Hello,
2 months ago I rooted my S3,
with the CF-SGS3-CWM-v5.5-v1.2 & odin & stuff, It worked,
Today I wanted to unroot it, & I thought you could just Reset your phone and everyting would go back to factory settings, because I wanted some
original updates...
I found out if i did that it would still use SuperSU & be a Custom Firmware. So I removed the SuperSU app, Deleted CF-SGS3-CWM-v5.5-v1.2 or it was CWM-SuperSU-v0.89 from my SD.
I wanted to reset it again with the hard mode setting or something: Volume up + home + lock key
I mounted everything /sd card /system /cache etc. Why? I dont know..
Now my phone gets stuck at the screen when you turn on your phone: Samsung Galaxy SIII GT-I9300
Did I just brick my phone?
Greetings.
No you didnt. But your S3 has nothing to boot. So you should flash an original fw from sammmobile with odin.
Sent from my GT-I9300 using xda app-developers app
Dawnload original firmware go dawn load mode whit Odin and flash.After that reset counter whit triangle away app.And you are all stock
Sent from my GT-I9300 using xda premium
You could try to make a full recovery with Samsung Kies.
muhamet said:
Dawnload original firmware go dawn load mode whit Odin and flash.After that reset counter whit triangle away app.And you are all stock
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Where do I find the original Firmware? what is flash? I know what Odin is.
iliaminati said:
Where do I find the original Firmware? what is flash? I know what Odin is.
Click to expand...
Click to collapse
you can download the firmware on sammobile.com
Sent from my GT-I9300 using xda app-developers app
over. usevcri
PhiP said:
you can download the firmware on sammobile.com
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Are you sure this works?
We are not Samsung customer service and we do not guarantee it work. In this same general section there are two sticky threads that will guide you can download the stock rom and flash it using Odin, titled " [Stock Official Firmwares] I9300XXBLG8 (4.0.4) - United Kingdom" and "[Guide+ROMS]Odin Flash+Root Guide & Stock Firmwares".
You will lose all your data in the phone when you flash Odin. Also this forum section is for the international unlocked version, make sure you aren't using an American carrier locked version.
Also, question belongs in the Q&A section.
Hi. I have rooted my S3, to see how it works with PS3 joystick (i am not too impressed)
I have rooted successfully via odin flash guide, but now i get strange problem.
Every now and then, when i want to turn on dispay, it works and show me that clock and then when i swipe to unluck, the phone doesnt respond.
When i power again, display dimms, and nothing happen. I cant unlock my phone, I need to hold power button to reboot, and than it is normal till i lock the screen and want to turn it on again.
My question is, how can i solve it, and if i can't, how can i get everything back to stock and normal?
Try turn off ripple effect in setting, see how it goes.
Sent from my GT-I9300 using xda app-developers app
First of all, try disabling lockscreen entirely.
Then try performing a full wipe. If nothing changes, flash stock firmware via Odin. If this haven't helped, root your phone, reset bootloader flashing counter via TriangleAway, then flash full stock firmware and make a warranty claim.
Arsaw said:
Try turn off ripple effect in setting, see how it goes.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Where are these?
I'm using JB now. Forgot about ICS
You try look for it in setting - lock screen.
Sent from my GT-I9300 using xda app-developers app
YaDr said:
First of all, try disabling lockscreen entirely.
Then try performing a full wipe. If nothing changes, flash stock firmware via Odin. If this haven't helped, root your phone, reset bootloader flashing counter via TriangleAway, then flash full stock firmware and make a warranty claim.
Click to expand...
Click to collapse
As i thought, now, without changing anything, the problem goes away. But i think it will came back
I forgot one big thing!
!!!! When i first flashed PDA, i flashed it with something CF, not insecure kernel (MY FAULT). Then i got this problem but i can say that i couldnt use my phone. Only just after reboot. Then i flashed insecure kernel, al now problem is still here but it is not so often, but i must fix this.
So maybe the problem is because i flashed wrong file, so "bad" files are still here?
Is there an easy fix for this?
Arsaw said:
I'm using JB now. Forgot about ICS
You try look for it in setting - lock screen.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
YaDr said:
First of all, try disabling lockscreen entirely.
Then try performing a full wipe. If nothing changes, flash stock firmware via Odin. If this haven't helped, root your phone, reset bootloader flashing counter via TriangleAway, then flash full stock firmware and make a warranty claim.
Click to expand...
Click to collapse
My problem is back, so i tried this 2 first things. To desable lockscreen entirely, and to turn off ripple effect. No, it is still not working..
Start from scratch again. Backup your data, flash original firmware with odin, root it again, triangle away if you want.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Start from scratch again. Backup your data, flash original firmware with odin, root it again, triangle away if you want.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Ok now, here is my next question.
I flash original firmware form here? http://forum.xda-developers.com/showthread.php?t=1671969 Is that right or not?
Than i know now hot to root, and i think this triangle away is easy too.
And one more question, which firmware is the newest and best? This XXALF2; Firmware Info PDA: XXALF2 Phone: XXLF2 Date: 05/06/2012
I remeber that i had OTA this month so 6th month is pretty old IMO :S
You can go to sammobile.com to find the latest firmware for your country. Then follow the instructions as in the link you posted above.
Sent from my GT-I9300 using xda app-developers app
solarbird said:
Ok now, here is my next question.
I flash original firmware form here? http://forum.xda-developers.com/showthread.php?t=1671969 Is that right or not?
Than i know now hot to root, and i think this triangle away is easy too.
And one more question, which firmware is the newest and best? This XXALF2; Firmware Info PDA: XXALF2 Phone: XXLF2 Date: 05/06/2012
I remeber that i had OTA this month so 6th month is pretty old IMO :S
Click to expand...
Click to collapse
LF2 is old firmware .
Newest will be Jelly Bean released soon .
jje
JJEgan said:
LF2 is old firmware .
Newest will be Jelly Bean released soon .
jje
Click to expand...
Click to collapse
I am now dling official firmware from sammobile.com, then i will try to flash that
When JB will be released, i will just need to download JB firmware from sammobile.com, flash it, and root it again?
solarbird said:
Ok now, here is my next question.
I flash original firmware form here? http://forum.xda-developers.com/showthread.php?t=1671969 Is that right or not?
Than i know now hot to root, and i think this triangle away is easy too.
And one more question, which firmware is the newest and best? This XXALF2; Firmware Info PDA: XXALF2 Phone: XXLF2 Date: 05/06/2012
I remeber that i had OTA this month so 6th month is pretty old IMO :S
Click to expand...
Click to collapse
go here http://www.sammobile.com/firmware/?page=3&model=GT-I9300&pcode=-1&os=1&type=1#firmware
and create an account and choose your country and it will show u all the galaxy s3 updates for your country
Fail again...
I had official S3 firmware, now i downloaded Croatia, Vodafone firmware, and it has got vodafone apps and so on... I dont like it
How can i download PURE Samsung Galaxy S3 ROM?
Or is there a way i colud see which ROM i had before? I have backup only calls and messages
Why not just flash custom rom for now and wait for Jellybean original firmware release.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Why not just flash custom rom for now and wait for Jellybean original firmware release.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Are custom roms for s3 better than original? I had HTC Hero for almost 3 years and i had custom roms for it but it was only because i wanted it to be faster and smoother
For me, yes custom roms are better than original stock rom.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
For me, yes custom roms are better than original stock rom.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Ok then, i will try. Which one would you recommend me?
Get started with ARHD.
Sent from my GT-I9300 using xda app-developers app
He guys
After reading a lot I am still looking for an answer !
I'm running JB stock rom on my SGSIII (btu) , the official polish one , downloaded
from sammobile. I can still connect to KIES, but it tells me; your device doesn't support software upgrades via KIES.
What can I do to change this ????
Thanks for answers in advance !!!!
Sent from my GT-I9300 using xda app-developers app
Try To check if You have kies package in titanium backup, if Not kies wouldnt recognize tour phone
deklak01 said:
He guys
After reading a lot I am still looking for an answer !
I'm running JB stock rom on my SGSIII (btu) , the official polish one , downloaded
from sammobile. I can still connect to KIES, but it tells me; your device doesn't support software upgrades via KIES.
What can I do to change this ????
Thanks for answers in advance !!!!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
It's because it's from Sammobile, not from Kies. If you would have flashed it via Kies, it would still say your device supports (etc. ...)
I think ur phone is rooted n your device status is modified. Now you will Samsung has changed update checks. No modified devices will be able to get update.
Sent from my GT-I9300 using Tapatalk 2
That's just the thing. It WAS rooted and it doesn't say it's modified (anymore).
Sent from my GT-I9300 using xda app-developers app
'm running JB stock rom on my SGSIII (btu) , the official polish one , downloaded
from sammobile. I can still connect to KIES, but it tells me; your device doesn't support software upgrades via KIES.
Cut and Paste Kies no update .
Rom is not for your phone .You now present Kies with wrong phone and firmware codes .
Wipe phone and reinstall your original saved firmware .Or download it from CHECKFUS .
jje
Thx JJEGAN U the man !
Sent from my GT-I9300 using xda app-developers app
is it possible to flash official stock firmware from sammobile directly to a rooted phone with odin and would it work or am i only tied to custom roms cos i just rooted my phone.
if you just rooted your phone then it is stock firmware, rooted
Don't understand the problem :-/
Just flash an official firmware via Odin and root again.
Yes, it will work, but you will need to root it again
Thanks would just give it a try and see
Sent from my GT-I9300 using xda app-developers app
java run time error in my rooted phone
fanistic said:
Thanks would just give it a try and see
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I had rooted my S3 i9300. But whenever I try to connect my phone to Wifi it gives me "java run time exception error. And I could not connect Wifi. Please help me in regard.
Hi, I was on cyanogen 10.2 then decided to go back to stock 4.1.2 samsung rom. ( intl Uk version) everything went fine but with 4.3 for the s3 nearly here I decided to use kies to check if there was any updates for my device, now when I plug it in it says "GT-I9300 Does not currently support upgrading" can anyone help me in fixing this issue? Ive tried updating drivers and re installing the firmware via odin but it doesn't work
Sent from my GT-P5110 using xda app-developers app
As per identical posts .
Wrong firmware and CSC details .
JJEgan said:
As per identical posts .
Wrong firmware and CSC details .
Click to expand...
Click to collapse
How would I go about fixing this then? And you say wrong firmware but how can this be when I put my countries firmware onto my phone?
Sent from my GT-P5110 using xda app-developers app