I am facing a very weird issue. When I try to shut down my phone, it just wont. It keeps restarting, I tried terminal commands too but they dont work either. I removed the battery but as soon as I insert it, it boots automatically -____-
Someone help me out here?
What rom or firmware version, what kernel, what were you doing or installing if anything when you started having this problem. ....the more info the better.
Baseband- Uchk7
Rom- Aokp 4.2.1 Task650
Kernel- Siyah 7.0.6
I'm assuming you've already tried redownloading the Rom a full wipe, reinstall?
I have man. I have had this problem with multiple ROMS. IT JUST WON'T POWER OFF. what the fish?!
Lostboy2909 said:
I have man. I have had this problem with multiple ROMS. IT JUST WON'T POWER OFF. what the fish?!
Click to expand...
Click to collapse
I made this awesome flow chart
It may be the kernel. In the siyah thread, he said he's released a new kernel that fixes the problem with not charging with power off (which may relate to your issue?). How about downloading the newest version of the kernel, boot into recovery, wipe everything, reinstall the Rom of your choice, go into advanced options in recovery and reboot into recovery and wipe cache and dalvik,then flash the new siyah kernel,then go to advanced options in recovery and reboot into recovery and reset the extweaks profiles under kernel options, then boot up the phone. Then try shutting it down and plug in the charger and see what happens? Sorry if this doesn't help, but hopefully it does. Good luck brotha.
Related
I recently got a galaxy player 5 international with froyo. I rooted it with no problems, but when I tried to flash a kernel with cwm recovery it would get stuck in a boot loop unless i went into the cwm recovery mode. I noticed that the kernel I used, rumirand's r14, was based off of GB and thought that might be my problem. I tried updating my firmware to GB using WT Ho's custom rom, and now it just hangs on the samsung logo, but I can still get into cwm. I made sure to wipe both caches and wipe data before installing the rom. Is this fixable or have I turned it into an expensive paperweight?
Did you try a factory reset?
I am not expert but i tried the same with R14 kernel and bricked but done the same with R13 and it worked .
Chris4evernoob said:
Did you try a factory reset?
Click to expand...
Click to collapse
Now or before installing the rom? I did a factory reset before installing, but I haven't done one since.
DZonikg said:
I am not expert but i tried the same with R14 kernel and bricked but done the same with R13 and it worked .
Click to expand...
Click to collapse
I just flashed the R13 kernel, but I'm still in the same situation.
Instead of flashing a new kernel there should be factory reset option on the first set you have or in "mounts and storage"
I had this problem once and I managed to solve it flashing a full rom (like 2.3.5 rooted and with rj kernel). It seems some users are having problems when flashing only the kernel. After you solve the problem, flash back group rom.
I just tried the rom+kernel. It said it was successful but it must not have been because it was hanging on boot again, and now it won't respond to the power button. If I plug it in to the computer it gets an image of a battery turns off and repeats.
jnmaster said:
I just tried the rom+kernel. It said it was successful but it must not have been because it was hanging on boot again, and now it won't respond to the power button. If I plug it in to the computer it gets an image of a battery turns off and repeats.
Click to expand...
Click to collapse
Can you go back to CWM after flashing rom+kernel? If yes, usually it is a matter of wiping the data and Dalvik cache. Which ROM+Kernel did you flashed?
WT Ho said:
Can you go back to CWM after flashing rom+kernel? If yes, usually it is a matter of wiping the data and Dalvik cache. Which ROM+Kernel did you flashed?
Click to expand...
Click to collapse
No, I'm not able to get a response from the power button.
I used the ROM + kernel you posted http://forum.xda-developers.com/showthread.php?t=1446774
So obviously i didn't do enough research before i started playing with my phone, and i'm sorry if my question has been asked a hundred times but i have done alot of reasearch and i still can't get it to work.
I succesfully installed a custom rom some months ago (resurection i think) and i wasn't happy with it (some bugs). So i wantet to install FOXHOUND Revolver Ocelot but then weird things started to happen. It all ended with a boot loop but i got it back to normal thanks to the sticky (http://forum.xda-developers.com/showthread.php?t=1457458). Now i have tried to install various CWM.tar via Odin so i can flash FOXHOUND Revolver Ocelot (http://forum.xda-developers.com/showthread.php?t=1162715). But everytime i try to install CWM it just hangs at boot screen with the yellow triangle and doesn't go any further. If i press Vol up + home + lock the phone restarts to the same boot screen and it stays there. If i shut off the phone it reboots and hangs at the boot screen.
So my question is really, from the point i'm at now (fixed brick with the aforementioned sticky) what should i do? Install a different kernel? (suggestion?) ROM manager (which?), root and then flash FOXHOUND Revolver Ocelot?
This is the info from About phone after i have followed the sticky to unbrick phone, if its interesting:
Model Number: GT-I9100
Android version: 4.0.3
Baseband version: I9100XXLPH
Kernel version: 3.0.15-I9100XXLPH-CL118559 [email protected]#3
Build number: IML74K.XXLPH
Try flash kernel via Odin for example syiah its good kernel ans that should fix when u flash go to cwm vol up+home+pwr button and wipe delvik and fix permission and boot
Sent from my GT-I9100 using xda premium
stopro said:
Try flash kernel via Odin for example syiah its good kernel ans that should fix when u flash go to cwm vol up+home+pwr button and wipe delvik and fix permission and boot
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thanks for the help. I tried to flash the siyah kernel via Odin, and I got a pass and all seemed good. I reboot my phone, SGSII bootscreen, then siyah bootscreen, then black and nothing. Tried multiple times. Booted into recovery and wiped dalvik and fixed permissions. Same thing still. This also happened when i tried to flash the Dorimanx kernel yesterday.
Am I doing something wrong?
MajorWobble said:
Thanks for the help. I tried to flash the siyah kernel via Odin, and I got a pass and all seemed good. I reboot my phone, SGSII bootscreen, then siyah bootscreen, then black and nothing. Tried multiple times. Booted into recovery and wiped dalvik and fixed permissions. Same thing still.
Am I doing something wrong?
Click to expand...
Click to collapse
in recovery try wiping cache partition then Dalvik cache after that do fixpermission then reboot system and see
Sun90 said:
in recovery try wiping cache partition then Dalvik cache after that do fixpermission then reboot system and see
Click to expand...
Click to collapse
Didn't work. But i had the rom on the sdcard so just went to recovery and installed in, now it works. So i don't quite now what the problem was, but when I installed the Revolver ROM all is working.
Thanks for the help guys, really appreciate it.
Hi, I am here because i need your help.
The problem is that, when I flash the cmx10 kernel, and then boot the phone, The logo flashes quickly and then disappear, then my leds become purple, and then, black screen.
I don't know why, I have this problem with v13 and v14(probably the other ones) , I tried everything, access to the recovery by spamming the back button, spamming volume up and down, but nothing happened.
Thanks for helping me.
facile12345 said:
Hi, I am here because i need your help.
The problem is that, when I flash the cmx10 kernel, and then boot the phone, The logo flashes quickly and then disappear, then my leds become purple, and then, black screen.
I don't know why, I have this problem with v13 and v14(probably the other ones) , I tried everything, access to the recovery by spamming the back button, spamming volume up and down, but nothing happened.
Thanks for helping me.
Click to expand...
Click to collapse
1. Flash CM9 kernel first with flash tool
2. Flash CMX10 rom,after done do not reboot
3. Pull out you battery,5 -10 second before inserting back
4. Flash CMX10 kernel and reboot
5.Done !!
_bacok said:
1. Flash CM9 kernel first with flash tool
2. Flash CMX10 rom,after done do not reboot
3. Pull out you battery,5 -10 second before inserting back
4. Flash CMX10 kernel and reboot
5.Done !!
Click to expand...
Click to collapse
Thank you very much, I'll try
But the install of the rom will work with the cm9 kernel ?
facile12345 said:
Thank you very much, I'll try
But the install of the rom will work with the cm9 kernel ?
Click to expand...
Click to collapse
cm9 kernel not working on JB rom
_bacok said:
cm9 kernel not working on JB rom
Click to expand...
Click to collapse
I missreaded, Again, I mean, err if i can install the jb rom with the cm9 kernel ? and your instructions seems a bit dangerous :/
If fail i can always get back by reinstalling the old rom and the kernel ?
did the solution help? I've got the same problem. Although i'm not totally new to flashing different roms and never had a problem. But this time i've got the same error (bootlogo shows up, 3 times blinking blue led and after that the logo disappears and the screen turns black. Nothing happens and xrecovery isn't available by pressing "back"-button)
If you're already on cm9 kernel, you can directly flash JB ROM
1. Boot into CWM recovery(by pressing the back key repeatedly when you see kernel logo & notification led)
2. Perform a full wipe (wipe data/factory rest, wipe cache partition & advanced > wipe dalvik cache)
3. Install JB ROM & if Google Apps is not yet included in your ROM install that too without rebooting
4. After that do NOT reboot, while still in CWM recovery, take your battery off >> wait 10 seconds & put it back again
5. Flash cm10 kernel using Flashtool then reboot.
facile12345 said:
I missreaded, Again, I mean, err if i can install the jb rom with the cm9 kernel ? and your instructions seems a bit dangerous :/
If fail i can always get back by reinstalling the old rom and the kernel ?
Click to expand...
Click to collapse
Flash cm9 kernel first is just to get worked recovery to flash cm10 rom. After flash cm10 rom using cwm recovery in cm9 kernel, without booting the phone pull the battery out and wait, insert battery back and flash cm10 kernel.
Sent from my Xperia X10 using xda app-developers app
Damn, I totally forgot that topic, Sorry x)
Well I tried but it didn't work, always same problem
Edit : It works with fera kernels, thanks.
I have a Galaxy S2 intl version. I was on carbon rom with siyah kernel. All was fine then suddenly it force reboots. but while rebooting it just didn't happen. Nothing happened. The screen logo just flashes for a second and then disappears, and then nothing happens. I tried entering the recovery mode, but doesn't enter the recovery mode. The download mode is working just fine. So I flashed a custom rom with siyah kernel using ODIN, hoping it would help, but nothing seems to happen though both rom and kernel are flashing perfectly alright! Please help me recover my phone guys. Would be extremely grateful, please!
Don't use siyah on custom roms. Flash Dorimanx 9.xx through odin . Recovery should now work. Go into recovery and factory reset clear the caches and reboot. Should work fine after this.
Remember
Dorimanx 8.xx is for stock and custom rom
Dorimanx9.xx is for custom only.
andrewwright said:
Don't use siyah on custom roms. Flash Dorimanx 9.xx through odin . Recovery should now work. Go into recovery and factory reset clear the caches and reboot. Should work fine after this.
Remember
Dorimanx 8.xx is for stock and custom rom
Dorimanx9.xx is for custom only.
Click to expand...
Click to collapse
Okay so I left my phone overnight, with the battery pulled out. I had flashed a stock rom before going to sleep. And i woke up and just put the battery back in to flash Dorimanx, and, something happened. The phone entered recovery mode :cyclops: I had been trying to get in the damn thing for the whole day yesterday, and today it happened, so i did as you said, wiping all that, and rebooted the phone. In a little odd fashion though, but it booted up and the setup process started, and it's working fine now. So, now I'm on a custom rom JB 4.1.2 and siyah kernel. I want a stable 4.3 on my phone. What can I do, sir? I dont wanna run into trouble again, so what would be a safe way?
emviveem said:
Okay so I left my phone overnight, with the battery pulled out. I had flashed a stock rom before going to sleep. And i woke up and just put the battery back in to flash Dorimanx, and, something happened. The phone entered recovery mode :cyclops: I had been trying to get in the damn thing for the whole day yesterday, and today it happened, so i did as you said, wiping all that, and rebooted the phone. In a little odd fashion though, but it booted up and the setup process started, and it's working fine now. So, now I'm on a custom rom JB 4.1.2 and siyah kernel. I want a stable 4.3 on my phone. What can I do, sir? I dont wanna run into trouble again, so what would be a safe way?
Click to expand...
Click to collapse
I am installing the Carbon Rom, JB 4.3 as I already have a copy of it on my phone, and I'm doing it with the same previous kernel on it, ie, Siyah-s2-v5.0.1. Should this create a problem?
Yes it will. DONT USE SIYAH. Use dorimanx 9.xx for any custom rom. Including carbon rom
andrewwright said:
Yes it will. DONT USE SIYAH. Use dorimanx 9.xx for any custom rom. Including carbon rom
Click to expand...
Click to collapse
Okay now I'm really sorry it's starting to bug you but my phone seems to develop new problems every time I reboot. Now, I havent changed anything, On a stock rom with siyah kernel. and i rebooted, and stuck again! I am able to enter recovery mode though (CWM recovery) and download mode also. BUT, now what happens when I boot is, the samsung logo shows with the triangle and, the boot tune plays but there's nothing on the screen, it's just black, and a few secs later, it gives a small vibration, all still with the phone screen black. Later i get to know that my phone has apparently turned on, but the screen is not showing anything. I called my cell and to my surprise it rings meaning its actually ON!! Why is the screen not ON then?? Please help, kind sir! Also if you could provide me with links to the required kernels/roms or whatever else required. Eagerly awaiting your saviour reply! :crying:
You need to go bk to stock with Odin. Test and see if it still happened with fully stock rom and kernel.
andrewwright said:
You need to go bk to stock with Odin. Test and see if it still happened with fully stock rom and kernel.
Click to expand...
Click to collapse
Hey, problem solved now, dont know what it was though! What i did was flash the Carbon rom with siyah, and it booted and then i flashed dorimanx and its working fine now. But the gapps package is reacting weirdly. I flashed it perfectly and when i reboot, it says "Google + stopped working" and then i check the app menu and there's no google apps whatsoever. http://goo.im/gapps/gapps-jb-20130813-signed.zip I then installed play store apk and it opened up and looked fine but then that is all it did! It won't download anything. What shall I do?
Full wipe. So format
Data
System
Preload
Cache
Dalvik cache
Then flash
Rom and gapps
Then flash dori
Then reboot
andrewwright said:
Full wipe. So format
Data
System
Preload
Cache
Dalvik cache
Then flash
Rom and gapps
Then flash dori
Then reboot
Click to expand...
Click to collapse
I did everything! I never got the option to format preload though. Everything else went smooth. Rebooted. Same problem persists.
Go bk to recovery and factory reset. Also maybe if that don't work redownload gapps and try again. May have curupt gapps.
emviveem said:
I did everything! I never got the option to format preload though. Everything else went smooth. Rebooted. Same problem persists.
Click to expand...
Click to collapse
And to top it all off, long pressing the home button refuses to bring up the recent apps/multitasking facility now. The notification bar doesn't work.
What nightly of carbon are you on?
Edit: also format pre load must be there? Mounts and storage. under format system I think.
andrewwright said:
What nightly of carbon are you on?
Edit: also format pre load must be there? Mounts and storage. under format system I think.
Click to expand...
Click to collapse
How do I check to tell which nightly I am on? And the first time I had done the full format, i had preload, and while i foramtted that, it gave me some error saying it couldnt do so. I completed the procedure anyways, availing no success. So, repeated it second time and found no preload option. The recovery menu seems to have changed. Is it a matter of concern? I am on a CWM recovery, apparently. and i found the preload option. tried. it says "Error foramtting /preload" how should i proceed?
Okay this is what I'm using "CARBON-JB-NIGHTLY-20131018-0102-i9100" Please help! I've run into more problems than I had anticipated! I am so worried. What should I do now?
emviveem said:
Okay this is what I'm using "CARBON-JB-NIGHTLY-20131018-0102-i9100" Please help! I've run into more problems than I had anticipated! I am so worried. What should I do now?
Click to expand...
Click to collapse
Sir, please reply. I'm sincerely apologize if I'm coming across as impatient but I'm **** scared. Please tell me how to proceed now..:crying:
Download 11/10 nightly and Dori 9.41.
Preload not formatting is worrying mate. Flash them and get bk to me
Try gapps for jb 4.3. It will surely work.
Sent from my GT-I9100 using xda app-developers app
20130810 is 4.3 isn't it? I'm sure it is.
andrewwright said:
Download 11/10 nightly and Dori 9.41.
Preload not formatting is worrying mate. Flash them and get bk to me
Click to expand...
Click to collapse
I am not able to locate the download links. Could you please do it for me?
Hi, i was charging my i9100 via USB. Tried to turn on the screen and the phone reboots.
Now, i am in bootloop. Can't access recovery mode. But can into download mode.
So i flashed different ROMs via ODIN and always bootloop. Tried with the last stock ROM and a branded ROM, and also flashed dorimanx kernel.
Never boots, it only changes the animation on the start, but still in bootloop.
Any ideas?
I can go into recovery mode now, but still cant boot any ROM. Help!
lumiden said:
I can go into recovery mode now, but still cant boot any ROM. Help!
Click to expand...
Click to collapse
Go to recovery . Wipe data/factory reset and wipe cache . And then flash the rom from your sd card.
Good luck :thumbup:
lumiden said:
Hi, i was charging my i9100 via USB. Tried to turn on the screen and the phone reboots.
Now, i am in bootloop. Can't access recovery mode. But can into download mode.
So i flashed different ROMs via ODIN and always bootloop. Tried with the last stock ROM and a branded ROM, and also flashed dorimanx kernel.
Never boots, it only changes the animation on the start, but still in bootloop.
Any ideas?
Click to expand...
Click to collapse
First do multiple cache+dalvik cache clear and reboot to see if it helps else
Do a full wipe(data+cache+dalvik cache) and then proceed to flash a rom
Gud luck mate
Are you two having a competition to see who can repeat the other the most times or something ?
MistahBungle said:
Are you two having a competition to see who can repeat the other the most times or something ?
Click to expand...
Click to collapse
Nope didnt mean to
Was in hybrid mode and didnt see his post
Sorry if it offended you