Related
I am following the bootloader unlock instructions on HTCDev.com (I have unlocked, rooted and flashed other HTC phones) and ADB/Fastboot cannot see phone via USB.
When I try Fastboot oem get_identifier_token it says 'waiting on device' and when I try 'adb devices' it shows nothing.
I thought that the usb drivers were installed when I plugged it in normally because Windows sees the phone and lets me browse the SD card via windows explorer.
Figure that I am missing something simple...
Thanks
Doug
Sent from my EVO using xda app-developers app
Try a different USB port. My laptop has three usb ports, but only one through which I can use adb
a senile fungus said:
Try a different USB port. My laptop has three usb ports, but only one through which I can use adb
Click to expand...
Click to collapse
Thanks... Changed USB ports from front to rear of computer - made a difference. Thanks!
Also, I forgot that I hadn't installed HTC Sync which seems to be a reliable to get the drivers installed. Did that and had a different result.
Thanks again!
sorry if asked
How do I flash a pj75img in bootloader if my it won't even recognize that I have the file on my phone? S-on running swg Rom need to flash a touch panel downgrade for the operation jelly bean Rom
coleone13 said:
How do I flash a pj75img in bootloader if my it won't even recognize that I have the file on my phone? S-on running swg Rom need to flash a touch panel downgrade for the operation jelly bean Rom
Click to expand...
Click to collapse
You have to be S-off to downgrade your touch panel. Won't work otherwise.
Sent from my EVO using xda premium
FinZ28 said:
You have to be S-off to downgrade your touch panel. Won't work otherwise.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Would u please be able to point me in the right direction for the easiest method for windows 8?
coleone13 said:
Would u please be able to point me in the right direction for the easiest method for windows 8?
Click to expand...
Click to collapse
Not sure if Facepalm works on Windows 8 but feel free to take a look. I've never used it but I hear it's fairly straightforward and quick.
http://forum.xda-developers.com/showthread.php?t=2163013
Sent from my EVO using xda premium
If adb detects my phone will I b able to push the pj75img to my phone without soff
Sent from my EVO using xda app-developers app
coleone13 said:
If adb detects my phone will I b able to push the pj75img to my phone without soff
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
No you have to be s-off to flash PJ75IMG files
Sent from "The One"
Copy that. Thanks for the help. Will report back if successful from my win 8 machine
Sent from my EVO using xda app-developers app
I try to do it and whenever I it will reboot into the Juopunutbear and keep trying to connect with the command prompt. It says error look at your device manager for drivers. I'm on hboot 1.58. PLEASE HELP!!!!
TCO_Dubstep said:
I try to do it and whenever I it will reboot into the Juopunutbear and keep trying to connect with the command prompt. It says error look at your device manager for drivers. I'm on hboot 1.58. PLEASE HELP!!!!
Click to expand...
Click to collapse
i been following this guide http://htcevohacks.com/htc-evo-3d-h...c-evo-3d-using-wire-trick-juopunutbear-s-off/ but i guess it doesnt work on hboot 1.58 or at least for me its not working either
TCO_Dubstep said:
I try to do it and whenever I it will reboot into the Juopunutbear and keep trying to connect with the command prompt. It says error look at your device manager for drivers. I'm on hboot 1.58. PLEASE HELP!!!!
Click to expand...
Click to collapse
Does it show up in the device manager? If that's the error did you look? I didnt use the juopunutbear method to s-off but that's got to be where I'd start.
Sent from my HTCEVOV4G using Tapatalk 2
thewraith420 said:
Does it show up in the device manager? If that's the error did you look? I didnt use the juopunutbear method to s-off but that's got to be where I'd start.
Sent from my HTCEVOV4G using Tapatalk 2
Click to expand...
Click to collapse
what did you use? and yes it does show up
http://androidforums.com/showthread.php?p=5810229
Post 50, I found a method to temp root and set mainver low then used closeone's guide to downgrade hboot and ran the 1.13 ruu. And finished it with revolutionary.
Edit: also i am on a 3d not the evo v... I'm just running a v rom
Sent from my HTCEVOV4G using Tapatalk 2
thewraith420 said:
Post 50, I found a method to temp root and set mainver low then used closeone's guide to downgrade hboot and ran the 1.13 ruu. And finished it with revolutionary.
Edit: also i am on a 3d not the evo v... I'm just running a v rom
Sent from my HTCEVOV4G using Tapatalk 2
Click to expand...
Click to collapse
How do i run a ADB Shell? Sorry. A bit of a newb at this.
TCO_Dubstep said:
How do i run a ADB Shell? Sorry. A bit of a newb at this.
Click to expand...
Click to collapse
Umm adb= Android Debug Bridge it's a way of using a windows or Linux command prompt to send commands to your phone. I'm not really the best for step by step instructions on setting it up but search around a little and I'm sure you can find a guide. Once you have adb working its just copy and paste commands. Besides it'll be good for you to learn a little about it. It can come in handy if your in a jam.
Edit: was just thinking about this more.... Didn't you have to unlock bootloader with HTC Dev? You should have adb setup already. It's just running the right commands.
Sent from my HTCEVOV4G using Tapatalk 2
I already unlocked my phone but S-ON is still active. I looked into the dirtyraccun method but it mentions to not flash a custom recovery. I already have TRWM and Viper Rom installed. What would be the best method for getting S-Off? I have the latest firmware.
bicycle_kick said:
I already unlocked my phone but S-ON is still active. I looked into the dirtyraccun method but it mentions to not flash a custom recovery. I already have TRWM and Viper Rom installed. What would be the best method for getting S-Off? I have the latest firmware.
Click to expand...
Click to collapse
Moonshine
Sent from my Eliptic Nexus 7
Been trying moonshine but after the 1st device reboot, ADB doesnt work right
bicycle_kick said:
Been trying moonshine but after the 1st device reboot, ADB doesnt work right
Click to expand...
Click to collapse
Make sure you have the latest HTC driver installed. Use a USB 2.0 port, make sure that HTC Sync is not installed on your computer, and that your computer antivirus is off.
You can get the latest driver in the link below. Use the HTC driver from post #2.
http://forum.xda-developers.com/showthread.php?t=2179776
Also, it may take a few attempts before Moonshine is successful. On the phone I recently Moonshined, it took a few tries before it succeeded, and I had everything set up correctly.
Sent from my EVO using xda premium
FinZ28 said:
Make sure you have the latest HTC driver installed. Use a USB 2.0 port, make sure that HTC Sync is not installed on your computer, and that your computer antivirus is off.
You can get the latest driver in the link below. Use the HTC driver from post #2.
http://forum.xda-developers.com/showthread.php?t=2179776
Also, it may take a few attempts before Moonshine is successful. On the phone I recently Moonshined, it took a few tries before it succeeded, and I had everything set up correctly.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I've been running into the same issues! It keeps getting stuck on the second step! I've been following all your suggestions you posted in my other thread as well. At least it got me to the second step in Moonshine.
All HTC drivers were removed and the new ones were reinstalled. Computer and phone rebooted, USB 2.0 port, etc... I even went to another PC and ran into the same problems. I'll try it some more since you said it took a few tries.
Edit: Now it won't establish a connection to complete the first step in fastboot even though the PC keeps making sounds when fastboot USB gets turned on
venkman21 said:
I've been running into the same issues! It keeps getting stuck on the second step! I've been following all your suggestions you posted in my other thread as well. At least it got me to the second step in Moonshine.
All HTC drivers were removed and the new ones were reinstalled. Computer and phone rebooted, USB 2.0 port, etc... I even went to another PC and ran into the same problems. I'll try it some more since you said it took a few tries.
Edit: Now it won't establish a connection to complete the first step in fastboot even though the PC keeps making sounds when fastboot USB gets turned on
Click to expand...
Click to collapse
Check PM.
Sent from my EVO using xda premium
FinZ28 said:
Check PM.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I'm so close FinZ! I just need to figure out how to run RabiesShot from a Windows machine (cmd prompt) - or is it possible to run it via Terminal Emulator on the phone?
Does anyone know how to run RabiesShot without Ubuntu?
venkman21 said:
I'm so close FinZ! I just need to figure out how to run RabiesShot from a Windows machine (cmd prompt) - or is it possible to run it via Terminal Emulator on the phone?
Does anyone know how to run RabiesShot without Ubuntu?
Click to expand...
Click to collapse
You have to use a live CD with Dirty Racun if you are running Windows. To answer your second question, no, you can't use terminal emulator on your phone, either. Please be careful with what you're doing, otherwise you risk having an expensive paperweight in your hand. Personally I would have gone the Moonshine route It's Windows friendly and you don't have to fool with any commands, other then checking device connection with ADB & fastboot.
Sent from my EVO using xda premium
FinZ28 said:
You have to use a live CD with Dirty Racun if you are running Windows. To answer your second question, no, you can't use terminal emulator on your phone, either. Please be careful with what you're doing, otherwise you risk having an expensive paperweight in your hand. Personally I would have gone the Moonshine route It's Windows friendly and you don't have to fool with any commands, other then checking device connection with ADB & fastboot.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Yeah I know. I'm being really careful with everything - reading up before I do ANYTHING. I've done this to several phones before, but never had this much trouble...
Do you know if it's possible to still use Moonshine at this point? I've gone through every single step for DirtyRacun except for #14 which is to run RabiesShot. I have the RUU for 3.15 HBOOT 2.09 installed and running fine right now. If I can use Moonshine (and actually get it to connect to the device now), I would rather do that.
venkman21 said:
Yeah I know. I'm being really careful with everything - reading up before I do ANYTHING. I've done this two several phones before, but never had this much trouble...
Do you know if it's possible to still use Moonshine at this point? I've gone through every single step for DirtyRacun except for #14 which is to run RabiesShot. I have the RUU for 3.15 HBOOT 2.09 installed and running fine right now. If I can use Moonshine (and actually get it to connect to the device now), I would rather do that.
Click to expand...
Click to collapse
You need to use Facepalm. Follow Bigdaddy's instructions towards the end of the thread in the link below.
http://forum.xda-developers.com/showthread.php?t=2337029
Sent from my EVO using xda premium
FinZ28 said:
You need to use Facepalm. Follow Bigdaddy's instructions towards the end of the thread in the link below.
http://forum.xda-developers.com/showthread.php?t=2337029
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Moonshine worked. My issue was I had to keep turning the USB off the HTC sync everytime the phone rebooted. Now I have S-OFF but my ROM issues still are taking place. Roms just won't boot and sit on loading screen
bicycle_kick said:
Moonshine worked. My issue was I had to keep turning the USB off the HTC sync everytime the phone rebooted. Now I have S-OFF but my ROM issues still are taking place. Roms just won't boot and sit on loading screen
Click to expand...
Click to collapse
Make sure you're doing a full system wipe in recovery prior to flashing the ROM. You also might want to try opening a command prompt in your ADB tools folder while in the bootloader and type the command "fastboot erase cache" (minus quotation marks) and hit enter. Make sure you're connected via fastboot USB first.
Sent from my EVO using xda premium
FinZ28 said:
Make sure you're doing a full system wipe in recovery prior to flashing the ROM. You also might want to try opening a command prompt in your ADB tools folder while in the bootloader and type the command "fastboot erase cache" (minus quotation marks) and hit enter. Make sure you're connected via fastboot USB first.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Issue resolved! Cheers!
bicycle_kick said:
Issue resolved! Cheers!
Click to expand...
Click to collapse
Care to elaborate it may help someone else
Sent from my Eliptic Nexus 7
Is there any way to get S-off if my dna's firmware is on 2.07? My original DNA pooted out on me and had a cracked screen so i bought a new one and i really want to get sense 5 back up and running. Is there any way to get S-off with it being on 2.07 or can I downgrade to 2.06? Thanks for any help!
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Moonshine works on 2.07
Sent from my HTC6435LVW using XDA Premium 4 mobile app
texaswickedtoys said:
Moonshine works on 2.07
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
are you sure? im running on a brand new hp Split x2 with windows 8, sdk and jdk installed (newest version) and i keep running moonshine and gives me an error that says, "error: please go back and READ". this may be a mistake on my part but i dont think i have done anything wrong. any ideas on that?
I'm sure it works my computer is windows 7 so I'm not sure on windows 8 compatibility
Sent from my HTC6435LVW using XDA Premium 4 mobile app
texaswickedtoys said:
I'm sure it works my computer is windows 7 so I'm not sure on windows 8 compatibility
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did it on _two_ DNAs with 2.07 in the last couple of weeks. The first one took some learning (turned out had to disable anti-virus in Win7), then it's a piece of cake.
i did mine last night was on 2.0.7 moonshine worked flawlessly
realestone said:
i did mine last night was on 2.0.7 moonshine worked flawlessly
Click to expand...
Click to collapse
were you on windblows 8 or 7?
planning on doing mine soon....
also, can this be done on a mac?
bigjew92 said:
were you on windblows 8 or 7?
planning on doing mine soon....
also, can this be done on a mac?
Click to expand...
Click to collapse
windows 7 64bit
texaswickedtoys said:
I'm sure it works my computer is windows 7 so I'm not sure on windows 8 compatibility
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Moonshine works fine on windows 8 with 2.07 just make sure adb/fastboot are up and running properly (open sdk manager and take any updates) factory reset from within stock Rom. then dl moonshine, unzip it (right click extract all) then run distiller from within the extracted folder.
Sent from my HTC6435LVW using xda app-developers app
---------- Post added at 02:15 PM ---------- Previous post was at 02:07 PM ----------
Also yes disable any antivirus you currently have running. thatll cause problems with distiller. Make sure you recheck usb debugging after factory reseting. And you know how to make sure adb/fastboot are running properly I assume? Also HTCsync needs to be UNINSTALLED from your comp.. I had to install it for it to install the HTCdna drivers then uninstall HTC syncmanager..
Sent from my HTC6435LVW using xda app-developers app
Woo!
Alright, good to know it works on 2.07, need my phone through the week so I'll be trying fri after work!
running moonshine on 2.07 DNA and it got through test 2, rebooted, and has playing dots on my screen for 20 minutes. phone is on fastboot screen
I pulled the plug, rebooted, did the same thing. Any help?
platypuss94 said:
are you sure? im running on a brand new hp Split x2 with windows 8, sdk and jdk installed (newest version) and i keep running moonshine and gives me an error that says, "error: please go back and READ". this may be a mistake on my part but i dont think i have done anything wrong. any ideas on that?
Click to expand...
Click to collapse
I was getting the same go back and read error. Re-installing the HTC Windows drivers solved the problem for me.
the hanging dots...... ....... ... ... ...
SDTalon said:
running moonshine on 2.07 DNA and it got through test 2, rebooted, and has playing dots on my screen for 20 minutes. phone is on fastboot screen
Click to expand...
Click to collapse
SDTalon said:
I pulled the plug, rebooted, did the same thing. Any help?
Click to expand...
Click to collapse
Mine was also passing the second test, no problems, and then hanging with all the dots...
The one thing i had failed to do was disable all of my avast antivirus... after hours of fighting, moonshine ran no problem, smooth as silk...
I guess thats what i get for not following all of the directions from the start
just my experience... and Verizon is already trying to stuff 2.08 down my throat, wanted to get this rooted before that
after running stock for 6 months, im pretty excited
windows 8
factory reset
2.07
usb 2.0
all antivirus disabled
htc sync uninstalled
XFiraga001 said:
Alright, good to know it works on 2.07, need my phone through the week so I'll be trying fri after work!
Click to expand...
Click to collapse
or you can update and use Rumrunner, it will s-off the newest ota's 3.x
2.07.605.1 with S-ON, LOCKED, TAMPERED
I jsut want to say my device was 2.07.605.1 with S-ON, LOCKED, TAMPERED and unrooted. Moonshine did the trick for me. Even though it states one the moonshine kit that it is for 2.06.
grilledcheesesandwich said:
I jsut want to say my device was 2.07.605.1 with S-ON, LOCKED, TAMPERED and unrooted. Moonshine did the trick for me. Even though it states one the moonshine kit that it is for 2.06.
Click to expand...
Click to collapse
Moonshine is for both 2.06 and 2.07
thayl0 said:
Moonshine is for both 2.06 and 2.07
Click to expand...
Click to collapse
Hmm must of miss that.
one thing i had problems with was moonshine hanging after reboots when moonshine is doing its thing. I dont know if this has been stated before but what worked for me was I quickly uncheck and check usb debugging and the problem is resolved. moonshine started working again.
Its been 7 hours, time to ask for help. My wife cracked her rezound so bought one on Ebay. Both of us have had rooted rezounds for about 2 years (both s-off), keep getting "can't find a seat", install device and drivers", and "critical error" messages while trying juopunut (however you spell it) s-off. Have installed: HTC sync, adb manager (SDK blah blah blah), and all the "all in one tools" I can find. Going crazy. Currently unlocked bootloader, AmonRa, and installed super Su. Phone is stock as hell and still on gingerbread (scared to update to ics through verizon ota update cause i dont trust verizon or their firmware. I am totally lost. Please help.
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Ohschit said:
Its been 7 hours, time to ask for help. My wife cracked her rezound so bought one on Ebay. Both of us have had rooted rezounds for about 2 years (both s-off), keep getting "can't find a seat", install device and drivers", and "critical error" messages while trying juopunut (however you spell it) s-off. Have installed: HTC sync, adb manager (SDK blah blah blah), and all the "all in one tools" I can find. Going crazy. Currently unlocked bootloader, AmonRa, and installed super Su. Phone is stock as hell and still on gingerbread (scared to update to ics through verizon ota update cause i dont trust verizon or their firmware. I am totally lost. Please help.
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
refer to my s-off guide here in the rezound q&a forums...the windows version.which im assuming your trying to use was ONLY meant for ICS and was removed because the windows version hard bricked one too many devices
Edit: as you are on gingerbread that too was produced by verizon and htc....same as pure stock ics....you can also get a non verizon sense based ics rom on here which runs much better than verizons gingerbread or ics
You think it would be easier to s-off with or without taking the OTA update?
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Ohschit said:
You think it would be easier to s-off with or without taking the OTA update?
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You don't really have a choice here... You have Amon Ra (a custom recovery) so even if you take the OTA it won't install, OTA updates require a stock recovery.
The Windows S-OFF method will only work with ICS (there was no GB version), so you could install the 3.14.605.12 RUU first (this will give you a stable ICS version installed), but with the messages you are getting it sounds like you have a driver or USB issue, or perhaps Fastboot enabled (not the same as fastboot from the bootloader) or USB Debugging not turned on.
Be very cautious with the Windows ControlBear, @REV3NT3CH is correct, it was removed because it bricked a lot of phones, it was never stable... it works for most people, but there are circumstances that if put together correctly will brick you device permanently. You could try the Linux method, it is the only official way and there is a GB version on http://unlimited.io/juopunutbear.htm that will work with your device.
TBH, I'd not even bother. I'd look into seeing why ADB/Fastboot doesn't work right. First I'd uninstall HTC Sync (should have been called HTC Stync LOL).
acejavelin said:
You don't really have a choice here... You have Amon Ra (a custom recovery) so even if you take the OTA it won't install, OTA updates require a stock recovery.
The Windows S-OFF method will only work with ICS (there was no GB version), so you could install the 3.14.605.12 RUU first (this will give you a stable ICS version installed), but with the messages you are getting it sounds like you have a driver or USB issue, or perhaps Fastboot enabled (not the same as fastboot from the bootloader) or USB Debugging not turned on.
Be very cautious with the Windows ControlBear, @REV3NT3CH is correct, it was removed because it bricked a lot of phones, it was never stable... it works for most people, but there are circumstances that if put together correctly will brick you device permanently. You could try the Linux method, it is the only official way and there is a GB version on http://unlimited.io/juopunutbear.htm that will work with your device.
Click to expand...
Click to collapse
Okay, well, here is where I get confused. When I s-off'd 2 years ago it was on gingerbread and I still have the old juopunutbear program so in theory everything should be the same. To my knowledge, I can't figure out a way to toggle debugging on GB. Oh, can anyone link me to (literally) from start to finish, every single download I will need to successfully s-off given the specs that I've provided that I'm working with? I would appreciate it more than you know because I must be doing something wrong. Thanks!!
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
If I may chime in...
Would it be okay if I were to dualboot a Linux image on my Windows PC to perform S-OFF? There wouldn't be any command errors or extra precautions, right?
Ohschit said:
Okay, well, here is where I get confused. When I s-off'd 2 years ago it was on gingerbread and I still have the old juopunutbear program so in theory everything should be the same. To my knowledge, I can't figure out a way to toggle debugging on GB. Oh, can anyone link me to (literally) from start to finish, every single download I will need to successfully s-off given the specs that I've provided that I'm working with? I would appreciate it more than you know because I must be doing something wrong. Thanks!!
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
USB Debugging in GB is under Settings, Applications, Development if I recall right.
Sent from my Nexus 4 using Tapatalk
OK, so it would have worked if I did the wire trick right but I failed. Now I'm stuck at juopunutbear arrow screen however, I can still get into fastboot. Now what?
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
kcipopnevets said:
Would it be okay if I were to dualboot a Linux image on my Windows PC to perform S-OFF? There wouldn't be any command errors or extra precautions, right?
Click to expand...
Click to collapse
yes its ok to dualboot...thats my setup and works fine...i suggest using 32 bit version of linux as that is what is recommended....my guide on here gives perfect step by step instructions for it
I think(needs clarification) you have to fastboot flash boot.img, boot back into rom and try again.
Ohschit said:
OK, so it would have worked if I did the wire trick right but I failed. Now I'm stuck at juopunutbear arrow screen however, I can still get into fastboot. Now what?
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
try a different wire....ive seen a few rezounds where its gotten stuck on jpbear arrow screen and renders it permanently BRICKED
Edit: again this only happens on windows....should of followed my guide bud
I will be honest, I have used the Windows utility every time, it hasn't failed me yet, once I have gotten to that point and the wire trick failed, it should continue to prompt you to do the trick or tell you what to do... Just run ControlBear again, it should take you to the point where you do the wire trick again, if not, look at the ControlBear Troubleshooting page on unlimited.io
It says s-off but bootloader is locked now in fastboot and when I try to boot up I get juopunutbear arrow screen. Shoot me!
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Ohschit said:
It says s-off but bootloader is locked now in fastboot and when I try to boot up I get juopunutbear arrow screen. Shoot me!
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Actually, you are almost there... if you are stuck in Fastboot, try this from step #2, remember you are in Windows, so you might have to copy files into and issue the commands from the appropriate directory instead of using "sudo":
There are three ways to recover your ROM. Try each one in until you succeed:
Open the cmd prompt that is located in your ControlBear folder where you unzipped all of the files.
Type the following cmds into the cmd prompt.
1. ControlBear -r (This is run with the phone at the JuopunutBear/Arrow screen) If this succeeds recovery is complete otherwise continue to Step 2.
2. ControlBear -f (This is run with the phone at the fastboot screen). If this succeeds you're done otherwise continue to Step 3.
3. fastboot flash boot boot_backup.img
4. fastboot flash recovery recovery_backup.img (This is done with the phone in fastboot mode) If this succeeds continue to Step 5.
5. Boot the phone to android and install busybox from the market if not already installed.
6. sudo ./adb push sdcard.img /data/local/tmp/
7. sudo ./adb shell
8. $ su
9. # busybox dd if=/data/local/tmp/sdcard.img of=/dev/block/mmcblk1 conv=notrunc
10. Reboot the phone.
Click to expand...
Click to collapse
Sweet! I'm unlocked, rooted, and s-off! Last thing, how do I safely get her updated to ICS so I can flash tachyon on her phone and be done?
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Ohschit said:
Sweet! I'm unlocked, rooted, and s-off! Last thing, how do I safely get her updated to ICS so I can flash tachyon on her phone and be done?
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
grab the this 1st and the the this 3rd in my downgrade upgrade guide....the this first is latest ics with hboot 2.27 and radios....the this 3rd is the latest hboot 2.28 and radios only....anything higher than ics (tachyon is jellybean) works better and no overheats on that hboot...it will not mess with your s-off....also dont forget while using jellybean roms ONLY flash with cwm 6.0.3.6 or twrp 2.6.3.0 and be sure you do thorough cleaning or youll get a bad flash
REV3NT3CH said:
grab the this 1st and the the this 3rd in my downgrade upgrade guide....the this first is latest ics with hboot 2.27 and radios....the this 3rd is the latest hboot 2.28 and radios only....anything higher than ics (tachyon is jellybean) works better and no overheats on that hboot...it will not mess with your s-off....also dont forget while using jellybean roms ONLY flash with cwm 6.0.3.6 or twrp 2.6.3.0 and be sure you do thorough cleaning or youll get a bad flash
Click to expand...
Click to collapse
I don't mean to be a pain man but can you link me to the necessary files and spoon feed me what to do? I'm not screwing anything else up tonight!
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Ohschit said:
I don't mean to be a pain man but can you link me to the necessary files and spoon feed me what to do? I'm not screwing anything else up tonight!
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2509770 its the guide posted directly below this thread....Its in part 2b of the guide..only grab the this 1st and this 3rd ph98img file and flash through bootloader...the rest of the explanation is in the guide
REV3NT3CH said:
http://forum.xda-developers.com/showthread.php?t=2509770 its the guide posted directly below this thread....Its in part 2b of the guide..only grab the this 1st and this 3rd ph98img file and flash through bootloader...the rest of the explanation is in the guide
Click to expand...
Click to collapse
Will do. Why not the second one? Oh, and if I want to upgrade the radios for my rezound running tachyon should i only do 1 and 3 as well?
Sent from my Rezound on Tachyon using XDA Premium 4 mobile app