Related
Hello there!
I have read through all the Boot loop posts before anyone asks!
My phone is stuck on the Samsung galaxy s2 boot up with the yellow triangle and the black "!" inside (Boot loop). This happened after flashing the wrong kernel on the device first time. Here is the thing, no matter how many times I try to flash the Kernel which I think is "KH1" (99% sure) in download mode with Odin and all the right drivers installed right from Kies, it still won't work! I've tried stock kernels, insecure kernels... you name it I've tried it!
The phone it's self will go into DOWNLOAD mode (which works fine) , but not RECOVERY MODE at all!
I have been trying for days to fix it, but nothing on here will work.
Please some one get back to me and try to help me fix this problem as I want to use my galaxy s2 again. :/
Thanks, Sam.
Mortonx said:
I have read through all the Boot loop posts before anyone asks!
Click to expand...
Click to collapse
Really?
[READ THIS] Got a Boot Loop? Don't post a New Thread!.
Emphasis on the latter part.
oinkylicious said:
Really?
[READ THIS] Got a Boot Loop? Don't post a New Thread!.
Emphasis on the latter part.
Click to expand...
Click to collapse
Yes I have! What part of this post are you on about? I couldn't find anything on how to fix what problem I have.
Mortonx said:
What part of this post are you on about?
Click to expand...
Click to collapse
This part:
Don't post a New Thread!
oinkylicious said:
This part:
Don't post a New Thread!
Click to expand...
Click to collapse
A link would be helpful please. It was the only way I can get my question answered. I asked on that post and no reply.
Flash stock and you are done
Sent from my GT-I9100 using XDA App
Mortonx said:
A link would be helpful please. It was the only way I can get my question answered. I asked on that post and no reply.
Click to expand...
Click to collapse
A link to what? Neither in this thread nor your original post in the correct thread have you said what happens when you flash with Odin (what errors, what messages, what options you're picking), what ROMs you've tried (I try to flash the Kernel which I think is "KH1" (99% sure) sounds rather flakey).
The full, detailed instructions are in the very first post, here in case you missed it.
If it doesn't work when you follow the instructions to the letter, explain in full what does happen and someone might be able to help you.
Mortonx said:
I've tried stock kernels, insecure kernels... you name it I've tried it!
Click to expand...
Click to collapse
Any ROMs?
pulser_g2 said:
Alternatively, it is possible to flash VillainROM 1.1 if you are not comfortable in wiping via recovery, or if you cannot do so for any reason (corrupted kernel etc), as it wipes all users data when installing. Simply ignore steps 2 to 4, and flash VillainROM 1.1 via ODIN instead of the stock ROM.
Any questions about boot loops? Ask them here rather than making new threads.
Click to expand...
Click to collapse
Cangir said:
Flash stock and you are done
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Tried it, didn't work. :/ I don't think I am using the right stock Kernel though. It said JKH1, but not sure if it is the stock one! Please find a link with a stock one that will work on my phone as none will! Thank you.
oinkylicious said:
A link to what? Neither in this thread nor your original post in the correct thread have you said what happens when you flash with Odin (what errors, what messages, what options you're picking), what ROMs you've tried (I try to flash the Kernel which I think is "KH1" (99% sure) sounds rather flakey).
The full, detailed instructions are in the very first post, here in case you missed it.
If it doesn't work when you follow the instructions to the letter, explain in full what does happen and someone might be able to help you.
Any ROMs?
Click to expand...
Click to collapse
Thanks for finding all of this! I tried VillainROM 1.1, didn't work. Just comes up FAIL on Odin. I also tried CF, clock work and many others as I can't remember as I tired loads. :/ I am really stuck and don't know what to do.
Mortonx said:
Please find a link with a stock one that will work on my phone as none will!
Click to expand...
Click to collapse
Assuming you really do have an I9100, stock ROMs are here [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download and you should probably be looking for a WIPE ROM, such as XXKI3:
Intratech said:
XXKI3
Android 2.3.5
This original (unmodified) Wipe Package with new bootloader has: PDA: XXKI3| Modem/phone: XXKI3| CSC: OXAKI3
Download: http://www.multiupload.com/NJV6PR87Y3
These packages have the new bootloader removed and repacked with the old ones so you can safely reset the binary counter with a Jig.
Click to expand...
Click to collapse
oinkylicious said:
Assuming you really do have an I9100, stock ROMs are here [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download and you should probably be looking for a WIPE ROM, such as XXKI3:
Click to expand...
Click to collapse
Okay thank you, I will give that a try! what shall I do once I have flashed the phone with this wipe rom? Thank you again! Hopefully we should get my phone working by the end of tonight!
Mortonx said:
what shall I do once I have flashed the phone with this wipe rom?
Click to expand...
Click to collapse
Use the phone?
Please make sure you're checking and double checking what you're choosing in Odin, that you have no Kies programs running etc, in other words, read Intratech's posts fully before flashing again!
oinkylicious said:
Use the phone?
Please make sure you're checking and double checking what you're choosing in Odin, that you have no Kies programs running etc, in other words, read Intratech's posts fully before flashing again!
Click to expand...
Click to collapse
Isn't working!! Kies is closed (completely) and it just comes up fail on odin.
Mortonx said:
Isn't working!! Kies is closed (completely) and it just comes up fail on odin.
Click to expand...
Click to collapse
What colour, at what point, is it ever a different colour, is anything happening on the phone? Have you tried different USB ports?
Have you checked task manager for kies related processes? (ctrl+shift+esc, processes), are the drivers correctly installed, what operating system are you using and which architecture? Have you tried it on a different computer?
oinkylicious said:
What colour, at what point, is it ever a different colour, is anything happening on the phone? Have you tried different USB ports?
Have you checked task manager for kies related processes? (ctrl+shift+esc, processes), are the drivers correctly installed, what operating system are you using and which architecture? Have you tried it on a different computer?
Click to expand...
Click to collapse
It says FAIL in red background and black writing and it says "<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Also Checked to see if any Kies programmes was running but there isn't. (Doubled checked in processes as well!)
I am running Windows 7 Home Premium 64 bit and I have tried on a different computer but the phone won't connect at all on that one! (Windows 7 Ultimate 84 bit.)
If you try to flash a multi file firmware and checking re-partition it still fails? I had this by using one file firmwares. Go to Intratech's thread and download a multi file firmware with new bootloaders to get comletely stock. This can not fail.
I have found out that the most stable multi file is xxki3.
While flashing this that way you should not encounter any failures with Odin.
Sent from my GT-I9100 using xda premium
hi guys, any help would really be appreciated.. i think i have the exact same problem as op. let me articulate it in a slightly more clear manner:
1. i flashed an insecure kernel in order to get root access. somewhere along this process somehow something got messed up.
2. the phone is stuck in a bootloop. this shouldnt be a problem! simply flash stock rom/stock modem, enter recovery mode and do a reset!
3. uh-oh. recovery mode crashes instantly, and the endless bootcycle comes back.
4. ive tried using cwm recovery, stock recovery, both of these have failed.
5. download mode works completely fine (using odin 1.85)
im running the AT&T version of galaxy s2 i777, but posting on those forums havent really gotten a solution, with build version UCKH7. I've tried to find a "wipe" package for this build but although i can find stock PDA and stock MODEM, i cannot find stock CSC. in desperation, i have also tried flashing PDA/MODEM/stock PIT at the same time, but this also has not worked. someone on the i777 forums has recommended trying to flash a new bootloader, but im a little wary with taking that step. noone has done it before.
any ideas?
TL;DR: my phone is stuck in a boot loop, but unlike others, recovery mode crashes instantly before i can even explore any options, and reenters bootloop into main android.
Mortonx said:
It says FAIL in red background and black writing and it says "<ID:0/005> Added!!
Click to expand...
Click to collapse
What exactly are you putting into each section in Odin, and which settings are checked? How long does the process take? Did you ever (either when you originally messed it up or while trying to fix it) choose any of the pit/repartition settings? What did you originally flash to cause the problem in the first place?
Is it possible to get screenshots with phone connected before flashing and one afterwards with all the options you're using shown?
This thread mentions something I asked earlier as the solution but you didn't respond to. Have you tried a different USB port and reinstalled the drivers (in Kies: tools -> install driver).
Kies also has a "firmware emergency recovery" though I've got no idea what that does, or if it's recommended to try.
oinkylicious said:
What exactly are you putting into each section in Odin, and which settings are checked? How long does the process take? Did you ever (either when you originally messed it up or while trying to fix it) choose any of the pit/repartition settings? What did you originally flash to cause the problem in the first place?
Is it possible to get screenshots with phone connected before flashing and one afterwards with all the options you're using shown?
This thread mentions something I asked earlier as the solution but you didn't respond to. Have you tried a different USB port and reinstalled the drivers (in Kies: tools -> install driver).
Kies also has a "firmware emergency recovery" though I've got no idea what that does, or if it's recommended to try.
Click to expand...
Click to collapse
It takes like 2 seconds on this one, other kernels which I flash take about 30 seconds then say PASS, but still boot loops. I haven't choose any of the pit/repartition settings. I just flashed the wrong kernel from trying to root the device for the first time, but this just put it into the boot loop.
I am just putting the "New_Bootloader_GT-I9100_OXA_I9100XXKI3_I9100XXKI3_I9100OXAKI3.tar" in into the PDA and then pressing start. I can't put a screen shot up here though as it won't let me.
I have tried different USB ports and reinstalled drivers. I also tried "firmware emergency recovery" but kies doesn't connect to my phone.
mariosraptor said:
If you try to flash a multi file firmware and checking re-partition it still fails?
Click to expand...
Click to collapse
To OP, have you tried this? If all of your attempts thus far have involved a single file, and no repartition, if could be worth a try with one of the packages which has PDA/Phone/CSC as separate files (as on Intratech's description here: http://img94.imageshack.us/img94/8290/odinxm.jpg). Failing that, you could try a ROM which comes with a PIT file to repartition the phone in case the partition table is somehow corrupt/damaged/incorrect, but you might want to consider that a last resort.
I was using this thread to flash my phone until I got to flashing a custom ROM.
Every time I try to flash a new rom, CWR gives me a Status 7 error and doesn't complete.
I try to put my phone to stock every time but it does not seem to work.
Note: if it helps, I cannot seem to unmount my USB
TechActivist said:
I was using this thread to flash my phone until I got to flashing a custom ROM.
Every time I try to flash a new rom, CWR gives me a Status 7 error and doesn't complete.
I try to put my phone to stock every time but it does not seem to work.
Note: if it helps, I cannot seem to unmount my USB
Click to expand...
Click to collapse
Have you tried to use ODIN to flash your phone back to a working ROM?
Also, be sure to flash the right ROM.. Verizon Fascinate and Telus Fascinate are 2 different phones..
Well... now theres a problem as ODIN won't see my phone in download mode. :/
Reinstall your USB drivers, and see if your cable is seated properly. If you can get into Download mode, most cables used will allow Odin to recognize. You may have to Odin back to a different ROM like Neo said.
Make sure you have the latest version of Odin
JJ5150 said:
Reinstall your USB drivers, and see if your cable is seated properly. If you can get into Download mode, most cables used will allow Odin to recognize. You may have to Odin back to a different ROM like Neo said.
Make sure you have the latest version of Odin
Click to expand...
Click to collapse
Tried it , didn't work. Reinstalled drivers, new files, new cable nope.
I can flash the i9000 kernal, and then clockwork recovery gives me a STATUS 7 error when I try to install a rom.
EDIT: seems like clockwork cannot unmount my internal sd card. hmm...
TechActivist said:
EDIT: seems like clockwork cannot unmount my internal sd card. hmm...
Click to expand...
Click to collapse
did you try yanking the card and cleaning it with alcohol? might work.
when all else fails, odin back to stock and start over.
How to unbrick...
http://forum.xda-developers.com/showthread.php?t=1026746
http://forum.xda-developers.com/showthread.php?t=1288162
JJ5150 said:
did you try yanking the card and cleaning it with alcohol? might work.
when all else fails, odin back to stock and start over.
How to unbrick...
http://forum.xda-developers.com/showthread.php?t=1026746
http://forum.xda-developers.com/showthread.php?t=1288162
Click to expand...
Click to collapse
Did it over and over man.
It won't install any ROMS, kernals sure, not zips. If anything, everytime I try to unmount USB in Clockwork Recovery, it blinks and goes back to the previous screen.
Any ideas?
EDIT: The phone now won't get past the bootloader. Cannot get into Clockwork Recovery
when you flash back to stock with Odin... are you using all the fields in the screenshot on that link? eg. Pit, pda, phone, csc or just pda?
because I only use pda and flash the stock .md5 file. i'm out of ideas man... I'm kinda n00b at this myself, just bumping to maybe get a someone's attention.
JJ5150 said:
when you flash back to stock with Odin... are you using all the fields in the screenshot on that link? eg. Pit, pda, phone, csc or just pda?
because I only use pda and flash the stock .md5 file. i'm out of ideas man... I'm kinda n00b at this myself, just bumping to maybe get a someone's attention.
Click to expand...
Click to collapse
Every single file, I use to precisely.
It seems like Clockwork recovery just doesn't like me.
I keep bringing this up but I cannot unmount USB storage in Clockwork. Does this mean anything to anyone?
TechActivist said:
Every single file, I use to precisely.
It seems like Clockwork recovery just doesn't like me.
I keep bringing this up but I cannot unmount USB storage in Clockwork. Does this mean anything to anyone?
Click to expand...
Click to collapse
So can you get into download mode and use ODIN to flash or not?
Are you still stuck at bootloader? Please be as descriptive as you can.
And no, I never heard of "cannot unmount USB storage" CWM... I've heard of mounting issues, but not unmounting...
IMHO, I think your best option here is to get ODIN working, then flash to a stock ROM with stock Kernel with PIT (Repartition) then flash CWM 2.5.
I dont see why you would need to unmount? what you can do is remove the battery cover remove the sd card. with the battery still out plug the phone into your usb and hold the volume down button. does it go into download mode then?
Then can Odin see your phone?
Also worst case try a different PC all together.
Are you on VZW or Telus?
I can get into download mode and use ODIN yes.
I am no longer stuck at the bootloader and can boot into stock froyo with ODIN.
I use ODIN to flash stock ROM and kernel, and everytime I flash back CWM 2.5. It won't let me install any ROMs. It gives me a status 7 error and aborts.
CWM just won't work
In case you didn't know, CWM can mount USB just like android so I don't have to boot into the OS to place a file. under mounts>mount USB storage>Unmount/Mount
Everytime I press unmount, the screen blinks and takes me back to the previous screen.
This is a Telus Fascinate.
I had a similar problem. Turns out my USB cable was culprit. Several others have had similar problems. Try a different USB cable.
Sent from my SCH-I500 using XDA App
TechActivist said:
In case you didn't know, CWM can mount USB just like android so I don't have to boot into the OS to place a file. under mounts>mount USB storage>Unmount/Mount
This is a Telus Fascinate.
Click to expand...
Click to collapse
Oh i am aware of the Feature, what i was saying is it shouldnt affect flashing a rom.
also one thing i noticed is your using an older CWM, which rom are you trying to flash? If it is an MTD like CM7 then you should use the cwm 3 or 4 fixed for cm7
Check section 3 http://forum.xda-developers.com/showthread.php?t=1238070
xwhofarted said:
Oh i am aware of the Feature, what i was saying is it shouldnt affect flashing a rom.
also one thing i noticed is your using an older CWM, which rom are you trying to flash? If it is an MTD like CM7 then you should use the cwm 3 or 4 fixed for cm7
Check section 3 http://forum.xda-developers.com/showthread.php?t=1238070
Click to expand...
Click to collapse
Tried the fix, ODIN starts and then fails in the middle saying NAND write failed.
What could this mean? ODIN fails to install the fix :/
Tried a different cable, so cable is not the issue here.
Can we get one thing straight here though? The phone is not bricked as I can get into ODIN and flash what seems to be only stock files?
As long as Odin can see it you can always go to stock. As long as Odin is ok there is hope.
As i have a Verizon Fassy, I may not be much more help.
Worst case find a Tellus Rom that you can Odin and do that.
Good Luck
xwhofarted said:
As long as Odin can see it you can always go to stock. As long as Odin is ok there is hope.
As i have a Verizon Fassy, I may not be much more help.
Worst case find a Tellus Rom that you can Odin and do that.
Good Luck
Click to expand...
Click to collapse
Thanks
But any idea as to what would cause a NAND write fail? is the NAND locked or something?
So anyone have any idea?
TechActivist said:
So anyone have any idea?
Click to expand...
Click to collapse
My brothers dell 14 XPS can't ever flash in ODIN to him phone. Always has to use someone else's computer.
So I suggest you try another computer. Changing ports WONT do anything, neither will cables.
Have you tried heimdall instead of Odin?
Sent from my CM7 glitch'd fassy
Hi
A friends S2 suddenly stopped working. someone tried to flash something (i dont know what he did exactly)
....
when i got it, i just could enter downloadmode. also: when pluging in a usb cable it says, that a problem while flashing was encountered, and i should enter recoverymode in kies and try again.
What i tried:
- installed kies and tried a fresh stock flash. => failed. it stuck at 2% and failed after....HOURS...when phone ran out of batt
- tried with Odin (v3.07, 1.85 or 83? or both...dunno): tried with different roms, one-package, 3-part-package, with pit, without pit (repartition) => everything failed.
- also cant access via QtADB (tried it just for fun-.-)
is there something left i can try? its a I9100 (NO G version) and flawlessly enters downloadmode....im running out of ideas, but i think this poor phone is done...
...still...any ideas?
wishing you a nice day
CJ
just btw: i never had a S2....i have my GT-S5830 aka. Cooper aka Galaxy Ace. so if there are things i should be aware of at this device...pls tell me^^
Check out @Hopper8 threads for help with Odin when a flash fails.
if you mena his "a odin flash failed" thread: i tried this already....
CJCord said:
if you mena his "a odin flash failed" thread: i tried this already....
Click to expand...
Click to collapse
My thread in my signature? And you tried everything? And then tried everything all over again, on a new PC? I'm sorry but I highly doubt it. There is no easy fix, or magic trick to make it work. It requires perseverance.
Have you tried to flash siyah kernel then boot to recovery cwm? Then install a custom rom?
Hi
Im now trying since sunday....
Tried different roms, kernels, pcs, odin versions, ....always the same....
It fails when it starts to write on nand....
Sent from my GT-S5830 using xda app-developers app
NAND stuffed; service centre (motherboard replacement), or you can keep trying (have you tried a 3 part firmware ?).
i also tried a 3 part firmware. same problem/fail.
Hi guys,
I'm very new here and also a noob when it comes to rooting and flashing custom ROMS. I was following the instructions of Archidroid in installing his CustomROm Archidroid. The instructions are easy to understand and very helpful. I was able to download his ROM and put it to my externalSDcard as recommended. I downloaded the lates Odin and Philztouchrecovery as instructed and put it on the PDA field. Then I was successful in putting my phone to download mode. Now here's the problem after I replugged my phone to my computer, nothing happened! "<ID:0/003> Added!!". >>This message did not appear on the message box of Odin. The last message from Odin is leave CS mode. What am I doing wrong?? My phone is the Galaxy S3-GT-I9300. And it hasn't been rooted yet. If there's already a thread about this please let me know so I can get to it, I tried searching but I can't find the answers that I need here. Please help!
BodjieJed said:
Hi guys,
I'm very new here and also a noob when it comes to rooting and flashing custom ROMS. I was following the instructions of Archidroid in installing his CustomROm Archidroid. The instructions are easy to understand and very helpful. I was able to download his ROM and put it to my externalSDcard as recommended. I downloaded the lates Odin and Philztouchrecovery as instructed and put it on the PDA field. Then I was successful in putting my phone to download mode. Now here's the problem after I replugged my phone to my computer, nothing happened! "<ID:0/003> Added!!". >>This message did not appear on the message box of Odin. The last message from Odin is leave CS mode. What am I doing wrong?? My phone is the Galaxy S3-GT-I9300. And it hasn't been rooted yet. If there's already a thread about this please let me know so I can get to it, I tried searching but I can't find the answers that I need here. Please help!
Click to expand...
Click to collapse
is your phone recognized by odin? i mean it should look like com:xx. if not, try changing the usb ports. and by the way you sure you are in download mode? volume down+home+power ?
sriram231092 said:
is your phone recognized by odin? i mean it should look like com:xx. if not, try changing the usb ports. and by the way you sure you are in download mode? volume down+home+power ?
Click to expand...
Click to collapse
Have tried all three USB ports in my laptop but still the same and yes, I am in download mode. One thing I can add and I don't know if it has anything to do with it is, on the top left the custom binary is a NO. I'm really new at this. One more question if my phone is being recognized by laptop when I plug it in like it appears as a portable device on My Computer it means that the USB drivers are installed and correct, right?
BodjieJed said:
Have tried all three USB ports in my laptop but still the same and yes, I am in download mode. One thing I can add and I don't know if it has anything to do with it is, on the top left the custom binary is a NO. I'm really new at this. One more question if my phone is being recognized by laptop when I plug it in like it appears as a portable device on My Computer it means that the USB drivers are installed and correct, right?
Click to expand...
Click to collapse
custom binary has nothing to do here buddy. first you need to root the phone using CF-ROOT method. and flash the philz recovery.zip from CWM recovery that comes after flashing with CF-ROOT. later you will be able to flash any custom rom through philz recovery.
step1: open odin
step2: put phone in download mode(volume down+home+power)
step3: connect phone via usb
step4: odin recognizes the phone
step5: cf-root and the following methods stated at the beginning
sriram231092 said:
custom binary has nothing to do here buddy. first you need to root the phone using CF-ROOT method. and flash the philz recovery.zip from CWM recovery that comes after flashing with CF-ROOT. later you will be able to flash any custom rom through philz recovery.
step1: open odin
step2: put phone in download mode(volume down+home+power)
step3: connect phone via usb
step4: odin recognizes the phone
step5: cf-root and the following methods stated at the beginning
Click to expand...
Click to collapse
I think I know the problem now. Odin is not recognizing my phone when its on Odin mode. I tried 3 different USB cables already but just the same. I tried to what you said but Odin is simply not recognizing my phone.
BodjieJed said:
I think I know the problem now. Odin is not recognizing my phone when its on Odin mode. I tried 3 different USB cables already but just the same. I tried to what you said but Odin is simply not recognizing my phone.
Click to expand...
Click to collapse
do you have kies installed on your laptop? if yes, stop it running in the background from task manager. if this is not the problem, try another laptop or pc.
sriram231092 said:
do you have kies installed on your laptop? if yes, stop it running in the background from task manager. if this is not the problem, try another laptop or pc.
Click to expand...
Click to collapse
I checked the task manager and KIES is not running and its not even installed. I guess I need to try a different laptop or PC.
BodjieJed said:
I checked the task manager and KIES is not running and its not even installed. I guess I need to try a different laptop or PC.
Click to expand...
Click to collapse
yes you need to. also try restarting your laptop.
Sounds more like no drivers installed. Try installing kies to get the drivers and then ensure it's not running in the background. That should solve your problem.
Sent from my GT-I9300 using xda app-developers app
C7SS said:
Sounds more like no drivers installed. Try installing kies to get the drivers and then ensure it's not running in the background. That should solve your problem.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I tried it on another laptop and its still the same. So I guess I'm gonna try to install KIES here. Thanks guys, I really appreciate it. I'll update you what will happen next.
U have to install drivers first u know that right?
Sent From My Galaxy S III Using XDA Premium 4
Do all of the above and if none of that works try older version of Odin....I have had problems before with newer version of Odin and found that some of the older versions work well.
tallman43 said:
Do all of the above and if none of that works try older version of Odin....I have had problems before with newer version of Odin and found that some of the older versions work well.
Click to expand...
Click to collapse
You're all correct!! Its the drivers! Thanks so much guys!
Little info I have a verizon galaxy s4 that I brought already rooted running a stock rom and safestrap recovery
Well at the doctors office letting my son play on my phone he some how got into the recovery amd installed a eclipse rom I guess the guy before me had on the device I never dealed wirh root before so now my ohone stuck on the boot screen and it seems I don't have the safestrap recovery no more somehow
Now I tried to just used odin mode to get back to completly stock but everything I do fails I got the tar file for my phone I put the phone in download mode and odin does this
Osm enter cs for md5
Osm check md5 do not unplug
Osm please wait
Osm i545vruemk2_i545vzwemk2_i545vruemk2_home.tar.md5 is valid
Osm chexkimg md5 sucessfully
Osm leave cs
Then I hit start and it says
Odin v.3 engine
Intialzation
Get pitnformmappimg
Complete (write) operation fail
All threads completed (succeed 0/failed 1
On my phone says after fail
Product name sch-i545
Current binery samsung official
System status custom
Knox kernel lock 0x0
Knox warrenty void 0x0
Csb-config-lsb 0x30
Write protection enabled
Emmc burst mode enabled
Start (224, 1448)
Pkease help me I domt have a clue whatnim doimg wrong I folowed the video
eddieq2922 said:
Little info I have a verizon galaxy s4 that I brought already rooted running a stock rom and safestrap recovery
Well at the doctors office letting my son play on my phone he some how got into the recovery amd installed a eclipse rom I guess the guy before me had on the device I never dealed wirh root before so now my ohone stuck on the boot screen and it seems I don't have the safestrap recovery no more somehow
Now I tried to just used odin mode to get back to completly stock but everything I do fails I got the tar file for my phone I put the phone in download mode and odin does this
Osm enter cs for md5
Osm check md5 do not unplug
Osm please wait
Osm i545vruemk2_i545vzwemk2_i545vruemk2_home.tar.md5 is valid
Osm chexkimg md5 sucessfully
Osm leave cs
Then I hit start and it says
Odin v.3 engine
Intialzation
Get pitnformmappimg
Complete (write) operation fail
All threads completed (succeed 0/failed 1
On my phone says after fail
Product name sch-i545
Current binery samsung official
System status custom
Knox kernel lock 0x0
Knox warrenty void 0x0
Csb-config-lsb 0x30
Write protection enabled
Emmc burst mode enabled
Start (224, 1448)
Pkease help me I domt have a clue whatnim doimg wrong I folowed the video
Click to expand...
Click to collapse
It could be a bad tar file. I would download it again and reflash in Odin. Use the Full Wipe Method
http://forum.xda-developers.com/showthread.php?t=2578209
cbmggm said:
It could be a bad tar file. I would download it again and reflash in Odin. Use the Full Wipe Method
http://forum.xda-developers.com/showthread.php?t=2578209
Click to expand...
Click to collapse
Thanks I'm going to trynthis now
ok guys i tried getting the new tar file and same results nothing in the progress bar it gets to set partion then it fails saying completed(write)failed i cant do anything on the phone it self i did figered somehow i can get into stock recovery but cant do anything odin keeps failing please please help me
eddieq2922 said:
Thanks I'm going to trynthis now
Click to expand...
Click to collapse
I just sent you a PM
You might be flashing the wrong firmware, check this thread out:
http://forum.xda-developers.com/showthread.php?t=2524883
eddieq2922 said:
ok guys i tried getting the new tar file and same results nothing in the progress bar it gets to set partion then it fails saying completed(write)failed i cant do anything on the phone it self i did figered somehow i can get into stock recovery but cant do anything odin keeps failing please please help me
Click to expand...
Click to collapse
Do you have a known good PIT file for your phone?
I wouldn't put anything into the PIT slot, flash just the .tar.md5 in the AP slot, and don't select "Re-partition".
Since it seems to be failing when trying to repartition, let's skip that (as above) and see if it's any better.
k1mu said:
Do you have a known good PIT file for your phone?
I wouldn't put anything into the PIT slot, flash just the .tar.md5 in the AP slot, and don't select "Re-partition".
Since it seems to be failing when trying to repartition, let's skip that (as above) and see if it's any better.
Click to expand...
Click to collapse
okay im going to doit again and make sure it not check or anythig thanks ahead
still no luck i check everything i dont see what im doing wrong it get s to the set partion and fails everytime i dont have the box checked i got the right tar file just wont flashed really need help
Bumb please help
eddieq2922 said:
Bumb please help
Click to expand...
Click to collapse
Are sure the download is good? Did you check the MD5? Maybe try downloading it again.
Sent from my NCC 1701 using Tapatalk 4
eddieq2922 said:
Bumb please help
Click to expand...
Click to collapse
Things to try :
Different USB Cable
Different USB Port on PC
A Different version of Odin
Heimdall instead of Odin
Re-download the full wipe MK2
Worth a shot...
Sent from my SCH-I545 using Tapatalk
I tried different ports I tride differemt odin I downloaded the md5 again full wipe and still same result
eddieq2922 said:
I tried different ports I tride differemt odin I downloaded the md5 again full wipe and still same result
Click to expand...
Click to collapse
Well I'm out of ideas myself. Heimdall can be found here http://glassechidna.com.au/heimdall/
Some have had much better luck with it from what I've seen. I'm not an expert in Odin errors just was thinking of what I'd try. You can go between MK2 and MJ7 as well, may be worth trying MJ7 full wipe, just for the hell of it.
Hopefully that works or maybe someone else here will have another idea.
Sent from my SCH-I545 using Tapatalk
The video looked so easy on going back to stock I'm doimg exactly as there doing just can't get it to pass
eddieq2922 said:
I tried different ports I tride differemt odin I downloaded the md5 again full wipe and still same result
Click to expand...
Click to collapse
Sounds dumb, and sorry if you tried already, but did you try a different usb cable? Just trying to throw something against the wall and hope it sticks.
Coycaine said:
Sounds dumb, and sorry if you tried already, but did you try a different usb cable? Just trying to throw something against the wall and hope it sticks.
Click to expand...
Click to collapse
No need to say sorry Im willing to try anythimg I greatly apreciate the help still that didn't make a difference same results I don't get it at al if I could get a custom recovery back on I have a back up but I lost the safestrap recovery somehow now I only got stock recovery damn kids
Bump
eddieq2922 said:
Bump
Click to expand...
Click to collapse
First, everyone: asking him to check the MD5 is a waste of time. It's a .tar.md5, and ODIN verifies the MD5 when it reads it. Since ODIN isn't finding a problem, it's OK. (There's no chance whatsoever that a file could be corrupt and still have a MD5 that verifies while still being a valid tar file.)
What I would do is to go read this thread for the MK2 files.
Given what you're seeing, try the emergency recovery. Download the .PIT file from there (remember me asking about that?) and use that when flashing the full-wipe file in ODIN.
This might sound crazy, but are you using the samsung OEM USB cable when your trying to odin? I had the note 2 before getting this phone and every time I used oden with a 3rd party USB cable, I always ran into problems. I always had to use the OEM cable. Also, if it's bootlooping or hanging at the boot screen, you should be able to get it working again. The only time you worry is if it doesn't do anything at all. When you said you can't get into safestrap, what about the stock recovery?
Sent from my SCH-I545 using Tapatalk
Bradh024 said:
This might sound crazy, but are you using the samsung OEM USB cable when your trying to odin? I had the note 2 before getting this phone and every time I used oden with a 3rd party USB cable, I always ran into problems. I always had to use the OEM cable. Also, if it's bootlooping or hanging at the boot screen, you should be able to get it working again. The only time you worry is if it doesn't do anything at all. When you said you can't get into safestrap, what about the stock recovery?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
im using the the oem cable and as far as stock recovery yes i can get into stock recovery no problem