Related
I love using my hd to watch movies hooked up to aux input in my car,
I got one of these of ebay:
http://cgi.ebay.co.uk/NEW-CAR-CHARG....c0.m14&_trkparms=65:1|66:2|39:1|293:1|294:50
its already snapped!
I want something that allows you switch between horizontal/vertical and tilt funtion for tomtom and core player
I may try velcro stickers or maybe an air vent holder
any other ideas?
I have had 2 of these..they are absolutely rubbish, the insertion clip snapped both times. I have also tried another holder (universal one) and that turned out to rubbish too, I threw it away. Another time the suction disc came away from the arm. I have also tried my own custom made holder - I took a leather phone case and screwed it into the back of the arm attachment, that worked much better than the worthless gadgets of ebay. So save your money and forget buying from ebay, it maybe worth spending a bit more for a better quality item. And just yesterday I found my my xda orbit holder provided by O2 so using that for now which fits the Touch HD very well.
My side I buy that for my car Car Windshield Swivel Mount Dock for HTC Touch HD. At 5.60$ nobody can make better!
Work like a charm!
KaNiMziE
I had a universal jobby off ebay, that was a bit rubbish since where it clamped onto the phone it obscured the volume control buttons.
Ordered one of the HD specific designed ones and will see how that goes.
KaNiMziE said:
My side I buy that for my car Car Windshield Swivel Mount Dock for HTC Touch HD. At 5.60$ nobody can make better!
Work like a charm!
KaNiMziE
Click to expand...
Click to collapse
I've had two of these and on each occasion the clip broke, it's useless!
If anyone is still searching
I've got a magnetarm for my HD combined with a metalpad. Works fine and you can rotate your pda in any order.
http://www.amazon.de/MAGNET-HALTERUNG-T-Mobile-Compact-Autohalterung/dp/B000RXZUPA
I will mounting this one Car Portable Device/Gadget Holder and Windshield Mount
and after then when I use it, I tell you
laguna33p said:
I've had two of these and on each occasion the clip broke, it's useless!
Click to expand...
Click to collapse
I have it for 3 weeks now and no trouble at all, very fast delivery and safe, only 2 weeks at my door....
KaNiMziE
http://forum.xda-developers.com/showthread.php?t=533649
Brodit holder + charger
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Pro Clip makes some amazing solutions. I have used them for years on numerous devices.
Balthazar81 said:
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Click to expand...
Click to collapse
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
DontHate said:
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
Click to expand...
Click to collapse
Goes pretty fast. Haven't done any comparison, but I can't complain. I normally drive 45 minutes to work and twice a day charging is fine for me.
Balthazar81 said:
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Click to expand...
Click to collapse
got one as well it pricey but well worth it
mrobo said:
I will mounting this one Car Portable Device/Gadget Holder and Windshield Mount
and after then when I use it, I tell you
Click to expand...
Click to collapse
I like the look of the solid mount to the screen, but the holder looks a bit busy.
How have you found it?
Paul.
I got my own here www.mobilefun.co.uk
In this page you can find just about everything you need for your touch hd or any other phone... Bad thing deliveries are done only within the EU countries
The link for the holder i personally purchased and i'm 100% satisfied is here:
http://www.mobilefun.co.uk/htc-touch-hd-car-holder-p19992.htm
If you are looking for something a lot cheaper that goes with a car charger in the pack you can look here:
http://www.mobilefun.co.uk/drivesafe-car-pack-for-the-htc-touch-hd-p20932.htm (only difference with the first one is a little more stiff on adjusting method) but its still perfect and safe & both are really easy to adjust horizontally and vertically the phone & they are both built for windshields which means you can video type your driving
I suggest it without second thoughts!
DontHate said:
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
Click to expand...
Click to collapse
Got the same one. Pricey but oh so worth it. I love it,and would def recommend it. I've tried the suction ones, and they for some reason keep falling off the windscreen, even with cleaning the surface/drying it etc.
The brodit just clips into your dash, and fit your touch hd perfect. They make mounts for every car.
I love it!!!
And it charges at a normal rate, just like a standard wall charger.
I have this one and it's excellent..
Brodit holder question
I have a cheap universal effort I bought from some motorway services - Im looking for a better solution - im using airvent attachment - its a three pronged affair which clips over one of the vent "stays". Its wobbly as hell - which is fine most of the time, except when you are attaching the charging cable. Does the Brodit attach to the airvents ? if so does it attach solidly ? in a better way than my three pronged clip ??
Depending on your car and which mount you want.
For my Xantia, using the vent beside the steering wheel the mounting plate fits in around the vent, between the vent unit and the dashboard body, rather than the cheapo ones that clip feebly to the vent.
At the moment I'm using two of the suction cup ones that people have had problems with.
Superglue is your friend (no, do not superglue it to the windscreen no matter how temping that sounds!).
The internal flange which holds the silicon cup to the base of the arm breaks up causing it to regularly fall off teh windscreen, some good superglue carefully dripped in fixes this. The other problem I've had is the ends breaking where the metal snake fits in, again superglue (pull back the concertina cover) in each end sorts this.
Ok these are things that should not go wong in a good product, but when they're available for a couple of quid shipped from China, it's to be expected, and thankfully easily rectified.
Has anyone got the details of a UK supplier of Brodit?
Has anyone found or/and is using a decent car mount?
I'm looking for one that is powered (with micro USB) with maybe a fm transmitter and bluetooth.
Thanks.
Halfords phone holder
Incar charger from T-Mobile
if anyone is using a charger for their car, i'm wondering how fast it is to charge a battery with it?
is it like when charging through your PC (slow) or just like it's standard charging?
Check brodit.com, they have/will have soon, a good holder/charger for the phone
/MKL
I make use of a Parrot MKi9100 Solution via BT.
Charging happens by a cut + angled Micro-USB Cable that is soldered to the +12V ignition Bus (with some resistors, a fuse and so on), which comes out of the front window air ventilation from my dashboard.
The Phone itself is also used as GPS Navigation System and rests in a holder, like you know it from 3rd Party PNAs (I don't know the English Word for such a holder atm.. sorry.)
I've just purchased the Brodit Fixed install Active Cradle and the car specific ProClip mounting bracket from http://www.dsldevelopments.com/
for $96 AUD inc P&H
I figured this would be a good future proof solution as if I upgrade my phone then I just need to get the right cradle and it will fit straight to the ProClip.
When it arrives I'll take photos of the install.
Yeah, I'm looking for a good landscape car mount for my X10 (has to be adjustable as I have a thin rubber case on the phone), as well as car charger and hands-free speakersphone for Christmas.
saltorio said:
Yeah, I'm looking for a good landscape car mount for my X10 (has to be adjustable as I have a thin rubber case on the phone), as well as car charger and hands-free speakersphone for Christmas.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=8020010#post8020010
also Canadian Tire has a charger from duracell that looks like it will fit the bill for many different phones multi ends and all.
I couldnt find any proper hands free car kits for the Xperia. I'm happy to use a Blueant X9i got 3x $100 off ebay.co.hk!
I got one of these:
http://universalfuze.com/parrot_minikit.html
I think it is great!!!
I only use brodit, for the last 5 phones...
Got my Brodit kit yesterday, installed it in 10 minutes.
Forgot to take photos but can easily do it again.
The mounting face clips onto my dash near the stereo quite securely then the swivel mount just screws to that. I drilled some small pilot holes in the mounting face to make it easier and neater to screw the swivel mount into place, then just attach the phone mount to that. Plug into cigarette lighter, done.
In the not to distant future I'm going to install a secondary cigarette light socket hidden behind the dash. Its pretty easy to just hook into the existing cigarette lighter wiring, this will give the car kit the look of a permanently installed device, but actually make it pretty easy to remove. And free up the cigarette lighter for other chargers (iphone, usb adaptor for Blueant charger, etc)
So, I ended up picking up a iGrip Traveler Kit at The Source for $30. The suction cup holds pretty well on my Magellan GPS mounting plate (though has fallen off once or twice after the car gets well warmed up from the winter cold... I rigged a string to my windshield vent to prevent it from falling), and the actual holder grips the X10 superbly, even in the rubber shell case I have. You can very easily pivot it and rotate it from portrait to landscape.
For the charger, I'm using the one that came with my Jabra Cruiser.
skydirt said:
Has anyone found or/and is using a decent car mount?
Click to expand...
Click to collapse
I was using this cup holder mount that has a short gooseneck (Bracketron Universal Cup-iT with Grip-iT), and that was working fine for me. However, the position of the phone wasn't the best since I had to look down and toward my side to view it.
I just got this mount that goes into the CD slot of my car stereo, and this one is pretty nice. It's the Mountek MT5000. The mount blades slide right into the front of the CD slot, and then you just twist this little nut in the back a bit to tighten the blade grip. My X10 fits nice and snug, and now it's in a better viewing position.
If I need power, I just use one of those inexpensive USB chargers from eBay. A ten-minute job of opening one of those up, soldering together the data pins, and it works good for the phone.
saltorio said:
So, I ended up picking up a iGrip Traveler Kit at The Source for $30. The suction cup holds pretty well on my Magellan GPS mounting plate (though has fallen off once or twice after the car gets well warmed up from the winter cold... I rigged a string to my windshield vent to prevent it from falling), and the actual holder grips the X10 superbly, even in the rubber shell case I have. You can very easily pivot it and rotate it from portrait to landscape.
For the charger, I'm using the one that came with my Jabra Cruiser.
Click to expand...
Click to collapse
xdadevelopers1222 said:
I was using this cup holder mount that has a short gooseneck (Bracketron Universal Cup-iT with Grip-iT), and that was working fine for me. However, the position of the phone wasn't the best since I had to look down and toward my side to view it.
I just got this mount that goes into the CD slot of my car stereo, and this one is pretty nice. It's the Mountek MT5000. The mount blades slide right into the front of the CD slot, and then you just twist this little nut in the back a bit to tighten the blade grip. My X10 fits nice and snug, and now it's in a better viewing position.
If I need power, I just use one of those inexpensive USB chargers from eBay. A ten-minute job of opening one of those up, soldering together the data pins, and it works good for the phone.
Click to expand...
Click to collapse
Sorry but all these ideas sound pretty crap. I totally agree with vmiguel and will only buy Brodit from now on.
i have been using the ebay x10 windshield mount. for $12 it's doing a pretty good job compared to the other ebay mounts for my other phones. i'm not a fan of universal window mount kits..
not a big fan of universal kits either.
i attached (sorry, couldn't find one without a watermark, but i won't link to their ebay auction) a picture of a kit that's sold on ebay, does anyone have experience with this one? the one pictures is meant to attach to an air vent but there's also one with a suction cup. it looks like it has a good fit with the x10.
I'm going to need something like your kits.
Need more options, please!
caifanX10 said:
Need more options, please!
Click to expand...
Click to collapse
I've been through a bunch of car mounting solutions already. They include:
Cup mount: www.bracketron.com/products/universal-cup-it-with-grip-it
Cigarette power mount: www.bracketron.com/products/universal-usb-power-dock
Air vent: www.bracketron.com/products/mobile-grip-it-universal-holder
CD slot: www.mountek.com
My favorite is the Mountek CD slot mount. Its quite inventive.
The air vent one from Bracketron is good too. Its spring clips hold everything nice and firmly.
The cup mount was good too, but it doesn't offer a good viewing angle and reach for the phone.
totalundone said:
not a big fan of universal kits either.
i attached (sorry, couldn't find one without a watermark, but i won't link to their ebay auction) a picture of a kit that's sold on ebay, does anyone have experience with this one? the one pictures is meant to attach to an air vent but there's also one with a suction cup. it looks like it has a good fit with the x10.
Click to expand...
Click to collapse
I use this one, and love it. The drawback is you have to remove any case before putting it in the mount. I got the hang of one handed removal, but it was a bit difficult at first. Easy to rotate to landscape. Camera hole in back for using any apps that layer gps info over real time camera view. Vent mount won't work with circular/spherical type vents in some cars. You'll know what I mean if you have one of those cars.
Sent from my X10a using XDA App
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Same
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
I've been looking for the same thing, swivel capabilities is a must. Anyone find a good one?
Get a decent quality universal car mount (with the four prongs) and then just buy a cheap fixation for your Lumia. That way you can keep the mount when you eventually change phones... That's what I've been doing for the last few years...
I've got a telescopic Herbert Richter car mount which looks like it's the same as this one (http://www.ebay.com/itm/iGrip-Herbe...472900?pt=PDA_Accessories&hash=item48454f5744) and I've been very pleased with it. Unlike some of the cheaper ones I've had it has never lost suction and come unstuck. Most eBay sellers who have cheap Lumia 920 car mounts will sell the phone-specific part of their mounts separately for a couple of euros...
Well .. i dont like the universal ones to be honest because the ones i used never where as usfull as expected. will have a loook at the richter one.
Which car charger can you recommend. I am reading a few amazon.co.uk reviews and they are not to pleased with the ones offered
The one I use (and the one that looks like mine that I posted a link for) isn't one of those universal ones that can be adjusted to hold any size of phone... I don't like those ones either... The ones Im talking about just use a four prong system where you can attach phone specific "faceplates" like you can see here http://forum.xda-developers.com/showthread.php?t=683631 so it looks like it's made for the phone you use it with... Sorry, it's not easy to explain but you should be able to get an idea of what I'm talking about.
does your one come with a car charger already?
got different from belkin etc .. just looking for the power part of a car mount now.
will see if i find a universal holder later
hrmm, not sure if we are allowed to post links on here...
anyways, i bought this one http://www.amazon.co.uk/gp/product/B00AEO3U7W/ref=oh_details_o00_s00_i00
took a gamble as there was no reviews, current review is from myself.
Its pretty solid, I tend to always buy ones for the phone as I'm not a big fan of the all in one mounts, and the nokia one i got for my partners 710 is terrible, won't even hold my phone just slips out constantly. I've got a car charger from maplin to go with it that does do a 1000ma charge as my old charger didn't charge the phone enough to keep up with navigon.
Its as solid as some premium brand mounts i've bought in the past, as good as you can get with one suction cup. (imo) how long it lasts is another thing, but for the price I thought it was pretty neat, a friend borrowed it and immediatly ordered one too.
Its very sturdy and the easist phone mount i've used to slip in and out, only thing that did initially put me off is the fit isn't 100% secure, theres very slight movement, i don't think its even 1mm, thought it would rattle but seems fine in the car.
well i just ordered this for my charging:
http://www.amazon.co.uk/gp/product/B002C3AFHG/ref=oh_details_o00_s00_i00
hope you didnt have this one
and i will have a closer look at the amazon offer, thanks
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
NeoGreendawg said:
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
Click to expand...
Click to collapse
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
stead said:
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
Click to expand...
Click to collapse
I've very rarely seen them advertised on their own but if you ask, most eBay sellers who sell the dirt cheap car holders will sell you the phone specific attachment on it's own in my experience and usually for only a couple of euros including postage. Postage must be cheaper in Hong Kong than it is in France... :laugh:
Arkon Slim-Grip Floor Mount SM525-S
FWIW I have been using this model for about 4 years- first with my Tilt2 and now with the Lumia 920 (both without a case and with an Otterbox Defender case as the holder can expand). I had an older version for the Tilt2 which didn't allow for 180deg movement (you couldn't move the phone to landscape position while inside the holder) so when I got the 920 I was able to purchase just the Slim-Grip portion and keep the flexible pedestal part that I already had.
The 4 legs on the Slim-Grip are not permanent- they come in a little bag and you slide them into the body of the phone holder. The move left and right to allow for access to ports on the phone that may not be centered on the phone itself. It also comes with extra legs that are a different shape in case you need a different fitment for your phone (think they are shorter?). The bottom of the Slim-Grip is the part that moves- you push it down with the bottom of your phone and it expands enough to let you then push the top of the phone into the holder so the top legs support it. It isn't obvious from the pictures on Arkon's site at first but you will see a line running across the holder when you look at the pictures and that is where the movement occurs.
I am able to put my phone in the holder with one hand and, because the pedestal part is mounted to one of the passenger seat floor bolts, it's very stable. It's hard to move the pedestal to bend it to different shapes, which is a good thing, because it won't flop all over the place when driving. I can use the 920 without a case in it and with an Otterbox Defender, either way is fine. It allows easy access to the audio and power ports. My friends stick their phones in it too and it holds them just as well (iPhones, Galaxy S3's, Blackberry's etc......).The mount does not impede passenger comfort, however they may not be able to just flop their left leg against the center console because the mount would then be rubbing against the plastic and may leave marks, at least in my Subaru Legacy.
I have used this mount without any problems for close to 5 years now and everyone is jealous of it because it is so secure and convenient. I have no problems recommending it 100%. Good luck.
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Dave-Kay said:
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Click to expand...
Click to collapse
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
BigKuri said:
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
Click to expand...
Click to collapse
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Griffinx said:
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Click to expand...
Click to collapse
They swivel 360 degrees and are very high quality. I've got one in my car that I've also used for my Note II (different holder of course though). It was well worth it IMO.
brodit always had the best ones..
but i read something with "screws" and that made me buy something different for the glas
What did you hear, I'm curious.
Sent from my 920
oh i just found car mounts to be screwed in the cockpit
-adrian- said:
oh i just found car mounts to be screwed in the cockpit
Click to expand...
Click to collapse
Oh OK I understand what you're saying now; I thought you were referring to an issue like the screws scratching the phone or something like that.
I didn't have to screw anything into my dash. I had a mount that clips onto the dash and a holder which is screwed into said mount. Very easy.
It looks like my next phone is going to be a Note 3. Does anyone have any experience with a windshield mount that will work with their case? The case will need to have a holster with belt clip. My current windshield mount is from slipgrip, but most of the cases they offer a mount for on the Note 3 don't seem to have the holster option.
I drive on some pretty rough roads so I need something that will stay stuck to the window and not let the phone bounce out. I use my phone as a GPS, so the windshield mount is kind of important.
See if my car holder plus wireless charger suits your needs.
https://www.youtube.com/watch?v=ZTNAPp2UkkI
It is very very sturdy. Suction on windscreen is awesome. Even after releasing button the suction is awesome abs have to really pull to get it off. Have four other holders and they don't even come close. Screen had frozen a few times due to cold and it stays on when usually my others would have fallen off.
I use it for sat navigation and Google music streaming usually and works great.
The holder had a depression where I insert the wireless charger. You could easily accommodate a belt clip in it.
Looks interesting. The only down side I see if it looks to take 2 hands to place or remove the phone. I don't always wear a bluetooth headset, so one handed removal and installation is kind of important.
bubblesmoney said:
See if my car holder plus wireless charger suits your needs...
.
Click to expand...
Click to collapse
I have been looking for this in the states, but cannot find it anywhere. They are getting ridiculous on ebay.
Did LG stop making them?
Might you know the official LG part number for the car dock?
hoyter said:
I have been looking for this in the states, but cannot find it anywhere. They are getting ridiculous on ebay.
Did LG stop making them?
Might you know the official LG part number for the car dock?
Click to expand...
Click to collapse
i dont know the LG part number. The one i got is made by some one else for the LG WCP300 qi charger, i use the koolpuck qi charger in it as its a lot cheaper. The car holder is called SMART FIT2 cradle (TCD-C800P) and says designed by NEIM for LG Mobile
Not sure if its made by LG or NEIM as in the front it has a hologram sticker on the box saying FOR LG MOBILE. it was less than 25$ when i bought it, and i sent my video link to seller as was happy with product and he withdrew listing and later found all sellers had increased prices from 200$ to 600$ which is crazy. Very few sellers and hence probably demand has gone up. But the product is great and i want to buy another one too but not at these crazy prices! Hopefully soon the prices will come down once other sellers start selling the same seeing demand.
The suction is awesome and i dont think suction can get any better. One handed shouldnt be an issue as you put it in the holder when you sit in car before you drive and later only remove it when you get off. quick release button is efficient. I use the speakers on the phone as i dont like bluetooth headphones or ear pieces. The volume is loud enough for me to use google music and google navigation and phone calls come via the car speakers as mine is an older car where the music doesnt come through the car stereo and only phone calls come through car stero bluetooth connection.
I have the first and second version of the Exogear Exomount. While they have amazing suction to almost any semi flat surface AND work with cases , they do take 2 hands to put your phone in. I also have a TechMatte car mount which has a button in the middle of the back. When that button is pressed, when you put your phone in it, the mount closes down on the device. It has foam padding on each side, so it will not scratch your phone. The only issue you might have with it would be using big cases. My Spigen Bounce and Diztronic TPU fit in the mount snug, but I'm afraid that a bigger case might not fit.
Here's a link to it :
http://www.amazon.com/TechMatte-Easy-Touch-Universal-Windshield-Packaging/dp/B00G3KN9LI
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
I use this from Techmatte. Works great for me
I had an iOttie one touch for my previous phones. The suction cup mount works *very* well. Better than anything I've seen before.
http://www.amazon.com/iOttie-Windsh...UTF8&qid=1385573943&sr=8-1&keywords=iottie+xl
To lock the phone you just place the phone in the dock and push it in. It pushes a button in the center and pulls the sides in, locking the phone in securely.
To remove, you hit two buttons on the side which releases the tension.
One handed in, one handed out.
Oh, and it's very sturdy. Doesn't bounce around like other cheaper mounts.
I ended up going with the slipgrip again. It works well for the Spigen case I ordered, so all is well.
I just had a chat with ProClip USA, they said that they will be making a custom holder for the N6.
Tal; We will be designing a holder for the Nexus 6. This design process generally takes between 4 and 6 weeks once the design team obtains the device, but can take longer depending on the device. Once we have a custom holder available for your device we will send you an email with a link to the products.
Tal: If you want to provide your email we can add you to the email notification list. Once the holder is available you will be notified via email.
Click to expand...
Click to collapse
:good:
I have had proclip holders for my , N4, N5, & HTC M8.
They are pretty good if you haven't heard of them before.
-J
Does the charging cable stay in place so you can just slide phone in without having to actually plug the phone In your self?
frigidazzi said:
Does the charging cable stay in place so you can just slide phone in without having to actually plug the phone In your self?
Click to expand...
Click to collapse
They have several different versions but yes, you can get one that the phone just docks into and charges. No need to unplug the phone, just pull it out of the charger.
Jsunn said:
They have several different versions but yes, you can get one that the phone just docks into and charges. No need to unplug the phone, just pull it out of the charger.
Click to expand...
Click to collapse
Thank you. I will have to look into this if I decide to go case less. QI in car is just too slow for me.
I don't like the ones with the built-in charger. I like to have the option to unplug. Every phone I've ever owned has given off crazy feedback noise when the power cable and headphone cable are both plugged in but no audio playing.
Any news on this? I bought for my moto x 2nd gen. By the time i received, i had my nexus 6 lol
A general email from Proclip I received a few days ago announced plans to make a Nexus 6 holder. They offered email notifications when it's ready for release.
bmwh0r3 said:
Any news on this? I bought for my moto x 2nd gen. By the time i received, i had my nexus 6 lol
Click to expand...
Click to collapse
I bought a universal ProClip just for this, when switching phones, no need to keep buying new cradles
I also have a universal clip and it works wonderfully with my N6.
I also have a universal that fits both my wife's M8 and my N6 with case. Probably won't buy a custom again but will continue to buy custom mounts
can any of you link to the specific universal that fits the nexus 6. want to make sure I make the right purchase, thanks
warrenis1234 said:
can any of you link to the specific universal that fits the nexus 6. want to make sure I make the right purchase, thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-6/accessories/proclip-universal-car-mount-t2948846
I'm a big ProClip fan but have never used an adjustable holder before.
I've been looking at the T1 adjustable holder. It's very clear how it adjusts for differing phone widths. What I can't seem to figure out is how it adjusts to differing phone depths. From what I can tell it doesn't. So if you've got a phone with no case, or a thin case, wouldn't it rattle a bit back and forth. How do you make it fit snugly?
demarcmj said:
I'm a big ProClip fan but have never used an adjustable holder before.
I've been looking at the T1 adjustable holder. It's very clear how it adjusts for differing phone widths. What I can't seem to figure out is how it adjusts to differing phone depths. From what I can tell it doesn't. So if you've got a phone with no case, or a thin case, wouldn't it rattle a bit back and forth. How do you make it fit snugly?
Click to expand...
Click to collapse
If it is a snug fit on the width, it should hold the phone from rocking back and forth, so the depth wouldnt matter too much. I'm not saying squeeze the width of the cradle into a death grip, but a snug fit should hold the phone okay.
demarcmj said:
I'm a big ProClip fan but have never used an adjustable holder before.
I've been looking at the T1 adjustable holder. It's very clear how it adjusts for differing phone widths. What I can't seem to figure out is how it adjusts to differing phone depths. From what I can tell it doesn't. So if you've got a phone with no case, or a thin case, wouldn't it rattle a bit back and forth. How do you make it fit snugly?
Click to expand...
Click to collapse
The width is fixed based on the rails. They give the width of the rails. What they don't say, and is annoying to me, is the phone doesn't have to fit fully between the rails. Most cases aren't completely flat edged, so just part of the sides need to fit within the rails. If the phone and case are narrower the the rails I usually adjust to the phone, take the phone out and adjust the sides in another hair. There is a little flex I the sides, and there is nothing wrong with a little tension as you slide the phone in.
If anyone else has any ProClip questions, feel free to fire away. I'm a reseller for them since I designed holsters for them back in the old palm/win ce days. Can also save you some money over buying direct, we'll except when they have the rare 25% off Sale. That usually kills it for us resellers.
dbpaddler said:
The width is fixed based on the rails. They give the width of the rails. What they don't say, and is annoying to me, is the phone doesn't have to fit fully between the rails. Most cases aren't completely flat edged, so just part of the sides need to fit within the rails. If the phone and case are narrower the the rails I usually adjust to the phone, take the phone out and adjust the sides in another hair. There is a little flex I the sides, and there is nothing wrong with a little tension as you slide the phone in.
If anyone else has any ProClip questions, feel free to fire away. I'm a reseller for them since I designed holsters for them back in the old palm/win ce days. Can also save you some money over buying direct, we'll except when they have the rare 25% off Sale. That usually kills it for us resellers.
Click to expand...
Click to collapse
I can attest to dbpaddler's knowledge of ProClip and his status as a great reseller. I've bought many ProClip custom car mounts and phone holders from him over the years.
Yeah, the T1 holder depth is larger than the phone so if you grab the phone you can sort of tilt it forward or backward. It fits in there snug enough that it isn't flopping around while you drive.
I still want one designed for a naked N6.
dbpaddler said:
The width is fixed based on the rails. They give the width of the rails. What they don't say, and is annoying to me, is the phone doesn't have to fit fully between the rails. Most cases aren't completely flat edged, so just part of the sides need to fit within the rails. If the phone and case are narrower the the rails I usually adjust to the phone, take the phone out and adjust the sides in another hair. There is a little flex I the sides, and there is nothing wrong with a little tension as you slide the phone in.
If anyone else has any ProClip questions, feel free to fire away. I'm a reseller for them since I designed holsters for them back in the old palm/win ce days. Can also save you some money over buying direct, we'll except when they have the rare 25% off Sale. That usually kills it for us resellers.
Click to expand...
Click to collapse
what I don't understand fully is the installation part in the car. videos I've seen were of the person screwing it into place around the vent. how does the universal model fit from car to car?
warrenis1234 said:
what I don't understand fully is the installation part in the car. videos I've seen were of the person screwing it into place around the vent. how does the universal model fit from car to car?
Click to expand...
Click to collapse
They have car specific mounts, Then Mounts for the phones. its kind of a two piece system. I am also waiting for the N6 mount so i can order one and a mount for my Chrysler 300s.
Jsunn said:
I just had a chat with ProClip USA, they said that they will be making a custom holder for the N6.
:good:
I have had proclip holders for my , N4, N5, & HTC M8.
They are pretty good if you haven't heard of them before.
-J
Click to expand...
Click to collapse
They'll have custom holders for every phone, always. It's just time. If you're using a case on the phone then just get an adjustable, and it will most likely be the last cradle you ever buy. I've had the same 875214 cradle since my Samsung Moment. And it has fit every phone since: Samsung Epic, Galaxy S2-4, Note 2, Note 4, Evo 4g LTE and my Avant. The design has change from adjusting in the four corners to the two in the center which started with their smaller adjutable for the iphone with skins and the BB Pearl.
The reason they're able to make cradles and mounts for just about everything with wheels and everything with a battery is because they machine everything. No high cost molds required. Machining has higher costs overall and doesn't really decrease with volume, hence their stuff comes at a premium (which I try to help with when I can). That's why when I was trying to get holsters designed back in the day, all the usual suspects just laughed at me, including Seidio. No volume, not worth our time. People on a grand scale don't want to put their big smartphones in a belt clip holster. ProClip took a look, started sending me prototypes to test, and for a few years had an exclusive in holsters. Then Seidio realized they were missing the boat, and they hopped on as did the other injection molders, and ProClip's business there dried up since they can't make $5 holsters. Their parent company is Brodit out of Sweden. Everything is designed and manufactured there. I sent a few phones and mp3 players to them for testing over the years. They even made a holder for my Rio Karma (dating myself).
Once in a while they'll have a big sale like they did for Christmas at 25% off. That's a rarity. Legally I can say I can offer you a 10% discount. That's the max they allow resellers to advertise. Key word being advertise. I sell through ebay at 10% off and just pray people email me first so I can save them a little more. Not a lot unfortunately, but it can only be so much otherwise it's not worth my time.
That said, there's no better combined mount and cradle system out there. The only problem is they rely on cracks and crevices in the dash to place the mount. Makes inserting and removal easy, great for leasing. But it also limits locations and sometimes dashes are designed as such that the only placement partially covers a vent or is a console mount that sits really low. Companies such as bracketron and pro-fit make the metal dash mounts that attach to the radio mount screw with pretty good placement usually, but it requires removal of the center dash panel. Not all want to tackle that. You start breaking clips, and it's a bear. Though some stereo installers will do it for a nominal fee. They can also tap in to the fuse box and run a 12v socket behind the dash if you want to clean up the wiring a bit and don't want to do it yourself. Companies like Kuda work similarly for mounting buy they have a leather covered box of sorts that clips in with metal bending clips and you screw in the cradle wherever you want. Pro-fit (I think) also makes adhesive type mounts that can be convenient for locations where others can't go, but don't live in Arizona and such as the heat will take its toll on the adhesive sooner than you'd like. The adhesive doesn't mar the dash though upon removal which is nice. Or you can go with the cheap vent mounts, the bean bag sit on the dash or better yet, the cd slot mount. I like my car too much to do that.
Sorry for the run on. I used to be more active promoting and helping when new phones were out, but it does get time consuming, and the real job is a little more important, so I've dropped off a bit.
---------- Post added at 06:39 PM ---------- Previous post was at 06:30 PM ----------
warrenis1234 said:
what I don't understand fully is the installation part in the car. videos I've seen were of the person screwing it into place around the vent. how does the universal model fit from car to car?
Click to expand...
Click to collapse
2-piece system. The cradle for your phone and the dash mount for your car. The dash mounts are vehicle specific and make use of cracks, seams and crevice they can fit in a slender barbed piece that kind of locks in. Some dashes are more flexible for placement than other. If someone is using it around the vents it usually means that's the only place they had an accessible area to place the dash mount. If you go to this link you can use the drop downs to find your vehicle and see what the mounting options are. It's not universal where you can just go from car to car with the cradle. Well, unless you go with their suction cup mount which works on the windshield. But, if you do have multiple vehicles you can buy one dash mount for each car and a move kit. female piece on each dash mount and the male piece on the back of the cradle. Then you can move the cradle from car to car.
The only thing getting screwed in is the cradle to the dash mount as most people just have one primary vehicle. If you're seeing something universal, it's the adjustable cradle. They do have console mounts that are adjustable and can fit in multiple vehicles, but they are more made for one car installation and just adjust to fit.