[help plz] problem in connection between my phone with pc - Galaxy S II Q&A, Help & Troubleshooting

today sammobile upload the new jb for sgs2 so i take my phone and go to -philz cmw- and do a full wipe with format to all the file in {mounts and storage} -like this i prepare my s2 to flash a new rom - everthing was ok but when go to download mode and connect the phone to pc and open odin .. nothing happen .. please help

rabea-abo-awad said:
today sammobile upload the new jb for sgs2 so i take my phone and go to -philz cmw- and do a full wipe with format to all the file in {mounts and storage} -like this i prepare my s2 to flash a new rom - everthing was ok but when go to download mode and connect the phone to pc and open odin .. nothing happen .. please help
Click to expand...
Click to collapse
Have you installed the Kies drivers on your computer? I'm not 100% sure, but I think you may need USB Debugging enabled too. Try these and then try again. Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.

Do you have Samsung Kies and all its necessary drivers installed?
*EDIT* Sorry, it seems like i didn't see your comment.

WardenBerret said:
Do you have Samsung Kies and all its necessary drivers installed?
*EDIT* Sorry, it seems like i didn't see your comment.
Click to expand...
Click to collapse
No problem mate, we posted at the exact same time! I see we think alike anyway.

??
themadba said:
Have you installed the Kies drivers on your computer? I'm not 100% sure, but I think you may need USB Debugging enabled too. Try these and then try again. Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.
Click to expand...
Click to collapse
i have install kies Diligently nothing happend .. look in the pic

rabea-abo-awad said:
i have install kies Diligently nothing happend .. look in the pic
Click to expand...
Click to collapse
Ok, try these steps I found on Microsoft's support website:
As all the hardware devices have drivers associated similarly USB devices also have it. Sometimes proper drivers do not get detected after the initial installation so reinstallation of the drivers helps resolve the issues.
You may check after uninstalling and reinstalling the USB drivers if you are able to connect. You may disconnect all USB devices and then perform the following steps:
1. Click Start, and then click Control Panel.
2. Click System and Maintenance, click System, and then click Device Manager.
* Note * If Control Panel is in Classic View, double-click System, and then click Device Manager.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
3. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
Check if at all there is an exclamation mark along the driver, it suggests issues with the driver installed.
4. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If you still face the same issue then you may check for the updated USB device drivers using windows update.

no luck
themadba said:
Ok, try these steps I found on Microsoft's support website:
As all the hardware devices have drivers associated similarly USB devices also have it. Sometimes proper drivers do not get detected after the initial installation so reinstallation of the drivers helps resolve the issues.
You may check after uninstalling and reinstalling the USB drivers if you are able to connect. You may disconnect all USB devices and then perform the following steps:
1. Click Start, and then click Control Panel.
2. Click System and Maintenance, click System, and then click Device Manager.
* Note * If Control Panel is in Classic View, double-click System, and then click Device Manager.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
3. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
Check if at all there is an exclamation mark along the driver, it suggests issues with the driver installed.
4. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If you still face the same issue then you may check for the updated USB device drivers using windows update.
Click to expand...
Click to collapse
when i restart the pc and connect the phone thats what happend

rabea-abo-awad said:
when i restart the pc and connect the phone thats what happend
Click to expand...
Click to collapse
Try a different Micro-USB cable if possible, and in different USB ports in your computer.
Also try this:
1. Hold your phone and look at the micro USB connector on the bottom edge of your phone.
2. You will see a "tongue" inside the USB port.
3. Put something "non metalic" (I used a flat wooden toothpick) in the port. Gently, lift up the "tongue". I used a twirling motion on my toothpick to raise the tongue up a little bit. Don't go PRYING it up, just be gentle because you don't want to break your toothpick inside the phone or break the tongue.

no luck
themadba said:
Try a different Micro-USB cable if possible, and in different USB ports in your computer.
Click to expand...
Click to collapse
I have tried all ports and tried a different micro -usb - still not working ... i have to tell you something about the phone .. there is no rom inside him .. i told you i have delet the rom when a do for him format so he stuck at the logo is this help you more .. my english lunguge is bad

rabea-abo-awad said:
I have tried all ports and tried a different micro -usb - still not working ... i have to tell you something about the phone .. there is no rom inside him .. i told you i have delet the rom when a do for him format so he stuck at the logo is this help you more .. my english lunguge is bad
Click to expand...
Click to collapse
HERE YOU GO: http://forum.xda-developers.com/showthread.php?t=961956/
Just download the drivers instead of waiting for Windows to find them.

nothing happend
themadba said:
What do you mean in your original post that nothing happens in Odin? If you have Kies installed and the processes killed in the Task Manager, and your phone in download mode, just put your ROM in the PDA section of Odin, and click start. Does it fail, or does absolutely nothing happen?
Click to expand...
Click to collapse
nothing happend on odin >> after i go to download mode and connect the phone to pc notthing happend even the pc Did not recognize him and make a sound like when we connect a usb

rabea-abo-awad said:
nothing happend on odin >> after i go to download mode and connect the phone to pc notthing happend even the pc Did not recognize him and make a sound like when we connect a usb
Click to expand...
Click to collapse
Maybe you didn't see my changed post on the last page:
HERE YOU GO: http://forum.xda-developers.com/showthread.php?t=961956/
Just download the drivers instead of waiting for Windows to find them!

ok
rabea-abo-awad said:
I have tried all ports and tried a different micro -usb - still not working ... i have to tell you something about the phone .. there is no rom inside him .. i told you i have delet the rom when a do for him format so he stuck at the logo is this help you more .. my english lunguge is bad
Click to expand...
Click to collapse
ok just a sec

This maybe?
Open Task manager and kill Kies
If you don't know, follow these steps:
·Open Task manager, CTRL+SHIFT+ESC
·Go to "Processes" tab
·Select "Kies.exe" and click on "End process" located on the bottom right of that same window
·Repeat the previous step for "KiesAirMessage.exe" and "KiesPDLR.exe"
"People aren't lazy, people have impotent goals and therefore are not inspired by their impotent goals."

sorry sir
suenoromis said:
Open Task manager and kill Kies
If you don't know, follow these steps:
·Open Task manager, CTRL+SHIFT+ESC
·Go to "Processes" tab
·Select "Kies.exe" and click on "End process" located on the bottom right of that same window
·Repeat the previous step for "KiesAirMessage.exe" and "KiesPDLR.exe"
"People aren't lazy, people have impotent goals and therefore are not inspired by their impotent goals."
Click to expand...
Click to collapse
i think that the problem in the phone himself i tried all of your Methods nothing changed thx for your time

rabea-abo-awad said:
i think that the problem in the phone himself i tried all of your Methods nothing changed thx for your time
Click to expand...
Click to collapse
Did you try install the drivers I linked you to? It clearly isn't the phone it is your computer not finding the drivers! The previous poster suggested something I suggested ages ago and you thank him for that post, I have posted like 5 responses and you keep responding that nothing is working, and haven't thanked me for anything. I'll let you figure it out yourself, I'm done.
Just to refresh your memory, that was the second post: Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.

thanks again
themadba said:
Did you try install the drivers I linked you to? It clearly isn't the phone it is your computer not finding the drivers! The previous poster suggested something I suggested ages ago and you thank him for that post, I have posted like 5 responses and you keep responding that nothing is working, and haven't thanked me for anything. I'll let you figure it out yourself, I'm done.
Just to refresh your memory, that was the second post: Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.
Click to expand...
Click to collapse
thanks again .. the info you have give it to me is so helpful i will try it again but Later cause i have to sleep no Tomorrow thx alot

rabea-abo-awad said:
thanks again .. the info you have give it to me is so helpful i will try it again but Later cause i have to sleep no Tomorrow thx alot
Click to expand...
Click to collapse
Might wanna try another computer.
Samsung usb cable or generic?

gastonw said:
Might wanna try another computer.
Samsung usb cable or generic?
Click to expand...
Click to collapse
I tried alots of cables nothing happened .. but I will try another computer today .. i hope this will work

good luck.
Sent from the little guy

Related

[Q] Odin issue

I can not get Odin to "See" my phone when it is in download mode!!!! I can get my phone into download mode without any issue. I can mount the phone as a mass storage drive without a problem. Any suggestions would be GREAT!!!
Which version of Odin are you using?
Do you have the drivers installed? Does it show up in device manager?
The best thing for you to do here is to download AIO Vibrant Toolbox. It comes with all of the drivers that you need and will allow you to put your Vibrant straight into download mode without the need for the button combinations. It comes with a good version of Odin and everything.
Give it a try and let me know if you have any more problems putting it into download mode.
Another problem that I ran into when putting my phone into Download Mode was the cable connections. The phone that I had second hand was a bit worn and I had to fiddle with the connector to get it all secure. Try another cable if you've got one lying around.
bluelink77 said:
Which version of Odin are you using?
Do you have the drivers installed?
Are you in download mode (yellow shovelling Android)?
The best thing for you to do here is to download AIO Vibrant Toolbox. It comes with all of the drivers that you need and will allow you to put your Vibrant straight into download mode without the need for the button combinations.
Give it a try and let me know if you have any more problems putting it into download mode.
Click to expand...
Click to collapse
Odin3 v1.81
Yes, the drivers are installed.
Yes, I can get to that screen.
I am using AIO Vibrant Toolbox. I used the drivers with that for an x64 system, did not work. I found newer versions of the drivers, still not working.
The weird part about all of this is that I had this working, on this computer, the last time I flashed ROM.
Reboot your computer. Try a different usb port. If that doesn't work try a different cable like chadhoard said. I had one that got loose and wouldn't make contact anymore.
jneal9 said:
Reboot your computer. Try a different usb port. If that doesn't work try a different cable like chadhoard said. I had one that got loose and wouldn't make contact anymore.
Click to expand...
Click to collapse
I tried those things, other then a different cable. I do not believe it is the cable, because I can mount the phone as a mass storage device without any issues.
Hm... Different computer then maybe?
jneal9 said:
Hm... Different computer then maybe?
Click to expand...
Click to collapse
I am going to try that later. Someone on another forum suggested disabling driver signature. Still fuzzy on how to do that, plus it is my work computer, so I do not want to screw anything up by doing that.
If the drivers are already installed I don't think driver signature should matter. Is that the computer you used before?
jneal9 said:
If the drivers are already installed I don't think driver signature should matter.
Click to expand...
Click to collapse
Any suggestions on how to make that I remove every last bit of the drivers off the computer?? I will just try re-installing them.
Depending on how you initially installed the drivers there should be an uninstall entry in Add/Remove Programs.
This is what I've always used to install the drivers. http://forum.xda-developers.com/showthread.php?t=728929
jneal9 said:
Depending on how you initially installed the drivers there should be an uninstall entry in Add/Remove Programs.
This is what I've always used to install the drivers. http://forum.xda-developers.com/showthread.php?t=728929
Click to expand...
Click to collapse
Would it matter that I am using Windows XP Professional x64 Edition?
jneal9 said:
Depending on how you initially installed the drivers there should be an uninstall entry in Add/Remove Programs.
This is what I've always used to install the drivers. http://forum.xda-developers.com/showthread.php?t=728929
Click to expand...
Click to collapse
Just un-installed the drivers through the control panel. Rebooted. While installing the drivers from that link, this popped up...
chadhoard said:
Just un-installed the drivers through the control panel. Rebooted. While installing the drivers from that link, this popped up...
Click to expand...
Click to collapse
Yeah just click continue. May come up once or twice more.
And no, it shouldn't matter that you're on XP. That's what I use.

[Q] Help needed with USB Mass Storage problem

Morning all.
As of yesterday, my S2 won't connect to any pc in mass storage mode.
At first it connected as it should, but after about 5 minutes - before I'd transferred anything - I got a message that windows couldn't recognise the device/driver installation unsuccessful.
Since then I get this message immediately, have tried 4 different pcs.
Would seem the USB drivers are FUBAR somehow, but MTP via Kies works, as does Odin.
I've tried a full factory reset/reinstall, previous backups - stock and custom - removed, reinstalled and updated Kies, cleaned the USB port on the phone - nothing doing. Have tried stock kernels, Siyah, Nimphetamine - nothing. Currently on XWKL1, custom ROM (krinyo's SlimROM) with Siyah 2.6.3+
Also tried uninstalling various USB ports on my home pc, but stopped when I discovered it was the same on all pcs.
It's not the end of the world - I have bluetooth and my microSD - but it's a PITA and I'm out of ideas.
Many thanks for any help/suggestions.
Have you cheched if USB Debugging is enabled or not?
AzureusPT said:
Have you cheched if USB Debugging is enabled or not?
Click to expand...
Click to collapse
Yes, forgot to add that, sorry. Tried with and without, no difference.
Tried changing the usb cable?
From another post
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Click to expand...
Click to collapse
Maybe this can help
Getting a Service Mode FC when I enter that code in the keypad.
Will try it with an older backup.
Edit - tried it with a backup of CheckROM , 2.3.6. No FC, PDA already selected. Tried 5c above, still no good - unknown device on pc..
Lennyz1988 said:
Tried changing the usb cable?
Click to expand...
Click to collapse
No. Can't see that there's a problem there if Kies and Odin connect OK.
Lennyz1988 said:
Tried changing the usb cable?
Click to expand...
Click to collapse
B3311 said:
No. Can't see that there's a problem there if Kies and Odin connect OK.
Click to expand...
Click to collapse
Bugger me, it was the cable....
Bought a new S2 yesterday - nice to have a backup, and the Nexus is meh - and tried the new cable on old S2, everything fine. Old cable on new S2, no good for USB but fine for Kies and Odin as mentioned before.
No idea why it should be like this, but sh*t happens. Easiest solution is often the best!
same problem happened to me too
I have the exact same problem, tried everything like OP, even new cable still same issue...any ideas?
Red_Vex said:
From another post
Maybe this can help
Click to expand...
Click to collapse
Tried this..and it works! thanks alot man.
Red_Vex said:
From another post
Maybe this can help
Click to expand...
Click to collapse
Thanks buddy, that was very helpful

[Q] Firmware upgrade encountered an issue.

how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app

Bricked

Hey, I have looked everywhere on the internet and I can't seem to find any solution for my problem so I thought I would post here. I bricked my Galaxy Ace when I was trying to upgrade the ROM quite some time ago, I have tried to unbrick with odin, odin oneclick, oneclick unbrick and none of those seem to recognize my phone. I think that the trouble is that there is something wrong with my phone and my computer cannot detect it. I was just wondering if there are any other ways to unbrick??
-Any help greatly appreciated
jeffreymonk said:
Hey, I have looked everywhere on the internet and I can't seem to find any solution for my problem so I thought I would post here. I bricked my Galaxy Ace when I was trying to upgrade the ROM quite some time ago, I have tried to unbrick with odin, odin oneclick, oneclick unbrick and none of those seem to recognize my phone. I think that the trouble is that there is something wrong with my phone and my computer cannot detect it. I was just wondering if there are any other ways to unbrick??
-Any help greatly appreciated
Click to expand...
Click to collapse
You miss to check your drivers try to reinstall them
Sent from my GT-S5830i using xda app-developers app
Hitesh2626 said:
You miss to check your drivers try to reinstall them
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
I have the drivers installed, that is the part I don't get. I have tried to install them just plugged in and also had programs install them for me and downloaded off the internet. So I definitely have the drivers.
jeffreymonk said:
I have the drivers installed, that is the part I don't get. I have tried to install them just plugged in and also had programs install them for me and downloaded off the internet. So I definitely have the drivers.
Click to expand...
Click to collapse
so your problem is that your phone doesn't recognize by odin ?
Hitesh2626 said:
so your problem is that your phone doesn't recognize by odin ?
Click to expand...
Click to collapse
Pretty much, but its not only that. I am pretty sure that my PC can't even detect my phone. Well it detects it to an extent, it always says driver installation failed and it doesn't seem to recognize it for long.
jeffreymonk said:
I have the drivers installed, that is the part I don't get. I have tried to install them just plugged in and also had programs install them for me and downloaded off the internet. So I definitely have the drivers.
Click to expand...
Click to collapse
Maybe your USB Port is damaged or not connected. Try another port or reinstall driver.
$£NT F®OM ©OOPE®VE
Raxit k. Tandel said:
Maybe your USB Port is damaged or not connected. Try another port or reinstall driver.
$£NT F®OM ©OOPE®VE
Click to expand...
Click to collapse
Tried multiple USB Ports on two different computers
jeffreymonk said:
Tried multiple USB Ports on two different computers
Click to expand...
Click to collapse
Change cable. Remove all drivers. Install only one driver. Prefer kies. Than try to connect to pc...
:: Freedom... ::
jeffreymonk said:
Pretty much, but its not only that. I am pretty sure that my PC can't even detect my phone. Well it detects it to an extent, it always says driver installation failed and it doesn't seem to recognize it for long.
Click to expand...
Click to collapse
See do these
Go to My computer properties
Device manager
and then see the last option Universal serial bus controllers (open it)
And then connect ur phone and see where is the Yellow question mark is comming
on that just right and uninstall
After that Again connect the phone and let it be it will install the drivers automatically
That's it
Does your phone shows that it is in download-mode?
Sent from my GT-S5830i using xda app-developers app
uninstall all junk drivers that wont work and install the proper Samsung drivers for your phone , google it
select usb debugg....
clean the wire ...
pray
GiluxVanAce said:
Does your phone shows that it is in download-mode?
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Yes it has "downloading" in yellow letters in middle of screen
Hitesh2626 said:
See do these
Go to My computer properties
Device manager
and then see the last option Universal serial bus controllers (open it)
And then connect ur phone and see where is the Yellow question mark is comming
on that just right and uninstall
After that Again connect the phone and let it be it will install the drivers automatically
That's it
Click to expand...
Click to collapse
I don't see a yellow question mark :/
XxXAtrixXxX said:
uninstall all junk drivers that wont work and install the proper Samsung drivers for your phone , google it
select usb debugg....
clean the wire ...
pray
Click to expand...
Click to collapse
Can't usb debug, can't get into the phone.
jeffreymonk said:
I don't see a yellow question mark :/
Click to expand...
Click to collapse
It means that there is no problem in drivers so you tried to uninstall the drivers and again installing ?
Hitesh2626 said:
It means that there is no problem in drivers so you tried to uninstall the drivers and again installing ?
Click to expand...
Click to collapse
Sorry man I don't know how to uninstall the drivers? any chance you could help me?
jeffreymonk said:
Sorry man I don't know how to uninstall the drivers? any chance you could help me?
Click to expand...
Click to collapse
Just goto MY computer's properties and then device manager and then see in Other devices there BCM21553-Thunderbird so just right click on it and then uninstall
Hitesh2626 said:
Just goto MY computer's properties and then device manager and then see in Other devices there BCM21553-Thunderbird so just right click on it and then uninstall
Click to expand...
Click to collapse
'I am kind of getting pc recognition, it is doing the noise when the cord gets plugged in but it does not show up on the list you mentioned earlier. But it does have a little tick on the tray down the bottom. It only shows up on odin when I go into emergency download mode.
jeffreymonk said:
'I am kind of getting pc recognition, it is doing the noise when the cord gets plugged in but it does not show up on the list you mentioned earlier. But it does have a little tick on the tray down the bottom. It only shows up on odin when I go into emergency download mode.
Click to expand...
Click to collapse
So if the tick comes at Task bar in Pc when you pluged your phone in download mode so drivers are ok, so now whats the problem
Sent from my GT-S5830i using xda app-developers app
Hitesh2626 said:
So if the tick comes at Task bar in Pc when you pluged your phone in download mode so drivers are ok, so now whats the problem
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
I get the tick but I am pretty sure it still doesn't recognize it properly. The main problem is that my Odin will not detect phone.

Xiaomi Amazfit - bricked - not charging, not turning on, discoverd by Windows (USB)

Hello everyone,
I read many useful information’s about this watch here on forum, however didn’t find solution for my case. I got a Xiaomi Amazfit. The watch is not charging or turning on. It is possible to connect it via USB cable to a Windows machine, the device stays as "unrecognized". My theory is that the ROM is hardly broken.
Here is my question: Is there a method to flash the watch via flashtool (or similar). All tutorials require the watch to be able to go to fastboot, and this can’t be done in this case. I can’t connect this as adb device also. I have done several times a flash procedure on phones that could not be turned on. Hope You can help me
Best regards Daniel
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
silver-alx said:
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
Click to expand...
Click to collapse
Thank you i know thiS doscission. Mine is not going to show anything on the screan. Unable to go to fastboot...
For the no charging part, make sure you clean the metal pins and the small hole slot on the back. Sometimes there is some build inside the small hole slot that prevents the pins touching the charger.
jcyaoo said:
For the no charging part, make sure you clean the metal pins and the small hole slot on the back. Sometimes there is some build inside the small hole slot that prevents the pins touching the charger.
Click to expand...
Click to collapse
I already tried this. As i sead. I get the device detected on windows (unknown device). I presume someone tried to flash it on the past. I look for a way to copy software to it. Its not turning on (blackacrean).
Any ideas?
kantor_d said:
Thank you i know thiS doscission. Mine is not going to show anything on the screan. Unable to go to fastboot...
Click to expand...
Click to collapse
Look at the end of the thread
I disasembled the base Nd found lut thats 2 Pina where demaged. Its nowy functional but like i told you- its not turning on. Justyna this USB dvice in Windows is showing up (unknown device...)
Hey. I read all the informations on the sugested topic. I got all images for flashing. I think there od an issue with USB conection. My watch showes up after conecting to USB. Therefore the information od "unrecognized" and "not working corectly". I tried to update drivers, and it refuses to do that - the driver is already uptodate.
Im runing windows on mode that allows instalation of unsigned drivers....
Sugestions?
kantor_d said:
Hey. I read all the informations on the sugested topic. I got all images for flashing. I think there od an issue with USB conection. My watch showes up after conecting to USB. Therefore the information od "unrecognized" and "not working corectly". I tried to update drivers, and it refuses to do that - the driver is already uptodate.
Im runing windows on mode that allows instalation of unsigned drivers....
Sugestions?
Click to expand...
Click to collapse
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.
silver-alx said:
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.[/
Thanks for advice. When I try to install the manuały (left clock on inf->install I get error: this inc file iż not supportu g this methods od instalation;/
Click to expand...
Click to collapse
kantor_d said:
silver-alx said:
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.[/
Thanks for advice. When I try to install the manuały (left clock on inf->install I get error: this inc file iż not supportu g this methods od instalation;/
Click to expand...
Click to collapse
No left click. You have to choose update driver in the device manager and then manually select your driver.
Click to expand...
Click to collapse
silver-alx said:
kantor_d said:
No left click. You have to choose update driver in the device manager and then manually select your driver.
Click to expand...
Click to collapse
Thank You for help. I cant install any drivers to it. The device seems broken. As stated before: the device apears as unknown/broken. Cant install any driver for it...
Click to expand...
Click to collapse
Fix?
Did you fix it? And how?
kantor_d said:
silver-alx said:
Thank You for help. I cant install any drivers to it. The device seems broken. As stated before: the device apears as unknown/broken. Cant install any driver for it...
Click to expand...
Click to collapse
I am with the same problem, only that my nor as unknown device it appears, simply connect in the pc and it does not change anything, it was after a flash that it erased and it did not return more
Click to expand...
Click to collapse
As I had had the same problem, I'll share my mysterious experiences. After I used pace for 1 month it become dead but while keep pushing power button, the white flash appear and then off. I changed the wall adaptor and then the watch revived.
For several days ago the watch gone dead and no white flash on when pushed power on 2 secs. anymore. I tried to change adaptor but nothing happen. I tried to clean the contact of both watch and ring, but it still dead.
Finally I switched the power cord from samsung mobile wire to Blackberry cord, it resurrected.
So I suggest you all to try changing the charging system may solve this problem.

Categories

Resources