Related
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
What error are you getting?
Have you tried using Recover instead of Refurbish?
anseio said:
What error are you getting?
Have you tried using Recover instead of Refurbish?
Click to expand...
Click to collapse
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
eccomania said:
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
Click to expand...
Click to collapse
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
anseio said:
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
Click to expand...
Click to collapse
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
I'm just having problems installing Nokia Care Suite. It gets so far and I get a 1220 error.
Any ideas?
Sent from my iPad using Tapatalk HD
It's some odd registry error, right? I think you just click through it. You'll have to navigate to the program folder to open the launcher. IIRC, that's what I had to do.
eccomania said:
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Click to expand...
Click to collapse
so, how did you solve this problem? Ive got exactly same trouble wasting my time for days...
Do You ha e a screenlock code on the device. I had to remove my Outlook account, which requires a screenlock code, remove the code and then I was good to go.
Sent from my Lumia 800 using Board Express
anseio said:
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
Click to expand...
Click to collapse
This. In order for the Programming menu to be available, you need to select "Open Product" from the File menu and choose the correct product code (RM-819, RM-801, etc.).
My problem is I can never get passed the "Checking Mode" or "Starting" stage. I keep pressing the volume up button + insert USB cable until I feel a short vibration. After that, Windows will recognise my device as DLOAD and after a short while, the device restarts. Nokia Case Suite will then prompt me to unplug the USB cable, shutdown the device and do the volume up + insert USB cable routine again. Rinse and repeat. What did I do wrong? I am using Windows 7 64-bit.
EDIT: I solved my problems by going to the C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers\ directory and manually installing all the x64 drivers.
Im also having a few problems with NCS... i just figured I would piggy back off this thread rather than start a whole new one....
When installing I get a error that says.... "ERROR 1904.Module C:\Program Files (x86)\CommonFiles\nokia\Service Layer \C\Service Modules\ServiceModule_00003\msml4.dll failed to register" I hit ignore but now when i connect my phone to my PC... it isnt being recognized as DLOAD or QC or anything. I am at a loss... i went through and installed the drivers that were in the Nokia folder manually, except one it wouldnt install for some reason. Any help would be greatly appreciated.
I am having the same problem on my lumia 920. I didn't find a solution yet. This thread is the only thing I found so far.
Edit: I tried ncs on x64 w7 and x86 w8
Not starting
my phone is not sarting after installing nopkia evolve
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
I had same stupid problem. You have to change your o.s.country and region from control panel. Try UK or USA. Both will work..
Hope this will help.
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
Hi i was new to all this and installed dynamics v2.0 fully unlocked rom the other day and this is how i went about it
download this
RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U
http://www8.zippyshare.com/v/48117282/file.html
this is a load your phone back to 1.24
to install it i did this
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial but maybe it will need to install some drivers cant remember 100%
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that then you will have your phone back to 1.24
next you can follow this post here and download the attachment at the bottom named DFT_XSPL_WP7FG1.rar this what u need for this step
http://forum.xda-developers.com/showthread.php?t=1195647
basically this is the install procedure u may need to install active sync (XP) or windows mobile device center (vista and 7) but i did not have to my phone automatically did this
DFT_RSPL_WP7FG1_LAUNCH allows you to load RSPL on the device:
1. Extract ALL files from RAR archive.
2. Run DFT_RSPL_WP7FG1_LAUNCH (with administrative rights to access USB)
3. Mindfully reads information text. Press “Next” button.
4. Reset your device and hold “Volume Down” button during reset to enter OSPL mode.
5. Connect your device to PC via USB cable.
6. Now you may need to install proper USB drivers. They come with Active Sync / Windows Mobile Device Center.
7. Install drivers if required.
8. Make sure device show “USB” at the bottom instead of “Serial”.
9. Press “Next” button in the wizard. It should detect your phone.
10. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
11. After successful connection it should show device codename and allows to choose installed OSPL version.
12. You should look at the screen and select OSPL version in drop down list box. You need do this because it’s not possible to detect installed version via USB.
If your current SPL version doesn't present in the list, you can choose nearest version,
BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
13. Press “Next”. Wait until comes final page.
14. Read and close window
15. Look at the device – it must reboot to RSPL.
16. If you see RSPLX.Y.Z and “CotullaRSPL” on the screen – the task done! Otherwise, please report in this thread about your problems.
17. Put some feedback in this thread for community and developers.
Installing HSPL
DFT_HSPL_WP7FG1_INSTALL allows you to install HSPL on the device:
1. Launch RSPL on the device like described above.
2. Be sure that you close RSPL wizard window.
3. Run DFT_HSPL_WP7FG1_INSTALL.exe (with administrative rights to access USB)
4. Mindfully reads information text. Press “Next” button.
5. Proper drivers already must be installed in RSPL step.
6. Press “Next” button in the wizard. It should detect your phone.
7. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
8. After successful connection it should show device codename and allows to choose HSPL or OSPL version to install. OSPL means you install stock SPL back.
9. Check device codename, if something wrong turn off computer and run to the nearest forest. Grab some water with yourself.
10. Press “Next”. Wait until comes final page.
11. Device will reboot and start to boot OS.
12. Reset it and enter SPL mode again. Be sure there HSPLX.Y.Z and “CotullaHSPL” appear.
13. Put some feedback in this thread for community and developers.
Now u are ready
you can find what custom rom you want i used dynamics v2.0 which can be found here and its fully unlocked aswell so all i all im pleased with it
http://forum.xda-developers.com/showthread.php?t=1520352
download it and install the same way we installed the 1.24 rom in the begining of this post
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that and then you will have loaded your desired custom rom onto your phone
I hope this helps some of u out and happy modding
best regards
steve
1.24
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
geofferz said:
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
Click to expand...
Click to collapse
1.24 im refering to the SPL you can find your version by turning the phone off holding volume down and power button and u will see your SPL at the top,
im not sure about the unlocked sim/network im new to all this aswell maybe do a search on the forums and see if you can find the answer, but i dont know this 1 sorry :/
rom is good no issues had a cable issue yesterday that wouldnt let me charge my phone but thats down to my dodgy cable
you dont have to install this rom you can use any custom rom you like or might find out there
anyways hope this helps
Launch RSPL
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
geofferz said:
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
Click to expand...
Click to collapse
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Oh also do not extract the 1.24 from the .rar file run everything from there
This is why ur getting that error I think
geofferz said:
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
Click to expand...
Click to collapse
you dont need to select a option just load ROMUpdateUtility.exe
ive just downlaoded and reinstalled the rom myself to try see what u mean and i dont get this option
when you go to bootloader screen on your phone and it says usb open the rom file and click ROMUpdateUtility.exe
now dont open active sync or mobile tools as it says on the program information
just click the tick boxes and continue through the process
maybe try download the rom again found this
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
but like i sed i have downloaded the file myself and it is working for me without any problems
beany2009 said:
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Click to expand...
Click to collapse
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
geofferz said:
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
Click to expand...
Click to collapse
lol np mate ill try help as best i can
right i understand your bit now about the dynamics rom u need to select regular on this part
custom i think would be if u want to edit it or some **** but i have no idea so u use regular mate because this is the actual rom file made but remember u must downgrade and load rspl and hspl onto your phone before doing this step
right my firmware is 2250.21.51301.401 but i dont know if this changes on installation of the downgrade and adding the custom rom like i sed im a complete noob with this myself but all went smoothly for me thats why i made the tutorial
and no mate my phone took about 5-10 mins to install the 1.24 orange rom
have u tried a hard reset first and then see if it helps with the installation
ill search around for your firmware and see if there has been issues
edit..........................................
did a search on the forums and your firmware comes up with nothing :/ did a google and only shows this thread did you type the numbers correctly?
also you mean that the rom update works sometimes and not others?
if it works once it should install it mate np's
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
beany2009 said:
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
Click to expand...
Click to collapse
again thanks for your help
ok here goes red: PD 67100 ss-BC (4k)
SPL-4.6.2250.0(129193) mng
what you think?
i think my SPL was on that before so i dont know why u are having issues mate :/
maybe wait and see if a developer can read this and give us some info on why its not working for you :/
Thanx For The Help And the Tutorial It Was very Helpfull
Now my phone Is running dynamic 2.0
hey can u tell me what other custom roms are available that i can install on my phone and if there are any different methods of installing them
no problem mate glad it helped
erm the only other custom rom i have seen on mozart is deepdishing v7.0 you can find this in the development thread inside mozart topics
and for me mate im not sure and have not seen another way of installing another custom rom but im new to all this myself
anyway glad this helpped
regards
my computer wont pick up htc 7 mozart in bootloader
can anyone help me its doing my head in .
when you connect your phone to pc in bootloader its not showing as usb on the bottom of bootloader screen?
just serial?
just to confirm. this wont work on Asian handsets.
beany2009 said:
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
steve
Click to expand...
Click to collapse
Thx for the easy to follow guide.
It worked on a telstra brand mozart using windows 8.
Sent from my GT-N7105 using Tapatalk 2
Hey guys,
I was reading allot of info on the web about windows phone and the amber update and stuff.. but never a solid release date.
so the amber update is going to be released in this august, and this info is coming from some guy in spain via twitter..
so we are not sure when this update is going to be released. (ok it hasj been released)
but i have recently installed the amber update like so many others, and the update is really good, adding allot of new features that anyone with a lumia should be able to enjoy.
since windowsmania.pl doesnt offer the roms anymore (and i dont speak polish) and the amber roms aren't available through Nokia Care Suite, it could be quite difficult to obtain the roms and the necessary files & info to install this update on your phone.
i put together a few steps that will help you install amber. (especially when you never did this before!)
also this is mostly for the europian users with a Lumia 920.
please note that i will not be responsible of your own action on flashing a phone!
like only start flashing with a full battery!!
and make backups before you start! your phone will be wiped clean!
(go to settings for backup options, wp8 can make all the backups you want!)
Downloading the right files & setting this up:
step 1.: download Nokia Care Suite --> also known as NCS --> get it from here: http://www.mediafire.com/?aww6lix9f0vuukd or http://d-h.st/IvF
after download install NCS.
(UPDATE: you can also update NCS itself by clicking updates in the NCS main menu.
by doing this it will also automatically install every necessary driver. so step 2 isnt really needed.. but you still need to do step 3 because it will give you acces to the update itself!!)
step 2.: download the drivers here: http://d-h.st/Mc3
install the files and reboot the pc after installing!
(includes 64bits drivers and 32bits drivers, if you don't know which one you should use, you can better stop reading from here )
step 3.: go to: C:\Program Files\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0 and find the usergroupsconfiguration.cfg file.
replace it with this file: http://www.mediafire.com/?r0up8y7tyku1k11 or http://d-h.st/GFW
thanks for the config file go to Jragar
(it will give you acces to Care Suite External)
Step 4.: download the rom here:
part 1: http://d-h.st/JgP
part 2: http://d-h.st/2JG
part 3: http://d-h.st/h17
(its the RM821_3047.0000.1326.2002_RETAIL_eu_euro1_425_02_240539 with product code 059R4H6) thanks for the rom goes to: blakepender
Note: i used the rom on my Dutch Lumia 920 with code: 059R016. it still works like a charm and i still have product code 059R016. so i dont think it will change your product code. (but im not sure!)
drop all files from the .rar into: C:\ProgramData\Nokia\Packages\Products\rm-821.
if you dont have this folder yet. create it and then put all the files in there.
Identify the phone:
Step 5.: plug in your phone, while the phone is on, so your pc can detect it. After the phone has been found by your pc, start NCS.
double click on the "Product Support Tool for Store 5.0", it will promp you for username and password, just press sign in.
If all went well, NCS already found your phone and it will give some info about it. like that it will be running in normal mode.
Step 6.: In the Product Support Tool (PST) click on "File" --> "Open Product". A new window will appear. go to "RM-821" click open.
Step 7.: Now click on "programming" (Bottom left in PST) --> "recovery". After this click on "update list" the rom file should appear.
if not check if you put everything into the right folder. (step 4).
Start Flashing:
Step 8.: Click the start button once! it will give an error. This is good! (its because it has an different product code, but it will be fine)
please note that it can take a few minutes before PST gives a "recovery - failed" notification. please be patient. press ok after you get it.
Step 9.: Now unplug your phone, and power it off. Hit the Start button once again. PST will give an error that it can't find your phone.
It will show you the option how to start your Lumia 920 in flash mode.
Step 10.: Start your phone by pressing the power button + volume down button simultaneous. when the phone starts the vibrate. plug the phone back in to the pc, and press the "Retry" Button.
Give it a minute and it will start flashing your phone.
You know its going ok if you start seeing the nokia logo with a progress bar on the phone.
Please while the phone is flashing, dont touch anything.. if it gets disconnected somehow your phone can get bricked..
When the flashing is done it will reboot and it will start wp8 with amber.
Please keep in mind that it will take allot longer to boot the first time because it has to configure allot of things.
Your phone will start and ask you what language you want, just follow these steps, after this you will have the amber update up and running!
After a few hours to possibly 2 days (tnx Mikemikeson) with wifi it will give a notice that you will have like 10 or more updates pending. do this updates to get all amber features!
like sms + call blocking.
Hope these steps will help some folks that just cant wait to get Amber and didnt knew where to get the right files.
Good Luck!
p.s. this was done on a windows 7 pc and was confirmed working on windows 8.
Thank you
I flashed my unbranded Lumia 920 product code 059R075, with this one. I can confirm that this is perfectly done. No problems so long as you follow the instructions.
Cheers for the links and the instructions OP.
Update: Persian/Farsi Keyboard and Speech are missing in this build. I am not sure about all other languages though.
works
works like a charm.
after failed amber update with an other guide, this works.
Nokia 920, Black, T-Mobile Operator previous Vodafon branded
Would this work on a US ATT lumia 920?
Sent from my Nexus 7 using Tapatalk 4
hawkeye29 said:
Would this work on a US ATT lumia 920?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I honoustly don't know if it will work.
you can try i though. when you have PST running with your phone connected, you can look for the latest rom file available for your phone.
under "tools" click on "firmware download" type in your product code, which can be found under the basic info tab. it should show the latest available firmware for your phone.
it will be non-amber, but atleast you have something to turn back to if it doesnt work in the end..
so download this rom first before you start flashing and you should be able to try it out without any consequence.
otherwise check this: http://forum.xda-developers.com/showthread.php?p=44504258
its about putting amber on AT&T Lumia 920.
so good luck!
Yep the European amber rom works great on my lumia 920 att
Sent from my RM-821_eu_euro1_425 using Board Express
Just to confirm that this works perfectly on Windows 8 PRO x64. Thanks for the info
Fix missing languages
Instead of adding keyboard, simply change the system language and you will automatically get the desired keyboard. Your languages persist should you revert back to English or any other system locale.
I get this error when trying to download the 3 ROM files from the OP.
File Belongs to Non-Validated Account.
The resource you are trying access belongs to an account that has not yet been validated
Still have questions, or think we've made a mistake? Please contact support for further assistance.
munkyjim said:
I get this error when trying to download the 3 ROM files from the OP.
File Belongs to Non-Validated Account.
The resource you are trying access belongs to an account that has not yet been validated
Still have questions, or think we've made a mistake? Please contact support for further assistance.
Click to expand...
Click to collapse
Oops sorry guys.. forgot to verify my mediafire account.
it should work now.
tnx for mentioning!
Just as a side note.
Took a day and a half till I got the 10 updates presented - even with wireless link.
Could you provide a mirror please? Free Users are allowed to download each file 10 times a week only. So if 10 free users download this file no free user is able to download one of these files thanks in advance
The file you attempted to download is an archive that is part of a set of archives. Free accounts are limited to 10 downloads per week of each file of this type. The limit for this file has been reached. Since Free accounts are limited to uploading files 200 MB or less, large files frequently must be split into multi-part archives. Our premium accounts can upload files up to 10 GB in size and can download an unlimited number of archives. Account rates start at $5.00 per month.
Click to expand...
Click to collapse
GtaSpider said:
Could you provide a mirror please? Free Users are allowed to download each file 10 times a week only. So if 10 free users download this file no free user is able to download one of these files thanks in advance
Click to expand...
Click to collapse
Thank you for this info, i did not know. im transfering the files as we speak.
it should be available within the hour.
Sorry for the inconvience
Flashed this last night and it is working beautifully, I have noticed since installing this WhatsApp, Skype and Lync are pushing messages through much more efficiently and I have found my battery still has 40% charge after being used all day, usually by this time I would be at about 15%.
For other people that flash, check out this page here for all of the QR codes for the Nokia system apps.
Use the Bing Vision on each of these QR codes to force the updates down.
Thanks for providing the ROM and Instructions, much appreciated.
Deptcharge said:
Thank you for this info, i did not know. im transfering the files as we speak.
it should be available within the hour.
Sorry for the inconvience
Click to expand...
Click to collapse
Thanks a lot mate Amber works like a charm!
if anyone can give me a hand, Click start > get initial error. Power off, hit start, get prompt to but it into flash mode, power on with down arrow and power button, hit retry get error
0xFA001304: Platform ID check fails. Reason(s): The FFU file is not meant for this product. The platform ID of image does not match with platform ID of the device.
on my ATT 820, I know it's a different device, just wondering for those few who got it working on the ATT variant, if there was something else I needed to do .
************ Edit ************
Well, I guess I never flashed it to portico, and I don't see a copy anywhere so I guess I'm waiting on the official 820 variant. But thanks
i have an unlocked 920 (i think it is RM-820)... will this flashing method work for mine as well?
pathum1 said:
i have an unlocked 920 (i think it is RM-820)... will this flashing method work for mine as well?
Click to expand...
Click to collapse
you can check with NCS to make sure if its really a rm-820. just look for basic info in PST.
also it should work but it will change it to rm-821. and im not sure what that will do for your provider. Probably nothing.
maybe if you check the lumia 920 dev section on this site, i know there is a topic about changing from rm-820 to rm-821.
im on a holiday in greece on a tablet so i cant search for link now. good luck and i hope you wil have amber soon!
Deptcharge said:
you can check with NCS to make sure if its really a rm-820. just look for basic info in PST.
also it should work but it will change it to rm-821. and im not sure what that will do for your provider. Probably nothing.
maybe if you check the lumia 920 dev section on this site, i know there is a topic about changing from rm-820 to rm-821.
im on a holiday in greece on a tablet so i cant search for link now. good luck and i hope you wil have amber soon!
Click to expand...
Click to collapse
i flashed it nevertheless! Mine was RM-820... changed to RM-821... took a day for the update to appear.... works perfectly... i do notice a slight decrease in battery life.... plus my heating issue (top corner heating when using any app) has NOT been resolved
however great guide man. the flashing worked!
OK, I got an old (used, second handed) RM-801, it's running WP7.8 (8858).
I wanted to flash it back to Tango (8773).
So I downloaded the firmware with data package manager, Started the product support tool, and followed these steps: open product->RM-801->programming->recovery->hold vol+ button and plug USB cable then click retry
But then NCS wont flash the device (it shows the retry dialog again) and my PC pops up a dialog says I have to format the disk before I can use it; and there is such a "Qualcomm CDMA Technologies MSM" mass storage device in my computer.
I'm using NCS 5.2.
What should I do now?
Thanks.
k_basara said:
OK, I got an old (used, second handed) RM-801, it's running WP7.8 (8858).
I wanted to flash it back to Tango (8773).
So I downloaded the firmware with data package manager, Started the product support tool, and followed these steps: open product->RM-801->programming->recovery->hold vol+ button and plug USB cable then click retry
But then NCS wont flash the device (it shows the retry dialog again) and my PC pops up a dialog says I have to format the disk before I can use it; and there is such a "Qualcomm CDMA Technologies MSM" mass storage device in my computer.
I'm using NCS 5.2.
What should I do now?
Thanks.
Click to expand...
Click to collapse
Okay, you need Qualcomm CMDA to flash, check my tutorial : http://forum.xda-developers.com/showthread.php?t=2681591
If that don´t work try Nokia care suite
Good luck
Dev.YoungBoy said:
Okay, you need Qualcomm CMDA to flash, check my tutorial : http://forum.xda-developers.com/showthread.php?t=2681591
If that don´t work try Nokia care suite
Good luck
Click to expand...
Click to collapse
Thank you for the tutorial!
However seems the NssPro doesn't support flashing the stock firmware? It can only open *.nb files, and I can't find a custom Tango rom (or any WP7.5 based rom).
What should I do now?
================================================
DONE!
I followed the (part of the) instruction of #4 in this thread and my Lumia 800 is now running good old WP7.5!
Thank you! And @kingcartwright!
Dev.YoungBoy said:
Okay, you need Qualcomm CMDA to flash, check my tutorial : http://forum.xda-developers.com/showthread.php?t=2681591
If that don´t work try Nokia care suite
Good luck
Click to expand...
Click to collapse
It's work with Lumia 510?:cyclops:
Side question: Is Lumia 920 section officially dead?
So now i'm on WP8.1 looking forward to update to 10, whatever it is. Insider preview, technical, whatever, I just need to. But all fast ring, slow ring, all are not working. Everytime I select one, it force me to reboot in 10s, then REPEAT for eternity. No update in update setting.
I don't know if the lumia 920 section is dead or not. But I do know that Microsoft has ceased support for the lumia 920 concerning windows 10 update. SO you cant update it anymore via insider etc etc. --> But still the last preview version was really buggy so consider yourself lucky.
If you really want to try/update to windows 10 then look at the XDA lumia 920 main page (see button somewhere above this site. Are we allowed to post links in this forum???).
I've used these steps to update my lumia 920 to windows 10 and it really works. However you need to know that Windows 10 on the lumia 920 isn't perfect.
minimog34 said:
I don't know if the lumia 920 section is dead or not. But I do know that Microsoft has ceased support for the lumia 920 concerning windows 10 update. SO you cant update it anymore via insider etc etc. --> But still the last preview version was really buggy so consider yourself lucky.
If you really want to try/update to windows 10 then look at the XDA lumia 920 main page (see button somewhere above this site. Are we allowed to post links in this forum???).
I've used these steps to update my lumia 920 to windows 10 and it really works. However you need to know that Windows 10 on the lumia 920 isn't perfect.
Click to expand...
Click to collapse
Appreciate your input. I tried. That tutorial was to sideload app and tweak and stuff. But i'm still on 8.1 and unable to do so IDK why. Everytime I sideload that app I get run time error. Please check capabilities etc.
Right now I am trying to revert back further to oldest 8.1 (before small patch OTA) to see if I can re-try that trick again.
I got a new phone. And giving this one to my sister. Facebook doesnt work very well (news feed skipping problem) so I try to upgrade to WP10 to get a new FB app for her.
Edit: Wait, I take that back. I checked general wp section. Not L920. So I need to check it again to make sure. Thanks.
hoursenghong said:
Appreciate your input. I tried. That tutorial was to sideload app and tweak and stuff. But i'm still on 8.1 and unable to do so IDK why. Everytime I sideload that app I get run time error. Please check capabilities etc.
Right now I am trying to revert back further to oldest 8.1 (before small patch OTA) to see if I can re-try that trick again.
I got a new phone. And giving this one to my sister. Facebook doesnt work very well (news feed skipping problem) so I try to upgrade to WP10 to get a new FB app for her.
Edit: Wait, I take that back. I checked general wp section. Not L920. So I need to check it again to make sure. Thanks.
Click to expand...
Click to collapse
---------------------
Well I don't really know what you meant with side loading. When you look at the lumia section onder development you'll see a link with the Title:
[ROM][DHT v0.1]Windows 10 v10586 ROM for Nokia Lumia 920 (RM-821) posted by ngame within this board I've also done some tests and I've given some info.
I essence you're going to put a windows 10 OS from a different device onto a lumia 920 I thin k it came from the 950. So putting a custom rom on the 920.
minimog34 said:
---------------------
Well I don't really know what you meant with side loading. When you look at the lumia section onder development you'll see a link with the Title:
[ROM][DHT v0.1]Windows 10 v10586 ROM for Nokia Lumia 920 (RM-821) posted by ngame within this board I've also done some tests and I've given some info.
I essence you're going to put a windows 10 OS from a different device onto a lumia 920 I thin k it came from the 950. So putting a custom rom on the 920.
Click to expand...
Click to collapse
Yeah, I just saw that. Couldn't find a clear tutorial on how to do this. Now i'm on stock 8.1. Do you have a link for complete tutorial that includes link to every necessary components in English?
I could do that, however I first have to know 1 thing. are you using RM820 or RM 821 or etc? BEcause the faq is based on a RM821.
minimog34 said:
I could do that, however I first have to know 1 thing. are you using RM820 or RM 821 or etc? BEcause the faq is based on a RM821.
Click to expand...
Click to collapse
RM821. Would fit perfectly
Oke well, if you want I can make a Faq based on my experience resulting in a working lumia 920 with an official windows 10 os.
However please note that If something were to fail or if the device were to brick (wich you can just unbrick see the lumia 920 board) I will not be responsible for any of it.
minimog34 said:
Oke well, if you want I can make a Faq based on my experience resulting in a working lumia 920 with an official windows 10 os.
However please note that If something were to fail or if the device were to brick (wich you can just unbrick see the lumia 920 board) I will not be responsible for any of it.
Click to expand...
Click to collapse
Don't worry mate. I messed around with mobile software since Symbian-day. I've been off for only 2-3 years.
Oke well I'm at work right now so I'll type something tonight (fyi. I live in the Netherlands).
minimog34 said:
Oke well I'm at work right now so I'll type something tonight (fyi. I live in the Netherlands).
Click to expand...
Click to collapse
Anytime, mate.
First you need to download the following files:
- Hex_loader
- SBL3_Engineering
- WindowsDeviceRecoveryToolInstaller
-------> - http://nokiaviews.com/unlock-windows-phone-bootloader-and-enable-mass-storage.html
- EFIESP & Custom Rom File
-------> - https://www.mediafire.com/folder/nd6yd9pzbld7v/DHT_L920
- Malaysian FFU file RM821 you need this one because, apparently,
the Malaysian firmware uses a different storage partitioning, which is necessary for windows 10.
Yes it is possible to reformat the drive with windowsitnernals, however most people on the board and from experience can tell you that it won't work.
When you flash the ISO it will say that the ISO is too BIG.
-------> - http://www.lumiafirmware.com/guid/059R024
- WPinternals 1.2
-------> - http://www.wpinternals.net/index.php/126-wpinternals-1-2-released
Now First organize:
Extract the zip/rar files to a folder and make it clear so that you can find it again:
I don't know if certain steps are or aren't necessary but I'll include them since
I've done them in order to make it work.
It is recommended to HARD reset first before doing this.
First: you need to install WindowsDeviceRecoveryToolInstaller,
1 to recover the phone and
2 it will install the right driveres on your pc. Atleast I was told to do this (you just have to install it that's it).
Second: Start WPInternals:
1 you need to bootload your device using the following files, HEX, ENGINEER etc the first 3 files above.
2 you need to change your current device firmware to the Malaysian ROM. --->PLATFORM--> FLASH--> Flash ORIGINAL FFU.
3 it will take some time and it will need a reboot
4 After that go to load iso and use the files--> WPInternals go to the -> Platform -> Flash -> Flash Separate partition and select the MainOS partition.
Third: when it is done:
1 Your device MAY show the following glitches:
-Stops at nokia screen,
-stops at windows screen,
-stops at the boot screen,
-it will boot to the start screen but you wont see any tiles,
-it will boot to the start but you can't use the touchscreen,
-it will boot to the start with touchscreen but you wont be able to swipe beyond the start screen.
2 To solve this you need to do a hard reset so if possible turn off your device.
Then coneect your device to a charger while holding down. When you see a exclamation point ! you need to let go and press the following up-down-power-down. It will then do a hard reset.
If you are unable to turn the device off then do the following--> perform a soft reset bij holding power and down. When it restarts quickly connect the charger and hold down. If you're to slow it will boot up and you need to do it again. But you'll have enough time to do this.
After restart it should work.
Good luck.
INFO: I used the following links:
http://forum.xda-developers.com/lumia-920/development/rom-windows-10-v10586-rom-nokia-lumia-t3425936
http://nokiaviews.com/unlock-windows-phone-bootloader-and-enable-mass-storage.html
I would like to add that after everything you can just update the phone without problems. It will detect an update automaticaly
Will keep you posted. Thanks for the tutorial.
minimog34 said:
I would like to add that after everything you can just update the phone without problems. It will detect an update automaticaly
Click to expand...
Click to collapse
IDK why people love mediafire so much. I don't remember the last time that I managed to download big file through that website. And DepositFiles.
No matter at what internet speed i have. No matter how fast I can download from other websites. I just can't get more than 30kbps from that 2 websites. I just can't.
Edit: Worse thing is ffu file download can't be resumed. Everytime my stupid internet disconnect for 3s for absolute no reason, the download restarts.
Well sorry but that's where I've downloaded the files. Maybe click download and just wait...
minimog34 said:
Well sorry but that's where I've downloaded the files. Maybe click download and just wait...
Click to expand...
Click to collapse
BRAH...
Hard reset was up-down-power-down.
You have the opposite. My phone was stuck for 2hours, BRAH. 2 hours.
So sorry for that it was late and I was tired.
But did you get it to work?
minimog34 said:
So sorry for that it was late and I was tired.
But did you get it to work?
Click to expand...
Click to collapse
Can confirm everything is fine. Thanks so much, mate. This is very very helpful.
Happy to hear that everything is working. Really sorry messing up the hard reset combination.