Related
So I wanted to start out this review by saying, that when I originally bought my Evo 3D, I had purchased an Otterbox case which they sell at Sprint for it as well. I am a bit neurotic when it comes to my phones and always have to have them protected. I had the Otterbox on till the day I received my Seidio Active case from the great people of Seidio to try out. To be honest, I was actually going to use the Seidio case for a week and then go back to the Otterbox, but actually I just got back from Sprint, I just returned the Otterbox.
I have to say that in my opinion this Seidio case has the Otterbox beat hands down. The grooves that the Active case has for your fingers and the material they use for the silicone underlay just feel better. I compared the Otterbox to the Active case and when it comes to size, the Otterbox in my views is bigger and bulkier, but it seems that the Seidio case more protection. The silicone on the Otterbox feels like its half the amount used on the Active case, it’s a flimsier feel then Seidio’s. Now you would think because the Seidio case is smaller, it would give you less protection, but I feel that my phone is much more protected.
Another benefit with the size of the Seidio Active case, is that it feels much better in the pocket, however with both phones there is a bit of resistance when taking it from the pocket due to the silicone, but it happens with all silicone based cases. The only real downside I have seen with the Active case when using it for the past couple of days is that the silicone attracts lent from your pocket, but can easily removed with a wipe of a cloth.
The main thing that I am happy about, and have read in other reviews of the case is the protection the case provides to the camera. I had recently bought a TPU case from online and returned it immediately after seeing that the case lined perfectly with the camera casing, leaving it open to scratches and marks.
Another big thing that is a benefit with this case, compared to the Otterbox, is that all the cut outs for the power button and charging ports line up perfectly. I noticed that on the headphone jack on my Otterbox it was cut out incorrectly leaving me to have to jam the headphone jack into place. Not with the Active case, everything lines up perfectly. The silicone is cut to an exact precision. I know that the ports don’t have a cover like the Otterbox, but I actually prefer this, its an easy access and most of the time, I am prepared for those covers to break off in time, giving the phone a cheap look.
I know that some are disappointed that the case doesn’t come with a built in screen protector like the Otterbox but not I. I love that it doesn’t, I feel that the built in protectors have a more rubbery feel to them then other protectors. I would personally recommend the Screen Guards from Seidio; they are smooth like glass and fit to a tee.
In an overall judgment I give the phone a 10/10. There is not one thing I would change about this case, I love it more then anything. It looks great and feels even better. I would highly recommend this case to anyone who is in the market for a new case. Not only are you buying a great case, you are buying it from a great company that is willing to go that extra mile and help you out when it is needed, whether it is a return or replacement, and this type of customer service just gives me that little extra push to buy Seidio then any other company.
Looks just like the Innocase Rugged( minus the inner 2-piece hard shell) that I used on my Evo 4G before going to the Ballistic HC. How much is this case and who all sells it? Hope to be getting my 3D in the next couple weeks and may just get this case to go on it. My Innocase Rugged held up great, just replaced it with the Ballistic HC based on looks....
Still torn though honestly, I like the fact that the Otterbox covers the camera area better
Sent from my PC36100 using XDA Premium App
Matty Mo said:
So I wanted to start out this review by saying, that when I originally bought my Evo 3D, I had purchased an Otterbox case which they sell at Sprint for it as well. I am a bit neurotic when it comes to my phones and always have to have them protected. I had the Otterbox on till the day I received my Seidio Active case from the great people of Seidio to try out. To be honest, I was actually going to use the Seidio case for a week and then go back to the Otterbox, but actually I just got back from Sprint, I just returned the Otterbox.
I have to say that in my opinion this Seidio case has the Otterbox beat hands down. The grooves that the Active case has for your fingers and the material they use for the silicone underlay just feel better. I compared the Otterbox to the Active case and when it comes to size, the Otterbox in my views is bigger and bulkier, but it seems that the Seidio case more protection. The silicone on the Otterbox feels like its half the amount used on the Active case, it’s a flimsier feel then Seidio’s. Now you would think because the Seidio case is smaller, it would give you less protection, but I feel that my phone is much more protected.
Another benefit with the size of the Seidio Active case, is that it feels much better in the pocket, however with both phones there is a bit of resistance when taking it from the pocket due to the silicone, but it happens with all silicone based cases. The only real downside I have seen with the Active case when using it for the past couple of days is that the silicone attracts lent from your pocket, but can easily removed with a wipe of a cloth.
The main thing that I am happy about, and have read in other reviews of the case is the protection the case provides to the camera. I had recently bought a TPU case from online and returned it immediately after seeing that the case lined perfectly with the camera casing, leaving it open to scratches and marks.
Another big thing that is a benefit with this case, compared to the Otterbox, is that all the cut outs for the power button and charging ports line up perfectly. I noticed that on the headphone jack on my Otterbox it was cut out incorrectly leaving me to have to jam the headphone jack into place. Not with the Active case, everything lines up perfectly. The silicone is cut to an exact precision. I know that the ports don’t have a cover like the Otterbox, but I actually prefer this, its an easy access and most of the time, I am prepared for those covers to break off in time, giving the phone a cheap look.
I know that some are disappointed that the case doesn’t come with a built in screen protector like the Otterbox but not I. I love that it doesn’t, I feel that the built in protectors have a more rubbery feel to them then other protectors. I would personally recommend the Screen Guards from Seidio; they are smooth like glass and fit to a tee.
In an overall judgment I give the phone a 10/10. There is not one thing I would change about this case, I love it more then anything. It looks great and feels even better. I would highly recommend this case to anyone who is in the market for a new case. Not only are you buying a great case, you are buying it from a great company that is willing to go that extra mile and help you out when it is needed, whether it is a return or replacement, and this type of customer service just gives me that little extra push to buy Seidio then any other company.
Click to expand...
Click to collapse
Looks nice man love the otter box defender keeps the ports covered . I was thinking about the convert combo looks cool tho heard bad things about the rebrand from breast buy folks said it was cheap feel and broke at times for folks camera flap was kinda gay folks were sayin it had a bad feel .
If u test the convert combo out let me know to me the otter box defender looks way and feels better then what breast buy has out sexy and smooth.
When trident and ballistic come out with the kraken and aegis from trident will be sweet and the tank from ballistic will be sweet .
Yeah, i like the port covers but on the otterbox case i had for less then a week, the port covers already started to rip before returning it which is a downside... thats why i like having no port covers, its in preparation of when it does fall off!
and just so you know, this is the Active Case, made by Seidio.
Agree 100% with OP. Returned Otterbox Defender (too bulky, hard to type) returned Otterbox Commuter (felt thin, cheap, low quality, rubber not tight)
Bought Seido rebranded as Platinum from Bestbuy same as OP (except mine is black rubber with white back.) Rubber is almost TWICE as thick as Otterbox, way tighter on phone and just feels much much better. Better grip, better weight (and +1 on appearance)
it was $37.88 at bestbuy, same price as my Otterbox commuter refund.
Totally satisfied, would recommend 100%, would buy this PT/Seido again tomorrow if I had to.
Edit...and no power slot cover which is a +1 since it eliminates the extra step pain in the a.. and seemed unnecessary anyway. Can of aerosol air blast removes and dust or lint from that port in 2 seconds
...nice upgrade from hero
I'm a Seidio fan.
The only problem I ever saw personally with the active case was the corner pieces breaking easily. I had a couple of them and experienced the same problem. Otherwise...nice case.
Purchased the SiKai MicroFiber case for the Lenovo IdeaPad K1 Tablet. Delivery was within the UK and didn't take too long, about 5 days including the weekend.
I paid £15.19 delivered from Ebay UK Item number: 200647561882
The case is made from a strange type of plastic material, it's quite soft and flexible. Am kind of glad rather than faux leather. It is very thin and light, but seems sturdy enough to protect the tablet around the house. I have a 10" netbook bag that I keep it in when travelling to add extra protection.
I like it since it makes it easy to carry around with you and doesn't add bulk to it. I would say the case is lighter than my official HP Touchpad case and similar in strength, although a different material. I can only compare it to the ROOCASE Multi-Angle Leather Case and can say it is much thinner and lighter than that.
There is only one angle that the case allows for, but since it is an Android tablet you can flip the whole thing round and get a lower angle. Its fine for watching at night when streaming video so its not an issue for me.
Price wise the only options available to me at the time were the faux leather ones for about £9.99 or the official case from the Lenovo website coming in at a hefty £34.99 once you add the crazy £10 delivery charge! Not many options in the UK unfortunately but am glad I did some research and found this case.
Other things that you might notice in the photos (sorry poor camera phone ones) there is a place to put a pen, all cut outs seem correct and I love the fact that I can charge it without having the case open, also the hdmi port is free.
Not sure how long it will last but considering the few days usage of it, the minor things like the tablet can slide a tiny bit inside the case so would have preferred a tighter fit (although will try and adjust the velcro again that closes once you slip the tablet inside), the cut out by the front facing button could be a bit lower, and the magnetic clasps to be quite weak I will give this case an 8/10 and can recommend it.
http://www.ebay.co.uk/itm/SiKai-MicroFiber-case-Lenovo-IdeaPad-Tablet-K1-case-/200647561882
great case! I bought this sikai case too and actually prefer it more than the original lenovo K1 case.
This covers all ports, and also has a great microfiber texture that is slightly grippy, while remaining smooth to the touch. does not attract dust at all and keeps the K1 snug (if it feels loose, readjust the velcro tighter).
recommended!
Yeh have tightened it a bit more, doesn't move as much.... Glad I chose this over the cheaper cases and the official one which was more than double the cost here in the UK.
Can't believe how dead this forum is for this tablet, going to see if there are anymore forums with more support....
Just got this tab last week and love it so far. Looking for a good case but hate the leather, faux leather look.
Please let me know if you find more forums as I have looked and am surprised how little I've found....
I know of one other decent one, google "lenovo community K1"
viggs74 said:
Just got this tab last week and love it so far. Looking for a good case but hate the leather, faux leather look.
Please let me know if you find more forums as I have looked and am surprised how little I've found....
I know of one other decent one, google "lenovo community K1"
Click to expand...
Click to collapse
Cool will do.
This case is pretty good if you want something thin and light, there are stronger/more protective cases out there but they add bulk and I don't want that since I use this round the house...... Still glad I bought this case and find it better in that respect to the Roocase.....
Thanks, will google what you said.....
Got the SiKai for my TPT. Everyting else looks bulky in comparison. It is extremely thin (I''ve tried a lot of gadget cases over the years), and although it's screamingly vinyl, it doesn't look really cheap since it fits so well. Leather like this might come off as over-the-top (not that I wouldn't probably sucker into that if I could find it). It's got the seam around the edge where it cushions a drop, and the magnetic closure on the flap is a great touch, not too powerful, but it stays closed well enough.
My gripes are with the screen cover flap: it leaves two stripes on my matte screen protector where the fold places rub off the grease I thought I cleaned off last night, it doesn't hold the tablet vertical enough to really use, and it's busy looking on the front. If I had a choice in the design, I would leave off the "stand" capabilities and leave it flat. If it's open, it's really floppy; it would be easier to manage if it were entirely rigid. I might add a hide-able tether & a knob/button so you could stand it up on its other edge more vertically instead.
All in all, for the price I paid (US$26-ish), I'm very happy with it. If Piel Frama comes up with something, though, I might check that out, if only to drool. I still love my old Wizard case, and my Advantage case from them, too. Very lovely, solid product, and they've been keeping customers happy for a long time.
Addendum: After a couple of months with it, mine is holding together just fine. I had to trim a bit of vinyl fringe, butvall vinyl does that ( it frays a bit after it's freshly cut, but after you trim it once, unless it's cut really crooked, you're done). I have noticed that after a bit of stretching from the daily+ in & out I do to use the dock, it's loose enough to partially obscure the rear camera, not to mention trying to take pics with the flap cover is a huge PITA. If I used this camera a lot, I'd be totally fed up with this case. I may also be melting a bigger hole for the speaker (whch is hard-core disappointing to begin with). All in all, though, that's it for my complaints, which is pretty rare for me.I plan on cloud storage sync and a great cam on my next phone to use the tab for pviewing,
To be fair the official HP Touchpad case does the same thing to my Touchpad so it's one of those things.
I use the same case for my Thinkpad Tablet, and it's the best I've encountered so far, albeit with some flaws of it's own: Some of the stitching on the inside of the cover is already beginning to fall apart after ~1 Month of usage :-/
Stitching has been fine on mine, maybe tell the reseller to exchange it?
Wow cool.... but its little bit expensive
Just received the new Gumdrop Droptech case for my Prime.
I was surprised by the weight of the Fedex box that the case came in, as soon as I opened it I understood why. The Prime itself is no lightweight, and the Gumdrop case probably weighs half what the Prime does. There are no installation instructions included with the case, I didn't need any, I have owned a couple of Otterbox cases for my phones, if you are familiar with the way things are generally done in a multi-layer case it's not hard to puzzle out. However I think Gumdrop may be giving the general public a bit too much credit here, it wouldn't hurt to slip some simple graphical instructions into the box. The front layer which includes the integral screen protector snaps on to the Prime and the silicon rubber layer enfolds everything. Spend thirty seconds making sure the tabs are seated in the slots and you are finished. Installation takes less than a minute.
The Screen protector is great, I didn't bother removing my old screen protector before putting it in the gumdrop, and there's really no need. The screen works perfectly through both layers. I didn’t notice any diminution of image quality or responsiveness .
Silicon rubber tends to be tacky and pick up lint like a magnet. I was pleasantly surprised by the texture of the Gumdrop, it's not nearly as tacky as I have come to expect silicon rubber too be, the texture of the rubber is quite smooth, and I really don't expect to see it picking up lint like it's on sale. The case is HEAVILY molded however in almost a tire tread pattern, the treads make picking up and handling the Prime very sure, I don't feel like I am going to drop it, and the extra girth makes the tablet easier to hold.
All ports, including the MicroSD port are accessible by prying up little rubber flaps. The flaps fit into molded tabs in the poly carbonate front piece. If I had to rate them on a scale of 1-10, 1 being very easy to lift and 10 being very difficult to accidentally dislodge, I'd say they are about a 4.
Also worth noting, you cannot use the KB dock with the Gumdrop case in place, and the front polycarbonate part of the case does interfere with your thumbs hitting the spacebar when typing on the soft KB with the device completely flat on a table or your lap. Elevate the upper edge of the device an inch or so and the problem goes away.
In terms of protection, I would have to rate the case, as very protective of the device, say 7.5 on a scale of 1-10. Everyone is different in their expectations, but I expect the case to add excellent impact protection and good casual splash protection. It's not going to add any structural strength to the Prime, but I feel the device itself is pretty rigid, so I don't worry much about that. With the protection comes a significant increase in girth and weight, and here is where I think some people will probably get heartburn. Again, this is a case of different expectations and purposes I travel a LOT on the job, I bought a 64Gb Prime because I wanted a Tegra3 Hotrod with a lot of storage to replace my laptop, MP3 player and Kindle. The fact that it's very thin and somewhat light, really didn't even come into consideration for me. If thin and light is a big consideration for you and you use your tablet in a fairly controlled environment then this case probably isn’t your cup of tea. If on the other hand, like me, you drag the thing all over the country, weekly, and use it everywhere from planes trains and automobiles, and are looking to add some heavy duty protection then the Gumdrop case is a great option, and I think right now it's the only option for the Prime. At $59 plus $7 shipping, the price of admission is pretty salty. But when you compare it to the cost of replacing your investment, then it starts to look a lot more reasonable.
Hope this is helpful to anyone considering one of these cases.
QBall16 said:
The Prime itself is no lightweight, and the Gumdrop case probably weighs half what the Prime does.
Click to expand...
Click to collapse
As 10" tablets go, I would disagree.
I would disagree as well for the weight of the Prime. Also, the BOX ITSELF has instructions on how to assemble the unit inside of the case. This case is SPECTACULAR for the price as it protects every aspect of your device. I, personally, have two cases, one business( a Roocase Folio) and then also I have the new version of the Gumdrop case for when I am out hiking(yes, I bring Optimus with me in to the woods) and when I am out having fun.
I have to agree that the cost of the case is worth protecting your investment.
Hi all,
Here is my review of the Sikai leather/plastic case, as sold by Amazon. For comparison, I have had my Prime in the Poetic cover since I got it. It was okay, but didn't have a charging slot in the spine so it had to be open to be plugged in - plus the nearly-flat angle was nearly-useless because the cover kept slipping out of the tab you tucked it into. I had ordered the GreatShield folio case, but returned it because I didn't like the way the case gripped the tablet, plus I didn't like that to close the cover I had to put pressure on the screen to slide the clip past the edge.
Onto my review...
As mentioned in other reviews, it is a strange mix of black leatherette and dark brown plastic. The plastic back plate is great - the Prime snaps in and seems to be held quite securely. Similar to many iPad covers, it just wraps over the edge - enough to hold, but out-of-the-way enough to really reveal the sleek Prime look. The main portion of the back plate is the black leatherette material, with only the outer edge showing the brown plastic. It has all of the necessary cutouts - including (apparently) the ability to have the dock attached and still close the cover. That is because the "hinge" pieces that connect the cover to the back plate are elastic. I don't have a dock, so I can't comment much on that.
The leather-ish cover looks to be two pieces glued/sewn together, with two bends in the midde - allowing it to be folded up in a triangle shape. Both angles I tried seem to be reasonably stable while typing. About the two layers of the cover...they might have been able to get away with only one, giving it a sleeker appearance, but they had to account for the strap that slips over the sides to hold the cover against the screen. The strap is fine, and gives it an upscale look, but I would have preferred a more unobtrusive solution with magnets or something similar. Overall, the case is skinny enough - just about the same thickness as my Poetic case. That is actually a bit of a downer since I expected this to be thinner since the Poetic case has that layer around the bezel with the magnets in the corners.
There are a few tiny fit-and-finish things that I didn't expect to see in a $30 case. The leather part of the back plate doesn't always make a perfect fit with the plastic border. I'm really nitpicking here, but when this costs three times as much as my Poetic case, I was expecting Ferrarri-quality stuff. I know - it still only $30 so I won't beat them up (much) for it.
Overall, I really like the Sikai. It has a superior look to the Poetic - that one hid all of the nice features of the Prime underneath the protective layers of the front/back/cover. When all that is exposed is the center part of the screen, it almost doesn't matter anymore what Asus designed it to look like. The Sikai shows the Prime's lines and curves much better than the other cases I have seen. The plastic seems tough enough to not break or wear any time soon, so as long as the leatherette holds up, I say this is the best case available for the Prime under $30...
By the way, when ordering from Amazon, it ships from Hong Kong. I placed the order on June 18th, and got a confirmation within 24 hours that it had shipped. However, the confirmation email said my ETA was JULY 31st! Needless to say, I was very happy when it arrived today instead...
I figured there were already better pictures available than my crappy phone can provide, but I can take some close-ups of specific features if requested.
Thanks!
swordsman74 said:
It has all of the necessary cutouts - including (apparently) the ability to have the dock attached and still close the cover. That is because the "hinge" pieces that connect the cover to the back plate are elastic. I don't have a dock, so I can't comment much on that.
Click to expand...
Click to collapse
The dock works great with this case!
yeah I've had this case for a few weeks and its very functional. I really like how it doesn't cover the bezel on the prime like the sikai fiber case and you get multiple angles that actually work
My only complaints are that its a bit on the heavy side and because its designed to be put into the dock with the case on, the steepest angle isn't quite as steep as other cases because the flap slides out making the "hinge" not at the fold but an inch out
oh and the case is kind of ugly haha
Hey fellas!
I am looking for a premium looking case for my nexus 6.
My phone is white if it matters.
I did like a lot the Nilkin slim border, but its out of stock everywhere.
Also i have found this:
https://www.ebay.com/itm/Luxury-Sli...hash=item41939eb983:m:m2afeTHn0qE_nI9hygZ9iVg
Black aluminum borders.
Besides that, im looking for something that will give me a nice grip yet still make the phone look elegant and aesthetic.
Thanks!
I have that. It looks okay, but the quality is crap. I got rid of it right away.
My favorite Nexus 6 case is this one:
Ringke FUSION [Dust Cap/Drop Protection][CLEAR] Shock Absorption Bumper. (Available on Amazon)
It adds minimal bulk and fits like a glove.
I bought this case about 6mo ago, and have been very happy with it: https://www.ebay.com/itm/152687543728 (Not affiliated with the seller, just a happy customer)
Back is a clear, hard plastic (poly-carbonate?) and the "lip" is a firm TPU-type material. I've dropped it dozens of times with zero problems.
I've used the "S-shape" type cases for other phones in the past. A simpler, less "high-end" look, but they have tiny little "nubs" at the edges that give excellent grip. (Zoom in on pics to see):
https://www.ebay.com/sch/Cases-Cove..._from=R40&_nkw=nexus+6+s+tpu+case+-"nexus+6p"
Guyinlaca said:
My favorite Nexus 6 case is this one:
Ringke FUSION [Dust Cap/Drop Protection][CLEAR] Shock Absorption Bumper. (Available on Amazon)
It adds minimal bulk and fits like a glove.
Click to expand...
Click to collapse
I have this Ringke also and it is a good case, but I wouldn't consider it premium. It does provide adequate protection for minor bumps and falls. It has a large enough lip that my tempered glass screen protector doesn't scratch if I place the phone face-down on a table. The clear TPU yellows over time so it looks dingy though. Depending on how frequently you charge or use a headset, the dust caps can be annoying (of course they are easy to snip off the case if you like.)
Overall it is a very good case and the one I use most of the time, but particularly because of the yellowing of the clear plastic, I can't consider it a premium case.
I use a Spigen slim armor. Very nice looking and protects well. I had together it directly from Spigen though. I tried ordering one from a discounter and they send me a fake. It literally didn't even look like the real thing and lacked the kick stand and didn't even fit properly. They just printed Spigen on some random vaguly similar case and tried to pass it off.
Have had a number of cases over the years and I'm none rival the quality, feel, build, and just plain sexiness of the Seidio Dilex Pro. I'm the best kickstand case as the kickstand itself is metal as well as magnetic, it's also very sturdy. I went thru 2 Spigen Slim Armor kickstand cases after the plastic kickstands broke off then I discovered this beauty lol. Also rocking a Dbrand skin and no problems with the fit. Also the feel of the outside lip is great, more than enough to sit it face down, but formed and angled perfectly as to not in any way hinder using the screen. Seidio is also a big name company so the price is higher @ $29.99, over your run of the mill ebay cases, but as the famous saying goes, you get what you pay for lol.
https://www.amazon.com/Seidio-DILEX-Metal-Kickstand-Motorola/dp/B00S6TA3RW
Also might add that the way the metal kickstand is attached the area is flat which means sitting it on a table it will stay put instead of rocking back and forth lol. The butter shell of the 2 pieces is also covered (or made?) out of something that is pretty grippy, no slick plastic or rubbery TPU to deal with, using it for over a year in construction sites, factories, and other outdoor/dirty jobs it doesn't hold dirt or sweaty skin oils compared to others I've used, I wash mine bout once a month in hot water with dish soap and no warping, deforming, or most of all, fading, still black as the day I got it. And one last awesome thing that's soo small to be easily looked over but makes a huge difference when case makers don't do it is the side buttons, each one is individual, precision molded, and have a very satisfying feel when depressing them. It may be a tad bigger compared to bumpers or extremely thin shell cases which are barely a step up over a full Dbrand or (can't remember the other skin company) skin lol, I found myself loving the size, it's not full on OtterBox, but it still is thin enough to let me use it one handed which is whenever I'm doing anything but typing lol.
::Edit:: Oh yea, it comes in Black, Blue, Red, and White. Seidio also makes a Surface case with the metal kickstand as well and I'm sure it's just as high quality of a product I have not tried it myself and cannot attest to it's build, here is an Amazon listing tho if you would like to see it, it is one that includes a belt holster tho there are listings without the holster for cheaper.
https://www.amazon.com/Seidio-SURFACE-Kickstand-Holster-Motorola/dp/B00S6T9YTK