I have made a FTF file of the original ICS firmware.
It might come in handy in case you want to restore the phone's original ROM or save yourself from a phone brick , just flash it via Flashtool.
Tested myself and it works.
For the newbies: while flashing it via Flashtool you need to press VolDow and plug in the usb to enter flashmode (green led), the image shown in the process might confuse you...
Sorry, download no more available.
Download: Xperia_Go_ST27i_6.1.1.B.1.1.0_Sony.ftf (362MB)
teocomi said:
I have made a FTF file of the original ICS firmware.
It might come in handy in case you want to restore the phone's original ROM or save yourself from a phone brick , just flash it via Flashtool.
Tested myself and it works.
For the newbies: while flashing it via Flashtool you need to press VolDow and plug in the usb to enter flashmode (green led), the image shown in the process might confuse you...
Download: Xperia_Go_ST27i_6.1.1.B.1.1.0_Sony.ftf
If it helps, please press THANKS.
Click to expand...
Click to collapse
Thanks very much teocomi.
I'm searching it till morning.
Any good theme for xperia go ?
I'm making , but if u have, please post yaarrrr......
Thanks again.
munna_jast said:
Thanks very much teocomi.
I'm searching it till morning.
Any good theme for xperia go ?
I'm making , but if u have, please post yaarrrr......
Thanks again.
Click to expand...
Click to collapse
I'm sorry I think you're a bit off topic. However I don't, just using the default from CM9.
teocomi said:
I have made a FTF file of the original ICS firmware.
It might come in handy in case you want to restore the phone's original ROM or save yourself from a phone brick , just flash it via Flashtool.
Tested myself and it works.
For the newbies: while flashing it via Flashtool you need to press VolDow and plug in the usb to enter flashmode (green led), the image shown in the process might confuse you...
Download: Xperia_Go_ST27i_6.1.1.B.1.1.0_Sony.ftf
If it helps, please press THANKS.
Click to expand...
Click to collapse
thanks..is it uk version or what?
mrxperia12 said:
thanks..is it uk version or what?
Click to expand...
Click to collapse
Have no idea, phone comes from NL.
teocomi said:
Have no idea, phone comes from NL.
Click to expand...
Click to collapse
did u root ur phone ?
i currently use tft from hk version and i can't root my phone:crying:
mrxperia12 said:
did u root ur phone ?
i currently use tft from hk version and i can't root my phone:crying:
Click to expand...
Click to collapse
Yes, I managed flashing krachlatte's kernel. Remember to unlock the bootloader.
teocomi said:
Yes, I managed flashing krachlatte's kernel. Remember to unlock the bootloader.
Click to expand...
Click to collapse
i wanna to root without ub..how?
mrxperia12 said:
i wanna to root without ub..how?
Click to expand...
Click to collapse
Some roms claimed to root without having to unlock, never tried them out, sorry.
mrxperia12 said:
i wanna to root without ub..how?
Click to expand...
Click to collapse
If you have ICS (and Backup & Restore Application) in your device, you can root without unlocking the bootloader. Just go here.
Thanks,
B.
---------- Post added at 06:52 PM ---------- Previous post was at 06:49 PM ----------
teocomi said:
I have made a FTF file of the original ICS firmware.
It might come in handy in case you want to restore the phone's original ROM or save yourself from a phone brick , just flash it via Flashtool.
Tested myself and it works.
For the newbies: while flashing it via Flashtool you need to press VolDow and plug in the usb to enter flashmode (green led), the image shown in the process might confuse you...
Download: Xperia_Go_ST27i_6.1.1.B.1.1.0_Sony.ftf
If it helps, please press THANKS.
Click to expand...
Click to collapse
Thanks much. Is it possible for you to find the Stock ICS 6.1.1.B.1.54 FTF? I'd been searching for this one for quite a long time!
will this work for st27a
Can someone please confirm if this firmware works in India version of Xperia Go?
idriff said:
will this work for st27a
Click to expand...
Click to collapse
Sure. Its make it st27i after...
xperia_88 said:
Sure. Its make it st27i after...
Click to expand...
Click to collapse
but you can edit that to make it a st27a on build.prop file located on /system
mrxperia12 said:
i wanna to root without ub..how?
Click to expand...
Click to collapse
You need flash .10 FW and then root by Bin4ry, and flash .54 again
Gửi từ ST27i của tôi bằng cách sử dụng Tapatalk 2
teocomi said:
I have made a FTF file of the original ICS firmware.
It might come in handy in case you want to restore the phone's original ROM or save yourself from a phone brick , just flash it via Flashtool.
Tested myself and it works.
For the newbies: while flashing it via Flashtool you need to press VolDow and plug in the usb to enter flashmode (green led), the image shown in the process might confuse you...
Download: Xperia_Go_ST27i_6.1.1.B.1.1.0_Sony.ftf
If it helps, please press THANKS.
Click to expand...
Click to collapse
hey can any1 tell me that exactly how big is this FTF file ?
actually the thing is that when i started downloading it, it didnt show how big it was... it was just being downloaded without showing how many MB remaining... so the file i have now is of 362MB, which i dont know that if its the full file or it just stopped somewhere in middle... so plz help me
Nakulkhanna said:
hey can any1 tell me that exactly how big is this FTF file ?
actually the thing is that when i started downloading it, it didnt show how big it was... it was just being downloaded without showing how many MB remaining... so the file i have now is of 362MB, which i dont know that if its the full file or it just stopped somewhere in middle... so plz help me
Click to expand...
Click to collapse
Size is correct, 362MB.
teocomi said:
Size is correct, 362MB.
Click to expand...
Click to collapse
thanks a lot bro...
Related
Tip: if the flashtool not regonize your phone, use pc companion to install the SEMC Usb Driver
to let flashtool regonizing your phone.
howto do: use pc companion, do what it says,
if it says: you have already the new update, press recover, he install the SEMC Usb Driver,
then press cancel.
Now you have the Semc Usb Driver installed on your Pc/Laptop.
Updated with the new kernel from DooMlord.
read this carefully:
http://forum.xda-developers.com/showthread.php?t=1254087
i do this:
1: Please make sure you have enabled usb-debugging in your current rom before starting with this!!
2: flash the azuzu kernel downgrade ftf with flashtool
then do this and download this
http://forum.xda-developers.com/showthread.php?t=1256430
if it no respond just wait, i must have his superuser action regonize
then do this:
3: after unlocking is finish you have to flash azuzu kernel upgrade
4: now power on phone to check if the phone is starting after the unlock (if you are using a custom kernel yet with the bypass method and get stuck in a bootloop enter xrecovery and clear dalvik-cache, then your phone should boot up again fine)
power off phone and flash X10_2.3.3_DooMKernel-v06-FS-BootManager-v1.4.ftf
with flashtool
now reboot your phone and go to XRecovery and install the zipfile: x10_gb_DooMKernel-v05a-FS_wifi modules
power on phone again and if everything is right, read the line under that one
WOOOHOOO!!! Here you are with unlocked bootloader, custom kernel directly loaded AND without reflashing any rom, means you have kept your current installation
Doom his files:
Flash this with flashtool: http://www.multiupload.com/ISV5FMZHJ0
install this with xrecovery: http://www.multiupload.com/XMB0OO8PWH
i do it like this and it works !
Important !! If you are using the Unlocking Bootloader tool, just wait, do nothing,
He must get his acces to superuser, look at the letters/numbers in the tool
[*] >> run ADB in tools as administrator of x10 bootloader dont work, after that it works !
press hard but safely the Thanks button !!
succes !!!
p.s. i help a friend yeeyon1990 and myself and maybe more.
Its working !!
Thanks to:
DooMlord
Mayazcherquoi
9Lukas5
The_Laser
What's the difference of using the latest flashtool 0.4.2 by having stock 2.3.3 firmware and rooting and unlocking the bootloader using the latest flashtool?
Eugene1991 said:
What's the difference of using the latest flashtool 0.4.2 by having stock 2.3.3 firmware and rooting and unlocking the bootloader using the latest flashtool?
Click to expand...
Click to collapse
none except...it´s easier
Crowds said:
none except...it´s easier
Click to expand...
Click to collapse
yes indeed, but i post this, by some peeps dont work the new flashtool.
and i do it like this and yes it works.
This is just a rehash of the guide in the sticky in this section by lukas
It is not an easier method, using flashtool 0.4.2.0 is the currently the easiest method.
gregbradley said:
This is just a rehash of the guide in the sticky in this section by lukas
It is not an easier method, using flashtool 0.4.2.0 is the currently the easiest method.
Click to expand...
Click to collapse
Greg i know mate, but my friend yeeyon1990
have everything tried and this works for him and for me,
he was using the new flashtool but that doesnt work for him(no phone regnize or something) and this one works for him, how i explained here, so that why i makin this thread to help other peeps, i hope you will understand thit, why is start this one.
Regards
lex1986 said:
Greg i know mate, but my friend yeeyon1990
have everything tried and this works for him and for me,
he was using the new flashtool but that doesnt work for him(no phone regnize or something) and this one works for him, how i explained here, so that why i makin this thread to help other peeps, i hope you will understand thit, why is start this one.
Regards
Click to expand...
Click to collapse
OK, if it works some people, but maybe just directing to people to the sticky would be good.
Its always good to help people, I wasnt having a go...many thanks for trying to help people
I am very disappoint :-( I tried every think . And finally using the official Rom of se.
Sent from my X10i using XDA App
I think you missed someone in the credits list.
Sent from my X10i using XDA App
Hzu said:
I think you missed someone in the credits list.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Guess you mean the_laser?
9Lukas5 said:
Guess you mean the_laser?
Click to expand...
Click to collapse
Yeah thankx, i forgot the...laser
I do it when im home on sunday, sorry to forgot him.
Remember sunday is my birthday!!!
Sent from my X10i phone
lex1986 said:
Yeah thankx, i forgot the...laser
I do it when im home on sunday, sorry to forgot him.
Remember sunday is my birthday!!!
Sent from my X10i phone
Click to expand...
Click to collapse
You can still edit posts from the phone app, long press on the post you need edit, click on modify, click on edit, then add the_laser
Sent from my X10i using xda premium
gregbradley said:
You can still edit posts from the phone app, long press on the post you need edit, click on modify, click on edit, then add the_laser
Sent from my X10i using xda premium
Click to expand...
Click to collapse
you happy now? Hahaha, just kiddin mate, its done and thanks for the info.
Sent from my X10i using XDA Premium App
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
Click to expand...
Click to collapse
Because you now baseband and kernel for 2.1. Thats normal, now unlock your bootloader.
.....flash the azuzu kernel downgrade ftf with flashtool
disconnect usb cable, press power button until phone vibrates shortly and immidiatly connect the usb cable again......
---------- Post added at 12:42 PM ---------- Previous post was at 12:35 PM ----------
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
Click to expand...
Click to collapse
Repair with seus, then root your phone with flashtool 0.4.2.0 and then unlocked bl.
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
Click to expand...
Click to collapse
no man just read better:
then do this and download this
http://forum.xda-developers.com/showthread.php?t=1256430
if it no respond just wait, i must have his superuser action regonize
you must just wait mate and read the letters in the bootloader tool what it do with the superuser (he must get his acces), i got it to. you must do nothing.
just wait patiently and it gonna be alright.
Thanks, it worked. Sorry, it really was simple.
bbluff said:
Thanks, it worked. Sorry, it really was simple.
Click to expand...
Click to collapse
no problem mate, i told it`s working,
i do it with these steps, thats why im posting this.
yes its simple.
read, be smart and its working
cheers
i got a problem.
i root my hp X10 mini and install Xrecovery....
beside that i also put my android 2.3 gingerbread in my sd card...
after that i go recovery to install android 2.3...
first it is install normally...then it will turn back to recovery menu....
i thought nothing problem so i reboot it...
after reboot...it just show sony ericsson then i wait to open...
but it cant open and it just show sony ericsson few minutes then restart restart and restart....
it mean i lose to install update???
what should i do???
it cant charge using charger but using USB it got respone(just got respone when show sony ericsson)...
help me pls!!!thanks
i also want to know how to open my system using USB...TQ!!!
What exactly are you trying to do? Flash a new ROM?
Sent from my U20i using XDA App
wong950323 said:
i got a problem.
i root my hp X10 mini and install Xrecovery....
beside that i also put my android 2.3 gingerbread
Click to expand...
Click to collapse
You can't run a gingerbread rom with the stock kernel! Thats why you stick on the stock kernel logo (sony ericcson). Read the first post of the rom you flashed carefully. Isn't there something like you need costum kernel, unlock bootloader first...
What Rom did you Flash?
I hope you did a Backup in recovery ?
Did you follow the install instructions? Full wipe... Tell us a bit more, so we ca help you
U20i/nAaCM7+Kernel/XDAPremium
wong950323 said:
i got a problem.
i root my hp X10 mini and install Xrecovery....
beside that i also put my android 2.3 gingerbread in my sd card...
after that i go recovery to install android 2.3...
first it is install normally...then it will turn back to recovery menu....
i thought nothing problem so i reboot it...
after reboot...it just show sony ericsson then i wait to open...
but it cant open and it just show sony ericsson few minutes then restart restart and restart....
it mean i lose to install update???
what should i do???
it cant charge using charger but using USB it got respone(just got respone when show sony ericsson)...
help me pls!!!thanks
i also want to know how to open my system using USB...TQ!!!
Click to expand...
Click to collapse
First if your phone does not boot you need to connect your phone to sony ericsson update service and press on your phone home button+power button/unlock button+back button the same time and the seus it will reinstal again your stock rom,later reroot your phone and unlock it and at the finish take a kernel and istall it with flashtool of binary and later of this install your rom
if you help you press the thanks button
i understand but i got something confused what did u say
CrazyGamerGR said:
First if your phone does not boot you need to connect your phone to sony ericsson update service and press on your phone home button+power button/unlock button+back button the same time and the seus it will reinstal again your stock rom,later reroot your phone and unlock it and at the finish take a kernel and istall it with flashtool of binary and later of this install your rom
if you help you press the thanks button
Click to expand...
Click to collapse
what is the seus???i just didn't understand back part did you saying something like‘at the finish take a kernel and istall it with flashtool of binary and later of this install your rom’
where did i find it the flashtool you also need me to connect my phone to sony ericsson update service(you mean sony ericsson companion)
SEUS is the Sony Ericsson Update Service. As the name says, it updates your phone and repairs if necessary.
If you are trying to flash a new ROM, you have to unlock bootloader first, install custom kernel and then flash the new ROM. Look for the tutorials, they should help.
Sent from my U20i using XDA App
Yes
hiratafabio said:
What exactly are you trying to do? Flash a new ROM?
Sent from my U20i using XDA App
Click to expand...
Click to collapse
yes...does mean i flash wrong？？？how to i do...
thanks
hiratafabio said:
SEUS is the Sony Ericsson Update Service. As the name says, it updates your phone and repairs if necessary.
If you are trying to flash a new ROM, you have to unlock bootloader first, install custom kernel and then flash the new ROM. Look for the tutorials, they should help.
Click to expand...
Click to collapse
erm...need to download bootloader and custom kernel???you got link for the tutorials???
wong950323 said:
erm...need to download bootloader and custom kernel???you got link for the tutorials???
Click to expand...
Click to collapse
You need to unlock the Bootloader. Then you can flash a Costum Kernel. Use The flashtool, it's a Genius "one big Button Tool" from Bin4ry and Androxyde Thank and Donate to them. Read here: http://forum.xda-developers.com/showthread.php?p=10881307. Its a "How to Guide". The Flashtool you can get here: http://androxyde.github.com/Flashtool I hope this helps. Happy modding
U20i/nAaCM7+Kernel/XDAPremium
Before flashing a custom kernel, be sure you meet the requirements to do so. I mean, sometimes you need a specific baseband version in order for the kernel to work properly
Sent from my U20i using XDA App
link
domics said:
The Flashtool you can get here: http://androxyde.github.com/Flashtool I hope this helps. Happy modding
Click to expand...
Click to collapse
is the link can be use???i download and the file was have been damage...
Which rom are you trying to flash?
wong950323 said:
is the link can be use???i download and the file was have been damage...
Click to expand...
Click to collapse
So you try to download the flashtool? Try to download again, it's a Server problem. When i dowloaded the newest Version it took me 5 ! Times. The fifth Time 45 min to download it. Juste try again when the download stops
U20i/nAaCM7+Kernel/XDAPremium
domics said:
The Flashtool you can get here: http://androxyde.github.com/Flashtool I hope this helps.
Click to expand...
Click to collapse
is this link fake???i can't download it
http://forum.xda-developers.com/show...php?p=10881307 this i download it and install...it say want ftf file right???i wanna download ftf file???
i open flashtool and connect my phone it say'For 2011 devices line, be sure you are not in MTP mode
'what mean???hope you can save my phone
01007653 said:
Which rom are you trying to flash?
Click to expand...
Click to collapse
android 2.3 gingerbread
wong950323 said:
android 2.3 gingerbread
Click to expand...
Click to collapse
But are you trying to flash a custom ROM, right? What version? I mean, there is a bunch out there: MiniCM7, CM7MiniPro, GingerDX, etc.
Specifying it would be a lot helpful for us, too.
wong950323 said:
is this link fake???i can't download it
Click to expand...
Click to collapse
No it is the Homepage of the Flashtool. 100% real . But lets start from the beginning and please be more specific! Did you repair your Phone with SE Companion? Or are you trying to Flash over and over again? When you have a bootloop the Flashtool can't reconize your Phone
U20i/nAaCM7+Kernel/XDAPremium
domics said:
No it is the Homepage of the Flashtool. 100% real . But lets start from the beginning and please be more specific! Did you repair your Phone with SE Companion? Or are you trying to Flash over and over again? When you have a bootloop the Flashtool can't reconize your Phone
U20i/nAaCM7+Kernel/XDAPremium
Click to expand...
Click to collapse
ok...i just using SEUS...now done already...thanks guys
wong950323 said:
ok...i just using SEUS...now done already...thanks guys
Click to expand...
Click to collapse
Great . I hope you will try again flashing roms!? It is nearly impossible to brick your phone, if you follow the instrucions and always flash the right rom for your phone model.
U20i/nAaCM7+Kernel/XDAPremium
domics said:
Great . I hope you will try again flashing roms!? It is nearly impossible to brick your phone, if you follow the instrucions and always flash the right rom for your phone model.
U20i/nAaCM7+Kernel/XDAPremium
Click to expand...
Click to collapse
guys...can you simple to say how to flashing ROM???i install ROM manager...i want to clear old one Rom right???how can i clear it???you just give me link and list by 1,2,3...thanks
guys, this is my mobile's current specs (also, i have attached a screenshot);
Xperia neo (MT15a)
Android version 2.3.4
Firmware Version 4.0.2.A.0.62
i need to downgrade this to .42 to continue rooting. can somebody give me a link to download ftf file for MT15a??
thanks in advance, really appreciate your help guys.
You can make your own ftf. Repair firmware with update service, then we'll help you with thw next steps.
Via Tapatalk 2.0 on ICS
sdk16420 said:
You can make your own ftf. Repair firmware with update service, then we'll help you with thw next steps.
Click to expand...
Click to collapse
hm.. but update service will give him .62 not .42, right? or are you thinking on making prerooted image? hm now i got idea
@ prazadx: are you willing to do clean flash with pc companion or sony update service, then we'll instruct you how to make .62 .ftf, but it will be around 150MB after you zip it, wich you would need to upload..
then if your phone is sim-lock free your fastboot should be open, and it should accept prerooted .img.
even if your bootloader is locked i think it only matter for kernels.
Someone correct me if I'm wrong
its here mate
Just flash this with flashtool (extract using winzip or eqivalent first to get the ftf), root using flashtool, update OTR, install cmw and you are fine.
gregbradley said:
its here mate
Just flash this with flashtool (extract using winzip or eqivalent first to get the ftf), root using flashtool, update OTR, install cmw and you are fine.
Click to expand...
Click to collapse
hm, will i version work with no problem on a phone? don't know anyone who tried it so I'm asking
Madfysh said:
hm, will i version work with no problem on a phone? don't know anyone who tried it so I'm asking
Click to expand...
Click to collapse
me, it works for me.
I play with my phone a lot and mess with it loads
When i want to go back to a clean instal i flash that, root, update and update.
Not sure why you are making an issue about this, its the .ftf i got from this forum on how to root the neo...
gregbradley said:
me, it works for me.
I play with my phone a lot and mess with it loads
When i want to go back to a clean instal i flash that, root, update and update.
Not sure why you are making an issue about this, its the .ftf i got from this forum on how to root the neo...
Click to expand...
Click to collapse
sorry, I think you missunderstood me.
will mt15i ftf work ok on mt15a phone?
Madfysh said:
sorry, I think you missunderstood me.
will mt15i ftf work ok on mt15a phone?
Click to expand...
Click to collapse
i see your point....but i dont see why not...
try it and see is my advice..
please report back
EDIT:
And if it doesnt surely a quick edit in the build.prop will sort,,,,,
gregbradley said:
i see your point....but i dont see why not...
try it and see is my advice..
please report back
EDIT:
And if it doesnt surely a quick edit in the build.prop will sort,,,,,
Click to expand...
Click to collapse
thanks guys.
also, what is the quick edit (in the build.prop) you told? how to do that?
Madfysh said:
@ prazadx: are you willing to do clean flash with pc companion or sony update service, then we'll instruct you how to make .62 .ftf, but it will be around 150MB after you zip it, wich you would need to upload..
then if your phone is sim-lock free your fastboot should be open, and it should accept prerooted .img.
even if your bootloader is locked i think it only matter for kernels.
Someone correct me if I'm wrong
Click to expand...
Click to collapse
I'm gonna perform this flashing with flashtool. all i need is to downgrade my current firmware to .42, so that i can root my device. also this is a sim lock free device with a locked bootloader.
is there any other way to root without downgrading??
also, thanks mate..
There are another way to root but you need to unlock your bootloader, sorry I cant put links,but if you search right here in this Forum "unlock bootloader" you would see the options to do that.
Definitly this way is the only you have without unlockink bl. Thats all the peoplo say because I cant flash .42 on mine....flashtool stop always before 100% I will format pc...i dont know what other thing can be.
Any suggestion??
Sent from my MT15i using XDA
gregbradley said:
i see your point....but i dont see why not...
try it and see is my advice..
please report back
EDIT:
And if it doesnt surely a quick edit in the build.prop will sort,,,,,
Click to expand...
Click to collapse
thanks mate, it worked without any mod. also, i did rooted my neo thanks to all of you.. thanks again...
as the title said~ and please someone....
tell me what is bootloader,and other's....
please someone tell me guide to root and maybe upgrading my android to 4.0...
my build number 4.0.2.A.0.62...
what i have to do to root~ from A to Z~ please help me...
my android 2.3.4....
someone please.... i've been trying all sort of guide and end up doing nothing ~_~
and please tell me how to backup my item from my phone to pc or internet or something....
i want to root so badly....
Hi,dude.
I think you haven't done enough search here on XDA,though there are really too many information to absorb all at once.
There is a great guy,akshay13071990,posting a Guide and I truly recommend you to take a look.:good:
As for rooting your phone on firmware .62,you have to flash back to firmware .42 or .56,and root it ,then update to .62 again.
It's kind of vexing.But if you want to have a rooted phone on .62(Gingerbread),that's it.
Or if you haven't unlocked your bootloader,maybe you could update to Sony's official ICS via PCC.
Good luck.
---------- Post added at 11:33 PM ---------- Previous post was at 11:28 PM ----------
Sorry I forgot to mention that if you have unlocked the bootloader,do not update your phone via official ways such as PCC or OTA.
Because it may brick your phone.
4.0.4 ics cant be rooted directly in locked bootloaderso follow this method to update and root 4.0.4 ics
---------- Post added at 08:47 PM ---------- Previous post was at 08:46 PM ----------
http://forum.xda-developers.com/showthread.php?t=1709880
Mior Aiman said:
as the title said~ and please someone....
tell me what is bootloader,and other's....
please someone tell me guide to root and maybe upgrading my android to 4.0...
my build number 4.0.2.A.0.62...
what i have to do to root~ from A to Z~ please help me...
my android 2.3.4....
someone please.... i've been trying all sort of guide and end up doing nothing ~_~
and please tell me how to backup my item from my phone to pc or internet or something....
i want to root so badly....
Click to expand...
Click to collapse
Look at my signature, I have a guide explaining a lot of things, including rooting.
not that i didnt search for it....its been one month now that i search....
and i want to try it~
just a few question~ if i do degrade the firmware or i do root it....do i need to backup my files before i do it ???
or the files isnt effect at all ??? i mean auto delete or something....
and some other question....i know im a noob since i cant even understand how to configurate all the guide that have been post... :crying:
Mior Aiman said:
not that i didnt search for it....its been one month now that i search....
and i want to try it~
just a few question~ if i do degrade the firmware or i do root it....do i need to backup my files before i do it ???
or the files isnt effect at all ??? i mean auto delete or something....
and some other question....i know im a noob since i cant even understand how to configurate all the guide that have been post... :crying:
Click to expand...
Click to collapse
If you flash firmware, you loose all data, except sdcard. If you're just rooting though, you loose no data.
iONEx said:
If you flash firmware, you loose all data, except sdcard. If you're just rooting though, you loose no data.
Click to expand...
Click to collapse
if i do need to downgrade my build number~ that's mean i need to flash right ? my build number as stated above is 0.62... i need to flash right ?
Mior Aiman said:
if i do need to downgrade my build number~ that's mean i need to flash right ? my build number as stated above is 0.62... i need to flash right ?
Click to expand...
Click to collapse
yes.
If you need help go to my guide. You also have a sticky guide here at XDA
iONEx said:
If you flash firmware, you loose all data, except sdcard. If you're just rooting though, you loose no data.
Click to expand...
Click to collapse
iONEx said:
yes.
If you need help go to my guide. You also have a sticky guide here at XDA
Click to expand...
Click to collapse
and when i do off my phone to flash~ what's the key i need to press while turn on ??? Xperia Mini Pro....
Mior Aiman said:
and when i do off my phone to flash~ what's the key i need to press while turn on ??? Xperia Mini Pro....
Click to expand...
Click to collapse
That's why you need to read the guide. It is explained there -.-
anyway:
Flashing firmwares with flashtool:
Install FlashTool.
Go to your flashtool folder, and place the .ftf file in the folder "firmwares".
Turn off your phone.
Now open flashtool.exe> click the thunder icon> select flashmode> adsp.sin should be selected> click ok. Wait till it asks you to connect the phone.
When it does, hold down the -DOWN- volume button while connecting, to enter flashmode (the LED should turn green).
The flashing will commence.
After that, disconnect and turn on your phone.
I believe Flashtool allows you to root the phone without having to unlock your bootloader or flash a separate kernel.
I used this topic to root, it is a little quicker :http://forum.xda-developers.com/showthread.php?t=1701357
iONEx said:
That's why you need to read the guide. It is explained there -.-
anyway:
Flashing firmwares with flashtool:
Install FlashTool.
Go to your flashtool folder, and place the .ftf file in the folder "firmwares".
Turn off your phone.
Now open flashtool.exe> click the thunder icon> select flashmode> adsp.sin should be selected> click ok. Wait till it asks you to connect the phone.
When it does, hold down the -DOWN- volume button while connecting, to enter flashmode (the LED should turn green).
The flashing will commence.
After that, disconnect and turn on your phone.
Click to expand...
Click to collapse
Oo~ okay~ than how does i backup things from my phone memory ? exp phone book,message...etc...
sorry for fuzzing u :crying:
Mior Aiman said:
Oo~ okay~ than how does i backup things from my phone memory ? exp phone book,message...etc...
sorry for fuzzing u :crying:
Click to expand...
Click to collapse
no fuzzing, it's ok
you can use titanium backup for backing up settings, apps and data
iONEx said:
no fuzzing, it's ok
you can use titanium backup for backing up settings, apps and data
Click to expand...
Click to collapse
isnt titanium backup need to pay to use it ?? i mean if i do need to install if FREE...i need to root first right ?? isnt ??
For full features you'll need root. But I think it'll still work without root, though limited.
When rooting, you don't loose data.
iONEx said:
For full features you'll need root. But I think it'll still work without root, though limited.
When rooting, you don't loose data.
Click to expand...
Click to collapse
already tried...but :crying: it said i need to root it my device first :crying::crying::crying::crying::crying::crying::crying:
Hi everyone
I just wanna know if there is anyway to downgrad from ICS to Gingerbread
Please Help
Thanks!
Flash the gb file with Flashtool
Go here http://forum.xda-developers.com/showthread.php?t=1599303 and dowload the ftf firmware of gingerbread, then download flashtool, you can find it here:http://forum.xda-developers.com/showthread.php?t=1588586 then flash the ftf file and you will have gingerbread on your device.
IF THIS WAS HELPFUL PLEASE HIT "THANKS"
Why do you go for GB? Everyone's wining about JB.
Sent from my Xperia P using xda app-developers app
josie87 said:
Why do you go for GB? Everyone's wining about JB.
Sent from my Xperia P using xda app-developers app
Click to expand...
Click to collapse
man actually my friend got sola from used phone market and we dont why its too slow performance so he wont to get back to GB thats it
FerGT said:
Go here http://forum.xda-developers.com/showthread.php?t=1599303 and dowload the ftf firmware of gingerbread, then download flashtool, you can find it here:http://forum.xda-developers.com/showthread.php?t=1588586 then flash the ftf file and you will have gingerbread on your device.
IF THIS WAS HELPFUL PLEASE HIT "THANKS"
Click to expand...
Click to collapse
thanks man but would u mind to provide me with steps how to flash the ftf file ??? and what do you mean by flashinf the ftf file ??
thanks for responding anyway
Wrong section!!!
pipi14 said:
Wrong section!!!
Click to expand...
Click to collapse
??????
ghost_j1 said:
thanks man but would u mind to provide me with steps how to flash the ftf file ??? and what do you mean by flashinf the ftf file ??
thanks for responding anyway
Click to expand...
Click to collapse
To use flashtool, first download the firmware you want, then check usb debugging in your cellphone (settings/development options). Now turn off the cellphone, then open flashtool.exe, put flash and select the firmware you want to flash (with termination ftf) now there will be an advice in the computer screen sayin to conect the phone, conect it by pressing the volume down button until a green light is showed at the notification light part in the cellphone then flashtool will begin to flash the phone and wait it to finish the process. That all I hope it help you, sorry fot my bad english.
IF THIS WAS HELPFUL, PLEASE HIT THANKS
FerGT said:
To use flashtool, first download the firmware you want, then check usb debugging in your cellphone (settings/development options). Now turn off the cellphone, then open flashtool.exe, put flash and select the firmware you want to flash (with termination ftf) now there will be an advice in the computer screen sayin to conect the phone, conect it by pressing the volume down button until a green light is showed at the notification light part in the cellphone then flashtool will begin to flash the phone and wait it to finish the process. That all I hope it help you, sorry fot my bad english.
IF THIS WAS HELPFUL, PLEASE HIT THANKS
Click to expand...
Click to collapse
Thanks alot man and i can understand ur English
I am ganna try it and let u know but i few question still in my mind and hope u have the answers
is that process will give a rooted device or no
and is it an original firmware form sony
after all am I able to get the official updates from Sony
thanks alot and hope it the original firmware and if its not anyway to get it ??
coz my friend get an used phone and his old owner is really miserable man
thanks again :laugh:
Yes it is the original SONY firmware, there wont be any problem receibing the updates
IF THIS WAS HELPFUL, PLEASE HIT THANKS
Why not just roll a factory reset and update the phone via the PC Companion? Should be able to get rid of the crap in the phone as well.
FerGT said:
Yes it is the original SONY firmware, there wont be any problem receibing the updates
IF THIS WAS HELPFUL, PLEASE HIT THANKS
Click to expand...
Click to collapse
Thanks alot man thanks
Snowstormzzz said:
Why not just roll a factory reset and update the phone via the PC Companion? Should be able to get rid of the crap in the phone as well.
Click to expand...
Click to collapse
factory reset will not roll me back from ICS to Gingerbread i though.. am I right ?