Hi, Hope i am in the correct forum,
i am using galaxy s2 i9100 and was running stock ICS rom+kernal, singapore ROM. No flashing was done, other than official OTA updates
I have encountered a rather strange problem. My phone was acting a bit strange before i did anything (Fast battery drains) , so i did a factory reset as recommended by samsung.
It seemed to solved the issue, then i decided to enable force GPU in developer options, and then my phone started acting up. It would not want to shut down (the lights of the keypad wont go off), and now it wont want to turn on
I have tried reinserting battery, letting it charge, but all i got was the camera part of the phone getting hot. Nothing else, no display, nothing
I cant even enter recovery/download mode (accessed by reinsert battery + Hold Vol buttons+Home + power button right?)
What can i do to resolve this? Strangely enough, I am running totally stock ROM and Kernal. I have no knowledge on how to use odin and all. I have no more warranty, so i can only ask for your help. Any help would be really appreciated
arn.yong said:
Hi, Hope i am in the correct forum,
i am using galaxy s2 i9100 and was running stock ICS rom+kernal, singapore ROM. No flashing was done, other than official OTA updates
I have encountered a rather strange problem. My phone was acting a bit strange before i did anything (Fast battery drains) , so i did a factory reset as recommended by samsung.
It seemed to solved the issue, then i decided to enable force GPU in developer options, and then my phone started acting up. It would not want to shut down (the lights of the keypad wont go off), and now it wont want to turn on
I have tried reinserting battery, letting it charge, but all i got was the camera part of the phone getting hot. Nothing else, no display, nothing
I cant even enter recovery/download mode (accessed by reinsert battery + Hold Vol buttons+Home + power button right?)
What can i do to resolve this? Strangely enough, I am running totally stock ROM and Kernal. I have no knowledge on how to use odin and all. I have no more warranty, so i can only ask for your help. Any help would be really appreciated
Click to expand...
Click to collapse
which Stock ICS rom u ver into was it 4.0.4?
Have you tried with a different battery? Maybe your battery is damaged.
Usb jig▶jtag▶motherboard.
Hope its the 1st one.
{go back to your iphone since you are an android noob}
Sun90 said:
which Stock ICS rom u ver into was it 4.0.4?
Click to expand...
Click to collapse
Thanks for the reply
Yes, I was on Stock ICS 4.0.4, updated somewhere in november last year
agonn said:
Have you tried with a different battery? Maybe your battery is damaged.
Click to expand...
Click to collapse
Yes, I have tried with the original samsung battery and the samsung extended battery
theunderling said:
Usb jig▶jtag▶motherboard.
Hope its the 1st one.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
Where can i find a USB jig? Might be worth a shot
And personally i hate all apple products, and i never use their products before
I have been using android for nearly 2 years, except that i never dared to delve into root/flash as i did not want to void warranties.
There's a thread in General where people offer to lend their jigs to other people. Check; there might be someone near you who can help. Alternatively, search eBay (and probably elsewhere online) "Samsung Galaxy S2 jig". Costs a few dollars.
Re: the Apple thing, it's his sig. He didn't post "go back to your iPhone since you are an Android n00b".
arn.yong said:
Where can i find a USB jig? Might be worth a shot
And personally i hate all apple products, and i never use their products before
I have been using android for nearly 2 years, except that i never dared to delve into root/flash as i did not want to void warranties.
Click to expand...
Click to collapse
MistahBungle said:
There's a thread in General where people offer to lend their jigs to other people. Check; there might be someone near you who can help. Alternatively, search eBay (and probably elsewhere online) "Samsung Galaxy S2 jig". Costs a few dollars.
Re: the Apple thing, it's his sig. He didn't post "go back to your iPhone since you are an Android n00b".
Click to expand...
Click to collapse
Oh i see, i didnt know it was his sig...oops
Ok, I'll see if i can find/get my hands on a jig somewhere around...Just hoping to bring this expensive brick back to life....somehow
Actually, now that I look at it. I'm not sure it is his sig, per se. It seems to be a standard line he ads to his posts. Perhaps TheUnderling can clarify ?
Good luck. If the jig is no go, given your warranty isn't good, look for JTAG repairers. Do a Google search, or look here, or ask local mobile repair shops. If it ends up not being JTAG'able, as TheUnderling mentioned, you'll need a motherboard replacement. If you get to that point, you can either source one from a 'donor' phone (broken screen or whatever; search eBay), or you can pay Samsung/authorised repairer to replace it.
arn.yong said:
Oh i see, i didnt know it was his sig...oops
Ok, I'll see if i can find/get my hands on a jig somewhere around...Just hoping to bring this expensive brick back to life....somehow
Click to expand...
Click to collapse
Hey T, I told you it was my new sig.
I may have to remove it as its getting too much attention
{go back to your iphone since you are an android noob}
Looks like you've caught a few already
theunderling said:
Hey T, I told you it was my new sig.
I may have to remove it as its getting too much attention
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
Related
Hi,
I read and followed lots of excellent threads on here and successfully rooted my S2. I then flashed it with the Revolution ROM which worked fine, later tried the VK + Siyah which also ran fine.
Today I decided to try WajkIUI but after flashing and rebooting, the phone reset, the button lights came on and then it hung. Now I can't get a thing out of it, no booting, no recovery mode and no sign of it in ODIN.
It sounds completely hard-bricked but I don't really understand how it can be.
Any ideas?
Have tried soft and hard resetting but nothing.
Cheers
Without recovery mode your last best (remote) chance before you send it to Samsung would be a jig.
That's what I was thinking but why would it hard brick if the flash had worked?
And if I send if back to Samsung the warranty will be void anyway won't it?
Unfortunately that one's like asking how long a piece of string is (in other words, who knows ?). If it's a case of the NAND being stuffed as a result of the flash, a JTAG repair may fix it, but you won't know that until/unless you send it to a JTAG repairer.
It may be a hardware issue, cpu might have carked it or something.
Yeah, you've pretty much voided the warranty by putting non-stock firmware on it, but at the end of the day if Samsung can't tell it's been messed with you might get away with a warranty repair/replacement.
You'll only know that if you send it in to them to be looked at. So I guess you've got two choices to consider (not including the remote chance of the jig getting you into download mode).
I guess you could try another battery. Always the possibility it might have died.
Crap. Well, I'll give a jig a go and if that doesn't work then send it back and see what happens.
@ op
did you tried the key press combination to get into download mode? the things you have done has a very less possibility of hard brick.
That's what I thought, but no combination seems to work.
Was the battery full when you flashed?
Sent from my GT-I9100 using Tapatalk
Think it was about 96%.
You never know, it might just be a completely knackered battery. If you're planning on getting it fixed come what may, spending 20 bucks or whatever they cost in your country on another battery won't be the waste of money you might initially think.
If it doesn't fix this problem, at least you'll have a 2nd battery when you do get it fixed. I know I've found having a 2nd battery a godsend since I got mine a month ago, has come in really handy on trips where I've been away for more than a day and has meant I haven't had to worry bout bringing a charger along.
Could a battery just die like that? Seems a bit of coincidence.
Dunno. Anything's possible I guess. Yeah you're right, that would be coincidence. Given what you were doing when it died, I'm betting the NAND is shot & it will need to be JTAG'd either by Samsung or someone else.
mraquinn said:
Could a battery just die like that? Seems a bit of coincidence.
Click to expand...
Click to collapse
Which sucks. That said, according to a site in the UK it costs about £8 plus postage. Have ordered a USB jig just in case, and for £3 it's worth a go.
The really annoying thing is whether to root again if/when I do get it sorted. Am also checking with my network, see if they'll have a go under warranty and I'll forget to mention I was rooting it.
MistahBungle said:
Dunno. Anything's possible I guess. Yeah you're right, that would be coincidence. Given what you were doing when it died, I'm betting the NAND is shot & it will need to be JTAG'd either by Samsung or someone else.
Click to expand...
Click to collapse
On that note....if I wanted to upgrade to ICS, how would that be done without rooting - ie. would the counter look the same? (Long shot)
Yeah if you're going to get it fixed, chances are you'll end up flashing/rooting it again, so the jig will come in handy.
I guess that's something you'll need to decide when you get it back/get a new one. What happened to you isn't the norm tho. The large majority of flashes go smoothly for most people. But the reality is, every time you do it, you do run that small risk of it barfing for any number of a gazillion reasons (which are normally impossible to discover once it's happened). That's the risk people like us who frequent sites like this take.
Yeah if they/Samsung can't tell what happened to it, you'll possibly get away with it. And the fact you rooted it isn't information you have to volunteer to them by any means As to exactly what you should tell them, that's up to you.
Edit to add - Let us know how you get on once you have it sorted. Always useful to have people's experiences on here to give other people it happens to some kind of idea of how it might go down.
mraquinn said:
Which sucks. That said, according to a site in the UK it costs about £8 plus postage. Have ordered a USB jig just in case, and for £3 it's worth a go.
The really annoying thing is whether to root again if/when I do get it sorted. Am also checking with my network, see if they'll have a go under warranty and I'll forget to mention I was rooting it.
Click to expand...
Click to collapse
Well, according to the boffins online I have to go into a store to see if they can repair it. Hopefully they won't be able to check whether it's been rooted or not instore. In fact, if they can't power it on, I don't see how they could.
Random technical question: how can a software/firmware fault stop the hardware from even starting?
My only reference is building a PC - even if you knacker the BIOS and the harddrive, it will still power on so you can access them to put them right.
mraquinn said:
Random technical question: how can a software/firmware fault stop the hardware from even starting?
My only reference is building a PC - even if you knacker the BIOS and the harddrive, it will still power on so you can access them to put them right.
Click to expand...
Click to collapse
Firmware includes the boot sequence and recovery sequence on Android .
power goes to boot on file in effect
Or key combination goes to load recovery or download .
jje
Is that a bit of a flaw, for circumstances just like this?
And, does this mean that the USB jig has no chance of working - or is that the exact reason it might work?
JJEgan said:
Firmware includes the boot sequence and recovery sequence on Android .
power goes to boot on file in effect
Or key combination goes to load recovery or download .
jje
Click to expand...
Click to collapse
i thing jig can solve the problem
Bought one, but have to wait till it ships, so figured I would ask if anybody in the 757 has a mini-usb jig that I could use to get my Note into download mode. Send PM if you do.
Thanks in advance.
U can reboot into download thru recovery
Sent from my SAMSUNG-SGH-I717 using xda premium
mrstone77 said:
U can reboot into download thru recovery
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Walk me through that one, no response to anything, power and up volume results in nothing. Plugging into usb results in nothing Windows, ODIN nor Kies registers it.
vanemburghj said:
Bought one, but have to wait till it ships, so figured I would ask if anybody in the 757 has a mini-usb jig that I could use to get my Note into download mode. Send PM if you do.
Thanks in advance.
Click to expand...
Click to collapse
I think this is what you're looking for, yes?
http://galaxys2root.com/tag/diy-usb-jig/
Sidenote:
I thought it was "down volume button + power " to get into ODIN mode for Samsung devices
up+ down is for recovery
Shirokishi said:
I think this is what you're looking for, yes?
http://galaxys2root.com/tag/diy-usb-jig/
Sidenote:
I thought it was "down volume button + power " to get into ODIN mode for Samsung devices
up+ down is for recovery
Click to expand...
Click to collapse
That is what I ordered, either way on the buttons, phone is bricked to point will take very special sauce to fix it.
Oh... I didn't know all of that... When my phone freezes I can hold the power button for 10 seconds n it'll reboot but u r n need of special sauce... I'm n the 540 sorry
Sent from my SAMSUNG-SGH-I717 using xda premium
mrstone77 said:
Oh... I didn't know all of that... When my phone freezes I can hold the power button for 10 seconds n it'll reboot but u r n need of special sauce... I'm n the 540 sorry
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Yep am with you on that one, I have soft bricked before, but nothing like this, my very first true brick of my cell. Hopefully Jig I ordered at least gets me into download mode, where I can fix it.
vanemburghj said:
Yep am with you on that one, I have soft bricked before, but nothing like this, my very first true brick of my cell. Hopefully Jig I ordered at least gets me into download mode, where I can fix it.
Click to expand...
Click to collapse
If you can see the samsung bootloader then yeah there's hope otherwise you're gonna need the $100 fix for it.
But at least people are responding, I got no love on my end, lol
keeping things in perspective, as I posted before, I have never seen anyone report that a jig does any good on this phone..
You would be better off either using JTAG, or calling Samsung, and playing stupid, and tell them it died after you did an update that the phone requested..they will send you a replacement, with no questions asked.
go through the general and q&a sections; you will see that a jig doesn't do anything for this phone..
wase4711 said:
keeping things in perspective, as I posted before, I have never seen anyone report that a jig does any good on this phone..
You would be better off either using JTAG, or calling Samsung, and playing stupid, and tell them it died after you did an update that the phone requested..they will send you a replacement, with no questions asked.
go through the general and q&a sections; you will see that a jig doesn't do anything for this phone..
Click to expand...
Click to collapse
Well smokestack76 told you differently yesterday. He said over 20 times with a jig. Plus for $1.60 I will give it a try.
yes, for the price, if it makes you feel better, try it..
and, if you believe him, when you can find 20 others that said it did absolutely nothing, then that's your choice.
the sooner you send it in to Samsung, the sooner you will have a working phone..
If Samsung is wiling to send you a loaner phone while you're under warranty i can't see why you wouldnt do that.
I know Nintendo is awesome like that but apparently Samsung reps are quite jaded when you do something silly like ask an honest question.
I wish Samsung would honor warranty services if the device hasn't been on the market longer than year.
I'm A. Maybe he Made a mistake and wants to own up for it insted of weasling into a fraudulent phone.
B. I would be a little jaded as well when I get people calling me all day that have messed up their own phone and are now trying to steal from me.
C. Samsung does honor warranties a year after the device has been on market. YOUR WARRANTY DOES NOT GO INTO EFFECT UNTIL THE ORIGINAL DATE OF PURCHASE. not when the first one of its kind rolls off the assembly line.
Also, wase a jig does work of you are not actually bricked, if you were to be soft bricked the jig would force download mode. I had a captivate I built a jig for, first thing I did was try it on my note. Bam, download mode.
And finally op it's a micro usb jig not mini. Mini is bigger than micro
yeah bro, I know a jig works for SOME phones; it helped me bring my S2 back to life..
However, I have read many many reports of it doing nothing for the Note, so that was why I said what I did..
Plus, people are using the term "Bricked" around here in so many ways, that its hard to know what they mean when they say it..to me, a bricked phone is DEAD, and nothing but an expensive paperweight.....
I can take a video of my note going from off to download mode with nothing but my jig. However the same jig that works on both my phones is out of resistance tolerance on my brothers sgs2.
And yes bricked is used much too often,it is a term to describe when your phone is inert, has no pliability and just sits there, like the baked red clay building material it was named for.
was curious to see if the OP had any luck with the jig....
Well the jig did nothing for me. I suggest send your phone to mobiletechvideos.com for repair, he goes through the JTAG recovery method, and he also unlocked mine... he did a great job. I bricked my Note flashing a ROM for another device by mistake, could not use the jig for anything, so had it repaired. Feeling really happy now... hope this helps.
the jig isn't and was never meant to fix a hard brick...
[history lesson]
Back on captivate, certain bootloaders would disable the button combos for download and recovery, making a simple (I hate the term... But) soft brick into a much stickier situation, so it was discovered that using 300k ohms of resistance across certain pins on the usb port from a powered off state would trigger download mode in seconds, making you then able to simply odin a stock rom and try again.
It was later discovered that the jig had the same effect on the sgs2 with the added benefit of restting the flash counter.
[/history lesson]
If you flash a firmware for the international note on an i717 you will need jtag because you are indeed bricked of the hard variety.
wase4711 said:
was curious to see if the OP had any luck with the jig....
Click to expand...
Click to collapse
Nope gig still in the mail, however took Note to ATT Device Service Center and they told me mother board failure and replaced it. So might not have been related to flashing, inspection seem pretty in depth, removed back cover, using multi meter type of tool and said mother board didn't provide correct response to input. My mandatory 10 days to return no functioning unit is 17 Dec so don't think will have chance to try the jig before I send it back or be charged $549 for non-functioning unit.
vanemburghj said:
Nope gig still in the mail, however took Note to ATT Device Service Center and they told me mother board failure and replaced it. So might not have been related to flashing, inspection seem pretty in depth, removed back cover, using multi meter type of tool and said mother board didn't provide correct response to input. My mandatory 10 days to return no functioning unit is 17 Dec so don't think will have chance to try the jig before I send it back or be charged $549 for non-functioning unit.
Click to expand...
Click to collapse
might as well keep the jig for the couple of bucks it cost..plus, even if it doesn't work for this phone, it might work for your next one!
Hi Team,
Last night my phone battery level was at 10% and i plugged it into the wall charger. it was working (am sure abt that) and i checked few mail, FB etc and went to sleep.
today morning, i when i checked the phone, it was shwoing the boot screen where its showing GT-1900 (in white font) and when i pressed the home button, it went away.
then, i tried to boot my phone, but it was not booting...i kept in the charger for another 2 hours, nothing worked. i placed a new battery, still the phone didnt come up...i kept the phone for 5-6 hours idle by removing battery, sim, sd card and tried again , no joy.
i tried the three button combination to get it into the download mode or recovery mode, that also not working....
but when charging, the phone is hot as normal...
any idea what could be the case?...anyway i ordered a USB jig from ebay....
my phone is JB and its international version...not rooted, no custom ROMs etc..
any help is much appreciated.
Strange!
Let's what a Jig can do then..
Does it heat up around the camera when charging?
"To err is human, to forgive is divine"
Sent from my SGS II
You're gonna need some help for this, so go get a friend, gf, parent, brother, sister or whoever.
Take the battery out, press the download combo, tell your helper to insert the battery back. See if you can get to DL mode.
At least you'll get something to try till the jig arrives.
Sent from the little guy
Now that's really strange....I've never heard about anything like this.Do you have your warranty?Because if it's stock,they will repair it.
Yes, its hot near the camera area....am expecting my jig to arrive sometime tomorrow.....
GamingDj said:
Now that's really strange....I've never heard about anything like this.Do you have your warranty?Because if it's stock,they will repair it.
Click to expand...
Click to collapse
No, i am out of warranty.....
smilingcruel said:
No, i am out of warranty.....
Click to expand...
Click to collapse
Then you'll have to wait for your jig to arrive.If that doesn't work either,then you will have to try a JTAG.
Jtagging is unlikely to work, all of this suggests faulty hardware.
But hey, the OP's got nothing to lose.
Sent from the little guy
gastonw said:
Jtagging is unlikely to work, all of this suggests faulty hardware.
But hey, the OP's got nothing to lose.
Sent from the little guy
Click to expand...
Click to collapse
Oh no..dont say that...SGS2 is my life...it was difficult for me to buy that phone back in 2011, i saved every month like 3-4 months to buy that...
anyway, i am hoping that jig will save my sweetie....(also am praying to god also)....hope for the best.....
also i saved few bucks for buying a S4 also and one mobile shop agreed to take it for $120 ... is that a fair enough price for my SGS2???
I'd pay up to $200 and I'd never sell it.
So I guess you could fight $150.
First off, get it to work again, otherwise you would be selling a donor phone.
Sent from the little guy
Ok....so from what I've read, you have no recovery and no download modes?.....
When you plug the charger in, do you get the "battery charging" indicator on the screen?
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
keithross39 said:
Ok....so from what I've read, you have no recovery and no download modes?.....
When you plug the charger in, do you get the "battery charging" indicator on the screen?
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
Click to expand...
Click to collapse
No, am not seeing anything...
today i got my usb jig and that also didnt worked...
but when i plug in the charger, the area around the camera is hot as usual.....
is my motherboard gone? i tried different options but nothing worked....
No recovery
No download
No battery indication when plugged in......
From what I've read in other parts of this forum, I'm sorry to say that it appears that your phone is about as dead as it's possible to get.....
What country do you live in?....
In the EU, we get a 2 year warranty from Samsung....I'd explore that route first.....
If you don't get anywhere that way, then the last three options are.....
1) JTAG
2) Replace parts with a donor phone
3) Buy a new phone
Option one....probably won't work
Option two....feasible....if you're confident with that sort of work....and a damn site cheaper than option three.........
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
smilingcruel said:
Yes, its hot near the camera area....am expecting my jig to arrive sometime tomorrow.....
Click to expand...
Click to collapse
Yes I believe that's the problem of the new update. I updated my galaxy s2 to official jelly bean, I was having tons of problems. When I connected the charger for charging, it was actually discharging and the phone would get heated up very much. The reason being is when I bought the phone I had 2.3.4 then updated to 2.3.6 then 4 then 4.1. In official updates we don't clear caches which may lead to such problems. That's when I decided to root my phone. I am using custom rom now.
I recommend you to take your phone to samsung care rather than doing anything on your own. If you're not on warranty they will charge you few bucks for the repair. More importantly you will get to know about the problem. If the problem is with the hardware, you can't do anything by yourself, that's why I recommend you to go to samsung care. When you get it repaired, root it and have your custom rom installed. You won't regret. Hope I was helpful.
Sent from my GT-I9100 using xda app-developers app
There's nothing wrong with upgrading to JB, if you look closely you'll see that we (people who know at least a little of how our device works) never experience any of all these issues users keep posting.
They'd always keep some info to themselves and that info is always a f*#k up.
Sent from the little guy
Hi
I recently bought a broken Galaxy S2 with a non-working display/screen off a swiss auction portal (smiliar to eBay) for very little money.
The seller stated that the display broke after he dropped it, the rest of the phone should be fine. Effectively, only the LCD is broken, the glass is intact, but the screen doesn't show anything when I try to turn on the phone.
The first few times I tried to turn on the phone, nothing happened, no boot sound or touch buttons glowing. After trying several combinations of pressing buttons (hard reset, soft reset, download mode, recovery etc.) I heard the boot sound and saw the buttons glowing, but only once and I dont know how I exactly managed it to start. But, nevertheless, I can't really see what the phone is doing, if it is booting, if its in download mode, etc.
Does anyone have an idea, what I can/should do to make sure, the phone itself is working and its only the display which is broken? I just don't want to spend over $100 for a new display, if im not sure if the rest works...any suggestions?
Thanks very much for your help guys!
Greetings from Switzerland!
nkb88
How can anyone answer if the phone is going to be worth the cost of a new screen.It could be water damaged or blacklisted,or faulty.
Did you not foresee these things.What did you expect to happen.You must have trusted the seller,but all of a sudden you have doubts.Why didnt the seller replace the screen.
You probably think youve scored,when in fact it could work out more expensive than buying a working phone.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
How can anyone answer if the phone is going to be worth the cost of a new screen.It could be water damaged or blacklisted,or faulty.
Did you not foresee these things.What did you expect to happen.You must have trusted the seller,but all of a sudden you have doubts.Why didnt the seller replace the screen.
You probably think youve scored,when in fact it could work out more expensive than buying a working phone.
Click to expand...
Click to collapse
First of all, the mentioned auction platform is very small and not quite comparable to eBay, maybe it was my fault to make the comparison to eBay. Its much smaller, only people from Switzerland and people much trustworthier than on eBay. I talked to the seller even before I commited my bid on the phone, and he told me he already bought another one and the place, where he first wanted to repair it, told him, it would be more than $200, which wasnt an option for him...
The phone was very cheap, only about $25 - due to the fact that the sellar put it in a wrong category (mobile accessoires but not mobile devices itself) so almost nobody beside me bidded for the auction. There are several other Galaxy S2s with broken displays for sale, which sell at least for $50-70, rather between $100-150.
So to put it straight: I just bid for the phone because its cheap and, if the display is replaced and the phone is fully working again, the potential selling price is much higher than what I payed for the phone and the display together.
Now, I was just wondering, if there is a possibility to tell, if the phone boots normally and to be sure that the display is the only faulty part...
If you know what network it's on, and you can find a way to get it switched on, you can put a compatible sim card into it and call it....if the phone rings (provided the volume is set right) you can assume it's good.........
That is.....assuming there's charge in the battery.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Ok I see now.
All you need to do then is to relist the phone on that auction site you said....in the proper area/listing....and you could make a profit without risk.
You could put it in dl mode and see if it is ready to take a flash.Or see if someone could hook up a screen to test,or see if you can borrow one/get sale or return.
And people on here help with tech problems,not get rich quick schemes......LOL
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
Ok I see now.
All you need to do then is to relist the phone on that auction site you said....in the proper area/listing....and you could make a profit without risk.
You could put it in dl mode and see if it is ready to take a flash.Or see if someone could hook up a screen to test,or see if you can borrow one/get sale or return.
And people on here help with tech problems,not get rich quick schemes......LOL
Click to expand...
Click to collapse
Actually I could have bought the phone and relisted it in the proper category, you are right on that BUT I acually don't have any interest in making money with this phone, if it is fully working again, I probably will give it to my GF cause her crappy iFone will probalby be moving to the bin soon... You really probably missunderstood me in this case...
But thanks for you help! I'll see this evening if I can put it in download mode...
keithross39 said:
If you know what network it's on, and you can find a way to get it switched on, you can put a compatible sim card into it and call it....if the phone rings (provided the volume is set right) you can assume it's good.........
That is.....assuming there's charge in the battery.......
Click to expand...
Click to collapse
Thats also a good idea BUT afaik you need to enter a PIN code before the phone actually connects to the carrier/provider, isn't that correct?
Not necessarily......unless the phone has been set up that way post purchase.....as I said, you need to know what carrier the phone was with before, and simply go and get a sim card (pay as you go) for that carrier and put it in the phone....job done.
It's not necessary to enter a pin code here in the UK.....I don't know how the mobile operators operare with respect to that in Switzerland though......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
How about if you cant "borrow' a screen,just buy one off eBay from a seller that takes it back with a small restocking fee.
Then hook it up(without fixing it permanently) and see if any problems me/keith mentioned.
Look near the end of this video in this thread.
http://forum.xda-developers.com/showthread.php?p=25438587
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Okay, i managed to connect the phone to my computer and it shows up in KIES! *yay*
Unfortunately, KIES shows: "The connected device is locked..."
But, as far as this looks like, the phone is working! Am I right on this?
I dont know much about kies as I dont use it.Maybe its not an unbranded phone and youve put in a different sim its not used to.
Unless someone has a better idea,I think buying the screen under the conditions I said earlier is the way to go.It may only lose you £15 at the worst.
Check the online imei checket first though to see if it throws amything up.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
I dont know much about kies as I dont use it.Maybe its not an unbranded phone and youve put in a different sim its not used to.
Unless someone has a better idea,I think buying the screen under the conditions I said earlier is the way to go.It may only lose you £15 at the worst.
Check the online imei checket first though to see if it throws amything up.
Click to expand...
Click to collapse
I haven't put in a SIM at all, as it is not neccesary to be able to use the phone.
I will buy a screen anyway, if I can't use it myself, I will give it to a frend who has also got a smashed S2.
Another question: Is it possible to hard reset the phone, without a working screen? Afaik you have to boot into recovery and select the reset from a menu, which is not really possible without having a working display... Any suggestions?
Thanks!
Someone has just posted this utility.
http://forum.xda-developers.com/showthread.php?p=43448133
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
Someone has just posted this utility.
http://forum.xda-developers.com/showthread.php?p=43448133
Click to expand...
Click to collapse
Thanks, but with the phone being locked, i cannot do anything, also not install any apps...
How can I reset the phone without the screen? Or can someone tell me which buttons to press in recovery menu to do a wipe/reset?
Thanks!
That in itself could cause you issues. You have to get the number of and order of presses exactly right otherwise you could end up formatting the system partition (os)
Aaaaand.....you don't know whether you're running 4.0.4 in which case, doing a wipe *may* permanently kill your phone (search emmc brickbug for the why/how)......
Realistically the only option is to obtain a screen......have you thought of taking the phone to an unofficial repairer, explaining the situation and asking for the temporary instore use of a screen? (You could even offer to pay a small fee.....just as a sweetener)
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
nkb88 said:
Thanks, but with the phone being locked, i cannot do anything, also not install any apps...
How can I reset the phone without the screen? Or can someone tell me which buttons to press in recovery menu to do a wipe/reset?
Thanks!
Click to expand...
Click to collapse
That mymobiler didnt look like an app to me.The other thing that was mentioned was an app that needed root.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
keithross39 said:
That in itself could cause you issues. You have to get the number of and order of presses exactly right otherwise you could end up formatting the system partition (os)
Aaaaand.....you don't know whether you're running 4.0.4 in which case, doing a wipe *may* permanently kill your phone (search emmc brickbug for the why/how)......
Realistically the only option is to obtain a screen......have you thought of taking the phone to an unofficial repairer, explaining the situation and asking for the temporary instore use of a screen? (You could even offer to pay a small fee.....just as a sweetener)
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
You are right - thats really too risky. As I said, i'm going to order a screen now and we'll see how things work out! Thanks for your help! I'll keep this thread updated with my progess.
Cheers! :good:
nkb88 said:
You are right - thats really too risky. As I said, i'm going to order a screen now and we'll see how things work out! Thanks for your help! I'll keep this thread updated with my progess.
Cheers! :good:
Click to expand...
Click to collapse
Got a new screen and everything is working smoothly!
Thanks for your support! :good:
PS: Any recommendable, FAST rom without too much bloatware?
Cheerio!
Lol....not gonna recommend a specific ROM as that's against XDAs rules......but if you want the stability of stock without the bloat, try one of the hybrid ROMs. Look for "samsung based" in the ROM sticky thread.....or do what I've done. ....stay with your stock firmware, but root it and debloat it.......
My Wife says I'm a phone geek.....
I'd have to agree.....
I successfully rooted my phone and successfully installed the volume hack package and the battery fox for 4.0.4 (both I found how to do on this website) and for a good few months my phone was working fine on Android 4.0.4
Then one day I was replying to a text message the phone just switched itself off and wouldn't get past the boot screen where it comes up with the Samsung Galaxy S III logo. With no one offering me any help when I've posted about this problem on this site and various others and after searching google for days to find a fix as I am a Mac user (Heimdall) with no access to a PC (Odin) at all, I took it to a local phone shop, explained the problem to see if they'd be able to fix it. They had it for 2 weeks and when I went to collect they told me that the phone ended up having to be sent to Samsung and there was nothing they could do with it. (I figured that anyway as it was rooted). Now I have got the phone back, it's in a worse state than what it was when I took it into the shop. When I try to power on the phone, nothing happens at all, it's just a black screen. I assumed the battery might be flat so when I went to plug in the charger, the battery symbol shows but it's got a circle in the middle of it it as though it's loading but nothing else happens.
Does this mean my phone is completely dead for good with no fix at all?
If it's bin fodder I may as well sell it for parts and try to get a bit of money back out of it as I bought this SIM free and it cost me quite a bit back when it first came out.
I'd appreciate it if I didn't get a load of snotty remarks as though I'm the thickest person on earth! I am fairly new to all this and it's all I ever seem to experience from this website. Please only reply if you have a genuine answer to my problem.
Thank you.
:good:
Are you able to get into recovery?
Sent from my Galaxy Nexus using xda app-developers app
acwalter said:
Are you able to get into recovery?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Hi, no I'm not able to do anything with it.
s1mon87 said:
Hi, no I'm not able to do anything with it.
Click to expand...
Click to collapse
Service centre next .
Your only help from here is charge battery and try usb jig to boot to download mode .
jje
Its SDS. Loads of threads about it. Needs Motherboard replacement from Samsung
rootSU said:
Its SDS. Loads of threads about it. Needs Motherboard replacement from Samsung
Click to expand...
Click to collapse
Thank you for that, I'd never heard the term SDS (Sudden Death Syndrome) before. I didn't even know it existed! But anyway since you mentioned that, I did a search, found this link http://www.freesamsungrepairs.com and I called the number, they reckon they can fix it free of charge providing there's no physical or water damage (which there isn't) and all I have to pay is the postage fees! Sounds like there maybe some hope after all!
s1mon87 said:
Thank you for that, I'd never heard the term SDS (Sudden Death Syndrome) before. I didn't even know it existed! But anyway since you mentioned that, I did a search, found this link http://www.freesamsungrepairs.com and I called the number, they reckon they can fix it free of charge providing there's no physical or water damage (which there isn't) and all I have to pay is the postage fees! Sounds like there maybe some hope after all!
Click to expand...
Click to collapse
Try your carrier / samsung first. It should be covered by warranty.
rootSU said:
Try your carrier / samsung first. It should be covered by warranty.
Click to expand...
Click to collapse
Can people even return a rooted device with SDS?
Prominence19 said:
Can people even return a rooted device with SDS?
Click to expand...
Click to collapse
They can't tell if it doesn't power up.