash the PIT file along with a ROM's PDA file. All i keep getting when i try to reboot it is the Samsung logo followed by the image i'm going to attach to this.
I can get into download mode and everything, i think it's just a matter of having the right files to flash, etc. Can anyone help me out?
ziggs4lyfe said:
Hello everyone. I bricked my US Galaxy Player 4.0 after trying to install a certain ROM for it.
i visited this page:
http://forum.xda-developers.com/showthread.php?t=1531850
for the stock rom and tried to flash the PIT file along with a ROM's PDA file. All i keep getting when i try to reboot it is the Samsung logo followed by the image i'm going to attach to this.
I can get into download mode and everything, i think it's just a matter of having the right files to flash, etc. Can anyone help me out?
Click to expand...
Click to collapse
follow the proper instructions in that link with the proper files for the US version, when using those files to recover you use Heimdall not ODIN, also make you have a good backup of your EFS.tar or you'll be like me after screwing around with the CM7 beta's and not have a lockscreen or powermenu.
Simple flashing the PIT and the "stock" .tar via Odin will NOT work, I assume your trying to use Odin because you say "with a ROM's PDA file" and there is no PDA box if you are doing what that link says to do for the US version.
That's exactly how I bricked my Galaxy Player 4. Except that I can't enter recovery or download mode. I have to enter download mode with Adam's Resurrector. I used Heimdall with those files and I keep getting error: failed to receive response. So I have no way to revive my player.
ziggs4lyfe said:
Hello everyone. I bricked my US Galaxy Player 4.0 after trying to install a certain ROM for it.
i visited this page:
http://forum.xda-developers.com/showthread.php?t=1531850
for the stock rom and tried to flash the PIT file along with a ROM's PDA file. All i keep getting when i try to reboot it is the Samsung logo followed by the image i'm going to attach to this.
I can get into download mode and everything, i think it's just a matter of having the right files to flash, etc. Can anyone help me out?
Click to expand...
Click to collapse
Did you wipe your data?
Sent from my GT-I9000 using xda premium
zaclimon said:
Did you wipe your data?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
yea, he should do it at first after flashing right kernel and rom, factory reset, format cache, clean dalvik and fix permissions, if not through CWM, just manualy (adb console)
Mine is hard bricked, but I can still get into download mode with the resurrector. But when I try to flash the correct rom and kernel, I get the following error in Heimdall: "kernel upload failed", anyone how to fix this?
Thats just soft bricking ur fine go back to stock start over find the stock tar files
Sent from my SAMSUNG-SGH-I997 using XDA
Sorry to confuse you, mine is most definitely hard bricked.
Hey guys
this morning i woke up with my s2 telling me that there is a firmware update
I said yes, my phone reset itself and just samsung s2 with a ! triangle appears
I can get into download manager
I want to try odin, I've download a few things but for the PDA part it looks for a .tar .md5
I extract the Rom zip but there is nothing inside of it with those things... so i cant flash anything
please help??please :$
Then try another zip instead?
BTW Zip is for Recovery but it seems like you know this since you knew that tar/md5 files are for ODIN
Flash Siyah maybe? you can get the .tar from here
Make sure you put it in PDA and re-partitition is NOT checked.
Cheers.
root
hey bro
fianlly got it to boot after flashing stock rom LSD
how do i root it now?
HoboDesire said:
how do i root it now?
Click to expand...
Click to collapse
To root, flash a custom kernel using Odin.
Think about to see if the Kernel or ROM is compatible with your SGS2 and with your version etc.
Cheers.
Hey guys!
I think i could use some help on handling my GT I9300
I was on Paranoid Android 3.15 and flashed miuiandroid_m0_jb-3.4.12
It worked for me for about 40 hours- no problems at all.
While i was setting up my phone and reinstalling my apps clockworkmod told me that there is an update. I could update to a version that i already installed a couple of days ago but somehow the app showed me i am running on an older version. After trying to update clockworkmod it told me that an error occured while updating.
Didnt take care of it because i went to bed and wanted to continue later this evening.
Some hours ago (i already used my phone as usual) my phone restartet and stuck on the samsung logo.
When i plug in the charger no led turns on. Sometimes the Samsung logo changes to the charging animation but it seems that the animation is frozen.
I cannot enter recovery mode only download mode.
What i have tried till now was:
trying to flash a stock rom with odin 3.7- Odin told me something like there was no pit file found.
trying to flash an odin flashable cutom rom- some error as above.
trying to flash a 3 parted rom with pit file- odin was stuck on "Get PIT for mapping" and nothing happened for about 60 minutes.
I have uses both GT-I9300_mx_20120220.pit and GT-I9300_mx_20120329.pit
CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5
CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5
MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5
On Odin 1.85 the repartition fails
Now i am pretty clueless and i hope that someone could tell me a solution
Oh i almost forgot.
in Odin mode my description is:
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Thanks in advance!
You could try flashing CF-root with odin and see if that works. If it does you should have access to recovery.
wangdaning said:
You could try flashing CF-root with odin and see if that works. If it does you should have access to recovery.
Click to expand...
Click to collapse
Oh i sorry. forgot to write down that i already tried this aswell-but without .pit file. That was one of my first ideas because i wanted to avoid repartitioning.
Same error in odin- no pit found.
Should i try to just flash cf root with the .pit file? or would this cause even more damage?
Alan D said:
Hey guys!
I think i could use some help on handling my GT I9300
I was on Paranoid Android 3.15 and flashed miuiandroid_m0_jb-3.4.12
It worked for me for about 40 hours- no problems at all.
While i was setting up my phone and reinstalling my apps clockworkmod told me that there is an update. I could update to a version that i already installed a couple of days ago but somehow the app showed me i am running on an older version. After trying to update clockworkmod it told me that an error occured while updating.
Didnt take care of it because i went to bed and wanted to continue later this evening.
Some hours ago (i already used my phone as usual) my phone restartet and stuck on the samsung logo.
When i plug in the charger no led turns on. Sometimes the Samsung logo changes to the charging animation but it seems that the animation is frozen.
I cannot enter recovery mode only download mode.
What i have tried till now was:
trying to flash a stock rom with odin 3.7- Odin told me something like there was no pit file found.
trying to flash an odin flashable cutom rom- some error as above.
trying to flash a 3 parted rom with pit file- odin was stuck on "Get PIT for mapping" and nothing happened for about 60 minutes.
I have uses both GT-I9300_mx_20120220.pit and GT-I9300_mx_20120329.pit
CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5
CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5
MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5
On Odin 1.85 the repartition fails
Now i am pretty clueless and i hope that someone could tell me a solution
Oh i almost forgot.
in Odin mode my description is:
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Thanks in advance!
Click to expand...
Click to collapse
i dont know if this will work , but you could try it , try flashing resurrection rom from the checkrom website through odin in download mode
http://www.youtube.com/watch?v=ZNaQfdOi56E
Is it possible to flash only recovery image with Odin? I've been doing that with Mobile Odin, so I guess it might be possible with Odin as well?
galaxys3lover said:
i dont know if this will work , but you could try it , try flashing resurrection rom from the checkrom website through odin in download mode]
Click to expand...
Click to collapse
This was the custom rom i mentioned above. Have forgotten the name so i only wrote via odin flashable custom rom. Same issue there "there is no PIT Partition"
The "best" result untill now was trying to flash a 3 parted rom with PIT but odin seems to freeze on getting pit. Or at least nothing happened after an hour
Usual is wrong PIT for your phone or PIT partition damaged .
Take it to a service centre .
jje
JJEgan said:
Usual is wrong PIT for your phone or PIT partition damaged .
Take it to a service centre .
jje
Click to expand...
Click to collapse
I went to my provider today and gave it back to send it to service. I don't seem to be the first one who gave the phone back with the same issues. Usually it takes about one or two weeks till they have checked the phone and decide if the repair or replace the phone. Today the nice lady in the shop told me that they will send it back on monday and a replacement will arrive on monday aswell.
Thanks anyways
A while ago my phone started to restart itself for no good reason. Then it got worse and it starts randomly resetting itself (factory reset). To solve this issue I tried to do a manual factory reset myself, and the problem persisted.
I can deal with these random restarts, but then one day as it restarts it got stuck at the "Samsung Galaxy S3" screen. I tried to do another factory reset in CWM and clear the cache, but it says "E:\cache\...." isn't mounted. As I investigate further it seems the reason that it can't boot might be because the memory is not mounted I guess?
I can boot into Download mode and CWM perfectly fine, so I decided to try to flash the Stock Recovery and Stock ROM through Odin. Connection between Odin and the phone was set up fine, but then it stopped at this error message "Complete(Write) operation failed." Flashing either stock rom and recovery yields the same error . It simply can't write to the memory it seems.
Now I'm stuck at this start screen. I've heard flashing a PIT file might be able to fix it, but I have no idea what that is.
Is the phone bricked? How do I fix this? Should I use the Rescue Firmware in this post? It would be great if anyone can help me since I have been asking for help on other forums but got absolutely no response...
GT-i9300
If you can boot to download mode you can try to use the rescue firmware. No, it isn't bricked because it still works
Thanks for the response! I'm going to try the rescue firmware, but I see that it says "KOR" on the file name. Is that referring to "Korea"? My phone isn't bought in Korea does that matter? Also what's the CSC thing it's talking about?
Your description matches emmc corruption/failure, so it is a software brick.
Follow the guide for the rescue firmware it doesn't matter about the country or CSC, but make sure you include the pit file.
If that fails to flash then it's time for a new phone.
boomboomer said:
Follow the guide for the rescue firmware it doesn't matter about the country or CSC, but make sure you include the pit file.
Click to expand...
Click to collapse
I just downloaded the zip file, but it seems like it doesn't have a pit file inside. So where can I get that file? Thanks again.
DerekL. said:
I just downloaded the zip file, but it seems like it doesn't have a pit file inside. So where can I get that file? Thanks again.
Click to expand...
Click to collapse
There are two versions in the rescue firmware page 4.1.2 and 4.3 the pit file is in the 4.1.2 version and can be used on both.
Now I tried to flash them with Odin 3.07, it doesn't fail nor success. Instead it got stuck at "Get PIT for mapping.." I read that this might be a driver problem, but I've reinstalled my drivers, and I even tried all the usb ports on my computer. I've terminated Kies' process, but it's still not working!
What should I do to get Odin to write onto the device???
boomboomer said:
Your description matches emmc corruption/failure, so it is a software brick.
Follow the guide for the rescue firmware.
If that fails to flash then it's time for a new phone.
Click to expand...
Click to collapse
It won't write for a reason, the emmc chip is damaged.
Hi,
I recently tried installing a new rom on my Samsung Galaxy SII i9100 with Lineage 14.1. The installing failed as there was a problem with some signature I didn't have.
I have since then tried flashing CWM recovery, multiple different stock roms via Odin, samsung kies firmware upgrade, factory reset, wipe cache, wipe dalvik cache yet nothing is working.
When I flash with Odin, everything flashes fine but after, when I try switching my phone on, the phone gets stuck in a bootloop. I can access recovery and download mode fine but cannot load my phone.
Please help as this is my main phone.:crying:
Start from scratch and follow this guide. https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601/
Apex Predator said:
Start from scratch and follow this guide. https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601/
Click to expand...
Click to collapse
Thanks for letting me know about this. I will try it today and let you know how it went.
Apex Predator said:
Start from scratch and follow this guide. https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601/
Click to expand...
Click to collapse
Hey again. I tried the link you sent me but my phone failed and this is what android system recovery said:
"This package is for 'galays2,i9100' devices; this is a ' '.
Any advice? I flashed stock rom before this and it (stock and new rom) still wont work.
Restore the firmware on Samsung GT-I9100 Galaxy S II
Hi, install everything according to these instructions.
flashed with my guide and with my shared pit file.
Restore the firmware on Samsung GT-I9100 Galaxy S II
Perhaps it will help.
toy_story said:
Hi, install everything according to these instructions.
flashed with my guide and with my shared pit file.
Restore the firmware on Samsung GT-I9100 Galaxy S II
Perhaps it will help.
Click to expand...
Click to collapse
Hi, the service firmware archive website has a broken link as I cannot download it on my computer.
ahsanovich said:
Hi, the service firmware archive website has a broken link as I cannot download it on my computer.
Click to expand...
Click to collapse
Hi, I moved the necessary files to androidfilehost.com, now the links should work, you can check.
https://androidfilehost.com/?fid=745849072291678877
Good luck to you.
toy_story said:
Hi, I moved the necessary files to androidfilehost.com, now the links should work, you can check.
https://androidfilehost.com/?fid=745849072291678877
Good luck to you.
Click to expand...
Click to collapse
Hi again. After I finished flashing via Odin, the phone rebooted into the screenshot below. I didn't know where to type the code so I rebooted system and the phone returned into a bootloop. Any ideas?
Did you use the pit file u1_02_20110310_emmc_EXT4.pit from the archive for Odin?
Do it again in Odin with the pit file u1_02_20110310_emmc_EXT4.pit
Put everything in Odin like on the screenshot!
toy_story said:
Did you use the pit file u1_02_20110310_emmc_EXT4.pit from the archive for Odin?
Do it again in Odin with the pit file u1_02_20110310_emmc_EXT4.pit
Put everything in Odin like on the screenshot!
Click to expand...
Click to collapse
I did it again with the pit file but it still shows the same error and is still stuck in a bootloop:crying: