Hi, I am here because i need your help.
The problem is that, when I flash the cmx10 kernel, and then boot the phone, The logo flashes quickly and then disappear, then my leds become purple, and then, black screen.
I don't know why, I have this problem with v13 and v14(probably the other ones) , I tried everything, access to the recovery by spamming the back button, spamming volume up and down, but nothing happened.
Thanks for helping me.
facile12345 said:
Hi, I am here because i need your help.
The problem is that, when I flash the cmx10 kernel, and then boot the phone, The logo flashes quickly and then disappear, then my leds become purple, and then, black screen.
I don't know why, I have this problem with v13 and v14(probably the other ones) , I tried everything, access to the recovery by spamming the back button, spamming volume up and down, but nothing happened.
Thanks for helping me.
Click to expand...
Click to collapse
1. Flash CM9 kernel first with flash tool
2. Flash CMX10 rom,after done do not reboot
3. Pull out you battery,5 -10 second before inserting back
4. Flash CMX10 kernel and reboot
5.Done !!
_bacok said:
1. Flash CM9 kernel first with flash tool
2. Flash CMX10 rom,after done do not reboot
3. Pull out you battery,5 -10 second before inserting back
4. Flash CMX10 kernel and reboot
5.Done !!
Click to expand...
Click to collapse
Thank you very much, I'll try
But the install of the rom will work with the cm9 kernel ?
facile12345 said:
Thank you very much, I'll try
But the install of the rom will work with the cm9 kernel ?
Click to expand...
Click to collapse
cm9 kernel not working on JB rom
_bacok said:
cm9 kernel not working on JB rom
Click to expand...
Click to collapse
I missreaded, Again, I mean, err if i can install the jb rom with the cm9 kernel ? and your instructions seems a bit dangerous :/
If fail i can always get back by reinstalling the old rom and the kernel ?
did the solution help? I've got the same problem. Although i'm not totally new to flashing different roms and never had a problem. But this time i've got the same error (bootlogo shows up, 3 times blinking blue led and after that the logo disappears and the screen turns black. Nothing happens and xrecovery isn't available by pressing "back"-button)
If you're already on cm9 kernel, you can directly flash JB ROM
1. Boot into CWM recovery(by pressing the back key repeatedly when you see kernel logo & notification led)
2. Perform a full wipe (wipe data/factory rest, wipe cache partition & advanced > wipe dalvik cache)
3. Install JB ROM & if Google Apps is not yet included in your ROM install that too without rebooting
4. After that do NOT reboot, while still in CWM recovery, take your battery off >> wait 10 seconds & put it back again
5. Flash cm10 kernel using Flashtool then reboot.
facile12345 said:
I missreaded, Again, I mean, err if i can install the jb rom with the cm9 kernel ? and your instructions seems a bit dangerous :/
If fail i can always get back by reinstalling the old rom and the kernel ?
Click to expand...
Click to collapse
Flash cm9 kernel first is just to get worked recovery to flash cm10 rom. After flash cm10 rom using cwm recovery in cm9 kernel, without booting the phone pull the battery out and wait, insert battery back and flash cm10 kernel.
Sent from my Xperia X10 using xda app-developers app
Damn, I totally forgot that topic, Sorry x)
Well I tried but it didn't work, always same problem
Edit : It works with fera kernels, thanks.
Related
I just rooted my X10 mini and trying to install MiniCM7.
I did followed the instruction as in this link-http://forum.xda-developers.com/showthread.php?t=1068553
Unlocked my bootloader, flash the firmware named-"E10_nAa-02_2.6.29-nAa-02.ftf" and press the back button repeatly once the logo screen appear. By the way, my logo screen is a crashed image, I think it's normal so I just continue.
Getting into CWM, I followed the instruction also. Backup, Factory Reset and installed the updated.zip and gapps.
Done all the installation, I select " reboot system now" ( I think that's the reboot right?)
THINGS COME WRONG HERE!
After reboot, crashed image logo screen again! I wait for around 30 seconds, it automatic reboot! Crashed image logo screen appear again.....
I still can boot into CWM but can't get into normal OS anymore.
Perhaps I've done something wrong during the process, but I did followed the step.
What can I do now?! I just want back my original OS now.
Can someone help me please?
Download and copy to sdcard the ROM MiniCM 2.0.7
Flash it via recovery
the distorted boot logo is normal
moedjs said:
Download and copy to sdcard the ROM MiniCM 2.0.7
Flash it via recovery
the distorted boot logo is normal
Click to expand...
Click to collapse
obviously he did that. also, it is 2.1.1, 2.0.7 is for stock kernel, and he has NAA custom kernel.
From what I see there you flashed NAA kernel v02, flash the newest one and try again.
Did you check the kernel was updated correctly? Try to reflash miniCM following the steps again, if your kernel is cracked and NAA kernel is installed correctly, you mustve missed a step during the rom installation. go through it again and let us know.
moedjs said:
Download and copy to sdcard the ROM MiniCM 2.0.7
Flash it via recovery
the distorted boot logo is normal
Click to expand...
Click to collapse
Do i need to Wipe data or do anything before flash?
Wipe data/factory reset after you flash the ROM. Then flash gapps.
And BTW, nAaKernel-03 is out. (Go here). You should use that with MiniCM7-2.1.1.
Hope it helps!
Best,
Sam
kszai said:
Do i need to Wipe data or do anything before flash?
Click to expand...
Click to collapse
Just wipe the phone (factory reset), no need to flash gapps..
You just wanna see your phone revives again
After it's ok, then you can flash the MiniCM7 2.1.1 again and together with gapps of course, but before you flash Minicm7 2.1.1 you have to wipe the phone first
after flash the ROM and the gapps..isit select "reboot system now" to reboot? ><
kszai said:
after flash the ROM and the gapps..isit select "reboot system now" to reboot? ><
Click to expand...
Click to collapse
Yes. Reboot = restart.
If you think reboot = factory reset, then no.
Wipe = Factory reset.
On button + Home button also can reboot..so I don't know which to use..><
I tried to flash MiniCM7 2.0.7 but it say the baseband is not compatible with the ROM..update baseband to : M76XX-TSNCJOLYM-53404015.
what to do now? ><><><
anyway thanks for helping me..
kszai said:
On button + Home button also can reboot..so I don't know which to use..><
I tried to flash MiniCM7 2.0.7 but it say the baseband is not compatible with the ROM..update baseband to : M76XX-TSNCJOLYM-53404015.
what to do now? ><><><
anyway thanks for helping me..
Click to expand...
Click to collapse
To update baseband update via PC companion. if that does not fix it, look for a tutorial to flash custom firmware with baseband 015, there are quite a few on the forums.
Why press 2 buttons to reboot when you can press only one? youre overcomplicating things.
Isit what in this link? -> http://forum.xda-developers.com/showpost.php?p=9067949&postcount=1
So which one should I flash? And my Mini still in the situation that stuck on distorted logo, only able to boot into recovery, nothing else I can do.
Personally I wouldnt just give up after what you've allready done.
Your phone is in no danger. I've been in your position lots of times.
Since you are able to enter the CWM menu,
just try to reinstall 2.1.1 again, wipe everything, install gapps, and try again.
I would recomment kernel 03 instead of 02 tho, but it isnt needed to get 2.1.1 to work.
Also, when following this:
"Once the logo appears, press the back button repeatedly to enter CWM4.x.
- Select 'backup and restore -> Backup'
- Select 'wipe data/factory reset' (SUGGESTED)
- Select 'apply update from sdcard'
- Flash gapps"
Instead of "- Select 'apply update from sdcard' "
Select a custom .zip (not update.zip, but find the CM7 2.1.1.zip file on your SD-Card).
Then do the rest.
hope you get it working
Good to see solutions to your problem, but please post in general or faq in future. Please report your own post (I think you can) and select "move thread" or something like that.
Sent from my X10mini using XDA App
i m also flashed with update.zip after reboot hang on sony ericsson text and nothing happened all time same error
plz help seniors members
yusufali786 said:
i m also flashed with update.zip after reboot hang on sony ericsson text and nothing happened all time same error
plz help seniors members
Click to expand...
Click to collapse
read two posts above you.
Try it.
Was in the same boat until I flashed NaA Kernel-02 , everything was fine after that.
My phone's rooted. I've read almost every thread trying to resolve my problem. I restored it to stock firmware, tried overclocking it and still no luck of resolving my screen from blacking out and leaving just the buttons lighting up. Like the other thread, i just pull out my battery to fix things but it's quite irritating to do that everytime. It happens almost 5 times a day at a random time. Can someone please help me resolve this? I'm not using any custom rom or anything.
which ROM u r using??
Optimus one
CM 6.5.8
Press THANKS if I helped...
loserkid520 said:
My phone's rooted. I've read almost every thread trying to resolve my problem. I restored it to stock firmware, tried overclocking it and still no luck of resolving my screen from blacking out and leaving just the buttons lighting up. Like the other thread, i just pull out my battery to fix things but it's quite irritating to do that everytime. It happens almost 5 times a day at a random time. Can someone please help me resolve this? I'm not using any custom rom or anything.
Click to expand...
Click to collapse
I think this is only a software problem; try flashing miks rom if you want stability, or adfad's for new features. I have not got this bug on nightly6 but the rom isnt fully working
I'm just using a stock firmware from a thread here on how to restore to stock firmware without kdz update. I'm a noob to android so i don't know how to put any ROM yet.
If you use stockROM Froyo (2.2.X) your problem could be solve with an update to Gingerbread (2.3.3). Other causes are poor quality microsd or modified kernel (i.e. Unofficial CM)
Enviado desde mi LG-P500h usando Tapatalk
loserkid520 said:
I'm a noob to android so i don't know how to put any ROM yet.
Click to expand...
Click to collapse
For stockROM I use KDZ Firmware Updater, for custom ROMs you need root and install a custom recovery, then, you can install any custom ROM.
Enviado desde mi LG-P500h usando Tapatalk
Rores said:
I think this is only a software problem; try flashing miks rom if you want stability, or adfad's for new features. I have not got this bug on nightly6 but the rom isnt fully working
Click to expand...
Click to collapse
Can you get me a link on those roms or tutorial? I'm still a noob at android.
loserkid520 said:
Can you get me a link on those roms or tutorial? I'm still a noob at android.
Click to expand...
Click to collapse
As your phone is rooted..
1. install ROM manager from market and install recovery from it... make sure you select the correct phone
2. DO NOT CHOOSE TO BOOT INTO RECOVERY VIA ROM MANAGER OR YOUR PHONE WILL GET STUCK...
3. If you are on gingerbread then you are using new baseband otherwise on froyo its old..
4. go to optimus one development section and choose the stable ROM according to your baseband..
5 download it and place it on sd card
6. Also download GAAPS and place it on sd card
7. turn off the phone and boot into recovery by holding home+ volume down+ power and hold then until you see recovery
8. use volume keys to navigate in recovery, back to go back and menu key to make selection
9. now wipe data/ factory reset,
wipe cache, wipe dalvik cache and wipe battery stats..(last two are under advanced options)
also go to mount and storage and format system if you want perfectly clean install
10. now choose install zip from sd card and choose the ROM you downloaded... let it complete and after that reboot phone
11. first boot will take time.. don't panic.. after it is started again boot into recovery and install GAAPS to get market and other google apps.. reboot and you are ready to go..
NOTE:- NEVER FLASH 2 ZIPS WITHOUT REBOOTING
NEVER DO FACTORY RESET FROM PHONE WHILE USING CUSTOM ROM.. DO IT FROM RECOVERY..
I hope this will do..
Optimus one
CM 6.5.8
Press THANKS if I helped...
fundoozzz said:
As your phone is rooted..
1. install ROM manager from market and install recovery from it... make sure you select the correct phone
2. DO NOT CHOOSE TO BOOT INTO RECOVERY VIA ROM MANAGER OR YOUR PHONE WILL GET STUCK...
3. If you are on gingerbread then you are using new baseband otherwise on froyo its old..
4. go to optimus one development section and choose the stable ROM according to your baseband..
5 download it and place it on sd card
6. Also download GAAPS and place it on sd card
7. turn off the phone and boot into recovery by holding home+ volume down+ power and hold then until you see recovery
8. use volume keys to navigate in recovery, back to go back and menu key to make selection
9. now wipe data/ factory reset,
wipe cache, wipe dalvik cache and wipe battery stats..(last two are under advanced options)
also go to mount and storage and format system if you want perfectly clean install
10. now choose install zip from sd card and choose the ROM you downloaded... let it complete and after that reboot phone
11. first boot will take time.. don't panic.. after it is started again boot into recovery and install GAAPS to get market and other google apps.. reboot and you are ready to go..
NOTE:- NEVER FLASH 2 ZIPS WITHOUT REBOOTING
NEVER DO FACTORY RESET FROM PHONE WHILE USING CUSTOM ROM.. DO IT FROM RECOVERY..
I hope this will do..
Optimus one
CM 6.5.8
Press THANKS if I helped...
Click to expand...
Click to collapse
I'm going to try this. I just flashed my phone again to stock firmware this time a european version. If my screen still goes black, i'll try this out.
I first installed CM 10 nightly, didn't really like it, so I thought about restoring my old backup and going back to stock ROM, but, when I booted the phone, the logo came up then it rebooted.
Then I flashed Xperia Ultimate HD 2.0.3, Installation went fine, but the logo stayed for like 5 seconds then it went into a black screen, kinda abit blue'er than black.
The LED light went light blue.
What should I do now?
Thanks.
Fixed!
Finally, I managed to fix it.
I did this:
Locked bootloader: http://forum.xda-developers.com/showthread.php?t=1134335
Unroot with Flashtool.
Flashed boot.img from CM10.
Flashed 562 Android build. (or something :s)
And then the phone booted up. :laugh:
After/Before restoring your Backup, did you flash the right kernel for the software version?
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
After/Before restoring your Backup, did you flash the right kernel for the software version?
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
I bet he didnt
mihahn said:
After/Before restoring your Backup, did you flash the right kernel for the software version?
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
I forgot. xD
Anyways the ROM I flashed is better than the stock ROM.
Thanks anyways.
Sadra.. said:
I forgot. xD
Anyways the ROM I flashed is better than the stock ROM.
Thanks anyways.
Click to expand...
Click to collapse
Just for your information:
If you want to flash a new rom, you have to flash a kernel that's compatible. So you do it like this:
1. Push rom zip (and gapps if needed) to sdcard
2. Boot in cwm and do a backup
3. Flash the new kernel (in the zip or if you can choose one, watch out: there are kernels for GINGERBREAD or ICECREAMSANDWICH and use the right one )
4. Boot in cwm
5. Wipe data/factory reset, wipe cache, advanced -> wipe dalvik cache
6. Install zip from sd card -> choose the zip
Reboot and you've got it
I am facing a very weird issue. When I try to shut down my phone, it just wont. It keeps restarting, I tried terminal commands too but they dont work either. I removed the battery but as soon as I insert it, it boots automatically -____-
Someone help me out here?
What rom or firmware version, what kernel, what were you doing or installing if anything when you started having this problem. ....the more info the better.
Baseband- Uchk7
Rom- Aokp 4.2.1 Task650
Kernel- Siyah 7.0.6
I'm assuming you've already tried redownloading the Rom a full wipe, reinstall?
I have man. I have had this problem with multiple ROMS. IT JUST WON'T POWER OFF. what the fish?!
Lostboy2909 said:
I have man. I have had this problem with multiple ROMS. IT JUST WON'T POWER OFF. what the fish?!
Click to expand...
Click to collapse
I made this awesome flow chart
It may be the kernel. In the siyah thread, he said he's released a new kernel that fixes the problem with not charging with power off (which may relate to your issue?). How about downloading the newest version of the kernel, boot into recovery, wipe everything, reinstall the Rom of your choice, go into advanced options in recovery and reboot into recovery and wipe cache and dalvik,then flash the new siyah kernel,then go to advanced options in recovery and reboot into recovery and reset the extweaks profiles under kernel options, then boot up the phone. Then try shutting it down and plug in the charger and see what happens? Sorry if this doesn't help, but hopefully it does. Good luck brotha.
Hello,
I was trying to do a factory reset on my S2, and I noticed it doesn't delete my other files (Music, Photos, Etc.) but it does reset my apps installed. Because I want to totally erase my files, I went to recovery mode and did a wipe, and I think I may have wiped the data, system, dalvic, etc on the process. And now my phone wont boot up. It is stuck at the Siyah logo (Because I flashed siyah on it before and it was a success). After this, I tried to flash siyah again into my device and its still stuck. I dont know what to do anymore, I also tried factory resetting using recovery mode. I have flashed other kernels but it still doesn't work. BTW I am using a jelly bean device
Newbees said:
Hello,
I was trying to do a factory reset on my S2, and I noticed it doesn't delete my other files (Music, Photos, Etc.) but it does reset my apps installed. Because I want to totally erase my files, I went to recovery mode and did a wipe, and I think I may have wiped the data, system, dalvic, etc on the process. And now my phone wont boot up. It is stuck at the Siyah logo (Because I flashed siyah on it before and it was a success). After this, I tried to flash siyah again into my device and its still stuck. I dont know what to do anymore, I also tried factory resetting using recovery mode. I have flashed other kernels but it still doesn't work. BTW I am using a jelly bean device
Click to expand...
Click to collapse
did you fix permissions ?
slimlo said:
did you fix permissions ?
Click to expand...
Click to collapse
Sorry I'm nub, what is permissions? Can I find that on recovery mode?
Newbees said:
Sorry I'm nub, what is permissions? Can I find that on recovery mode?
Click to expand...
Click to collapse
yep in recovery mode
I found the fix permission Sir. Shall I flash again the kernel and do a fix permission?
Sir, it's still stuck at the Siyah logo
If you've formatted system as you say you will need to flash a rom, I'm running the latest neatrom lite, I'm confused by your post its 4am here
Sent from my GT-I9100 using Tapatalk 2
Hello sir, sorry if I disturbed your sleep XD no I did not flash a ROM. I just flashed a kernel using ODIN. Should I flash a ROM?
If I flash a new ROM, say the latest Snapdragon for S2 will the kernel be included in the package? I still cant pass the logo screen even though I have flashed different kernels
Newbees said:
If I flash a new ROM, say the latest Snapdragon for S2 will the kernel be included in the package? I still cant pass the logo screen even though I have flashed different kernels
Click to expand...
Click to collapse
the kernel is included most all roms doe and also make sure you follow all instructions on flashing properly... always make sure you do a backup )
gl
slimlo said:
the kernel is included most all roms doe and also make sure you follow all instructions on flashing properly... always make sure you do a backup )
gl
Click to expand...
Click to collapse
Thanks Sir Slim, I will try to flash the Snapdragon ROM as soon as after I finish downloading it. Because I believe I have cleared out the operating system and other important data on my device, that's why I need a new ROM.
Hi mate,
Do you run a stock ROM on your phone like you didnt flash any custom ROM on it....
Did you check if the SIYAH kernel you flashed on your device has STOCK ROM support, cause if the siya kernel you flashed has no support for stock rom it will just stay on the siyah logo the whole day until it drains out your battery.....
if you want to go to this website : http://dorimanx.shine.sk/ and dowload the v8.xxx those got stock rom support..... then do a wipe data factory reset....
if your phone booted up, and want to you wipe the phone completely, go to settings and do a factory reset there, your phone will prompt you if you want to wipe the memory card too.... put a check on it then follow the steps okay....
[email protected] said:
Hi mate,
Do you run a stock ROM on your phone like you didnt flash any custom ROM on it....
Did you check if the SIYAH kernel you flashed on your device has STOCK ROM support, cause if the siya kernel you flashed has no support for stock rom it will just stay on the siyah logo the whole day until it drains out your battery.....
if you want to go to this website : http://dorimanx.shine.sk/ and dowload the v8.xxx those got stock rom support..... then do a wipe data factory reset....
if your phone booted up, and want to you wipe the phone completely, go to settings and do a factory reset there, your phone will prompt you if you want to wipe the memory card too.... put a check on it then follow the steps okay....
Click to expand...
Click to collapse
Thank you sir! You are right that I did not have a custom ROM when I installed the Siyah kernel. Maybe that's the reason I was stuck
Newbees said:
Thank you sir! You are right that I did not have a custom ROM when I installed the Siyah kernel. Maybe that's the reason I was stuck
Click to expand...
Click to collapse
Nope it's not the right reasons may be you flashed a wrong siyah kernel.
Tell me your android version is it jellybean or ics
Sent from my GT-I9100 using xda premium