My s3 wont connect to wifi.
It stucks on IP check.
The phone is rooted.
What to do ?
Thanks for any advice
Try a different rom or kernel
Sent from a galaxy far far away.
What Rom are you on?
Made hesKdol
I am on stock rom.
Oh god... Questions go in the Q&A forum.
Q&A stands for questions and answers, in case you didn't know
Please read forum rules before posting
Questions go in Q&A
Thread moved
Had a similar problem with my galaxy tab 2 10.1
:crying:
I used a program from the play store - FXR WiFi fix and rescue by Brilliapps
I also changed my router channel to auto.
Good Luck:good:
Mine happened to have issues too. Could be your network provider router settings. Just a quick Google could help you put the right settings
Sent from my GT-I9300 using xda app-developers app
try a different kernel
Related
I was trying to use blueinput but it doesn't work . Can someone point me to a app that would? Im trying to connect to a mini keybored. Please advise. ( phone is rooted ATRIX 4g 2.3.4 (stock )
Sent from my MB860 using Tapatalk
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A
Everybody's work here is terrific! I have a HSPA+ speed question. I've been playing with my phone today, and noticed when I restore my stock backup I get faster speeds. Stock backup I get 5-7meg download, and on unamed, and ICSrewed I get 1-2.5. I checked and the apk settings are the same across the board. Just curious...
are you running the same modem as stock while on one of the custom roms? Different modems work better in different areas.
Btw this belongs in q /a not dev forum.
Sent from my unf#cked att sgs2
I get consistently 5+ in my area
Sent from my SGH-I777 using Tapatalk
canecbr600 said:
Everybody's work here is terrific! I have a HSPA+ speed question. I've been playing with my phone today, and noticed when I restore my stock backup I get faster speeds. Stock backup I get 5-7meg download, and on unamed, and ICSrewed I get 1-2.5. I checked and the apk settings are the same across the board. Just curious...
Click to expand...
Click to collapse
Check ur modem and i know u prob didnt knkw but post in Q/A
Sent from my SGH-I777 using xda premium
You think this has anything to do with development? Did you create anything? No so it belongs in Q&A
Sent from my SGH-I777 using XDA App
Moved. In the future, please do not post questions in the Dev forum, or infractions will be handed out. If you are unsure of where to post, please read the rules of the forum.
Modem=baseband can be found in settings-about phone. First thread in dev section has zips to flash. I flashed mine right over existing rom no wipe and it worked but had to reflash after updating as modem was included in rom. BTW modem=radio also.
Hi all,
My friend bought an Galaxy S3 3 days ago... yesterday, he got an update through the kies (4.1.2 XXELLA). When he tries NFC, it doesn't work. We are taping our phones but they aren't reacting!!!
Is this an firmware issue or hardwere issue?! how can i test the NFC chip like we test other sensors by pressing *#0*# ?!
Regards,
Questions go in the QA section, not general.
Hit "report" on your post and ask for it to be moved
I use nfc all the time. Me and my mate share music etc he has galaxy s3 running lldj4 and im running ell4.. sometimes it will ask to activate sbeam.. think u need to have nfc amd sbeam both swiched on.
Sent from my GT-I9300 using xda app-developers app
darenb4 said:
I use nfc all the time. Me and my mate share music etc he has galaxy s3 running lldj4 and im running ell4.. sometimes it will ask to activate sbeam.. think u need to have nfc amd sbeam both swiched on.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Of course we both had switched on NFC and SBeam
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
My s3 doesn't keep settings after a restart and basically has never been 100% at it. Eg. Ring tones will revert to default, default application settings get forgotten. Phone has been rooted before but actually isn't right now.
Running 4.1.2
I have done a factory data reset.
Any thoughts?
Sent from my GT-I9305 using xda app-developers app
layne said:
My s3 doesn't keep settings after a restart and basically has never been 100% at it. Eg. Ring tones will revert to default, default application settings get forgotten. Phone has been rooted before but actually isn't right now.
Running 4.1.2
I have done a factory data reset.
Any thoughts?
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Thoughts are one post in the correct forum and two return phone to vendor as faulty .
#
Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help & Troubleshooting
jje
Really? The s3 q&a and troubleshooting forum is the wrong forum?
Since the phone has been rooted im hesitant to send it back. Its actually also had the screen replaced.
Still hopeful someone has better advice than tell me im posting in the wrong forum. This place used to be friendlier than this im sure.
Just saw the link for the lte specific forum. Will repost there.
Sent from my GT-I9305 using xda app-developers app
layne said:
Really? The s3 q&a and troubleshooting forum is the wrong forum?
Not if you have I9300 yes its wrong if you have I9305 really .
Btw, what forum would be a better place for me troubleshooting question?
The I9305 forum Q&A logically .
You had two bits of advice ignore them both or not .
jje
Click to expand...
Click to collapse
Thanks for the advice. Already took one of them... other one; not sure how my warranty would hold up with being rooted and a screen replaced... sad face.
Considering a cyanogen or perhaps liquidsmooth rom that I've just seen a bit about.
My concern is that even a new rom doesn't wipe or refresh all the parts where things like default settings might be kept during a restart. So hoping some advice comes through in that regard perhaps.. but not in this forum.
Sent from my Nexus 7 using xda app-developers app
stop spam
Closing this thread as it was posted in the wrong place. The new thread is here in the I9305 Q&A section.
OK, so to start I have read and read and search the forums, but I don't see anyone with these strange symptoms, so here it is...
I have a GT-I9300 running CM 10.2 (4.3.1) here in China, and in my home the signal is terrible, between 0 and 1 bar. I do get data, however it constantly jumps between E and H+, so I decided to give an RIL update a try. I downloaded some RILs and some MODEM+RILs to try experiment with, two which reference China and a UK unbranded one. Flashed all three and always I get the same strange result.
With the original RIL and/or matching or unmatching Baseband, I get 0 to 1 bar and slow data. If I flash ANY of the 3 that I downloaded I get FULL SIGNAL bars, and it's glued to H+ with great data rates. I can make calls just fine, however none of the downloaded RILs allow me to receive calls. I go back to the original setup and my signal drops to nothing, data goes back to slow, but I can send and receive calls.
Ideas?
Thanks in advance.
Wrong section, this is not Q&A. Anyways, flashing ril on cm will break calls or other stuff, since cm is not using a standard implementat of libril. The only thing you can change is the modem.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Exactly. CM uses OpenRIL, so flashing any sammy ril will break it. Download an app called 'perka's file stash' from playstore, there are plenty of modems without ril that you can safely flash. but first, reflash CM to restore normal ril.
. .and then read general > sticky roll-up thread > understanding the basics before rooting. All this and much more is covered
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Moster2 said:
Wrong section, this is not Q&A. Anyways, flashing ril on cm will break calls or other stuff, since cm is not using a standard implementat of libril. The only thing you can change is the modem.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's funny you should say that given the section this thread is in is called "Galaxy S III Q&A, Help & Troubleshooting"
I think it's right there in the middle somewhere...
But I digress. Changed the modem, aside from my phone changing the way it identifies my carrier there seems to be no change. Sometimes the carriers is called China Unicom, sometimes it's called CU-CHN. Odd.
fvultee said:
It's funny you should say that given the section this thread is in is called "Galaxy S III Q&A, Help & Troubleshooting"
I think it's right there in the middle somewhere...
But I digress. Changed the modem, aside from my phone changing the way it identifies my carrier there seems to be no change. Sometimes the carriers is called China Unicom, sometimes it's called CU-CHN. Odd.
Click to expand...
Click to collapse
Your thread was moved. Dont think that you opened in this secton. It was in general before
Sent from my GT-I9300 using XDA Premium 4 mobile app
Moster2 said:
Your thread was moved. Dont think that you opened in this secton. It was in general before
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well I guess someone moved it for me, very nice of whoever that was!
We report threads in the wrong place using the report /!\ button
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit