I just upgraded my Verizon Galaxy S3 to CM10.1 Milestone build, running jb 4.2.1. When I use the built in wifi ap, as soon as i turn it on, it says "no internet connection" on the phone. On my computer, the network name does show up. If the ap is configured with any security, on the computer it will say "connect timed out" when i try to connect. When i make the ap open, the computer will connect to it. However, since my phone drops it's internet connection as soon as the ap is turned on, my computer gets nothing from being connected to the ap. I also tried using "WiFi Tether" app. When I start it, it says "tethering started but with errors" and in the log it shows that "configuring ap" and "starting ap" failed. It doesn't even show up in my list of wifi networks on the computer.
Both wifi tether app and the built in wifi ap worked perfectly fine in CM10. Any suggestions as to the fix? It's a CM10.1 Milestone build, so I would think they'd notice something like wifi tether not working for a MILESTONE build!? Maybe I have to upgrade my radio or find the source code for the wifi ap somewhere? This especially sucks since I just cancelled my Comcast internet, so i'm 100% dependent on my phone! Please help! :crying:
Hi I have the same problem as you! Have you figured out a way to fix it yet?
awesomeo3000 said:
I just upgraded my Verizon Galaxy S3 to CM10.1 Milestone build, running jb 4.2.1. When I use the built in wifi ap, as soon as i turn it on, it says "no internet connection" on the phone. On my computer, the network name does show up. If the ap is configured with any security, on the computer it will say "connect timed out" when i try to connect. When i make the ap open, the computer will connect to it. However, since my phone drops it's internet connection as soon as the ap is turned on, my computer gets nothing from being connected to the ap. I also tried using "WiFi Tether" app. When I start it, it says "tethering started but with errors" and in the log it shows that "configuring ap" and "starting ap" failed. It doesn't even show up in my list of wifi networks on the computer.
Both wifi tether app and the built in wifi ap worked perfectly fine in CM10. Any suggestions as to the fix? It's a CM10.1 Milestone build, so I would think they'd notice something like wifi tether not working for a MILESTONE build!? Maybe I have to upgrade my radio or find the source code for the wifi ap somewhere? This especially sucks since I just cancelled my Comcast internet, so i'm 100% dependent on my phone! Please help! :crying:
Click to expand...
Click to collapse
hellothere123 said:
Hi I have the same problem as you! Have you figured out a way to fix it yet?
Click to expand...
Click to collapse
Unfortunately the entirety of the internet was completely useless, but I did find a simple solution. I ended up running the 20130124 nightly build. Funny thing is i just went to look at my phone, and it claims i'm running the M1 build, but i'm sure i not. But i just used the CM updater (system settings, about phone, cm updates) and installed the 0124 nightly from there. Everything works great, except for when using the bluetooth for music in the car, the bluetooth connection is all choppy and unbearable. But the voice bluetooth connection for handsfree calling works just fine. So try that. But the next monthly build should be coming out in a couple days, and I'll probably upgrade it. Even the one i'm using occasionally says "no network connection" and it never reconnects, even when there's strong signal. So I just have to reboot it and it works great again for a while.
Related
So I know wifi in android is buggy, this isn't a question about that.
My Touchpad won't connect to my wireless network at work. (in webOS or android) It always fails the IP configuration part. My android phone connects fine, and my laptop, and my iPad.
Kind of kills the usefulness of the tablet for me. Wondering if I should call up HP before my 90days are up.
Thanks in advance
I have had no issues with webOS 3.0.2 or 3.0.4 at work or home (and I run a number of access points at both locations). Always connects by itself everytime. Too early to tell with 3.0.5 but no issues so far.
Have you tried other routers? It could be just some issue with your router. Have you tried to manually assign an IP, I know you can in android.
spunker88 said:
Have you tried other routers? It could be just some issue with your router. Have you tried to manually assign an IP, I know you can in android.
Click to expand...
Click to collapse
It connects to my home network fine, just not the work one. Tried manually assigning an IP and that didn't work in either OS. Going to install the update to webOS and see if that fixes things.
As poster above mentioned, corporate/work networks seem to be the only thing that webOS MIGHT not play well with occasionally. I've gotten it to successfully connect to my work's 802.1x EAP network. It actually worked quite well, but then sometimes it stumbles a bit before connecting.
For the most part though, webOS wifi works just fine. Of course, this is because HP dev'd it with the drivers they have, that we DONT have, and most likely will never have.
Wifi now connects on both OS's after updating webOS to 3.05
Lol go figure
R1ptide said:
Wifi now connects on both OS's after updating webOS to 3.05
Lol go figure
Click to expand...
Click to collapse
It hasn't before for you? I'm curious about your experience.
The deal with Wifi in android is multi-faceted:
1. Accessing the wifi options sometimes crashes the thing, and you have to force close the settings app and try again.
2. With Wifi on, the wifi menu can be quite sluggish
3. A lot of times, it wont even scan for networks. It just says disconnected for ages, or will eventually scan, then try to connect, but never get past "Acquiring IP address".
4. A lot of times it will randomly lose its connection, yet still indicate that it's connected just fine. A toggling of the wifi usually fixes this, but also starts you at square 1 with attempting to connect to an AP. For some people, this process can be a nightmare.
5. Some people simply cannot connected to their secured network at all. Period.
Are you experiencing any of these issues still?
nickmv said:
It hasn't before for you? I'm curious about your experience.
The deal with Wifi in android is multi-faceted:
1. Accessing the wifi options sometimes crashes the thing, and you have to force close the settings app and try again.
2. With Wifi on, the wifi menu can be quite sluggish
3. A lot of times, it wont even scan for networks. It just says disconnected for ages, or will eventually scan, then try to connect, but never get past "Acquiring IP address".
4. A lot of times it will randomly lose its connection, yet still indicate that it's connected just fine. A toggling of the wifi usually fixes this, but also starts you at square 1 with attempting to connect to an AP. For some people, this process can be a nightmare.
5. Some people simply cannot connected to their secured network at all. Period.
Are you experiencing any of these issues still?
Click to expand...
Click to collapse
Before update:
never had any problems with wifi at all, except it just wouldn't connect to either of my two networks at work in either OS. Neither OS could get past the IP config stage. Tried manually assigning IPs in both OS's but that accomplished nothing. Home 5ghz network zero issues.
After update:
Instant connection, no issues.
Running stock, clean install of .12. My Hotspot (which I do pay for, so that isn't the issue) isn't behaving at all. The phone is broadcasting the network and devices can authenticate, but they're not being routed to the Internet once they're in. "Limited connectivity" or "No Internet" statuses on my PC, lack of IP config details on my iPod/Pad.
I called VZW support last night and the guy had me shut the phone off, then he reset something on his end and had me turn it back on again. For an evening it ran like a top. Today I'm right back where I sarted. It *can* work, it just isn't.
Interestingly, when I run Mobile Hotpot, it gives no indication of trouble, but in the Tethering & mobile Hotspot menu in Settings, when i run the Hotspot, I get "Error" showing up in there. Doesn't say what kind of error, no detail/debugging, just "Error."
To recap:
ICS .12, stock
WiFi network ok, Routing not (apparently)
"Error" in settings when Hotspot is on.
Only thing I've seen that sounds anything like this was an APN issue on a different carrier's ICS phones post-update. I'm stumped at this point and like my odds better here than I do calling Verizon again...
I am having the same problem after OTA ICS, I can turn my hotspot on and it says connected to 1 device (my laptop) and when I try to connect to the wifi it takes a while and says "limited connection" and will not work. If I go to my mobile settings it says hotspot...error. usb tethering (internet connection mode) still works but the wifi hotspot doesnt at all, I thought they were supposed to fix this!
Hi i went from stock ics on my ray to cm9 by followingnexact step by step guide provided by cm9. Used their kernel as well. Have never modded my phone before. Having a small problem with wifi though. After my phone has been asleep for a while, if i wake it up the wifi icon in status bar is no longer blue its a dark grey and i can no longer browse anything or use the internet. Ive tried rebooting. I did the whole wipe cache etc when installing cm9. In wifi settings in advanced ive also left the setting to "leave wifi on when sleep" checked. If i turn off and on the wifi connection the phone ofcourse is able to reconnect again the icon is blue and i can connect. It not jsut a one off thing its been happening since i isntalled the rom.
If i wakek from sleep a few minutes later i have no issue with wifi. Its only when its been sleep for a while do i have this issue.
Any solutions?
I have the exact same problem but for me it's even bigger, whenever i turn on wifi on my modem, i can connect to internet on my phone, but after awhile i lose my connection completely, on my phone and on my pc also, the only way to get it back is to reset my router and wait for like 5-10minutes...
dellboyan said:
I have the exact same problem but for me it's even bigger, whenever i turn on wifi on my modem, i can connect to internet on my phone, but after awhile i lose my connection completely, on my phone and on my pc also, the only way to get it back is to reset my router and wait for like 5-10minutes...
Click to expand...
Click to collapse
If its also an issue with your. Pc then your issue might be also the router.
My other devices actually work fine in my case its oky this phone that has issues. Macbook iphone ipad nexus s no problems with those.
Same issue here. I can see available networks but unable to connect. There should be no problem with the wifi router as all my other devices work well and I have tried another router. Now I have to flash back to stock firmware.
illus4 said:
Same issue here. I can see available networks but unable to connect. There should be no problem with the wifi router as all my other devices work well and I have tried another router. Now I have to flash back to stock firmware.
Click to expand...
Click to collapse
Your issue seems more severe than mine. Mine actually connects and works, just that when it wakes from long sleep it wont work until i turn off and on wifi.
I get this problem too, but my problem even worse than yours. My wifi lose it's connection after a while, but the icon on status bar shows it's connected, running ping test, browse, even play store can't be accessed. I pinged the router and got unreachable.
And yeah, this problem occurs when I'm using all ICS based rom..
Anybody has any idea if this is a known problem, or if its just us few having thisissue?
illus4 said:
Same issue here. I can see available networks but unable to connect. There should be no problem with the wifi router as all my other devices work well and I have tried another router. Now I have to flash back to stock firmware.
Click to expand...
Click to collapse
I have same problem. I have SE xperia mini with CM9. WiFi worked fine until yesterday. Now phone can't connect to AP (full signal - try connect -> signal drops down), but sharing 3G internet over WiFi works fine. I cleared dalvik cache, but that didn't help.
having issues. wifi at home works with no issue.
no rom installed. stock 4.04 updated to 4.1.2.
laptop connects fine, so I know the wireless works otherwise.
tried wpa/wpa2 and tkip/aes. nothing. also with no auth.
when I turn on wifi, it says the ssid is 'saved, secured'
yet when I click on it, it offers for me to forget or connect.
when I click on connect it just sits there.
I turned off the at&t wifi as I saw in other posts, but still nothing.
Hello there, it's been a long time since I've posted on XDA but I require assistance. I purchased an S6 Edge a few months back and everything is working as should apart from bluetooth tethering.
I have tried with my laptop and my nexus 7 which I have installed in my car, both of which worked fine with my previous HTC M8. After setting up tethering on my phone, the other devices connect and the icon appears indicating that tethering is active and an internet connection is available, but I am not able to actually connect to the internet.
My Samsung is not rooted, unfortunately, as I don't want to trip 'knox' for warranty purposes.
Just to clarify that I am doing everything correctly, I select 'mobile hotspot and tethering' from the settings menu of my S6 Edge, then 'Bluetooth tethering'. This turns on Bluetooth and enables tethering. From my paired devices (Laptop and nexus 7) I select 'Use as internet connection'. The devices connect and the tethering icon appears. No internet connection is available.
I imagine this isn't a common issue as after searching I didn't find any threads indicating the same problem.
What would be the best way to troubleshoot this?
EDIT: I would like to add that Bluetooth file sharing works without problems.
EDIT: I would also like to add that my phone is SIM free, and I use the same provider as with my previous HTC M8 that worked fine.
My android version is still 5.1.1 as the update is not available in my area yet.
Thanks in advance for any help,
Rob.
Update: I manually updated my phone to 6.0.1 (without rooting) as I never got the update pushed to my phone. I am still having the same bt tethering issue. My phone says I'm connected and sharing internet with my other device (nexus 7) but that device isn't connected. My s6 is connected fine, it's just not sharing properly.
I get the same results with my laptop.
Can any body suggest any fixes??
EDIT: If my phone is connected to wifi, it will share that connection. If it is connected to 3g/4g it doesn't share the connection even though the phone itself is connected.
Bump.
I suppose nobody is having this problem. Is there any way to debug what is happening?
I am having the same problem. Trying to bluetooth tether my Galaxy s6 edge to Galaxy S2 tab. Both on Android 6.0.1 It appears that the connection is established, but internet does not work on the tablet. Let me know if you had any luck.