[Q] My Status bar dissapeared - Galaxy Ace S5830i Q&A, Help & Troubleshooting

Hi all,
I am using Simplicity V4 ROM withn Stock Kernel, I dont like the center clock in the Status bar and tried to flash the patch in order to move the clock right. . . I used the Patch from the MindCr ROM thread. . . Once I flashed the patch, after rebbot.,. My Status bar dissapeared. . .
It throws some error also.. otherwise everything working fine.
Do I need to reflash the ROM again, or is there anyway to replace the Simplicity status bar again from the ROM file?

yes . you must reflash again the rom to get back normal . no need odin , reflash simplycity v4 again :good:

HanLand_Ace"I" said:
yes . you must reflash again the rom to get back normal . no need odin , reflash simplycity v4 again :good:
Click to expand...
Click to collapse
Thanks. it worked

Related

[Q] question about mod-rom compability

hi
i want to do this mod http://forum.xda-developers.com/showthread.php?t=1132721 with the crt effect and the battery percentage on my sgs2.
i have villain 1.4 and wanted to know if this mod is ok to go with my rom??
and also how to install the mod..
i dont want to mess it up and install everything from scratch..
he mod is available in Clockwork mod(flashable through clockwork mod, dont forget to backup), dont forget, its your responsibility when flashing! shocker..
So you flash via CWM same way as you flashed Villain rom .
The man says its for VR 1.4
It also tells you to back up first .
Tested it works on VR 1.4 .
jje
@JJEgan thx for the quick reply..
actually found the effect i wanted on villain tweaks..crt effect and the circle battery with percentage...simple selct and install

[Theme/Rom Kinda] Deodexed CM 7.0.3 with transparent statusbar patch

So what i did was I deodexed the cyanogenmod 7.0.3 Stable Rom(witch is normaly odexed).
For the ones who wanne know what deodexed/odexed is look here (for some a nice thing to know)
Its not that I made a whole new rom here, all credit goes to the cyanogenmod team of course. It just took me some time google-ing how to deodex correctly.
Simply put this allows more theming to be done so you can have a transparent status bar if you use a theme like this and this (these are 2 of many) and apply them with the theme chooser app
Downloads;
CM 7.0.3 Rom Deodexed, you can also extract the deodexed apps and frameworks and replace them in your rom (7.0.3)
Patch, to allow to have the transparent status bar
Undo Patch, if you decide to keep the deodexed rom and want to undo the patch
If you want google apps (market etc.), just flash the gapps found on cyanogenmod site
I recommend you nandroid backup first before you start flashing, as normal wipe factory,... in Clockworkmod
If there are and problems etc, let me know
Awesome, I'll do it during the weekend.
I tried but end up with no status bar. I think it got the whole process right, I wiped factory first, then flashed the rom and then the patch.
Daidoo said:
I tried but end up with no status bar. I think it got the whole process right, I wiped factory first, then flashed the rom and then the patch.
Click to expand...
Click to collapse
hmm strange, didnt happen to me
did you flashed the rom and then directly flashed the patch, or did you booted up the rom first then went to recovery and flashed patch?
if not try flashing rom, boot up rom then flash patch
I got the status bar doing what you said, but transparency doesnt seem to work on my homescreens. I only have transparency when i go into apps, is this how it should work?
use this to setup your background, then you will have homescreen transparent statusbar
Hitmax117 said:
use this to setup your background, then you will have homescreen transparent statusbar
Click to expand...
Click to collapse
Worked perfectly Thanks
Is your patch working on Cyanogen 7.1 RC or should i download your deodexed rom to apply the transparency patch ?
stevenstrike said:
Is your patch working on Cyanogen 7.1 RC or should i download your deodexed rom to apply the transparency patch ?
Click to expand...
Click to collapse
It won't work on the RC. I can give you a patch for nightly 153 if you like (it came out after the RC). I know it's a nightly, but I've been using it with no problems for weeks.
Hi,
Hitmax117, i would like to make a patch for transparent status bar on a already existing custom deodexed XXJVR rom.
do you have any tutorial or a link to provide me?
thx 4 ur help
nogit said:
Hi,
Hitmax117, i would like to make a patch for transparent status bar on a already existing custom deodexed XXJVR rom.
do you have any tutorial or a link to provide me?
thx 4 ur help
Click to expand...
Click to collapse
here you go; http://forum.xda-developers.com/showthread.php?t=1202866&highlight=windows
thx for the link m8 !!
does it work on gingerbread 2.3.4?
Edit: ok i tried it but the result is that it is so transparent that it removes completly the top bar lool!!
undo with the undo.zip file reflashed twice but no way, i will try more
thx a lot
bye
nogit said:
thx for the link m8 !!
does it work on gingerbread 2.3.4?
Edit: ok i tried it but the result is that it is so transparent that it removes completly the top bar lool!!
undo with the undo.zip file reflashed twice but no way, i will try more
thx a lot
bye
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=9978779&postcount=62
It's a good guide for theming a lot of things, making the status bar transparent is one of them

Simple bad issue with my flashed zips !!

Hi !
I've recently disturbed you with my issue of xRecovery uncapability to flash any ZIP
Now , I can say that this issue was totally solved , thank you so much
But , the smile has re-disappeared from my face , because when I flashed the first ZIP "Xperia S music player" the music player disappeared at all !!!!
Secondly , I tried to flash a new status bar , and the status bar disappeared too !!!!
Then I tried to flash an ICS theme , it boots , I could see the new lock screen , but I couldn't use my device , it reboots after every boot :-(
So , what can I do for that sh*t ?? :-S
Thanks in advance
Y U NO answer me pals?? :-D
Thanks for your powerful help !!!
Reason why no one answer you may be because it's a issue not many have had.
You should try to ask in the thread for the statusbar you flashed and the ICS theme.
I think you should flash new ROM if it reboots after every boot.
Sent from my LT26i using xda premium
Thanks a lot sir , and I'm sorry
But you know , I'm a new member , and I don't know exactly where should I ask my question
Sorry again
TeraXimoS said:
Hi !
I've recently disturbed you with my issue of xRecovery uncapability to flash any ZIP
Now , I can say that this issue was totally solved , thank you so much
But , the smile has re-disappeared from my face , because when I flashed the first ZIP "Xperia S music player" the music player disappeared at all !!!!
Secondly , I tried to flash a new status bar , and the status bar disappeared too !!!!
Then I tried to flash an ICS theme , it boots , I could see the new lock screen , but I couldn't use my device , it reboots after every boot :-(
So , what can I do for that sh*t ?? :-S
Thanks in advance
Click to expand...
Click to collapse
Restore your last backup.. That's it..
Sent from my Xperia S using XDA
If u flashed all them u may have screwed the framework-res when I flashed custom notification bar it ruined performance so had to flash back to original version of Rom I was using (championswimmer's x10s rom it was) just flash back to stock and start again pal
Sent from my X10S using XDA
thanx a lot to all, I succeed to flash MIUI ROM, Its working perfectly

[MOD][STOCK JB 4.1.2]OGBatteryMod + Traffic Speed Meter

Hello.. I Just Want to Share This Mod I Hope You Like
Special Thanks To Osama Ghareeb For Battery Mod Tool
And For Dzol Cp For Guide Mod Add Traffic Speed Meter On Statusbar
Features
OGBatteryMod
Traffic Speed Meter
Center Clock
Download
For Stock Rom JB 4.1.2
OGBatteryMod White Signal Icon
OGBatteryMod Fish Bone Signal Icon
OGBatteryMod Transparent
For Custom Rom
OGBattreyMod For Harsh Jelly v3.2
OGBattreyMod For Light JB
Instructions
Don't Forget To Backup SystemUI.apk & SecSettings.apk
Download File flashable zip Select one
Place File flashable zip in The Root of sdcard (ExternalSd)
Reboot into CWM Or TWRP Recovery
Flash File flashable zip and Reboot
If You Want to Change Battery Icon go to settings/display/batteryStyle or Tap Battery Icon 3 Times
If You Want Back To Stock Original File Again Flash This:
Back To Stock Deodexed
Back To Stock Odexed
Amazing work by the developers..and a BIG Thank You for the share....but have a problem though; The center clock and Traffic Speed meter doesn't show at all..I flashed it with TWRP running on Harsh Jelly ROM with S4 theme and Gravity Box....am I doing it wrong ?
arneldna said:
Amazing work by the developers..and a BIG Thank You for the share....but have a problem though; The center clock and Traffic Speed meter doesn't show at all..I flashed it with TWRP running on Harsh Jelly ROM with S4 theme and Gravity Box....am I doing it wrong ?
Click to expand...
Click to collapse
I build this Mod from Bassed stock rom JB 4.1.2 Not from custom rom but if you want i can make for custom rom Harsh Jelly special
abdoel_046 said:
I build this Mod from Bassed stock rom JB 4.1.2 Not from custom rom but if you want i can make for custom rom Harsh Jelly special
Click to expand...
Click to collapse
yes yes .. do it Harsh Jelly . Many will not mind.. If possible, make the clock stood in its place
Goretss said:
yes yes .. do it Harsh Jelly . Many will not mind.. If possible, make the clock stood in its place
Click to expand...
Click to collapse
Done.. you can ceck link in my post
good job
I enjoyed the work, I'm sorry to cm10.2 rom, there's no way to do this mod for cyanogen roms?:good:
lobotwister said:
I enjoyed the work, I'm sorry to cm10.2 rom, there's no way to do this mod for cyanogen roms?:good:
Click to expand...
Click to collapse
CM is already highly customizable.Plus you can use Xposed Framework.
Great mod, but on the LightJB Settings has stopped, when I try get to security settings. Can you make universal mod, which suit to all jb roms?
bjks88 said:
Great mod, but on the LightJB Settings has stopped, when I try get to security settings. Can you make universal mod, which suit to all jb roms?
Click to expand...
Click to collapse
Probably no. Because every ROM has some mods of its own. And when you put stock SystemUI.apk & SecSettings.apk with some other MODs it will make problems. Maybe there is something in your ROM SystemUI.apk & SecSettings.apk that is needed for something other to work normal, and that is not in this. And @abdoel_046 do not know what maker of specific ROM did. Only what he can do is to modify every ROM separatly.
shut_down said:
Probably no. Because every ROM has some mods of its own. And when you put stock SystemUI.apk & SecSettings.apk with some other MODs it will make problems. Maybe there is something in your ROM SystemUI.apk & SecSettings.apk that is needed for something other to work normal, and that is not in this. And @abdoel_046 do not know what maker of specific ROM did. Only what he can do is to modify every ROM separatly.
Click to expand...
Click to collapse
thanks.. :good::good:
and for @bjks88 For Rom Ligh JB Ceck Link In first post
abdoel_046 said:
Done.. you can ceck link in my post
Click to expand...
Click to collapse
Harsh jelly mod still doesn't work...
Sent from my GT-I9070 using Tapatalk
arneldna said:
Harsh jelly mod still doesn't work...
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
please show me your Screenshot again with mod for Harsh jelly'''
abdoel_046 said:
please show me your Screenshot again with mod for Harsh jelly'''
Click to expand...
Click to collapse
Sorry, dont have one now; did a Nandroid Restore will have to flash th MOD again. BTW this is what I did.
Boot to Recovery,(TWRP)
Install 'OGBatteryMod1.0'
Wipe CleanDalvik Cahe/Cache
"For Stock Rom Odexed
Stock Rom Odexed + Fish Bone Signal Icon"
Does this include default signal icon + fish bone, or just a fish bone icon?
jazzh said:
"For Stock Rom Odexed
Stock Rom Odexed + Fish Bone Signal Icon"
Does this include default signal icon + fish bone, or just a fish bone icon?
Click to expand...
Click to collapse
Just Fish Bone Icon Signal bro If you want original icon signal Just flash file "Stock Rom Odexed"
arneldna said:
Sorry, dont have one now; did a Nandroid Restore will have to flash th MOD again. BTW this is what I did.
Boot to Recovery,(TWRP)
Install 'OGBatteryMod1.0'
Wipe CleanDalvik Cahe/Cache
Click to expand...
Click to collapse
or you cant upload to me your systemUI.apk and Secsettings.apk and i make this mod from file you give to me
I don't see status bar at all now
And I can't start settings app.
jazzh said:
I don't see status bar at all now
And I can't start settings app.
Click to expand...
Click to collapse
your rom now is odexed or deodexed?
abdoel_046 said:
your rom now is odexed or deodexed?
Click to expand...
Click to collapse
Odexed.
I also tried with original stock odexed, to revert back, but still the same.
I also tried with mounted system partition first from the twrp. No success.
I'll try to delete cache and dalvik cache in a moment.
jazzh said:
Odexed.
I also tried with original stock odexed, to revert back, but still the same.
I also tried with mounted system partition first from the twrp. No success.
I'll try to delete cache and dalvik cache in a moment.
Click to expand...
Click to collapse
whats code regional country for stock Rom JB you used?

Jiake V6 rom needed please...official or unofficial.

Help please , i have checked on Needrom.com but i cannot see the rom for the V6.....will any other roms be suitable to use on the Jiake V6 ?
justwondering said:
Help please , i have checked on Needrom.com but i cannot see the rom for the V6.....will any other roms be suitable to use on the Jiake V6 ?
Click to expand...
Click to collapse
I very stupidly did not back up the rom , before i started playing with some of the settings....in real need of the rom if possible
justwondering said:
I very stupidly did not back up the rom , before i started playing with some of the settings....in real need of the rom if possible
Click to expand...
Click to collapse
Anyone pleassssssssssssssssssssssse
justwondering said:
Help please , i have checked on Needrom.com but i cannot see the rom for the V6.....will any other roms be suitable to use on the Jiake V6 ?
Click to expand...
Click to collapse
Here try using this ROM avaialble over "http://en.miui.com/thread-29808-1-1.html" see if this helps your out !
promo87 said:
Here try using this ROM avaialble over "http://en.miui.com/thread-29808-1-1.html" see if this helps your out !
Click to expand...
Click to collapse
Hi Thank you , i cannot see my device listed there can you tell me which version of the rom would be best please , i assume i install via CWM?
justwondering said:
Hi Thank you , i cannot see my device listed there can you tell me which version of the rom would be best please , i assume i install via CWM?
Click to expand...
Click to collapse
Hi,
I didn't find any ROM on the net for your phone, but this may be a good news for you! I found a device with same SoC as your device which has MIUI ROM. Here
Here is a guide on how to port it! Try it, it may work. I think it will as porting between 2 same MTK SoC's is really easy!
Cheers!
GeekyDroid said:
Hi,
I didn't find any ROM on the net for your phone, but this may be a good news for you! I found a device with same SoC as your device which has MIUI ROM. Here
Here is a guide on how to port it! Try it, it may work. I think it will as porting between 2 same MTK SoC's is really easy!
Cheers!
Click to expand...
Click to collapse
Thank you i shall take a look , thats brilliant
justwondering said:
Thank you i shall take a look , thats brilliant
Click to expand...
Click to collapse
I was just reading how to port :-
looks like i need the official rom of my phone.....but the big problem is my rom is not working !
http://reviewonanything.blogspot.co.uk/2014/05/ultimate-guide-for-dummies-port-miui.html
justwondering said:
I was just reading how to port :-
looks like i need the official rom of my phone.....but the big problem is my rom is not working !
http://reviewonanything.blogspot.co.uk/2014/05/ultimate-guide-for-dummies-port-miui.html
Click to expand...
Click to collapse
Well, what's wrong with your stock ROM? You can dump the system and/or make a nandroid backup in any custom recovery.
GeekyDroid said:
Well, what's wrong with your stock ROM? You can dump the system and/or make a nandroid backup in any custom recovery.
Click to expand...
Click to collapse
Basically , i was running the standard rom that came with my phone , i changed to NOVA launcher , but the phones normal launcher was still running the background.....so i rooted the phone and froze the original launcher that came with the phone as it was draining the battery.........anyway , i found the phone was running a bit slow , i had installed various apps etc..........Sooooo i thought , just reset the phone .....so because i did not unfreeze the original launcher , when it came to resetting , the phone now has no launcher due to me freezing it !
It looks as if most of the rom is still there as it does load up , it checks for sim cards etc but then stops at that point , even the phone signals come up.
So do you think it is worth using CWM to still back up the rom and use for porting to MIUI Jiake V8 version ?
If so , what command in CWM do i use to make a rom for using in porting .
Thank you for your help.
justwondering said:
Basically , i was running the standard rom that came with my phone , i changed to NOVA launcher , but the phones normal launcher was still running the background.....so i rooted the phone and froze the original launcher that came with the phone as it was draining the battery.........anyway , i found the phone was running a bit slow , i had installed various apps etc..........Sooooo i thought , just reset the phone .....so because i did not unfreeze the original launcher , when it came to resetting , the phone now has no launcher due to me freezing it !
It looks as if most of the rom is still there as it does load up , it checks for sim cards etc but then stops at that point , even the phone signals come up.
So do you think it is worth using CWM to still back up the rom and use for porting to MIUI Jiake V8 version ?
If so , what command in CWM do i use to make a rom for using in porting .
Thank you for your help.
Click to expand...
Click to collapse
Have you enabled USB debugging on your phone? You can simply install apps through ADB, so you can install a launcher through ADB and/or push it to system!
GeekyDroid said:
Have you enabled USB debugging on your phone? You can simply install apps through ADB, so you can install a launcher through ADB and/or push it to system!
Click to expand...
Click to collapse
Hi , i dont think i did , like i say , the phone does not fully boot , because i disabled the original launcher .
so basically , turn phone on , JIake screen , loads , then does not make it to the launcher , it just crashes , so i cannot go into settings etc etc...
justwondering said:
Hi , i dont think i did , like i say , the phone does not fully boot , because i disabled the original launcher .
so basically , turn phone on , JIake screen , loads , then does not make it to the launcher , it just crashes , so i cannot go into settings etc etc...
Click to expand...
Click to collapse
But I think you are able to swipe down the statusbar, right? If not, then make a CWM nandroid backup, convert it into a flashable ZIP and port MIUI.
GeekyDroid said:
But I think you are able to swipe down the statusbar, right? If not, then make a CWM nandroid backup, convert it into a flashable ZIP and port MIUI.
Click to expand...
Click to collapse
In the android recovery (3e) i have the option of Apply update from ADB
i have the following other options
reboot system now
apply update from adb
apply update from sdcard
apply update from cache
wipe data factory reset
wipe cache
backup user data
restore user data
Do i simply backup user data for my rom to port to MIUI ? or is there a simple way using the ADB update ?
With the ADB for the launcher update , how would i do that and how would the system pick up on my choice of launcher ? would i need to edit some lines of code to point towards my choice ?
Thank you for your help.
GeekyDroid said:
Have you enabled USB debugging on your phone? You can simply install apps through ADB, so you can install a launcher through ADB and/or push it to system!
Click to expand...
Click to collapse
Thank you for this , i had not tried to do this , yes i can get into my settings on my phone.... i wiped all the cache etc in the rocovery mode , then rebooted the phone , i then side swiped down to get into my settings.....i set up my google account...but when i load google playstore it just seems to hang...with the loading screen....i can even launch the browser from settings via the Apps setting menu....everything is working...but still no launcher....
i'm still a bit stuck on how to side load something like Nova launcher , so i can get my phone fully funcational again
I had hoped that with been able to set up my google account etc , the google store would of worked , then i could of just downloaded a launcher !
But hey i think i am getting somewhere today with this phone
Oooooooooh wow , thank you for the side swipe idea.....i cleared the data for the googlestore via the app settings , re-ticked the agree to google terms and conditions , then downloaded nova launcher !!!! looks as if things are working a bit better again
Brilliant i have even rebooted the phone and it loads straight to NOVA launcher
Can i still unfreeze the old launcher do you think ?
I would still like to convert to MIUI though
justwondering said:
Oooooooooh wow , thank you for the side swipe idea.....i cleared the data for the googlestore via the app settings , re-ticked the agree to google terms and conditions , then downloaded nova launcher !!!! looks as if things are working a bit better again
Brilliant i have even rebooted the phone and it loads straight to NOVA launcher
Can i still unfreeze the old launcher do you think ?
I would still like to convert to MIUI though
Click to expand...
Click to collapse
Nice to hear, that you got your phone working again!
Well, I would now copy the nova launcher to system/app and give rw-r-r permissions to it, so you won'z get problems again!
GeekyDroid said:
Nice to hear, that you got your phone working again!
Well, I would now copy the nova launcher to system/app and give rw-r-r permissions to it, so you won'z get problems again!
Click to expand...
Click to collapse
Brilliant , so if i do that , even if i do a full reset will it use nova launcher as my main launcher ?
Which option in my recovery options do i use to make a rom , so i can port to MIUI ?
Thank you every so much
justwondering said:
Brilliant , so if i do that , even if i do a full reset will it use nova launcher as my main launcher ?
Which option in my recovery options do i use to make a rom , so i can port to MIUI ?
Thank you every so much
Click to expand...
Click to collapse
Yes, you can. Well, If you don't have an actual stock ROM then it's not that easy to port it. As you have to make a nandroid backup, then convert it into flashable ZIP. But you actually need to set the right mount points for your device in the updater-script. And I don't know how to find that out. So I would be statisfied with stock ROM! :angel:

Categories

Resources