1hi there i just bought a HTC BUTTERFLY from Ebay Taiwan but i just started using it and the problems i am facing are WiFi was able to connect when i opened the package but when i inserted the sim card i am not being able to connect to wifi as it start searching and never find out the wifi even the one i connected and used before inserting the sim.
it is displaying the name of the WiFi which i used earlier but that's not in range any more and i tried on almost 5 diffferent routes and none of them worked.then i did the factory reset and it started working without the sim but as soon as i put the simcard again i have the same problem
2 when i listen to music with headphone on and turn the volume to full phone restart and if i play again and increase the volume to max the phone re boot again but if i play the music with 40% decreasing the volume its dose not reboot but as i s increase the volume to max it reboots and since i bought this i am having this issue and really annoying me..i feel like breaking the phone plz help plz the
BUILD NUMBER 1.09.707.4
HTC SDK API LEVEL 4.64
HTC SENSE 4+
ANDROID VERSION 4.1.1
KERNEL VERSION [email protected]#1
PLZ Help MEEE
Plz help me i am really desperate
rr1434 said:
1hi there i just bought a HTC BUTTERFLY from Ebay Taiwan but i just started using it and the problems i am facing are WiFi was able to connect when i opened the package but when i inserted the sim card i am not being able to connect to wifi as it start searching and never find out the wifi even the one i connected and used before inserting the sim.
it is displaying the name of the WiFi which i used earlier but that's not in range any more and i tried on almost 5 diffferent routes and none of them worked.then i did the factory reset and it started working without the sim but as soon as i put the simcard again i have the same problem
2 when i listen to music with headphone on and turn the volume to full phone restart and if i play again and increase the volume to max the phone re boot again but if i play the music with 40% decreasing the volume its dose not reboot but as i s increase the volume to max it reboots and since i bought this i am having this issue and really annoying me..i feel like breaking the phone plz help plz the
BUILD NUMBER 1.09.707.4
HTC SDK API LEVEL 4.64
HTC SENSE 4+
ANDROID VERSION 4.1.1
KERNEL VERSION [email protected]#1
Click to expand...
Click to collapse
rr1434 said:
Plz help me i am really desperate
Click to expand...
Click to collapse
Hi,
Are u able to solve this issue? coz am facing the same problem as well n no solution so far
xircoms said:
Hi,
Are u able to solve this issue? coz am facing the same problem as well n no solution so far [/QUOT
Have you resolved this issue as I am also facing the same.........., please reply
Click to expand...
Click to collapse
Got a similar problem to yours, have you been able to solve it? My WIFI was working perfectly fine at work today. Starting last night it took a while for it to connect at home and tonight it is not working at all. It sees the netwrok, its obtaining the address, authenticating and the rest of it....and thats it. Once or twice it said that the network is too weak, which is just impossible. Before today never had a problem with WIFI at home. WIFI works perfectly fine on the rest of my devices at home. Please help, if anybody was able to solve the problem!
WiFi Signal of HTC Butterfly suddenly went wrong? What happen?
Yuliya_b said:
Got a similar problem to yours, have you been able to solve it? My WIFI was working perfectly fine at work today. Starting last night it took a while for it to connect at home and tonight it is not working at all. It sees the netwrok, its obtaining the address, authenticating and the rest of it....and thats it. Once or twice it said that the network is too weak, which is just impossible. Before today never had a problem with WIFI at home. WIFI works perfectly fine on the rest of my devices at home. Please help, if anybody was able to solve the problem!
Click to expand...
Click to collapse
Anyone can help with this problem?
my HTC Butterfly which i bought last year was working fine until last night. Now the WiFi signal strength is having difficulties to reach full bar, i mean full signal...most of the time it receives poor signal. The problem become worst if i try to use whatsapp or skype. The connections suddenlly disappeared. A few minutes back it connected again.
I read from this website. they have suggested a few things - like resetting my wifi router (which i think it is not the problem. the router working fine, as my friend is using my wifi using his iphone), then i try to restart...i have restarted - my phone, my wifi router...but still, the signal was very disappointing.
Then, at last, i decided to reset the phone..which at first, i really try to avoid as a lot files i need to back-up, the problem is, i could not back-up to my dropbox account as this one require good connection as well. So i jumped straight resetting my butterfly, my beloved htc butterfly.
Then, i noticed, it has improved a lil bit...(i mean the WiFi signal/connectivity), but still, if i try to download big size of applications or using skype, the connectivity disappeared. Anyway better than the previous (before resetting).
Now the signal still did not reach full bar (like it used to before).
What can i do next? should i reset again?which i dont think might resolve the issues.
What happen actually? I dont recall that my phone did fall down or anything. I dont browse any porn (they used to say, porn site contains a lot of bug/virus/malware etc, they sayy..)
FYI, this is the detail of my phone, i just list down everything perhaps somebody out there can help me.
Android Version is 4.3,
HTC Sense version is 5.5,
Software no 3.15.707.4,
HTC SDK API Level 5.65
Kernel Version is 3.4.10-g4a55757 [email protected] #1 SMP PREEMPT
Baseband version 3A.32.306.04_10.21.1060.16D
Build No 3.15.707.4 CL293608 release-keys
Browser version Webkit/534.30
Really appreciate your kind advice...i mean "real" advice..
Regards
rr1434 said:
1hi there i just bought a HTC BUTTERFLY from Ebay Taiwan but i just started using it and the problems i am facing are WiFi was able to connect when i opened the package but when i inserted the sim card i am not being able to connect to wifi as it start searching and never find out the wifi even the one i connected and used before inserting the sim.
it is displaying the name of the WiFi which i used earlier but that's not in range any more and i tried on almost 5 diffferent routes and none of them worked.then i did the factory reset and it started working without the sim but as soon as i put the simcard again i have the same problem
2 when i listen to music with headphone on and turn the volume to full phone restart and if i play again and increase the volume to max the phone re boot again but if i play the music with 40% decreasing the volume its dose not reboot but as i s increase the volume to max it reboots and since i bought this i am having this issue and really annoying me..i feel like breaking the phone plz help plz the
BUILD NUMBER 1.09.707.4
HTC SDK API LEVEL 4.64
HTC SENSE 4+
ANDROID VERSION 4.1.1
KERNEL VERSION [email protected]#1
Click to expand...
Click to collapse
It sounds like you bought someone else's problems. The files you need to fix your issues are not available in this forum. Nothing here is for the variant of the DNA that you have.
This may change in the future
Related
First, let me say that searching XDA-DEV with google is not an easy task.
Anyhow, I'm having this issue of phone calls being dropped after 2 to 5 minutes of talking. Signal is strong, bluetooth or no bluetooth. Uninstalled apps that recently got installed and the problem still persist. Is there a system log of phone calls, etc that can help me troubleshoot this issue ?
I have X7501 running original stuff.
Thanks
marek101 said:
First, let me say that searching XDA-DEV with google is not an easy task.
Anyhow, I'm having this issue of phone calls being dropped after 2 to 5 minutes of talking. Signal is strong, bluetooth or no bluetooth. Uninstalled apps that recently got installed and the problem still persist. Is there a system log of phone calls, etc that can help me troubleshoot this issue ?
I have X7501 running original stuff.
Thanks
Click to expand...
Click to collapse
I would say it was almost certainly the fault of your network, a simple trick to test would be to go into the phone properties then into band and lock the band onto the old 2G signal instead of the fancy new 3G type and see what happens
PS do you really have an FM radio on your phone, does it use the Headphones as an aerial or does it just work !! is there any chance you can upload a screen shot of the radio app !
thanks in advance !
Bought the Atrix last week and unlocked it with the help from the webshop as I'm in Belgium, no problem connecting to Mobistar wich is my provider and data connections works great. But I'm having real problems making phonecalls and recieving calls; the phone reboots or the dialer hangs and it looks like a call is going on when it's not, phone still works but flashing green in the notification area and it's impossible to hang up, need to reboot. This happens like 80% of the times I try to make a call. After a reboot it works fine to call and hang-up one or two times then it crashes again.
Also noted that my Dialer often runs twice in the Running Apps manager - is that normal??
Anyone having the same issues or know what to do, reinstall the Dialer app --> if so how? Is it a hardware or software problem??
A little more info: when I recieved the device it was in a sealed Atrix box but the phone was used and already had an active Blur account so I had to do a hard reset to be able to use it... --> was it returned 'cause of faulty dialer or radio... then resold to me... not nice if so...?
Tried to install dialer one app but it seems only to skin the original dialer...
It's a greate device and works great othervice but in the end it's still a phone... which should be able to make calls...
Help
Ive got an unlocked Atrix too and now in Germany, I have the same problem. Motorola should definitely look into this.
Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working.
Thanks Nazrin (for both replies) !!
It sure did the trick, though no data access is not acceptable on a phone like this!!!
So this meens that all unlocked Atrix's in european GSM networks have the same problems? Haven't seen any others reporting this and there are quite a few in use I've noted in other forums.
Was thinking of trying to have mine replaced (which probably won't be easy and take long time...) but that won't change anything then??
We have to wait for the european version of Atrix rom I suppose??
Any others with the same problem??
No problems buddy, glad it worked..and i have to agree with you..this bug is unacceptable...it seems the phone just ***** up everytime it calls on utms (3g)...im sure there is more people with this problem...
Sent from my Supercharged MOTO ATX
I have the same problem
Hi guys, I have the same exact issue (I'm also in Belgium, on Mobistar). I'm somewhat glad to hear this is a generic issue, and not an issue with my specific phone. At least I can be fairly certain replacing it won't solve this issue then.
I made another post here before I came across this one, has a bit more info: we are seeing modem panics when using 3G + outbound call. I've also contacted Motorola support to no avail:
http://forum.xda-developers.com/showthread.php?t=1028771
You can also read there that I tried another operator, and it did not crash with that one (although 3G did disconnect).
Hopefully Motorola/Qualcomm will start to notice the bug when they release the phone globally, and release a fix.
Either that, or we all have phones from the same bad batch
This bug is really bad for users in europe....cant call on utms...
I really hope motorola takes this seriously cos if there's no fix via software updates then its moto gone for me
Guys, you are all on unlocked att atrix right? I do believe it is a simmiliar software glitch/bug/lock that you have porblems using it on non att networks as the problem with the wifi that it stops working for some of us (check the thread about it for more info). As all suggests there it is a config file problem, unfortunately i or anyone else doesnt know yet which one....
Yeah maybe..but funny thing is wifi is working without a glitch...will have to read that forum later...
Workaround options
So, since it seems we're not gonna get this fixed until there is a new radio/modem firmware available for flashing (and even then..), I've been looking for a workaround.
Found two potential applications that could do what we need: disable data completely when making an outgoing call, or switch to 2G:
- Sanity
- Superpower
I've tested the first (Sanity), and it does not work (fully). It does seem to disable data, but the bands aren't switched so our problem remains. I've contacted the developer here: http://tagliamonte.net/forum/thread-10.html. He seems to be very responsive, so given enough interest, I think he would add the functionality we require.
The second app I only came across today, and have not tried yet. It does not have a function to specifically switch bands when making an outgoing call, but it has a trigger for "Foreground application", so if we make that the dialer/contacts... Question remains if it will be able to do the switch.
Hopefully one of these will lead to a decent workaround for all of us!
Well done unknown...i will try these apps... but the real fix should be from moto...im always reading the net for anything that can solve this issue
reboots on incoming and outgoing calls
Same in Russia on Megafon network, I had to enter 4636 menu and use it as "GSM only". Even this does not fully solve problems, e.g. call forwarding does not show the new destination number while it does actually make the phone divert calls correctly.
My hope is that UK release will trigger new software version which will address this issue. ANYONE has news on this?
FIXED!
YAY! I just fixed this issue
What you need to do: flash the radio from this thread:
http://forum.xda-developers.com/showthread.php?t=1052914
You have to use RSD-lite, since sbf_flash will not work. Flash the 1.87 baseband and enjoy working HSPA (including unlocked upload speeds ^^)
Now I can finally appreciate this phone fully
Enjoy guys!
_unknown said:
YAY! I just fixed this issue
What you need to do: flash the radio from this thread:
http://forum.xda-developers.com/showthread.php?t=1052914
You have to use RSD-lite, since sbf_flash will not work. Flash the 1.87 baseband and enjoy working HSPA (including unlocked upload speeds ^^)
Now I can finally appreciate this phone fully
Enjoy guys!
Click to expand...
Click to collapse
Worked for me as well..brilliant!!!! its working here in germany.....but I wonder the telstra radio will work in my home country with frequencies of 900/2100
Motorola Atrix restart when placing a call
I just got the same exact Dialer problem now, but the flash radio file is gone* in the pointed post, and I don't know exactly how to flash the radio.
Someone can help me? I need the radio file and step by step instruction to how to flash it.
BTW my Atrix 4G works perfect for a year till this Dialer problem started past week.
I also use my phone as a full Linux computer when docked, and it works very fine.
Thanks
* The file was on megaupload, that was closed
No answer
Why I never got an answer of any post I did?
There is something wrong?
Eli
elijacob said:
I just got the same exact Dialer problem now, but the flash radio file is gone* in the pointed post, and I don't know exactly how to flash the radio.
Someone can help me? I need the radio file and step by step instruction to how to flash it.
BTW my Atrix 4G works perfect for a year till this Dialer problem started past week.
I also use my phone as a full Linux computer when docked, and it works very fine.
Thanks
* The file was on megaupload, that was closed
Click to expand...
Click to collapse
Forget about those ways
klingsurf said:
Bought the Atrix last week and unlocked it with the help from the webshop as I'm in Belgium, no problem connecting to Mobistar wich is my provider and data connections works great. But I'm having real problems making phonecalls and recieving calls; the phone reboots or the dialer hangs and it looks like a call is going on when it's not, phone still works but flashing green in the notification area and it's impossible to hang up, need to reboot. This happens like 80% of the times I try to make a call. After a reboot it works fine to call and hang-up one or two times then it crashes again.
Also noted that my Dialer often runs twice in the Running Apps manager - is that normal??
Anyone having the same issues or know what to do, reinstall the Dialer app --> if so how? Is it a hardware or software problem??
A little more info: when I recieved the device it was in a sealed Atrix box but the phone was used and already had an active Blur account so I had to do a hard reset to be able to use it... --> was it returned 'cause of faulty dialer or radio... then resold to me... not nice if so...?
Tried to install dialer one app but it seems only to skin the original dialer...
It's a greate device and works great othervice but in the end it's still a phone... which should be able to make calls...
Help
Click to expand...
Click to collapse
[Sorry for problem in speaking]
i had that problem too , im using CM13 with Marshmallow Version of android
So . the easy way is :
***** search "Default" in settings. then choose " System dialer" as Default ! just it ****
but if there is no search bar in your setting . try this patch:
Android 6 : Setting/Apps then click the setting icon on top(may be diffrent in your case) , then Click on "default ...." then choose " System dialer" as Default! :fingers-crossed:
but in some cases that it didnt work . they have to reinstall gapps .
Or in official Roms , reset will be usefull
any quastions?
4.4.2 ROM bluetooth does not work well!
Phone connected to the bluetooth headset is not working well. Sometimes the connection is lost!
4.3 ROM is not such a problem.
Does anyone have a similar problem?
Can anyone help?
Jackal107 said:
4.4.2 ROM bluetooth does not work well!
Phone connected to the bluetooth headset is not working well. Sometimes the connection is lost!
4.3 ROM is not such a problem.
Does anyone have a similar problem?
Can anyone help?
Click to expand...
Click to collapse
i had a similar problem but with my car's bluetooth. i cleared up my contact listed and the problem was resolved.
here is where i found the solution: http://forum.xda-developers.com/showthread.php?t=2646592&page=2
hope you come right.
Please help, after 4.4.2 with my note 2, bluetooth headset connection quality got crappy. I cant walk away from my phone more than 1 meter. Anyone experiencing this problem????
...
onurcandan said:
Please help, after 4.4.2 with my note 2, bluetooth headset connection quality got crappy. I cant walk away from my phone more than 1 meter. Anyone experiencing this problem????
Click to expand...
Click to collapse
I did not find a solution yet! You yeah?
Jackal107 said:
I did not find a solution yet! You yeah?
Click to expand...
Click to collapse
I have the same issue with my headset. Hope someone will find a solution soon.
I too have same problem!!
Whats wrong with samsung!!, sometime Wifi problem and sometime bluetooth.:silly::silly:
earlier I was on 4.1.2 and it was working good with my jabra clipper bluetooth headset, after updating to 4.4.2 it sucks!.
according to my observation,
The OS is trying to save battery by limiting the bluetooth signal strength!, and the same problem with wifi also.:silly:
Looking for a workaround. If i find any will post for sure.
I have the same issue with my Note 2 after update to 4.4.2..
It seems to be a distance problem with my headset, every distance more than 50 cm creates
sound break up´s .. In my car the phone has a fixed place, it happens too, but not this much.
Maybe it is caused by a lower power managment for BT after update ?!
Found some others having the same issue e.g. here
http://androidforums.com/samsung-ga...nge-extremely-dropped-after-4-4-2-update.html
Frank67 said:
I have the same issue with my Note 2 after update to 4.4.2..
Found some others having the same issue e.g. here
http://androidforums.com/samsung-ga...nge-extremely-dropped-after-4-4-2-update.html
Click to expand...
Click to collapse
Yepp, I know that threat. But on my N7100 nothing works. In the meantime I'm on Paranoid ROM with 4.4.4 and it's a little better, but not much.
Frank67 said:
I have the same issue with my Note 2 after update to 4.4.2..
It seems to be a distance problem with my headset, every distance more than 50 cm creates
sound break up´s .. In my car the phone has a fixed place, it happens too, but not this much.
Maybe it is caused by a lower power managment for BT after update ?!
Click to expand...
Click to collapse
Hi
and have the same problem with the bluetooth, the phone in my pocket, Samsung headphones on the head and lose the music signal, conclusion .... android version
Before to upgrade I had 4.3 and works very well and now I upgraded to 4.4.2 my Note 2 with Phantom_V7.0 and work awesome but has a minus....... the bluetooth signal gets lost and it's not about the power,for ex i have battery with 4200 mAh
I will continue to keep looking this problem and I will return
There is no way to get better connection. The only way is using a 4.3 ROM
Seems like the problem is solved.
Hey guys!
It seems to me I’ve found the solution!
But firstly, a few words about the problems I’ve got…
I have Samsung Galaxy Note 2 and, when I decided to replace my old Plantronics Discovery 975 with their Voyager Edge, it had installed Android 4.3.
Both events, start using the new Bluetooth devise and upgrading to KitKat (4.4.2) occurred almost simultaneously, so it was pretty difficult to recognize what was the source of the problems that I run into – hardware/firmware issues of Voyager Edge or KitKat’s quirks. The problems were the following:
- Poor Bluetooth connection that resulted in distorted sound (not always, but often) thru the headset.
- Regularly losing the ability to use various Edge’s features, such as calling back to the last number, checking the battery status, recognizing who's calling, etc.
- Note’s battery drained badly – instead of 50-60% left at the end of the day, I got 10%...
I spoke several times with Plantronics support, but they ended advising me to replace the headset. I have neither found the specific solution in the internet and it was even reported that the factory reset would hardly help. So, that was almost the dead-end. But there was one pretty weird solution that helped to some people – deleting the duplicates in the phone’s contact list. But, since I had NO duplicates, it didn’t seem to be helpful. But then, I noticed one very strange detail – during the moments when Edge worked properly it correctly pronounced the names from my phone book, even tho some of them were quite unusual for English speaking "robot". All of them, but one – my mother’s record, which was a simple “Mom”, but when she called me, the Edge’s notification was definitely not “calling from mom”…
So, I just renamed “mom” to “mother”!
Guys, can you believe that, but ALL the problems (both phone’s and headset’s) have just gone! I’ve been using it for almost a week already and it’s OK. So, you may check your contact list, whether it sounds correctly.
Well, one issue left – weird/funny bug of the Edge’s firmware – start playing music when you take it off the cradle. (2 latest firmware updates didn’t cure that…). I just long press the voice button on the Edge to pause it. Not a big deal, to be honest.
Oh, just one last note – since Voyager Edge cannot be rebooted you can do the following if/when you neither hear the music (!), nor the report that the headset is connected when you take it off the cradle. Just long press the Call button on the headset (in my case it runs Note’s S-voice) and then everything works just fine. (Checked twice.)
Hope that this will help you too.
Cheers,
Max
Hi Max,
nice story, but I can't belive that this entry or change of entry will make the BT signal better.
cheers
Harvey
harvey186 said:
Hi Max,
nice story, but I can't belive that this entry or change of entry will make the BT signal better.
cheers
Harvey
Click to expand...
Click to collapse
Hi Harvey,
Absolutely the same reaction was mine, when I read the comment by dawolverune (see page 1 of this thread). How deleting duplicate contacts might help…
Well, if assume that I tell the truth (and I actually do! ), then the solution may be explained in 2 ways: a) logical – I’ve been hammering with all this stuff for almost a week and nothing helped until I renamed that single contact and then, it just start working and b) technical – since Voyager Edge pronounced the wrong name it means that it took it from somewhere, but definitely from the wrong place and this might require extra “efforts” from the Bluetooth receiver/transmitter, etc. This indeed may result in abnormal behavior of the devise and “eating” the battery. If re-phrase the title of S. Coppola’s movie – here we had “Lost in Bluetooth” case.
Cheers,
Max
hack fix
Jackal107 said:
4.4.2 ROM bluetooth does not work well!
Phone connected to the bluetooth headset is not working well. Sometimes the connection is lost!
4.3 ROM is not such a problem.
Does anyone have a similar problem?
Can anyone help?
Click to expand...
Click to collapse
Am guessing someone has a fix to this issue by now, if so let everyone know
if not i just tried a hack that seems to work. when facing crackling/distortion of audio on Note2 just switch on the WiFi hotspot and range seems to improve
hope it helps......plzz educate about downsides of this hack
ivan_109 said:
Am guessing someone has a fix to this issue by now, if so let everyone know
if not i just tried a hack that seems to work. when facing crackling/distortion of audio on Note2 just switch on the WiFi hotspot and range seems to improve
hope it helps......plzz educate about downsides of this hack
Click to expand...
Click to collapse
cool, it seems, that this hack is working
Thx
Jackal107 said:
4.4.2 ROM bluetooth does not work well!
Phone connected to the bluetooth headset is not working well. Sometimes the connection is lost!
4.3 ROM is not such a problem.
Does anyone have a similar problem?
Can anyone help?
Click to expand...
Click to collapse
I have the Exact Problem, and no one seems to have a solution to this. Did u find any by any chance ??
Thanks
SOLUTION OF BLUETOOTH DROPPING after 4.4.2 update
Yo !
I found the solution. No one has to downgrade Note 2 (N7100) to Jelly-bean in order to fix the Bluetooth range and WiFi dropping issue.
The fault is with the latest update from Samsung itself, May be it is a tactic to make people shift to the newer phones.(who knows) !
Anyway the solution to this problem is to Flash it with Odin it a previous release of 4.4.2.
In my case which is from the INU (India) region the release of August that is 29.08.2014 is a faulty update.
So i downloaded the older one and flashed it.. then everything worked perfectly as if the phone was new
Here is how to do it:- [BACKUP YOUR PHONE WITH KIES 3]
1. Check your version from *#1234#, Compare the version with Near August version of your Region. If it is same you better change it to get a way better performance.
2. Look up the earlier ROM version released from samsung-updated .com , http://samsung-updates.com/device/?id=GT-N7100&details=Galaxy_Note_2__International , I personally flashed it with the first version of Kit-Kat that came for note 2 in INU region. on the 8th April (08.04.2014).
3. Download ODIN http://www.mediafire.com/download/mbvtjub21ehsxrl/Note+2+Odin.zip
4. Install Samsung USB drivers http://www.mediafire.com/download/9qaqkld45387lzi/Skyrocket_GSII_ADB_Drivers.zip
[IF THE LINKS DON'T WORK then GOOGLE THEM AND INSTALL]
5. Power off your Samsung Note 2.
6. Hold Volume Down, Power, and Home Buttons at the same time. You will enter the ODIN DOWNLOAD MODE on your phone.
7. Press Volume up to Continue. It will Show "Downloading" "do not power off"
8. Connect your device to the PC where you have put ODIN and the md5 file (Firmware you want to flash with)
9. It will show connected to your device name on the top left of ODIN which means that it recognizes your device.
Click on PDA and select the firmware that u downloaded to flash Note 2 with.
It will lag for a few seconds but let it take its time.
When it is done. [Refer Image attached]
10. Press Start [It will take around 5 minutes, 3 minutes give or take]
11. It will Automatically Reboot your phone. Do not disconnect the USB cable.
After the boot is Complete ODIN will show a PASS on the left Side. Which means that the Flashing Process has been a Success.
If it shows fail then Repeat the process from STEP 6 all the way till STEP 11.
{ RECOVERY STEPS:- this will wipe all your data}
[Also, If device is Stuck at setup connection or on any other process, then disconnect your Note 2 from PC, close Odin, remove phone’s battery and put it back inside AFTER 5 seconds, press Volume up, Home key and Power key at the same time, When the Logo comes then Leave the Power button but keep pressing the other 2. Wait for it to show MANUAL MODE. Select Wide Data and Factory reset with Volume down and press power to continue, Then again wipe Cache.
Select Reboot . Now it should work perfectly.
CAUTION :- DO THIS AT UR OWN RISK.
Is this problem appears in official update? Want to update, but dont want any probs)
Yes the problem is with the official update. Better not update it till there is another update of it available.
I'm thinking this might have to do with Samsung dropping the Bluetooth version from 4.0 back to 2.0. I have no idea why they would do that but I've been wondering why my phone listed version 2.0 when the specs for this phone always said version 4.0. As you can see my debug screen shows it as version 2 and not 4.0. My Edge shows 4.0 on that same screen. I can't recall if older builds for the Note 2 had 4.0 listed but I believe they did and kitkat lowered it. Guess that's their trick to get people to upgrade, break things on our phones quietly...
Sent from my SM-N915P using XDA Free mobile app
Hi guys, I'm only starting this thread because I searched over 50 pages and tried different methods already.
After my Xperia Z3C decided to have major issues on the screen, I decided to go back to my SIII while I try to fix the Z3.
My S3 is still running perfectly under cm-11, the only problem is that I can't connect any calls, if I try to make a call both phones rings normally, but when the person answers the phone (or the other way around) the connection goes mute, no sound at all. After I hang up the call the SIII loses the networks for a couple of seconds and then it comes back up.
Viber and Skype works, messaging works, 3G Mobile Data connection works with no problem, and the phone only loses signal when I place or receive the calls.
I upgraded from cm-11-20150901-SNAPSHOT to cm-11-20160115-SNAPSHOT, installed a new modem, checked APN configuration and IMEI, the only thing left to do is to Odin flash back to stock android, and actually I don't want to do that, I love cm since the day I installed.
One thing to notice is that the SIII worked for quite some time with cm-11 without presenting this problem.
What else can I do? Thank you very much in advance.
Can no one help me?
Hi guys,
Kind of new to pocophone but I'm experiencing something really strange that I haven't on any other phone I've had before. Here's the background..
I bought the phone as a gift for my mum and she absolutely loves it but she's told me the phone will randomly make a call itself. I didn't believe it until I saw it happen. She can be on the phone (having made or received a call legitimately) and the call will automatically be put on hold waiting for her to answer a call from another person. The issue is, that person hasn't called her so when she calls back, the person is confused. This can also happen when she isn't on the phone
I checked her call waiting options (turned off and on, neither makes a difference) and reset the phone to factory settings but still getting the same issue. We haven't set up Google assistant or anything similar so the calls wouldn't have been made my a voice command either.
It's really strange and I've looked on the Internet but can't find anything reported on it. The phone is running miui 10 and she is on virgin mobile. The phone is less than 2 weeks old.
Any help is much appreciated.
Vik
Haven't faced something similar. If I were in your shoes, I would 1. Factory reset everything, 2. flashed latest global stable miui ROM and 3. checked again if the same problem persists.
melodystyle2003 said:
Haven't faced something similar. If I were in your shoes, I would 1. Factory reset everything, 2. flashed latest global stable miui ROM and 3. checked again if the same problem persists.
Click to expand...
Click to collapse
Thanks @melodystyle2003. I've tried a factory reset on the phone. When the phone does a factory reset, would that not install the latest stable miui ROM? It installed miui 10 and when I checked for updates on the phone, it informed me that there were no more updates available
I think the problem is, proximity sensor. This used to happen to older family member.
About phone->MIUI version, which version does it use?
green. said:
I think the problem is, proximity sensor. This used to happen to older family member.
Click to expand...
Click to collapse
Thanks @green. Did you ever find a solution to that proximity sensor issue?
melodystyle2003 said:
About phone->MIUI version, which version does it use?
Click to expand...
Click to collapse
@melodystyle2003 here's the version information I see when I go to about phone : Miui Global 10.1. Stable. 10.1.3.0. ( PEJMIFI)
vikz.t said:
@melodystyle2003 here's the version information I see when I go to about phone : Miui Global 10.1. Stable. 10.1.3.0. ( PEJMIFI)
Click to expand...
Click to collapse
This is the latest stable version.
Install the google dialer, and force stop the default one. Also, try switching your network connection, like if it's on 3G, shift it to 2G or vice versa, for some time.
And if proximity sensor is the cause (as mentioned by another fellow member), you can check the sensor wake up time through BBS or similar app. Proximity sensor does appear in the sesnor column of BBS app. And going through the wakelock's data, you might also be able to detect any other possible cause.
Have you tried switching off the 'redial automatically' option in the dialer options? That seems to be your problem.
vikz.t said:
Thanks @green. Did you ever find a solution to that proximity sensor issue?
Click to expand...
Click to collapse
It's not the hardware fault. Old people tends to keep the phone slight upwards while speaking, the proximity sensor wakes the screen and by accidentally registers the touch. This usually happens and the accidentally put the call on hold, accepts the second call or the add new call. You can try using the phone for a day.
Old thread, but just wanted to add that we have the same issue with a Pocophone we use at work. When you put away the phone after a call, then at random times it calls the last person you talked to before the current call. Does it about 1 out of 40 calls and is 100% a phone firmware issue, not some old lady holding her phone wrong.