Related
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flush my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flushing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Donnie Sins said:
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Click to expand...
Click to collapse
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
appumohanty said:
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Click to expand...
Click to collapse
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
boki9999 said:
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
Click to expand...
Click to collapse
^^
But it should be possible through CWM...
Sent from the Matrix
Donnie Sins said:
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not flashing,
^^
But it should be possible through CWM...
Sent from the Matrix
Click to expand...
Click to collapse
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
appumohanty said:
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
Click to expand...
Click to collapse
have you tried flashing in download mode with odin?
boki9999 said:
have you tried flashing in download mode with odin?
Click to expand...
Click to collapse
no i will try it now and will let you know
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
appumohanty said:
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
Click to expand...
Click to collapse
Did you flash Siyah 5.0i?
boki9999 said:
Did you flash Siyah 5.0i?
Click to expand...
Click to collapse
i flash with latest 5.0.1, but i am getting black screen after after kernel booting,
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
alister91 said:
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
1. Siyah Kernal Odin version : Flash via Odin ( http://d-h.st/Bcf )
2. Enter into Siyah recovery and flash a compatibale ROM.
Done.
If you havent got a rom on your micro SD card
a) In siyah kernal mount USB storage.
b) Use an micro-sd reader to copy flashable zip
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately even dorimanx works .... you have to wait
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
http://db.tt/YceTd0pl flash a kernel cleaning script before you flash a new kernel
---------- Post added at 02:29 PM ---------- Previous post was at 02:25 PM ----------
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Siyah,Dorimanx kernel does not have a support yet in jb leaked xxlsj, but for sure they are working with it now..
Thanks A Lot
appumohanty said:
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
Click to expand...
Click to collapse
Thanks a lot man....had been searching around a lot for this...didnt wanna use odin... so was looking for a compatible siyah kernel...your post helped a lot....many thanks...
How to install dorimax kernel in neat ROM lite v4.1?..
corruptionfreeindia said:
How to install dorimax kernel in neat ROM lite v4.1?..
Click to expand...
Click to collapse
Dwnld and flash the Zip file of Dori ver 7.44 from recovery, then reboot ur phone
corruptionfreeindia said:
How to install dorimax kernel in neat ROM lite v4.1?..
Click to expand...
Click to collapse
Were three posts (this one, and these other two here and here) really necessary to ask a question that's probably answered in post 1 of the Dorimanx kernel thread?
I did..but it was not booting.. after the boot animation
Hi guys !
I'm new in this section, and my Galaxy S 2 is just rooted. Otherwise it's pure Samsung Rom.
I was looking for a way to install Omega Rom, but i'm kinda lost...
I've already read many tutorials, but...
The thing that i can't understand is, should i flash a compatible kernel, and then the rom i want, or is the kernel included in rom installation ?
Thanks in advance.
Cheers !
Hey,
Look at Omega ROM thread to see if it has included Kernel.
If it has a Kernel included, go ahead and flash it directly otherwise flash siyah kernel and then Omega (providing that they're both compatible, which i am sure that they are)
Cheers.
PS. Welcome to Galaxy S2 world!
Thanks for your reply !
In Omega thread, it says :
Inside Omega v20 Jelly Bean 4.1.2:
Based on firmware XWLSD Android 4.1.2 (Date: 31/01/2013)
Kernel: PhilZ cwm6
Modem XXLS8
CSC Multi set to EUR
So, kernel PhilZ is included in the installation, right ?
But, XWLSD mean that i should switch to firmware XWLSD before flash, or it's just in indication ?
repulse said:
Thanks for your reply !
In Omega thread, it says :
Inside Omega v20 Jelly Bean 4.1.2:
Based on firmware XWLSD Android 4.1.2 (Date: 31/01/2013)
Kernel: PhilZ cwm6
Modem XXLS8
CSC Multi set to EUR
So, kernel PhilZ is included in the installation, right ?
But, XWLSD mean that i should switch to firmware XWLSD before flash, or it's just in indication ?
Click to expand...
Click to collapse
No that means omega rom is based on latest stock LSD..And yes philz kernel comes with the rom. All you need is a safe kernel like siyah or dorimanx which has a proper CWM recovery
Thank you guys ! Will try to do it ASAP !
Cheers !
Well actually Philz is also safe kernel.
But if you want to switch to Siyah kernel or whatever do that after flashing the ROM
WardenBerret said:
Well actually Philz is also safe kernel.
But if you want to switch to Siyah kernel or whatever do that after flashing the ROM
Click to expand...
Click to collapse
So, can i flash Omega Rom in stock recovery, to switch directly from Samsung kernel to Philz ?
With Omega rom you will get Omega files app and you can dload there kernels and other stuff. Kernel section there is links to the philz, jeboo and siyah kernels. Just try there and use that what is best for you.
-MVKA
Sent from my GT-I9100 using Tapatalk 2
That can be really helpfull, thanks !
But, can i flash it in stock recovery, or should i first flash CWM (or other) recovery ?
repulse said:
That can be really helpfull, thanks !
But, can i flash it in stock recovery, or should i first flash CWM (or other) recovery ?
Click to expand...
Click to collapse
Do not flash roms in stock recovery. Specially if you are on ICS 4.0.4. You might brick your phone. If you are on ICS flash a safe kernel like siyah v5 or dorimanx kernel via ODIN. Then you can boot into recovery, do a wipe data/cache and install omega or whatever rom you want
repulse said:
That can be really helpfull, thanks !
But, can i flash it in stock recovery, or should i first flash CWM (or other) recovery ?
Click to expand...
Click to collapse
First flash a custom kernel, and from that point you can do a full wipe and flash roms.
Thank you all for your help guys !
Cheers !
Can anyone of you point me to the right kernel here please : http://dorimanx.shine.sk/ or in PhilZ Kernel thread.
Because i'm lost, there is to many choices and i don't want to blow up my phone.. I know that it should match my rom version, but match my actual rom, or the rom that i want to flash ?
Or more simplistic, can i flash it over stock kernel ?
Cheers !
EDIT : Kernel_Siyah-Dorimanx-V8.2-[17-35]-[05-03]-ICS-JB-SGII-PWR-CORE.zip is the right, i think... but need confirmation
I recently heard about PAC MAN ROM 4.2.2 for Galaxy GT I9100 which is hybrid of different ROMs like Paranoid, CynogenMod etc. I wanted to know how much stable is this ROM in terms of performance and battery life. Additionally, is custom kernel and CWM required to install this ROM or simply flashing the new ROM will do the job? I really am looking forward to installing this ROM in my phone
I have rooted S2 GT I 9100 with official 4.1.2, stock recovery and stock kernel.
Sent from my GT-I9100 using xda app-developers app
ssanjy said:
I wanted to know how much stable is this ROM in terms of performance and battery life.
Click to expand...
Click to collapse
That depends on each user mate. I suggest you read user opinions in the ROM's thread to find out.
ssanjy said:
Additionally, is custom kernel and CWM required to install this ROM or simply flashing the new ROM will do the job? I really am looking forward to installing this ROM in my phone
Click to expand...
Click to collapse
Like all custom ROMs, PACman ROM requires CWM and root. You don't need a custom kernel per se, but flashing a custom kernel is the best way to get root as well as CWM.
immortalneo said:
That depends on each user mate. I suggest you read user opinions in the ROM's thread to find out.
Like all custom ROMs, PACman ROM requires CWM and root. You don't need a custom kernel per se, but flashing a custom kernel is the best way to get root as well as CWM.
Click to expand...
Click to collapse
Can you please suggest me a stable custom Kernel that would be comparatively safe for my device GT I9100. I would be quite glad if you would help me with it...:good:
In discussing about the kernel in this thread in post# 619 pg 62 Viper has suggested me with Philz Kernel and FAQs of PacMan ROM, they suggest Dorimax Kernel for my device. So, are these kernel better in performance than the stock kernel or not and does performance of ROM depend upon kernel as well? Since I can backup my ROM and flash new ROM with temporary CWM, I am thinking of using it instead of other custom kernel so as not to mess up with my stock kernel.
ssanjy said:
Can you please suggest me a stable custom Kernel that would be comparatively safe for my device GT I9100. I would be quite glad if you would help me with it...:good:
In discussing about the kernel in this thread in post# 619 pg 62 Viper has suggested me with Philz Kernel and FAQs of PacMan ROM, they suggest Dorimax Kernel for my device. So, are these kernel better in performance than the stock kernel or not and does performance of ROM depend upon kernel as well? Since I can backup my ROM and flash new ROM with temporary CWM, I am thinking of using it instead of other custom kernel so as not to mess up with my stock kernel.
Click to expand...
Click to collapse
Actually all custom kernels are safe. Just make sure (by reading the instructions) you flash the compatible one.
Philz-kernel for example cannot be used with PAC. Just try the stock kernel. If you don't like it, you can try (for example) Dorimanx kernel.
Donnie Sins said:
Actually all custom kernels are safe. Just make sure (by reading the instructions) you flash the compatible one.
Philz-kernel for example cannot be used with PAC. Just try the stock kernel. If you don't like it, you can try (for example) Dorimanx kernel.
Click to expand...
Click to collapse
So if I want to try different ROMs can Dorimanx do the job for me? And since my device is already rooted do I need to unroot first before flashing new kernel which have rooting functionality?
Sent from my GT-I9100 using xda app-developers app
ssanjy said:
So if I want to try different ROMs can Dorimanx do the job for me? And since my device is already rooted do I need to unroot first before flashing new kernel which have rooting functionality?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
No you don't need to un-root and like her said.......read the instructions and search forums for specific kernals for specific ROMs. I'm not sure but I don't think dorimanx is compatible with ALL ROMs.
Anyone clarify?
Sent from my GT-I9100 using xda app-developers app
Flashing Kernels
cowen2006 said:
No you don't need to un-root and like her said.......read the instructions and search forums for specific kernals for specific ROMs. I'm not sure but I don't think dorimanx is compatible with ALL ROMs.
Anyone clarify?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
So just like flashing ROMs we can flash different kernels as per our need simply by installing the respective compatible kernels right?
ssanjy said:
So just like flashing ROMs we can flash different kernels as per our need simply by installing the respective compatible kernels right?
Click to expand...
Click to collapse
True:thumbup:
Restoring to stock
After flashing PACMan version of 4.2.2, if I need to for warranty, can I simply go to CWM recovery and restore previously created backup of my stock ROM?
ssanjy said:
After flashing PACMan version of 4.2.2, if I need to for warranty, can I simply go to CWM recovery and restore previously created backup of my stock ROM?
Click to expand...
Click to collapse
No, you need to do a back up to your pc first using kies preferably.....this will make sure its put back to stock standard for warranty purposes.
I thought s2/i9100's were too old to be warrant'd now?
Error in /emmc/...while flashing Pac Man 4.2
I tried to flash PacMan 4.2 but encountered problem. Posted my issue in this thread but no solution received yet.
Got error message something like
"assert failed get prop ("ro.product.device") == "galaxys2" ||getprop("ro.buil.product")==galaxys2.....Error in /emmc/[file location]....Installation aborted..."
Tried to flash pac_i9100_4.2-milestone.1.release_20130806-205645.zip (MD5sum: 5e569d28ae20c0dbb45c71a212a35ce4)
I searched the forum but some say its problem with CWM recovery and others tell about corrupted file. I downloaded file twice incl previous release of the ROM. I even explored the zipped file and could navigate to most of the folders which I think that suggests that file is fine (no corrupted download).
I used temporary CWM v. 6.0.1.4. Should I try Dorimanx Kernel as the developer of ROM suggests the kernel for the ROM.
I currently have official JB 4.1.2, stock recovery and kernel. GT I9100.
ssanjy said:
I tried to flash PacMan 4.2 but encountered problem. Posted my issue in this thread but no solution received yet.
Got error message something like
"assert failed get prop ("ro.product.device") == "galaxys2" ||getprop("ro.buil.product")==galaxys2.....Error in /emmc/[file location]....Installation aborted..."
Tried to flash pac_i9100_4.2-milestone.1.release_20130806-205645.zip (MD5sum: 5e569d28ae20c0dbb45c71a212a35ce4)
I searched the forum but some say its problem with CWM recovery and others tell about corrupted file. I downloaded file twice incl previous release of the ROM. I even explored the zipped file and could navigate to most of the folders which I think that suggests that file is fine (no corrupted download).
I used temporary CWM v. 6.0.1.4. Should I try Dorimanx Kernel as the developer of ROM suggests the kernel for the ROM.
I currently have official JB 4.1.2, stock recovery and kernel. GT I9100.
Click to expand...
Click to collapse
Use 'Philz' Kernel (tar file for ODIN Flash) to root ur phone and then use its recovery to install any custom rom of ur choice
Sun90 said:
Use 'Philz' Kernel (tar file for ODIN Flash) to root ur phone and then use its recovery to install any custom rom of ur choice
Click to expand...
Click to collapse
I have rooted my device by flashing zip file. And according to Donnie Sins in post#4 in this thread suggested that Philz-kernel cannot be used with PAC. Now I am more confused....:laugh::laugh::good:
ssanjy said:
I have rooted my device by flashing zip file. And according to Donnie Sins in post#4 in this thread suggested that Philz-kernel cannot be used with PAC. Now I am more confused....:laugh::laugh::good:
Click to expand...
Click to collapse
Lol, i said to install 'Philz' kernel so that u can use its recovery to flash PAC after that the 'Philz' kernel will be replaced by the one that comes with the PAC rom for u
PS- alternatively u can flash 'Dorimanx' kernel and use its recovery to flassh PAC rom
Sun90 said:
Lol, i said to install 'Philz' kernel so that u can use its recovery to flash PAC after that the 'Philz' kernel will be replaced by the one that comes with the PAC rom for u
PS- alternatively u can flash 'Dorimanx' kernel and use its recovery to flassh PAC rom
Click to expand...
Click to collapse
I should try Dorimanx then.....Should I use the one for JB/ICS Stock v 8.38 in this link for my device.
ssanjy said:
I should try Dorimanx then.....Should I use the one for JB/ICS Stock v 8.38 in this link for my device.
Click to expand...
Click to collapse
Yes
Sun90 said:
Yes
Click to expand...
Click to collapse
I still am getting "assert failed............(Status 7)
ssanjy said:
I still am getting "assert failed............(Status 7)
Click to expand...
Click to collapse
have u flashed the Dori v8.34 (tar File for ODIN) thro ODIN, if not try the same and see
Sun90 said:
have u flashed the Dori v8.38 (tar File for ODIN) thro ODIN, if not try the same and see
Click to expand...
Click to collapse
I tried to flash it through stock recovery and it said signature verification failed...when I tried it with temporary CWM version it displayed "assert....error!!!"
ssanjy said:
I tried to flash it through stock recovery and it said signature verification failed...when I tried it with temporary CWM version it displayed "assert....error!!!"
Click to expand...
Click to collapse
u cannot flash dori kernel from Stock recovery ma8 , instead Dwnld the V8.34 (.tar extension file ) from dori site and flash the same using 'ODIN' on PC. then reboot ur phone into dori kernel recovery and from there u do all the necessary wipes and install 'PAC' rom as per its install instruction's
Hello,
Today i downloaded NeatRom ( android 4.4.4) For the battery life etc etc,
And i also read that the dorimanX kernel is battery friendly, but where do i get the one for my android 4.4?
I have now a kernel installed ( CM recovery+ kernel for Kitkat -odinflashable), The version of CWM is v6.5.0.1.
Please help me
Jason
jasondutch said:
Hello,
Today i downloaded NeatRom ( android 4.4.4) For the battery life etc etc,
And i also read that the dorimanX kernel is battery friendly, but where do i get the one for my android 4.4?
I have now a kernel installed ( CM recovery+ kernel for Kitkat -odinflashable), The version of CWM is v6.5.0.1.
Please help me
Jason
Click to expand...
Click to collapse
Get 10.44v008 from here -
http://www.dorimanx.ataliba.net/
I would assume it will work, I have used it with other aosp 4.4.4 roms, but I haven't used neat rom.
noppy22 said:
Get 10.44v008 from here -
http://www.dorimanx.ataliba.net/
I would assume it will work, I have used it with other aosp 4.4.4 roms, but I haven't used neat rom.
Click to expand...
Click to collapse
Can i flash it without losing clockworkmod v6.5.0.1?
EDIT:// My odin v3.09 doesn't see the zip package.. how is that possible?
EDIT:// 2 Can i also put a custom bootanimation on my phone with the dorimanx kernel?
jasondutch said:
Can i flash it without losing clockworkmod v6.5.0.1?
EDIT:// My odin v3.09 doesn't see the zip package.. how is that possible?
EDIT:// 2 Can i also put a custom bootanimation on my phone with the dorimanx kernel?
Click to expand...
Click to collapse
I think dorimanx will replace your cwm with its own version(I am on 6.0.4.8), but there is not much difference. You can always flash the newer version if you really need it.
Odin won't see it as it is not a .tar file, just flash it from recovery. It is recommended if you are not re-flashing the rom to use the kernelwipe script from @hawkerpaul to make sure there are no issues from residual files from the old kernel.
I don't know about a custom boot-animation, it may be possible but not something that is a feature of the kernel
Sent from my GT-I9100 using XDA Free mobile app
Hey,
Thanks for your help,
So i just need to re-install my ROM after flashing the kernel?
jasondutch said:
Sent from my GT-I9100 using XDA Free mobile app
Hey,
Thanks for your help,
So i just need to re-install my ROM after flashing the kernel?
Click to expand...
Click to collapse
No, that would install the stock kernel again. If you have been using the rom as is for a while I would use the kernelwipe script, then just flash the dorimanx kernel from recovery, then just reboot into system. You can flash the kernel without the script but you run the risk of bugs because of left over files from the previous kernel.
noppy22 said:
No, that would install the stock kernel again. If you have been using the rom as is for a while I would use the kernelwipe script, then just flash the dorimanx kernel from recovery, then just reboot into system. You can flash the kernel without the script but you run the risk of bugs because of left over files from the previous kernel.
Click to expand...
Click to collapse
Alright thanks,
Unfortuanely my phone screen died
When its repaired i download the kernel instantly