Related
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Pulsewave said:
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Click to expand...
Click to collapse
Not sure about the Amaze tbh, but if I had a failed flash on either of my HTC phones, I just re RUU'd.
D'oh! I forgot about that! Had to do that for my buddy's thunderbolt a few times. Lemme give that a shot and I'll report back
Edit: Worked
Edit:double post
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Bricked Htc Amaze 4g
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I can get into recovery but it wont let me flash anything.Thanks to whoever replies I really appreciate it.
lmfaoomg said:
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Click to expand...
Click to collapse
You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
samiaziz said:
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I really appreciate it.
Click to expand...
Click to collapse
Same with you. You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
Superwiping the phone removes all the data from the old ROM so you can install a fresh clean ROM.
If you want to install the RUU, you have to relock the bootloader first and then you can reflash the original RUU
Edit: i was misinformed
Sent from my NRGized Amaze...
via xda premium
aj_2423 said:
I dont believe u have to relock
Sent from my NRGized Amaze...
via xda premium
Click to expand...
Click to collapse
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
If the phone wont go into recovery, you have to use ADB and wipe the cache partition for it to go into recovery again. This is apparently a bug with some of recoveries posted by other devs in the development forum. You need to use fastboot.exe to wipe the cache via adb
And if... If the superwipe doesn't work due to recovery version you have try to boot in to your Bootloader run one of hasoon's tool and choose different recovery.. it did happen to me the bootloop before due to the fact the old roms like mike's rom. he doesn't update his script to support the newer recoveries and it doesn't support X's recovery, it will give you an error installation.. just try different recoveries and for sure your problem will be solved..
just make sure boot in your bootloader/H-boot then run hasoon's tool and have enough battery just to make sure...
hasoon2000 said:
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
Click to expand...
Click to collapse
Thanks for the good info Sir but i my HTC Amaze is bootloader locked and S-ON but i cannot find a RUU for T-mobile to unbrick it. Will a Ruu such as this one work?
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.550L.17DC_30.68.550L.09_release_227343_signed.exe
My HTC Amaze scans all the versions of the PH85IMG i place on the sd card but goes back to the menu when its down
any advice that could help i will appreciate!
There's a thread in the dev section that has about a dozen RUUs. I don't see how one can miss it.
Thanks for your reply but i was a little unsure and did not want to make my phone any worst than it already is.
Can you explain 1 thing thing for me please - RUU always you to flash the phone via the computer? where as PH85img.zip allows you to flash the phone via sdcard? I hope i am correct here.
but i want to know how can i flash the phone when its connected via HBoot usb cause my pc recognizes it as "Android Composite ADB Interface"
Currently this is what is on my lcd
LOCKED
RUBY PVT SHIP S-ON RL
HBOOT-1.93.0002
EMMC BOOT
MAR 15 2012
i have tried several PH85img.zip files but the phone just scans them and goes back to the menu.
Some help will be appreciated extremely.
---------- Post added at 03:40 PM ---------- Previous post was at 03:33 PM ----------
I forgot to mention it connects to the pc but when i run command adb devices this is what i get
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\rquinlan.GOSL_DOM>adb devices
List of devices attached
C:\Documents and Settings\rquinlan.GOSL_DOM>
The latest ruu would be your best option, do not put the .zip part of the name since its already there, also a ruu may be an exe or zip file, since it is a complete stock file to restore the device, what would your carrier be to be exact? Just not up to reading through everything in this thread to see if you mentioned that piece of info, if its tmobile then the very first file in the stock ruu/ota thread would be the file you need.
Sent from my iPad using Tapatalk HD
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Linkzz said:
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Click to expand...
Click to collapse
Why are you using recovery exactly?
RUU's are to be flash via hboot, which is the very first screen you see when you go into the device's bootloader, in the case of exe files, you'll need to flash it via fastboot mode, which happens to be, correct me if I'm wrong, the very first or second option on the hboot menu.
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Linkzz said:
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Click to expand...
Click to collapse
What carrier are you on?
t-mobile
this is the RUU i tried and made a connection but the PH85img.zip are not working no matter how i try
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.55 0L.17DC_30.68.550L.09_release_227343_signed.exe
Hi, everyone. I'm in a big problem as it seems. Yesterday I tried to flash a new rom to my evo 3D. I unlocked the phone via siomonsutility with S-On and then I flashed virtuous eclipse rom. It didn't worked so I reverted to my stock rom by recovering. After that I tried to flash the boot.img that came with virtous ecplise rom and since then my phone had gone into numerous boot loops. I tried numerous boot.img files nothing worked.
I tried to restore to stock rom, it didn't worked. I tried a lot of things and now I have a bigger problem. By night I left my phone plugged into the outlet thus charging. Now when I woke up I realized my phone won't start up. No bootloader, no nothing. I can see a dim red light tough when I try to start it up. Also when I put my charger in the red light pops up and then it vanishes.
Is there a solution to my problem ? Is my phone bricked ? Please answer me as I'm in so much trouble right now /
lemonpowah said:
Hi, everyone. I'm in a big problem as it seems. Yesterday I tried to flash a new rom to my evo 3D. I unlocked the phone via siomonsutility with S-On and then I flashed virtuous eclipse rom. It didn't worked so I reverted to my stock rom by recovering. After that I tried to flash the boot.img that came with virtous ecplise rom and since then my phone had gone into numerous boot loops. I tried numerous boot.img files nothing worked.
I tried to restore to stock rom, it didn't worked. I tried a lot of things and now I have a bigger problem. By night I left my phone plugged into the outlet thus charging. Now when I woke up I realized my phone won't start up. No bootloader, no nothing. I can see a dim red light tough when I try to start it up. Also when I put my charger in the red light pops up and then it vanishes.
Is there a solution to my problem ? Is my phone bricked ? Please answer me as I'm in so much trouble right now /
Click to expand...
Click to collapse
Hboot?
Cdma?
Sent from my PG86100 using Tapatalk
Hboot 1.49.0018
I don't really know if it's CDMA or GSM. I'm using a SIM card I think it's GSM ? But the sim card is not in the phone right now.
By the way I managed to start up bootloader with adb reboot boatloder .
lemonpowah said:
Hboot 1.49.0018
I don't really know if it's CDMA or GSM. I'm using a SIM card I think it's GSM ? But the sim card is not in the phone right now.
By the way I managed to start up bootloader with adb reboot boatloder .
Click to expand...
Click to collapse
You are GSM. If you can start the bootloader then what you need to do is get a stock ROM from an RUU and use the PG86IMG.zip method to revert back to stock.
私のEVO 3Dから送信される。
Can you guide me step by step ? Where to download the stock rom ? I tried that method once and it didn't worked ... I mean it discovered the zip file and a blue bar loaded. After that it gave me some error. Invalid zip file or smth like that.
first thing first, try to remove the battery (and power cable) for an hour or so and see if it will start charging again, sometimes the powersafe capacitors need to be completely discharged to reset.
relock the loader if its unlocked: put your phone in botloader (power+volume dow while powered off), plug the usb cable and do a "fastboot oem lock" from your pc (you have adb and fastboot installed, right?)
stock roms should be in this thread http://forum.xda-developers.com/showthread.php?t=1208485
put the PG86IMG.zip in your sd card, boot in bootmode, execute and you should be back stock.
remember, you want Shooter_U or shooteru roms (and firmwares, recoveries and wathever), not shooter - the U means GSM, without the U is for CDMA.
Thank you all for replies. I just removed the battery and now I'm waiting for the rom to download. I get it with 40 kb so yeah .. it's a pain in the ... Btw I'm downloading an .exe file and not a .zip one. Is this how it should be ?
I hope it will work !
I downloaded the .exe ROM from that host but it's not opening. Setup wizard is giving me an error. What should I do ? :| By the way, now I have status Relocked and Security warning
EDIT: THANKS GUYS. I really appreciate your help. My phone is back in bussiness !
so i went to switch out my battery and when i turned the phone back on it vibrated and displayed the white htc screen, then went black for a second and then stays on the white htc screen forever! Im a total noob when it comes to all the technical stuff about RUU's Kernels Roms and whatnot. I can get to bootloader, but i tried to do factory reset and it showed a green circle with a loading bar but then it changed into a red triangle with an exclamation. I tried flashing amon ra recovery but it doesnt work, although TWRP works. While in TWRP though, whenever i try to flash a zip file, it fails and says something like E:failed to mount /cache E:failed to mount /system E:failed to mount /data. Please help me i need this phone working to help me at my job. If someone can walk me through what i need to do i would REALLLYYYY appreciate it. Like i said though, i am a noob so i need realy stupified instructions lol. Thanks
just wanted to note that right now when i go to bootloader it says
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
Vigor PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
kverduin said:
just wanted to note that right now when i go to bootloader it says
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
Vigor PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Click to expand...
Click to collapse
First you should go to shipped-roms.com and download the vigor ics ruu.exe, the rezound downloads there are under vigor . Plug your phone into your computer and from hboot highlight fastboot press power and run the .exe file from your computer and follow the on screen instructions, this will return your phone to full stock ics. Make sure you download the vigor ics ruu.exe as the GB ruu will not work with s-on.
You can also download this: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/ it's the latest ruu it'll update your hboot, stock recovery, rom, and radios, to latest stock. Just download, rename the zip file to PH98IMG (don't include .zip it is a zip file it'll add it on its own in hboot) put it on your sd card, not in a folder just on. Put it back in your phone and boot to bootloader and runn the update, when it powers off. Run it again. (As it has to update the hboot to 2.27 first)Then you'll be on the stock latest. Then root and Rom from there. Of you need help pm me for my gtalk and I could walk you thru it..
sent from my s-off reZound rockin' viperRez Rom on global ICS firmware
Sounds like no boot.img
GrayTheWolf said:
Sounds like no boot.img
Click to expand...
Click to collapse
Its because of the security warning. The phone wont boot if it says that he has to run an RUU
Sent from my HTC Droid Incredible
Same exact problem. Installing zip now, god i hope this works!!
So my screen is the exact same, i tried to flash a kernal for not only wrong phone but wrong carrier too. Anyways no OS, when i try to flash either of the ways you have explained they both dont work. When i put it on the sd card as PH98IMG it looks like it loads it in the upper right then thats it. regular bootload screen after that nothing happens. try to load it by opening the application after im plugged in as fasboot usb and the program says Install script setup launcher has stopped working. I have been able to flash liquids rom and looks as if it is booting but waited 24 min and nothing happpend just stayed on boot screen. So im just trying to get back to RUU then work from there.
mrcorson said:
So my screen is the exact same, i tried to flash a kernal for not only wrong phone but wrong carrier too. Anyways no OS, when i try to flash either of the ways you have explained they both dont work. When i put it on the sd card as PH98IMG it looks like it loads it in the upper right then thats it. regular bootload screen after that nothing happens. try to load it by opening the application after im plugged in as fasboot usb and the program says Install script setup launcher has stopped working. I have been able to flash liquids rom and looks as if it is booting but waited 24 min and nothing happpend just stayed on boot screen. So im just trying to get back to RUU then work from there.
Click to expand...
Click to collapse
You need to extract the boot.IMG from liquid Rom and rename it ph98img and put that on your sd card or in the folder with adb and fastboot flash it using fastboot flash boot boot.img
Sent from my ADR6425LVW using xda app-developers app
Also wipe cache and dalvik cache in recovery immediately after doing this
Sent from my P4R4N01D R3D D347H 4.3 using xda app-developers app
I ended up flashing liquidsmooth rom in recovery then had to wipe factory data reset, then i could wipe dalvick cache then when i rebooted it actually booted the rom and I LOVE IT. Still having some issues tho.
Still cant get my computer to talk to my phone when in fastboot usb i cant get any devices when i do "adb devices" cmd.
It says devices listed below but no devices.
Also im still stuck on TWRP 2.2 and I cant my 2.6 to flash in recovery. - Still troubleshooting this and might get it in a bit.
Thanks for the suggestions!!!
mrcorson said:
I ended up flashing liquidsmooth rom in recovery then had to wipe factory data reset, then i could wipe dalvick cache then when i rebooted it actually booted the rom and I LOVE IT. Still having some issues tho.
Still cant get my computer to talk to my phone when in fastboot usb i cant get any devices when i do "adb devices" cmd.
It says devices listed below but no devices.
Also im still stuck on TWRP 2.2 and I cant my 2.6 to flash in recovery. - Still troubleshooting this and might get it in a bit.
Thanks for the suggestions!!!
Click to expand...
Click to collapse
ooooh older stuff ick lol...do you have your htc sync drivers installed....what os are you on? are you s-on? what hboot you on? you need to be wiping before rom install and not after....are your issues pertaining to random reboots?
REV3NT3CH said:
ooooh older stuff ick lol...do you have your htc sync drivers installed....what os are you on? are you s-on? what hboot you on? you need to be wiping before rom install and not after....are your issues pertaining to random reboots?
Click to expand...
Click to collapse
Yes i did reinstall my HTC Sync drivers, I have been wipining factory reset, cache, system, dalvick cache before i flash a new rom. I am S-On. Havent really determined a reason to go s-off yet, i am messing up my phone good enough with this let alone a paperclip. no problem with random reboots. I finally decided to go to a custom rom bc i was sick of my phone rebooting for OTA updates then being late for work. So the 3 roms i have now tried are Liquid smooth which i liked but i couldnt get mms messages to show up on phone. Also it wouldnt change from silent to a beep for text message notifications. i could select it but it would stay as silent. So.... I flashed ViperRezROm which i just didnt like the look and theme. So i finally flashed Cyanogen ROM and come to find out its the same kernal as Liquid smooth so it looks the same and I like that but I still cant change the notification from silent to a beep for text messages. So i never know when i get a text.
Still working on trying to flash a newer version of TWRP.
Then this time flashing I tried to titanium backup and went to load my backup and it cant find it.... WTF
UGH... Learning so much with this stuff. just taking alot of patience.
Thanks again for yalls support, I love this forum.
Mike
BTW just to note...if your bootloader is locked fastboot flash methods will not work 90 percent of the time...if you flashed liquid 3.0 that's more than likely your problem with mms as that is a beta...but on more recent 4.3 builds mms is fixed...and no its not the same kernel...just similar source code...liquid 2.9 does not have this mms issue...any random reboots on 4.2 are caused by min frequency not set right at 384 mhz and using amon ra to flash or not doing a proper clean flash....I do recommend s-off as it will make life much easier for you for modding things or flashing custom zips and for future flashing back to full stock if needed as its not possible while s-on...you can always pm me for help as I've yet to run into an error I can't fix unless posted in op caused by source
Sent from my P4R4N01D R3D D347H 4.3 using xda app-developers app
There is a few good reasons to S-Off.
1.No need to fastboot flash kernels
2.can RUU if needed
3.can flash recovery updates (cwm, twrp) as ph98img zips
4. Can keep bootloader ***locked***
5. No more ***tampered*** tag after you RUU
Scenario: you are out and about (or a computer isn't handy) somehow you are in an infinite bootloop. You nandroid restore. But it is something on boot partition. Only way to fix this while S-On is fastboot flashing a boot.img, but if you were S-Off, you would have restored the boot image from the nandroid.
Edit: added 5th reason
Sent from my ADR6425LVW using xda app-developers app
Uzephi said:
There is a few good reasons to S-Off.
1.No need to fastboot flash kernels
2.can RUU if needed
3.can flash recovery updates (cwm, twrp) as ph98img zips
4. Can keep bootloader ***locked***
5. No more ***tampered*** tag after you RUU
Click to expand...
Click to collapse
I finally went S-OFF to help another user get step by step to restore to fully locked and stock ruu. I decided to leave it S-OFF. It's so nice to be able to just load a rom and not have to do anything else (other than wiping). It makes changing/upgrading rom's a breeze.
I highly recommend it. It seems scary, but once you have done it once, you will not go back.
But be warned, never go back to S-ON on a non-HTC hboot... you will hard brick your device. That is the only real threat I've heard about... if you never go back to S-ON, then you have absolutely nothing to worry about. Just about any error can be fixed except for going s-on on a non-ruu hboot.
Thanks
molson8045 said:
You need to extract the boot.IMG from liquid Rom and rename it ph98img and put that on your sd card or in the folder with adb and fastboot flash it using fastboot flash boot boot.img
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
You saved me! That worked like a charm.
please help
Hi guys
Im have that problem in my htc rezound i seen the above comments but i couldnt able to understand so please tell the procedure one by one please pleasr..........
parthis said:
Hi guys
Im have that problem in my htc rezound i seen the above comments but i couldnt able to understand so please tell the procedure one by one please pleasr..........
Click to expand...
Click to collapse
If English is not your first language I apologise.
Otherwise, you need to be more specific and use full sentences.
GrayBoltWolf said:
Sounds like no boot.img
Click to expand...
Click to collapse
you were dead on accurate regarding my problem. Your post helped me revive an all but dead rezound!! Thanks man!!
Hi,
I am new here and this is my first post so forgive me if starting a new thread for this topic was wrong but I found my own situation slightly different from the others here who had the same problem.
I have a gsm unlocked rezound and was trying to get rid of the unknown sim error message at lock screen. I followed the steps mentioned on this thread --> http://forum.xda-developers.com/showthread.php?t=1882355. I rooted the phone, downloaded the apk. Deleted the .odex file and replaced the existing apk with the downloaded one and rebooted. Now, I am stuck at the lock screen with no icons. But for the other people who faced similiar issue, they were able to open the home screen. I can't. I can see pop ups for sms/mail. I get ring when a call comes in but I cant pick. I tried hard reset. Tried booting without sim/sd card. Still no luck. I tried connecting the phone to my pc but now my pc wont recognise the phone when its connected. I can see icon on top of the phone which says USB connected and I also see sync icon, but it will not go any further. I dont know how to get into the phone's menu now.
I may have bitten more than I can chew, silly me :crying:
If you guys can help me in any way, I would appreciate that a lot.
OS : 4.0.3 ICS Running HTC Sense 3.6.
A quick fix:
http://forum.xda-developers.com/showthread.php?t=2017932
Flash my debloater, choosing the Sense option(will be brought to a widget removal screen if you don' use them all) & AOSP lockscreen. Disadvantage to that though, you will have to unlock to see the caller id when it rings.
Snuzzo said:
A quick fix:
http://forum.xda-developers.com/showthread.php?t=2017932
Flash my debloater, choosing the Sense option(will be brought to a widget removal screen if you don' use them all) & AOSP lockscreen. Disadvantage to that though, you will have to unlock to see the caller id when it rings.
Click to expand...
Click to collapse
Thank you for the quick response. I have downloaded the file. I know this sounds stupid but I am a real rookie. I don't know how to do the flashing or how to get to the AOSP lock screen. If you could guide me through the process or maybe give me a link where I can learn it myself, it would be great.
Essentially since you already have rooted, you will(should) also have a custom recovery (TWRP, AmonRa, CWM). Install it as you would a regular rom but without any wipes until after flash of the zip. Dependent on which recovery you will want to look up their FAQ/QnA on how to wipe dalvik/cache.
Once you get inside the script, you will see what I meant by "Choose Sense & AOSP Lockscreen".
Snuzzo said:
Essentially since you already have rooted, you will(should) also have a custom recovery (TWRP, AmonRa, CWM). Install it as you would a regular rom but without any wipes until after flash of the zip. Dependent on which recovery you will want to look up their FAQ/QnA on how to wipe dalvik/cache.
Once you get inside the script, you will see what I meant by "Choose Sense & AOSP Lockscreen".
Click to expand...
Click to collapse
Yes the phone was rooted, but I used a rooting software from google apps from the phone. After I downloaded that app, it rooted the phone and brought in an extra icon. I remember it as SU root something, but I didnt do it from the pc. So I dont have any recovery on the pc. I used to sync the phone with htc sync. Unfortunately, right now, my pc wont recognise the phone. I tried root explorer for android from pc, it wont recognise the device. HTC sync too will not. But my phone seems to know when a USB is connected, it brings the usb icon on top but thats about it. ((
Ok, best suggestion at this point is to follow the instruction in the OP for installing TWRP in the Rezound development section.
Snuzzo said:
Ok, best suggestion at this point is to follow the instruction in the OP for installing TWRP in the Rezound development section.
Click to expand...
Click to collapse
Could you kindly provide me a link to the right topic. Do you think my phone is beyond repair ? Have I bricked it ?
I am running 4.0.3 ICS on Sense 3.6
http://forum.xda-developers.com/showthread.php?t=1902381
You are far FAR from being bricked. Softbricked yes, hardbricked no.
Snuzzo said:
http://forum.xda-developers.com/showthread.php?t=1902381
You are far FAR from being bricked. Softbricked yes, hardbricked no.
Click to expand...
Click to collapse
Thank you for the help buddy. I am glad you said its not. I dont know what I would have done if it had. This is my first android phone and I took it a week back. I was beginning to miss my iPhone . Unfortunately the link you provided wont help me because I have no way of restarting phone other than by removing battery. Even when in fastboot, the pc does not recognise the device even when device shows fastboot usb. I doubt if I can get past step 1 in that link.
I found that I am on Vigor H Boot 2.27.000 and Radio 2.22.10.0803r with S-ON. I tried to turn S-Off after reading and educating myself on android from this forum till now. But even to S-Off, I need to be able to enable USB in debug mode which I am not able to. Any suggestions ?
Device still not fixed
hi,
I took the phone to a couple of places to check if it can be fixed, No one was able to fix it thus far, Any other advice or suggestions to fix this would be great. Any admins/mods have something to add ? Please, I am desperate to fix this phone. Anyway of doing this ?
Have you tried flashing a different rom?
If he's S-on and locked, he can simply flash the latest RUU can't he(just to get the phone working again). From there someone can help him set up adb, and s-off.
Sent from my ADR6425LVW using xda app-developers app
From what they posted, somehow they don't have a custom recovery even though they are rooted?
Can you put a PH98IMG.zip file of a recovery (either Amon Ra or TWRP) on your SD card and flash it in hboot? Then flash a custom ROM the same way from recovery.
You can take the SD card out and mount it on your pc and use your pc to copy over the recovery PH98IMG.zip file.
And oh yeah, I see what Obaterista... was saying. You should be able to flash the latest RUU from hboot. Here's a link for it:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
That's global too, which seems to be what you'll need.
jon7701 said:
Have you tried flashing a different rom?
Click to expand...
Click to collapse
Yes I have vigor, tried AmonRa, that did not work mate. It starts fastboot, gets stuck @ unpacking PH98IMG.diag and then nothing happens.
Obaterista93 said:
If he's S-on and locked, he can simply flash the latest RUU can't he(just to get the phone working again). From there someone can help him set up adb, and s-off.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
The bootloader screen says S-On. On top it says ***Tampered*** and below it ***UNLOCKED***.
feralicious said:
From what they posted, somehow they don't have a custom recovery even though they are rooted?
Can you put a PH98IMG.zip file of a recovery (either Amon Ra or TWRP) on your SD card and flash it in hboot? Then flash a custom ROM the same way from recovery.
You can take the SD card out and mount it on your pc and use your pc to copy over the recovery PH98IMG.zip file.
And oh yeah, I see what Obaterista... was saying. You should be able to flash the latest RUU from hboot. Here's a link for it:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
That's global too, which seems to be what you'll need.
Click to expand...
Click to collapse
Yes I rooted from a tool I found on android market. Noob me. So I do not have a recovery. I had downloaded the PH98IMG.zip and put it in my sd card and tried. The recovery starts and then shows a red exclamation and then nothing happens.
I was just trying different pages for help. Someone has mentioned that I should add the PH98IMG.zip as just PH98IMG and I shud not add the .zip. Thats the only thing left to try. I will post what happens when I do that.
lllR2-D2lll said:
Yes I have vigor, tried AmonRa, that did not work mate. It starts fastboot, gets stuck @ unpacking PH98IMG.diag and then nothing happens.
The bootloader screen says S-On. On top it says ***Tampered*** and below it ***UNLOCKED***.
Yes I rooted from a tool I found on android market. Noob me. So I do not have a recovery. I had downloaded the PH98IMG.zip and put it in my sd card and tried. The recovery starts and then shows a red exclamation and then nothing happens.
I was just trying different pages for help. Someone has mentioned that I should add the PH98IMG.zip as just PH98IMG and I shud not add the .zip. Thats the only thing left to try. I will post what happens when I do that.
Click to expand...
Click to collapse
What you'll have to do is relock your boot loader, flash the RUU and then unlock again. From there you should be able to flash a recovery and flash a rom.
Sent from my ADR6425LVW using xda app-developers app
My phone is also soft bricked. I relocked the phone and now it just sits in hboot and won't do anything no matter if I yet to flash the ruu zip file or use the exe ruu.
Currently
Relocked
Hboot 2.10.0000
Believe I am 4.03.605.2 main version, at least that's what the exe file said.
I'm pulling my hair out just trying to any software installed. Help please!
Sent from my SCH-I535 using xda app-developers app
1967ls2 said:
My phone is also soft bricked. I relocked the phone and now it just sits in hboot and won't do anything no matter if I yet to flash the ruu zip file or use the exe ruu.
Currently
Relocked
Hboot 2.10.0000
Believe I am 4.03.605.2 main version, at least that's what the exe file said.
I'm pulling my hair out just trying to any software installed. Help please!
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Are you trying with the stock ROM ? If ure saving stock ROM as PH98IMG.zip, then try PH98IMG without the .zip typed in.
Obaterista93 said:
What you'll have to do is relock your boot loader, flash the RUU and then unlock again. From there you should be able to flash a recovery and flash a rom.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Thanks a tonne. That helped. I am back in the menu now. I am so grateful for ure help. But my problems dont seem to end just yet. Now, my htc sync wont detect the phone. The phone is relocked. I will try unlocking and see if it works, but is that the cause ?
lllR2-D2lll said:
Are you trying with the stock ROM ? If ure saving stock ROM as PH98IMG.zip, then try PH98IMG without the .zip typed in.
Click to expand...
Click to collapse
I'm trying to install any Rom. I find can of it is ics or gb. Nothing will load.
Sent from my SCH-I535 using xda app-developers app
1967ls2 said:
I'm trying to install any Rom. I find can of it is ics or gb. Nothing will load.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I am no expert to give u any suggestions but maybe if you could explain how it got bricked in the first place, someone might be able to give u a better solution mate.
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help