Hello everybody, after trying to root my phone in order to eliminate apps pre-branded, my phone doesn't start anymore, black screen.
I tried to use both PC Companion or Flashtool, but the problem is still the same, they are not able to connect to the phone because of the failure to install MTP device driver when I connect phone to pc via usb.
I spend ALL the day trying to solve the problem..
Any help will be appreciated, Marco
This is the log using flashtool:
25/058/2013 20:58:07 - INFO - <- This level is successfully initialized
25/058/2013 20:58:07 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
25/058/2013 20:58:07 - INFO - You can drag and drop ftf files here to start flashing them
25/058/2013 20:58:15 - INFO - Device connected with USB debugging off
25/058/2013 20:58:15 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/058/2013 20:58:17 - INFO - Selected Xperia_2011_FreeXperia_ALL.ftf
25/058/2013 20:58:17 - INFO - Preparing files for flashing
25/058/2013 20:58:17 - INFO - Please connect your device into flashmode.
25/058/2013 20:58:28 - INFO - Device disconnected
25/059/2013 20:59:06 - INFO - Device connected with USB debugging off
25/059/2013 20:59:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/059/2013 20:59:10 - INFO - Flash canceled
25/000/2013 21:00:11 - ERROR - Drivers need to be installed for connected device.
25/000/2013 21:00:11 - ERROR - You can find them in the drivers folder of Flashtool.
apt drivers is not fine working
emmebila said:
This is the log using flashtool:
25/058/2013 20:58:07 - INFO - <- This level is successfully initialized
25/058/2013 20:58:07 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
25/058/2013 20:58:07 - INFO - You can drag and drop ftf files here to start flashing them
25/058/2013 20:58:15 - INFO - Device connected with USB debugging off
25/058/2013 20:58:15 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/058/2013 20:58:17 - INFO - Selected Xperia_2011_FreeXperia_ALL.ftf
25/058/2013 20:58:17 - INFO - Preparing files for flashing
25/058/2013 20:58:17 - INFO - Please connect your device into flashmode.
25/058/2013 20:58:28 - INFO - Device disconnected
25/059/2013 20:59:06 - INFO - Device connected with USB debugging off
25/059/2013 20:59:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/059/2013 20:59:10 - INFO - Flash canceled
25/000/2013 21:00:11 - ERROR - Drivers need to be installed for connected device.
25/000/2013 21:00:11 - ERROR - You can find them in the drivers folder of Flashtool.
apt drivers is not fine working
Click to expand...
Click to collapse
Did you installed drivers from c:/Flashtool/drivers folder?
Sent from my Xperia Ray using xda premium
Wechy77 said:
Did you installed drivers from c:/Flashtool/drivers folder?
Sent from my Xperia Ray using xda premium
Click to expand...
Click to collapse
Yes I did several times using under drivers directory Flashtool-drivers.exe (even if I'm not sure WHAT drivers I have to chose..). After that the problems still remains , in the device Manager I see that APT Driver is not correctly installed.
Is it possible to download somewhere this driver ?
Any other suggestion, I'm getting crazy :silly:
emmebila said:
Yes I did several times using under drivers directory Flashtool-drivers.exe (even if I'm not sure WHAT drivers I have to chose..). After that the problems still remains , in the device Manager I see that APT Driver is not correctly installed.
Is it possible to download somewhere this driver ?
Any other suggestion, I'm getting crazy :silly:
Click to expand...
Click to collapse
up, give me some idea plaese
emmebila said:
up, give me some idea plaese
Click to expand...
Click to collapse
Why are you trying it with the unbricking ftf? Have you tried flashing the stock rom?
Install Sony Update Service, it should have the drivers, too. Turn phone completely off (pull battery), wait 10 seconds, insert battery, launch flashtool, select the stock ftf for your phone, hit okay, hold volume down (on phone) and while holding it connect phone to pc :good:
Tell me why did your phone brick?
mihahn said:
Why are you trying it with the unbricking ftf? Have you tried flashing the stock rom?
Install Sony Update Service, it should have the drivers, too. Turn phone completely off (pull battery), wait 10 seconds, insert battery, launch flashtool, select the stock ftf for your phone, hit okay, hold volume down (on phone) and while holding it connect phone to pc :good:
Click to expand...
Click to collapse
Well, I was trying to root my Sony Ericsson Walman in order to uninstall some app pre loaded by manufacturer. I've flashtooled ST18i_4.1.A.0.562_(1252-5332).ftf and after that I'm no more able to switch on my phone, black screen, even if if I remove battery the green led is on.
I tried to unbrick phone using Flashtool, PC Companion, Sony Update Service, BUT the error I have is always the same, when the phone is attached to the computer, the MTP device drivers fails and return RC = 10.
@ mihahn
Could you please what "stock" ftf is and where can I find it in order to try to perform your suggestion ? Thanks again
Marco
emmebila said:
@ mihahn
Could you please what "stock" ftf is and where can I find it in order to try to perform your suggestion ? Thanks again
Marco
Click to expand...
Click to collapse
Stock ftf refers to the official firmware of ur mobile. U can find it in someguyfromhell's(don't forget to thank him) sticked thread in general and also the method to flash it...
Press THANKS if I helped,
Regards,
AJ
Related
Hello,
i cant turn on my x10, it just vibrate and the screen is black, i have tried to reinstal firmware by seus but it told me that it couldnt do it (some error) than i tried to flash it but it need usb debbuging on even if its in flah mode. I tried more roms but non was working. Is there a solution? thanks for answer.
From one of the tried flashing.
11/000/2012 15:00:27 - INFO - <- This level is successfully initialized
11/000/2012 15:00:28 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
11/000/2012 15:00:28 - INFO - You can drag and drop ftf files here to start flashing them
11/000/2012 15:00:37 - INFO - Device connected with USB debugging off
11/000/2012 15:00:37 - INFO - For 2011 devices line, be sure you are not in MTP mode
11/001/2012 15:01:05 - INFO - Selected Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.ftf
11/001/2012 15:01:05 - INFO - Preparing files for flashing
11/001/2012 15:01:05 - INFO - Please connect your device into flashmode.
11/001/2012 15:01:06 - INFO - Opening device for R/W
11/001/2012 15:01:06 - INFO - Start Flashing
11/001/2012 15:01:06 - ERROR -
11/001/2012 15:01:06 - ERROR - Error flashing. Aborted
11/001/2012 15:01:06 - INFO - Device connected with USB debugging off
11/001/2012 15:01:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
I had that exact problem last night.I had usb debugging on,downgraded the kernel and something then switched it off and I couldnt boot the phone.
I think I started pc companion>update > repair >chose my phone,then connected the phone holding back button when asked.
Either that or i used "easy rooting kit"
http://forum.xda-developers.com/showthread.php?t=1320350
I prefer using x10 flasher as that flashtool 0.6.7 give me nothing but trouble
flash the stock firmware using the latest flash tool. works like a charm
I have two questions regarding flashtool. Before connect my phone i enable USB debugging.
When i try to connect my phone in flash mode, after few seconds it automatically reboot to flashmode. When it reboot i can see kernel boot logo. It keep rebooting to the flashmode. In addition to that, when the phone automatically reconnecting, flashtool display "USB debugging off". Why is that?
If i connect my phone after boot (normally), flashtool identify my phone WT19 as "ST17". I try to edit it in flashtool "Device>Edit", but it again identify my phone as "ST17". Why is that?
:crying:
Flash mode log:-
06/056/2012 18:56:07 - INFO - <- This level is successfully initialized
06/056/2012 18:56:07 - INFO - Flashtool Version 0.9.7.0 built on 2012-09-30 15:49:10
06/056/2012 18:56:07 - INFO - You can drag and drop ftf files here to start flashing them
06/056/2012 18:56:12 - INFO - Device disconnected
06/056/2012 18:56:38 - INFO - Device connected in flash mode
06/057/2012 18:57:19 - INFO - Device disconnected
06/057/2012 18:57:39 - INFO - Device connected with USB debugging off
06/057/2012 18:57:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
06/057/2012 18:57:40 - INFO - Device disconnected
06/057/2012 18:57:43 - INFO - Device connected with USB debugging off
06/057/2012 18:57:43 - INFO - For 2011 devices line, be sure you are not in MTP mode
06/057/2012 18:57:43 - INFO - Device disconnected
Click to expand...
Click to collapse
android addicts said:
I have two questions regarding flashtool. Before connect my phone i enable USB debugging.
When i try to connect my phone in flash mode, after few seconds it automatically reboot to flashmode. When it reboot i can see kernel boot logo. It keep rebooting to the flashmode. In addition to that, when the phone automatically reconnecting, flashtool display "USB debugging off". Why is that?
If i connect my phone after boot (normally), flashtool identify my phone WT19 as "ST17". I try to edit it in flashtool "Device>Edit", but it again identify my phone as "ST17". Why is that?
:crying:
Flash mode log:-
Click to expand...
Click to collapse
On which software version are you currently on? Can you flash a wt19i firmware now on your device? Or does this fail/gives you an error?
Did you flash the wrong kernel?
Try reflashing the stock kernel/rom.
Install drivers again for windows
Sent from my MANGO using Tapatalk 2
Hi
I will try to be brief.
I have a ST18 (which has a bad flash that stops the screen working - if I press power button I can press power off/airplane mode etc but otherwise the screen is unresponsive).
The phone will not go into fastboot mode or be recognised in fb mode in windows (tried 3 different cables and 3 different pcs).
Windows 7 will recognise the phone but will not allow me to install the fb drivers ( I have tried everything, including disabling driver signing and getting windows to ask me what drivers to install).
On an XP machine, I still cannot install fb drivers but PC companion/flashtool/s1tool recognise the phone.
I have tried to work through the advice on here and reflash with various fw with flashtool but it will not fb and flash mode always stops with a security issue at the start of flashing. S1tool stops at the start of flashing with different issues depending on fw such as cannot send s1 command. DoomLord's toolkit does not recognise the phone.
I have tried everything I can find on this forum and on the web but don't want to write pages for you to sift through.
Any pointers would be really appreciated.
Thanks
jordan0001 said:
Hi
I will try to be brief.
I have a ST18 (which has a bad flash that stops the screen working - if I press power button I can press power off/airplane mode etc but otherwise the screen is unresponsive).
The phone will not go into fastboot mode or be recognised in fb mode in windows (tried 3 different cables and 3 different pcs).
Windows 7 will recognise the phone but will not allow me to install the fb drivers ( I have tried everything, including disabling driver signing and getting windows to ask me what drivers to install).
On an XP machine, I still cannot install fb drivers but PC companion/flashtool/s1tool recognise the phone.
I have tried to work through the advice on here and reflash with various fw with flashtool but it will not fb and flash mode always stops with a security issue at the start of flashing. S1tool stops at the start of flashing with different issues depending on fw such as cannot send s1 command. DoomLord's toolkit does not recognise the phone.
I have tried everything I can find on this forum and on the web but don't want to write pages for you to sift through.
Any pointers would be really appreciated.
Thanks
Click to expand...
Click to collapse
Can you post your log from flashtool and give some more information, like what you did before the problem started, if your bootloader is unlocked, are you rooted, and if you are on a custom ROM or running stock. If your bootloader is locked, have you tried to use PC Companion or SUS to fix your phone?
justmpm said:
Can you post your log from flashtool and give some more information, like what you did before the problem started, if your bootloader is unlocked, are you rooted, and if you are on a custom ROM or running stock. If your bootloader is locked, have you tried to use PC Companion or SUS to fix your phone?
Click to expand...
Click to collapse
Thanks for the quick reply justmpm
Sorry I cannot be too specific - the problem started after the phone was "unlocked" by a mobile shop.
From what I can work out, the bootloader is locked and the phone is not rooted. The phone was updated by SEUS to the latest stock.
I have had various flashtool errors, the latest of these was Read error :31 : A device attached to the system is not functioning. If I try another flash to save the log, would it be a good idea to use a particular fw as different fw give different logs?
Thanks
Any ideas at all would help.
And you have installed the drivers from flashtool -> drivers?
mihahn said:
And you have installed the drivers from flashtool -> drivers?
Click to expand...
Click to collapse
Hi
Yes, installing the flashtool drivers was the only way anything would work. Before that nothing worked which made me think this was more of a driver problem but then it does seem like the phone may be a problem with not being able to go into fastboot.
Thanks
Re: [Q] Help with ST18 bad flash
i think usb debugging is disabled on your phone and the unlocking procedure has your touchscreen firmware corrupted...
did u try repair phone option in SEUS..?
the reason why you got the device is not functioning error is because the usb debugging feature is disabled,not sure though..
can provide me the other errors you encountered in flashtool,maybe i can help you out..
a|\|droid_user said:
i think usb debugging is disabled on your phone and the unlocking procedure has your touchscreen firmware corrupted...
did u try repair phone option in SEUS..?
the reason why you got the device is not functioning error is because the usb debugging feature is disabled,not sure though..
can provide me the other errors you encountered in flashtool,maybe i can help you out..
Click to expand...
Click to collapse
Hi a|\|droid_user
What you are saying makes sense.
S1tool gives me the error
llbug:[\\?\USB#Vid_0fce&Pid_e161#43423531315632314D4C#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "The system cannot find the file specified"
Here is my log for flashtool, the first is for the basic Nordic fw pack, which I read worked for other people. The second is for A fw which I think is right for my phone and the next is for B fw. The only one which seems to start to flash is the second one.
20/011/2013 13:11:22 - INFO - <- This level is successfully initialized
20/011/2013 13:11:22 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
20/011/2013 13:11:22 - INFO - You can drag and drop ftf files here to start flashing them
20/011/2013 13:11:30 - INFO - Device disconnected
20/012/2013 13:12:44 - INFO - Selected XperiaTimes.com-ST18i_4.1.B.0.431_kernel.ftf
20/012/2013 13:12:44 - INFO - Preparing files for flashing
20/012/2013 13:12:44 - INFO - Please connect your device into flashmode.
20/012/2013 13:12:54 - INFO - Device connected in flash mode
20/012/2013 13:12:54 - INFO - Opening device for R/W
20/012/2013 13:12:55 - INFO - Start Flashing
20/012/2013 13:12:55 - INFO - Processing loader
20/012/2013 13:12:55 - INFO - Checking header
20/012/2013 13:12:55 - INFO - Ending flash session
20/012/2013 13:12:55 - ERROR -
20/012/2013 13:12:55 - ERROR - Error flashing. Aborted
20/012/2013 13:12:55 - INFO - Device connected in flash mode
20/013/2013 13:13:07 - INFO - Log written to C:\Flashtool\flashtool_2013-02-20_01-11-22.log
20/013/2013 13:13:22 - INFO - Device disconnected
20/014/2013 13:14:12 - INFO - Selected ST18i_4.0.2.A.0.62.ftf
20/014/2013 13:14:12 - INFO - Preparing files for flashing
20/014/2013 13:14:25 - INFO - Please connect your device into flashmode.
20/014/2013 13:14:30 - INFO - Device connected in flash mode
20/014/2013 13:14:31 - INFO - Opening device for R/W
20/014/2013 13:14:31 - INFO - Reading device information
20/014/2013 13:14:31 - INFO - Phone ready for flashmode operations.
20/014/2013 13:14:31 - INFO - Current device : ST18i - CB511V21ML - 1252-5986_R3I - 1248-9545_4.1.B.0.587 - WORLD-i_4.1.B.0.587
20/014/2013 13:14:31 - INFO - Start Flashing
20/014/2013 13:14:31 - INFO - Processing loader
20/014/2013 13:14:31 - INFO - Checking header
20/014/2013 13:14:31 - INFO - Flashing data
20/014/2013 13:14:34 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : NOT_ROOTABLE
20/014/2013 13:14:34 - INFO - Processing kernel.sin
20/014/2013 13:14:34 - INFO - Checking header
20/014/2013 13:14:34 - INFO - Flashing data
20/014/2013 13:14:36 - INFO - Processing fota1.sin
20/014/2013 13:14:36 - INFO - Checking header
20/014/2013 13:14:36 - INFO - Flashing data
20/014/2013 13:14:36 - INFO - Ending flash session
20/014/2013 13:14:36 - ERROR - Read error :31 : A device attached to the system is not functioning.
20/014/2013 13:14:36 - ERROR - Error flashing. Aborted
20/014/2013 13:14:36 - INFO - Device connected in flash mode
20/014/2013 13:14:47 - INFO - Log written to C:\Flashtool\flashtool_2013-02-20_01-11-22.log
20/014/2013 13:14:54 - INFO - Device disconnected
20/015/2013 13:15:50 - INFO - Selected ST18i_4.1.B.0.587.ftf
20/015/2013 13:15:50 - INFO - Preparing files for flashing
20/016/2013 13:16:24 - INFO - Please connect your device into flashmode.
20/016/2013 13:16:35 - INFO - Device connected in flash mode
20/016/2013 13:16:35 - INFO - Opening device for R/W
20/016/2013 13:16:35 - INFO - Reading device information
20/016/2013 13:16:35 - INFO - Phone ready for flashmode operations.
20/016/2013 13:16:35 - INFO - Current device : ST18i - CB511V21ML - 1252-5986_R3I - 1248-9545_4.1.B.0.587 - WORLD-i_4.1.B.0.587
20/016/2013 13:16:35 - INFO - Start Flashing
20/016/2013 13:16:35 - INFO - Processing loader
20/016/2013 13:16:35 - INFO - Checking header
20/016/2013 13:16:35 - INFO - Flashing data
20/016/2013 13:16:35 - INFO - Ending flash session
20/016/2013 13:16:35 - ERROR - Read error :31 : A device attached to the system is not functioning.
20/016/2013 13:16:35 - ERROR - Error flashing. Aborted
20/016/2013 13:16:35 - INFO - Device connected in flash mode
Thanks for looking into this.
May sound stupid but I have just found the thanks button (really) to thank mihahn and alokbina whose guides were the one's I tried before joining here.
So this is your problem?
20/016/2013 13:16:35 - ERROR - Read error :31 : A device attached to the system is not functioning.
20/016/2013 13:16:35 - ERROR - Error flashing. Aborted
i havent see this before
but, try reinstall the driver and flashtool or check your cabel. or you can try another PC maybe
alund said:
So this is your problem?
20/016/2013 13:16:35 - ERROR - Read error :31 : A device attached to the system is not functioning.
20/016/2013 13:16:35 - ERROR - Error flashing. Aborted
i havent see this before
but, try reinstall the driver and flashtool or check your cabel. or you can try another PC maybe
Click to expand...
Click to collapse
Hi alund
Thanks, I have tried different cables and PCs and eventually got one working but not with the standard drivers, only with flashtool and Gordon's gate drivers.
I am not sure if the drivers I have are good or not (I found them on a download site) or if it is a problem with the phone not going into fastboot (so the system not knowing it needs the fb drivers) but when I try to install drivers for fb mode they are not recognised.
Another thing is that, from what was said and from a small mark on the phone, it may have been dropped.
I am still searching for answers but I have still not got any ideas where I need to start.
Does anyone think it is a particular issue (maybe the phone or maybe the pc/drivers)?
Thanks
AW: [Q] Help with ST18 bad flash.
try flashing a kernel only..maybe this will work...
rob rich said:
try flashing a kernel only..maybe this will work...
Click to expand...
Click to collapse
Hi
Thanks, it was worth a go but the result was the same.
If anyone has got any idea what it might be, it would be a big help so I could start searching for clues.
AW: [Q] Help with ST18 bad flash.
jordan0001 said:
Hi
Thanks, it was worth a go but the result was the same.
Click to expand...
Click to collapse
the same error in flashtool?
Crazyyyyyyyyyyyyyy...................
jordan0001 said:
Hi alund
Thanks, I have tried different cables and PCs and eventually got one working but not with the standard drivers, only with flashtool and Gordon's gate drivers.
I am not sure if the drivers I have are good or not (I found them on a download site) or if it is a problem with the phone not going into fastboot (so the system not knowing it needs the fb drivers) but when I try to install drivers for fb mode they are not recognised.
Another thing is that, from what was said and from a small mark on the phone, it may have been dropped.
Click to expand...
Click to collapse
Hi its really sounds crazy to you but believe me i have gone through this with my MINI..................... you have to find another MDPI device or RAY itself an added advantage............ just tick MTP in USB Connectivity and connect it to your another PC i mean try different PC....... let your PC install its drivers after that install Flashtool and now you are good to go its worked for me...........in my case i have installed my friends LWW drivers n its worked for me:good::good: i think you have to try.................... and plz do let me know if it worked happy flashing..........................
jesudas said:
Hi its really sounds crazy to you but believe me i have gone through this with my MINI..................... you have to find another MDPI device or RAY itself an added advantage............ just tick MTP in USB Connectivity and connect it to your another PC i mean try different PC....... let your PC install its drivers after that install Flashtool and now you are good to go its worked for me...........in my case i have installed my friends LWW drivers n its worked for me:good::good: i think you have to try.................... and plz do let me know if it worked happy flashing..........................
Click to expand...
Click to collapse
Thanks jesudas - you're a star!
Not completely solved but I've got the right drivers installed so I'm pretty sure it is a phone problem.
Can anyone tell me if it is possible to change the USB settings of my phone without using the touchscreen (maybe using a pc connection or something)?
Gr8..........
jordan0001 said:
Thanks jesudas - you're a star!
Not completely solved but I've got the right drivers installed so I'm pretty sure it is a phone problem.
Can anyone tell me if it is possible to change the USB settings of my phone without using the touchscreen (maybe using a pc connection or something)?
Click to expand...
Click to collapse
Hey you are most welcome buddy.......................:laugh::laugh: i think you have to ggogle about ANDROID COMMANDER may be this will help you to solve your problem best of luck buddy.......................
Solved
Thanks for all of your help.
I downloaded fresh copies of flashtool and drivers and re-installed everything.
As I was setting administrator privileges I noticed that the start menu shortcut was pointing to the 32 bit version not 64.
As my system is 64 bit, I started up the right version and it flashed ok.
Re: [Q] Help with ST18 bad flash.
Please add solved in the title.
Hey ,
I wanted to proceed and root my completely stock xperia neo using this tutorial : http://forum.xda-developers.com/showpost.php?p=31159404&postcount=422 . I follow the instructions carefully (debuging , msc, unknown sources etc.). Once in the flashtool I press the flash button select flashmode & the kernel. I turn off the phone , hold the back button and plug in the usb cable. The phone turns on green light shining but black screen. But nothing happens in the flashtool . Here's the log :
22/014/2013 15:14:11 - INFO - <- This level is successfully initialized
22/014/2013 15:14:11 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
22/014/2013 15:14:11 - INFO - You can drag and drop ftf files here to start flashing them
22/014/2013 15:14:16 - INFO - Device disconnected
22/014/2013 15:14:55 - INFO - Selected MT11i_4.1.A.0.562_kernel.ftf
22/014/2013 15:14:55 - INFO - Preparing files for flashing
22/014/2013 15:14:55 - INFO - Please connect your device into flashmode.
I plugged in my usb cable directly on the motherboard, my pc os : windows 7 32bit .I run the newest version of the flashtool and my phone is recognized by windows with no problems & I installed the pc companion.
Any advice on how to get my phone into the flashmode is appreciated.
Thanks in advance
[SOLVED]
You probably didn't install flashtool drivers.
Which you can find in flashtool folder under drivers folder
Click to expand...
Click to collapse
You probably didn't install flashtool drivers.
Which you can find in flashtool folder under drivers folder
Sent from my Xperia Neo V using xda premium
Hi guys. Recently I bought a bricked Sony Xperia P. it boot only the Sony logo and it stuck. As i read i must flash a new .ftf using FlashTool but here's the problem. my device isn't recognize. I got the green light and i can hear the plug in sound from windows but nothing happen.
Here's the log.
19/009/2014 07:09:39 - INFO - <- This level is successfully initialized
19/009/2014 07:09:39 - INFO - Flashtool Version 0.9.16.0 built on 19-04-2014 19:00:00
19/009/2014 07:09:42 - INFO - Checking if changes have been made to devices folder.
19/009/2014 07:09:47 - INFO - Pulling changes from github
19/009/2014 07:09:48 - INFO - Devices sync finished.
19/009/2014 07:09:52 - INFO - Device disconnected
19/010/2014 07:10:00 - INFO - Selected Bundle for Sony Xperia P LT22i. FW release : 6.1.1.B.1.54. Customization : Sony
19/010/2014 07:10:00 - INFO - Preparing files for flashing
19/010/2014 07:10:12 - INFO - Please connect your device into flashmode.
19/010/2014 07:10:21 - INFO - Device connected in flash mode
19/010/2014 07:10:22 - INFO - Opening device for R/W
19/010/2014 07:10:22 - INFO - Reading device information
I'm using Windows 8.1 and and somehow i've instaled the drivers..Any suggestions ?
demian12 said:
Hi guys. Recently I bought a bricked Sony Xperia P. it boot only the Sony logo and it stuck. As i read i must flash a new .ftf using FlashTool but here's the problem. my device isn't recognize. I got the green light and i can hear the plug in sound from windows but nothing happen.
Here's the log.
19/009/2014 07:09:39 - INFO - <- This level is successfully initialized
19/009/2014 07:09:39 - INFO - Flashtool Version 0.9.16.0 built on 19-04-2014 19:00:00
19/009/2014 07:09:42 - INFO - Checking if changes have been made to devices folder.
19/009/2014 07:09:47 - INFO - Pulling changes from github
19/009/2014 07:09:48 - INFO - Devices sync finished.
19/009/2014 07:09:52 - INFO - Device disconnected
19/010/2014 07:10:00 - INFO - Selected Bundle for Sony Xperia P LT22i. FW release : 6.1.1.B.1.54. Customization : Sony
19/010/2014 07:10:00 - INFO - Preparing files for flashing
19/010/2014 07:10:12 - INFO - Please connect your device into flashmode.
19/010/2014 07:10:21 - INFO - Device connected in flash mode
19/010/2014 07:10:22 - INFO - Opening device for R/W
19/010/2014 07:10:22 - INFO - Reading device information
I'm using Windows 8.1 and and somehow i've instaled the drivers..Any suggestions ?
Click to expand...
Click to collapse
Use win 7. I just couldn't do anything in windows 8.1 back at the old days... Drivers seems to work, but in reallyti they don't.
Ken-Shi_Kun said:
Use win 7. I just couldn't do anything in windows 8.1 back at the old days... Drivers seems to work, but in reallyti they don't.
Click to expand...
Click to collapse
Can I use virtual machine ?
demian12 said:
Can I use virtual machine ?
Click to expand...
Click to collapse
Can't say anything about that, but in theory that shouldn't be a problem. But if virtual machine just for this use xp instead
Ken-Shi_Kun said:
Can't say anything about that, but in theory that shouldn't be a problem. But if virtual machine just for this use xp instead
Click to expand...
Click to collapse
Yeah...i set a Windows Xp virtual machine...but i don't know what to do next.
How to get usb device recognise ?
demian12 said:
Yeah...i set a Windows Xp virtual machine...but i don't know what to do next.
How to get usb device recognise ?
Click to expand...
Click to collapse
Pass through the USB slot that the phone uses to the virtual machine, then it will got realised, install the universal naked drivers (you can google it, it is on xda plenty places.) after the installation you can flash the factory ftf with the flashtool. I don't know that in fastboot or flash mode (I think fastboot) but try it. The virtual machine uses designated space, so you need to pass over the necessary files to it.
Ken-Shi_Kun said:
Pass through the USB slot that the phone uses to the virtual machine, then it will got realised, install the universal naked drivers (you can google it, it is on xda plenty places.) after the installation you can flash the factory ftf with the flashtool. I don't know that in fastboot or flash mode (I think fastboot) but try it. The virtual machine uses designated space, so you need to pass over the necessary files to it.
Click to expand...
Click to collapse
I'm stuck here...
demian12 said:
I'm stuck here...
Click to expand...
Click to collapse
you mean you dont know what button to use ?
try using volume up or volume down instead of back
ΧperiaΜan said:
you mean you dont know what button to use ?
Click to expand...
Click to collapse
I press the right combination but it won't go next...
demian12 said:
I press the right combination but it won't go next...
Click to expand...
Click to collapse
According to the PC companion on the desktop the problem will be, that you use the original Sony drivers. Use the ones bundled in the flashtool, those are the ones that works. Go into device manager and remove the drivers currently installed (and of course the PC companion). Install the drivers you found bundled with the flashtool (install fastboot, flash, adb scomm and P drivers).
Now retry. I don't remember what combination you must use (I remember volUP+plug in).
demian12 said:
I press the right combination but it won't go next...
Click to expand...
Click to collapse
try using volume up or volume down
Ken-Shi_Kun said:
According to the PC companion on the desktop the problem will be, that you use the original Sony drivers. Use the ones bundled in the flashtool, those are the ones that works. Go into device manager and remove the drivers currently installed (and of course the PC companion). Install the drivers you found bundled with the flashtool (install fastboot, flash, adb scomm and P drivers).
Now retry. I don't remember what combination you must use (I remember volUP+plug in).
Click to expand...
Click to collapse
Same result, i can only hear the plug in sound from windows 8...
ΧperiaΜan said:
try using volume up or volume down
Click to expand...
Click to collapse
It's power+volume down- green light. for flashmod
demian12 said:
Same result, i can only hear the plug in sound from windows 8...
Click to expand...
Click to collapse
This is a virtual PC so you need to pass through the USB each time you plug in-out the device (but you can automate it at the VirtualBox manager when plugged in on win8). If you have an old laptop or anything that can run a winxp and has an usb slot it may be more easy to use it.
It is an other thing, that the phone uses different drivers for fastboot mode, so you need to install them first (boot your phone into fastboot mode, then install the drivers) just after that can you flash the stock ftf.
Or if you want to use custom rom, you only need to flash the necessary kernel, then go into recovery, push the zip of the rom, install, enjoy...
---------- Post added at 02:56 PM ---------- Previous post was at 02:55 PM ----------
demian12 said:
It's power+volume down- green light. for flashmod
Click to expand...
Click to collapse
I'm more then sure, that you need to use vol up + plug in USB for blue light for fastboot mode. This is Sony, not SonyEricsson. Those are tha last phones that used flash mode.
demian12 said:
It's power+volume down- green light. for flashmod
Click to expand...
Click to collapse
so, both volume buttons dont work , you installed all the necessary drivers , you are using windows xp and .... oh ! i think it also has to do with the usb type you are using ( usb 2/3 ) . I once had trouble rooting a phone at usb 3 and then i connected it to usb 2 and it worked !!!! :laugh:
Okay, like 1-2-3
Steb-by-step instructions
1.
Delete anything that is related with the stock Sony things (PC companion and drivers currently installed)
2.
plug in phone, and automatize the USB pass through for the virtual machine at Virtual Machine manager
3.
install the drivers bundled with the flashtool
4.
boot your phone into fastboot mode (volume up and while it is pressed plug the phone into the USB).
For sidenote: you can turn off your phone like this: press vol up + power for 10 secs (until phone vibrates 3, 1 vibe is for restart, 3 is for shutdown). You can only go into fastboot mode when phone is turned off compleatley.
5.
If everything is set up (drivers, fastboot drivers, flashtool, stock ftf) shut down your phone (see above)
6.
start flashtool and go into flash, from the list choose the ftf you have copyed (I hope) to the flastool/firmwares directory, and it will say LT22i at the left column (BEWARE LT22i not LT22a !!!).
7.
click OK then you achieve the screen you posted, but with everithing set up. Press vol up and while doing so, plug in phone.
If you do everithing in the list, then the only thing that could be wrong is the virtual PC (Or you use USB3 instead os USB2 slot).
Enjoy.
Ken-Shi_Kun said:
Steb-by-step instructions
1.
Delete anything that is related with the stock Sony things (PC companion and drivers currently installed)
2.
plug in phone, and automatize the USB pass through for the virtual machine at Virtual Machine manager
3.
install the drivers bundled with the flashtool
4.
boot your phone into fastboot mode (volume up and while it is pressed plug the phone into the USB).
For sidenote: you can turn off your phone like this: press vol up + power for 10 secs (until phone vibrates 3, 1 vibe is for restart, 3 is for shutdown). You can only go into fastboot mode when phone is turned off compleatley.
5.
If everything is set up (drivers, fastboot drivers, flashtool, stock ftf) shut down your phone (see above)
6.
start flashtool and go into flash, from the list choose the ftf you have copyed (I hope) to the flastool/firmwares directory, and it will say LT22i at the left column (BEWARE LT22i not LT22a !!!).
7.
click OK then you achieve the screen you posted, but with everithing set up. Press vol up and while doing so, plug in phone.
If you do everithing in the list, then the only thing that could be wrong is the virtual PC (Or you use USB3 instead os USB2 slot).
Enjoy.
Click to expand...
Click to collapse
So, I have instaled Windows XP. I have only flashtool and the drivers provided by it. If I pres. Volume Up while plug in the cable, nothing happen. Every tutorial says that I must hold the volume down.. :-s
if i press the volume down, it ramain the same as the log above. I'm so confused
19/040/2014 09:40:57 - INFO - <- This level is successfully initialized
19/040/2014 09:40:57 - INFO - Flashtool Version 0.9.16.0 built on 19-04-2014 19:00:00
19/040/2014 09:40:58 - INFO - Checking if changes have been made to devices folder.
19/041/2014 09:41:14 - INFO - Pulling changes from github
19/041/2014 09:41:15 - INFO - Devices sync finished.
19/041/2014 09:41:20 - INFO - Device disconnected
19/042/2014 09:42:18 - INFO - Selected Bundle for Sony Xperia P LT22i. FW release : 6.1.1.B.1.54. Customization : Sony
19/042/2014 09:42:18 - INFO - Preparing files for flashing
19/044/2014 09:44:03 - INFO - Please connect your device into flashmode.
19/044/2014 09:44:48 - INFO - Opening device for R/W
19/044/2014 09:44:48 - INFO - Start Flashing
19/044/2014 09:44:48 - INFO - Processing loader.sin
19/044/2014 09:44:48 - INFO - Checking header
19/044/2014 09:44:48 - ERROR - Processing of loader.sin finished with errors.
19/044/2014 09:44:48 - INFO - Ending flash session
19/044/2014 09:44:48 - ERROR -
19/044/2014 09:44:48 - ERROR - Error flashing. Aborted
19/044/2014 09:44:49 - ERROR - Drivers need to be installed for connected device.
19/044/2014 09:44:49 - ERROR - You can find them in the drivers folder of Flashtool.
19/044/2014 09:44:51 - INFO - Device disconnected
And this is the driver which every time pop up
http://postimg.org/image/xm7dt2yyr/
demian12 said:
So, I have instaled Windows XP. I have only flashtool and the drivers provided by it. If I pres. Volume Up while plug in the cable, nothing happen. Every tutorial says that I must hold the volume down.. :-s
if i press the volume down, it ramain the same as the log above. I'm so confused
19/040/2014 09:40:57 - INFO - <- This level is successfully initialized
19/040/2014 09:40:57 - INFO - Flashtool Version 0.9.16.0 built on 19-04-2014 19:00:00
19/040/2014 09:40:58 - INFO - Checking if changes have been made to devices folder.
19/041/2014 09:41:14 - INFO - Pulling changes from github
19/041/2014 09:41:15 - INFO - Devices sync finished.
19/041/2014 09:41:20 - INFO - Device disconnected
19/042/2014 09:42:18 - INFO - Selected Bundle for Sony Xperia P LT22i. FW release : 6.1.1.B.1.54. Customization : Sony
19/042/2014 09:42:18 - INFO - Preparing files for flashing
19/044/2014 09:44:03 - INFO - Please connect your device into flashmode.
19/044/2014 09:44:48 - INFO - Opening device for R/W
19/044/2014 09:44:48 - INFO - Start Flashing
19/044/2014 09:44:48 - INFO - Processing loader.sin
19/044/2014 09:44:48 - INFO - Checking header
19/044/2014 09:44:48 - ERROR - Processing of loader.sin finished with errors.
19/044/2014 09:44:48 - INFO - Ending flash session
19/044/2014 09:44:48 - ERROR -
19/044/2014 09:44:48 - ERROR - Error flashing. Aborted
19/044/2014 09:44:49 - ERROR - Drivers need to be installed for connected device.
19/044/2014 09:44:49 - ERROR - You can find them in the drivers folder of Flashtool.
19/044/2014 09:44:51 - INFO - Device disconnected
And this is the driver which every time pop up
http://postimg.org/image/xm7dt2yyr/
Click to expand...
Click to collapse
Sill, after intaling the semc flash driver my flashtool stuck at INFO - Reading device information. Same result on Windows 8.1 as Windows Xp.
I don't know what else to do. My phone boots gets the green light and the blue one but worthless. Could be the motherboard broked ?
demian12 said:
Sill, after intaling the semc flash driver my flashtool stuck at INFO - Reading device information. Same result on Windows 8.1 as Windows Xp.
I don't know what else to do. My phone boots gets the green light and the blue one but worthless. Could be the motherboard broked ?
Click to expand...
Click to collapse
I have one little thing in my mind, that the phone is not BL unlocked, which of course gives the above error. Try BL unlock if the phone is locked (don't know how to see it) but driver error could be the cause also. Virtual PC is not a full PC so anything can happen.
Ken-Shi_Kun said:
I have one little thing in my mind, that the phone is not BL unlocked, which of course gives the above error. Try BL unlock if the phone is locked (don't know how to see it) but driver error could be the cause also. Virtual PC is not a full PC so anything can happen.
Click to expand...
Click to collapse
I will try to unlock the bootloader.
I have instaled windows xp on a partition not virtual machine.