Why does my sgs3 reboot by itself? Please anyone tell me what is the cause of this. My phone is rooted with siyah kernel.
Have the same issue here. Rom is WannamLite 2.0 (Based on XXBLG8). Kernel is Siyah 1.5 Beta 6.
Sometimes all of a sudden the bottom of the phone heats up a lot and the phone reboots.
monarchs said:
Why does my sgs3 reboot by itself? Please anyone tell me what is the cause of this. My phone is rooted with siyah kernel.
Click to expand...
Click to collapse
Which ROM are you using..It seems a case of bad flash..reflash the ROM after a full wipe..
Please do a search before you post...this question has been answered again and again...
---------- Post added at 02:18 PM ---------- Previous post was at 02:16 PM ----------
shuvadeep said:
Have the same issue here. Rom is WannamLite 2.0 (Based on XXBLG8). Kernel is Siyah 1.5 Beta 6.
Sometimes all of a sudden the bottom of the phone heats up a lot and the phone reboots.
Click to expand...
Click to collapse
Heating up problems may be caused by some rogue app...see which app is always running in the background and eating a lot of memory...uninstall that app..also if you can try some other kernel..
I had the same problem, it was the kernel so try a different one
I haave not have a single reboot nor on Stock, CM10, AOSP or SuperNexus. Stock and Syah kernels
I have a stock rom,i only have custom kernel,so whats the problem revooting by itself?. Sorry for being lazy on reading other forums,its kinda diffirent if youre the one asking the question.
Hello Everyone, (And Excuse my english)
My phone is freezing 2 or 3 times per day without any reason, everything is ok, phone pretty fast, and just like that, freeze and then nothing to do, i have to reboot... There is any way to detect the reason of this ? how can i solve it ?
Samsung Galaxy SII GT-I9100
ROM: Resurrection Remix JB v3.1.3
Kernel: Dorimanx 7.36
soufsouf said:
Hello Everyone, (And Excuse my english)
My phone is freezing 2 or 3 times per day without any reason, everything is ok, phone pretty fast, and just like that, freeze and then nothing to do, i have to reboot... There is any way to detect the reason of this ? how can i solve it ?
Samsung Galaxy SII GT-I9100
ROM: Resurrection Remix JB v3.1.3
Kernel: Dorimanx 7.36
Click to expand...
Click to collapse
I'm having the same thing happen. Try to go back to the stock rr kernel. I think dorimanx is having freezing problems.
Sent from my Nexus 7 using xda premium
I'm assuming that you guys flashed another ROM, or reflash and the issue persist.
Am I right?
---------- Post added at 08:14 PM ---------- Previous post was at 08:12 PM ----------
kilometers4 said:
I'm having the same thing happen. Try to go back to the stock rr kernel. I think dorimanx is having freezing problems.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
oops, didn't read that.
soufsouf said:
Hello Everyone, (And Excuse my english)
My phone is freezing 2 or 3 times per day without any reason, everything is ok, phone pretty fast, and just like that, freeze and then nothing to do, i have to reboot... There is any way to detect the reason of this ? how can i solve it ?
Samsung Galaxy SII GT-I9100
ROM: Resurrection Remix JB v3.1.3
Kernel: Dorimanx 7.36
Click to expand...
Click to collapse
Are you underclocking or undervolting at all? CPU/GPU
Any tweak scripts flashed? Though we all want to benefit from extended battery savings our phones are all different and this can sometimes lead to freezes or reboots...
Sometimes it can be related to overheating as well, so this is when under clocking (using a lower frequency) may be useful. Are you usually using your phone when it reboots or it reboots when it is sitting there?
If you arent underclocked or undervolted at the moment you can try using a different scheduler and governor through an app like Voltage Control or SetCPU. Otherwise as some individuals mentioned you can try using a different kernel. I think DorimanX at the moment is too new that there are some bugs that are being tweaked out. Since you're on JB (I assume the LSJ leak) you can either try stock PhilZ kernel, Jeboo 1.1 or Siyah Beta 4
Unfortunately I cannot ask questions in specific thread, so I would like to do it now.
I have a problem after flashing LS8, specifically Wanamlite v.14. For some time phone works perfectly, until it suddenly switches off. I am able to power it up, but it freezes on the first screen with logo and model number. I am however able to access recovery.
And so I did - accessed recovery, flashed rom again, unfortunately, the only thing that worked was to do a full factory reset.
It worked... for a while. Then the story repeated itself. This time I did exactly the same, but started digging: some reported, that it might be a problem with kernel, which is Philz newest 4.00 b22. So I changed kernel: Dorimanx 7.44 - got serious overheating problems and the same probem. Jeboo 1.2 - the same. I then discovered, that eg. Jeboo has something from Philz kernel, so I flashed earlier version of Jeboo 1.1f. I am currently at this stage. Oh, btw. my chip is insane, if it changes anything.
Can anyone please tell me if you had similar problems, maybe not only users of Wanamlite, but other roms (which would confirm problems with kernel)? Can anyone tell me if there is any solution? Or at least does anyone knows what is happening? It is getting really weird, as I have been reading post of people reporting identical problem as I have, but devs seem to avoid the topic... Or maybe you guys are working hard to find out what is the problem - in that case a simple one line statement "we are aware. working on it" will suffice. Please, I am starting to be desperate here...
Regards.
Try Siyah kernel v6 beta4. I am also using WannamLite and have no issues at all.
Odp: [Q] Black Logo Screen problem
Thank you for the tip. I found the kernel elsewhere, however is there a thread about siyah v6 somewhere here, on xda-developers?
I will test it against problems I encountered and report for future readers.
The question still stays: what happened to me and all these other people?
Sent from my GT-I9100 using xda app-developers app
clawz71 said:
Thank you for the tip. I found the kernel elsewhere, however is there a thread about siyah v6 somewhere here, on xda-developers?
I will test it against problems I encountered and report for future readers.
The question still stays: what happened to me and all these other people?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Yes it is, try to always download from xda.
You've experienced conflict between ROM & Kernel. Always check the custom ROM thread and read it upside down so you can spot potential issues regarding this kinda conflict.
Odp: [Q] Black Logo Screen problem
gastonw said:
Yes it is, try to [U/]always[/U] download from xda.
Click to expand...
Click to collapse
Could you point me in its direction? I have been using search extensively without any results.
gastonw said:
You've experienced conflict between ROM & Kernel. Always check the custom ROM thread and read it upside down so you can spot potential issues regarding this kinda conflict.
Click to expand...
Click to collapse
I did it, however, which is weird, only some of people reported it and dev, who in this case is Wanam, did not reply.
And I know, that it seems to be a conflict between rom and kernel, but how is it possible that not everyone had this issue while flashing Wanamlite with factory reset and kernel included in the rom? Nevertheless, I am sticking with Siyah for the while and see what happens.
Sent from my GT-I9100 using xda app-developers app
I have the same issue, it seems with LS8 whenever I reboot, there's a 50-50 chance my phone will "die" and I'll need a complete wipe and rom install
If I do a hot boot within Titanium Backup, guaranteed my phone will brake.
This happens with Siyah, PhilZ and Jeboo, it's not really a kernel issue, now a Wanamlite's issue since people on NEATROM also said they suffered the same issue, there's some problem with the firmware, seems that whenever the phone doesn't shut down properly, it won't start again.
Wish I could provide a log, but since phone totally dies, I don't know how to retrieve it.
@op: you got a siyah q&a thread sticked in the Q&A section.
Why don't you guys flash stock while you sort this out?
Custom ROMs will be updated soon now that ls8 is out. Therefore kernels will be updated as well.
Sent from the little guy
I'm having the same problem too. I have been using the Stock LS8 and Philz Kernel (4.00 b22-b30). I stopped using Siyah b4 in the previous JB Stock Leak because I had isues with the camera freezing.
Any suggestion?
clawz71 said:
Unfortunately I cannot ask questions in specific thread, so I would like to do it now.
I have a problem after flashing LS8, specifically Wanamlite v.14. For some time phone works perfectly, until it suddenly switches off. I am able to power it up, but it freezes on the first screen with logo and model number. I am however able to access recovery.
And so I did - accessed recovery, flashed rom again, unfortunately, the only thing that worked was to do a full factory reset.
It worked... for a while. Then the story repeated itself. This time I did exactly the same, but started digging: some reported, that it might be a problem with kernel, which is Philz newest 4.00 b22. So I changed kernel: Dorimanx 7.44 - got serious overheating problems and the same probem. Jeboo 1.2 - the same. I then discovered, that eg. Jeboo has something from Philz kernel, so I flashed earlier version of Jeboo 1.1f. I am currently at this stage. Oh, btw. my chip is insane, if it changes anything.
Can anyone please tell me if you had similar problems, maybe not only users of Wanamlite, but other roms (which would confirm problems with kernel)? Can anyone tell me if there is any solution? Or at least does anyone knows what is happening? It is getting really weird, as I have been reading post of people reporting identical problem as I have, but devs seem to avoid the topic... Or maybe you guys are working hard to find out what is the problem - in that case a simple one line statement "we are aware. working on it" will suffice. Please, I am starting to be desperate here...
Regards.
Click to expand...
Click to collapse
reading threads + trial & error.
Sent from the little guy
Odp: [Q] Black Logo Screen problem
gastonw said:
reading threads + trial & error.
Sent from the little guy
Click to expand...
Click to collapse
We do it. We read threads and do trial and error. I even started a separate thread to report our trials to the community. This one
Thank you for your input.
pedroren said:
I'm having the same problem too. I have been using the Stock LS8 and Philz Kernel (4.00 b22-b30). I stopped using Siyah b4 in the previous JB Stock Leak because I had isues with the camera freezing.
Any suggestion?
Click to expand...
Click to collapse
Well I am still on siyah v6.b4. So far so good. But I am not too happy with battery life... You might try jeboo 1-1f, as some reported it doesn't cause any problems. I had jeboo 1-2 for a while but out generated the same bootloop...
Sent from my GT-I9100 using xda app-developers app
Odp: [Q] Black Logo Screen problem
gastonw said:
Custom ROMs will be updated soon now that ls8 is out. Therefore kernels will be updated as well
Click to expand...
Click to collapse
What do you mean by that? We are discussing here ls8 kernels, aren't we? Newest Phillz is a stock one based on ls8, afaik.
Sent from my GT-I9100 using xda app-developers app
[Sorry for double post, I thought it merges automatically]
I truly don't know what was being discussed here, If I posted that is because I must think that all ls8 kernels are in beta.
Man, I really gotta get some sleep
Sent from the little guy
First off, hello guys and girls, a long time forum crawler but i've only just bit the bullet and registered
Recently picked myself up an SIII (i9300) rooted up and decided to go with Omega, but i've found that whenever i flash a kernel, all will go ahead as normal, flashes fine and i reboot, to be left with a black screen and some varying vibration patterns depending on the kernel flashed... I've tried Perseus (the main one i'd like to see working) aswell as siyah, but neither chose to boot.
Both specified to work on samsung based roms, and i'm not on 4.2.2 (only 4.2.1) so that isn't the problem... So here i am; Where am i going wrong?
Thank you ahead of time
are you sure you've got a i9300?
Glebun said:
are you sure you've got a i9300?
Click to expand...
Click to collapse
Absolutely positive, any idea's?
Ailio said:
Absolutely positive, any idea's?
Click to expand...
Click to collapse
im pretty sure it doesnt work with the samsung 4.2 roms. if you flash 4.1.2 it will work.
Drew071
---------- Post added at 01:55 PM ---------- Previous post was at 01:41 PM ----------
drew071 said:
im pretty sure it doesnt work with the samsung 4.2 roms. if you flash 4.1.2 it will work.
Drew071
Click to expand...
Click to collapse
if you look on the perseus thread it states it does not work on 4.2.2 samsung roms. There arent any 4.2.2 sammy roms so im pretty sure its meant to say 4.2.1 and the OP mistyped.
drew071
yeah, missed that. most kernels don't support 4.2
Greetings everyone,
Recently my girlfriends S3 started having these Screen artifacts/Graphical glitch and I have no idea what is causing it. I am hoping that someone would be willing to help me out on this, as I have yet to experience anything like this personally. She is rooted and running a custom Rom and kernel.
It seems to start after opening random apps, usually games. Rebooting seems to get rid of the problem. Her phone is not overclocked/underclocked and never overheats.
Her system setup is:
Rom: XXUGMJ9 NeatROM lite v5.3
Kernel: boeffla-kernel 5.1
Video can be found here of the problem.
http://www.youtube.com/watch?v=mipUhfddkKA&feature=youtu.be
Thanks in advance
Try stock Rom
GR0S said:
Try stock Rom
Click to expand...
Click to collapse
Thanks for your response, but she had a previous version of neatrom without any issues for 7 months or so. I'll try reverting to a previous or another Rom but sock is too bloated and slow
Sent from my SM-N9005 using XDA Premium 4 mobile app