[Q] Galaxy W - 3G connection lost after each restart - Android Q&A, Help & Troubleshooting

Hi all,
I've been using my Samsung Galaxy W for quite a while now, but have only recently given any serious attempt at setting up the phone's 3G connection. I have entered the correct APN data for my provider - using Telstra after unlock - and all settings are correct, as I was initially successful in getting a data connection. However, I ran into an issue when I shut down my phone. Whenever I start the phone back up, I get a glimpse of the 3G icon in the message tray, but after Media scanner has done its thing, that 3G icon then disappears. Initially I could no longer connect via 3G, no matter what settings I fiddled with.
Eventually, I found that the only way to fix the error was to dial *#*#4636#*#*, access the phone info menu, and then to manually enable the data connection. Even more confusing is that when I hold down the power button, my phone states that the data connection is already, and always was, enabled. My packet data is also on... and the phone has not put itself in flight mode. Also, as I said, the APN settings are definitely correct.
Does anyone know why I must manually enable the data connection whenever I restart my phone?
Thanks in advance for any assistance.
Paul
Phone is rooted and running gingerbread 3.3.6

Related

Help: Wifi not connecting

Since Yesterday my wifi hasnt been working. It just randomly stopped connecting and im not sure why. It askes me for my network code and when i type it it (exactly how it is) it says network key incorrect and wont work. and when im at my friends house whhere there is no need for a network key, it says that IE cannot display the page. Also it keeps trying to dial out verizon broadband when my wifi switch is on. Isnt it not supposed to do that?
Just because the Wifi switch is on does not mean the wireless is enabled. Have you tried using the connection management button (the one just below the power button) to bring up the connectons screen nd make sure that WLAN is enabled and it's not in flight mode or anything.
Also go to Start > Settings >Connections > Wireless LAN
Check the MAIN Tab.. you should see all the fields filled in and a signal Quality Meter.
The ADVANCED Tab will show your IP and Status..
That should help you determine if you are really are connected.
yes my wifi is enabled in the connections manager. and in the settings it does not show that i am connected to a network.
when you search for wireless networks, do you SEE yours? or are you entring it manually?
yes i see mine. It pops up to notify me and asks for my Network key. and when i enter it it tells me its wrong but i know its not beacause i was looking right at the linksys network on my home computer.
I seem to remember there being an issue with WPA keys at some point.
Try removing the security from the access point... then try to connect. (I'm not suggesting this as a perminent fix, just to see if it's a problem connecting, or a problem with the encryption. Turn the Security back on after the test.)
I know you tested at a friends.. but try this anyway. If you can connect ok, then you have an encryption issue... if you still cant, you have an issue with the wireless itself.
what ROm / Radio do you have?
What kind of security do you use? WEP? / WPA-PSK?
How Long is your key?
Yes i think its my encryption becasue i went to work today (A campground) and connected to their unsecured network right away. My friends internet is always messed up anyway.
I am using DCD 3.2.5 ROM
and radio 3.42.50
Its a WEP Encryption and the code is 10 characters long

Urgent help before I go insane with data connection on SGS2

Hi All - I am a UK Orange user and I have searched all over the place for a resolution to my problem
This morning I turned off the dormancy mode to see if it would help me at all in getting better network speeds and it appears that doing this process has caused my data connection to turn off.
When i look in the options I can enable the data connection but I never get the icon at the top nor do i actually have the ability to send or receive any data from my phone
To resolve the problem I have flashed my phone with the latest RevoHD rom - this has not worked
Flashed the latest Siyah Kernal - this has not worked
Re-Enabled fast dormancy - this has not worked
Checked my APN settings and they all appear fine
When i try to search for a network provider I get the following error - Unable to change networks during data service activated. do you want to disconnect the data service and change available network
When i press OK the changes appear to be made I dont appear to have any data connection
Please can someone help me out in this situation as its starting to concern me
I look forward to your help
Many Thanks

JB broke my wifi

I've tried searching and haven't found anyone with the same issue as I.
Jellybean broke my wifi, I had no connection issues before whatsoever.
Now, it still shows it's connected to the network with full strength but when I go to use the internet or any apps, it says there is no network connection, webpage unavailable, no autosync, etc. Things are fine when I go back to 3G and nothing has changed on my phone but the JB update. I've turned Sprint Optimizer off and on, deleted and manually readded all the wifi networks, and am not sure what else to do besides hard reset. Any ideas? Also, I am not rooted.
ispatonyourgrave said:
I've tried searching and haven't found anyone with the same issue as I.
Jellybean broke my wifi, I had no connection issues before whatsoever.
Now, it still shows it's connected to the network with full strength but when I go to use the internet or any apps, it says there is no network connection, webpage unavailable, no autosync, etc. Things are fine when I go back to 3G and nothing has changed on my phone but the JB update. I've turned Sprint Optimizer off and on, deleted and manually readded all the wifi networks, and am not sure what else to do besides hard reset. Any ideas? Also, I am not rooted.
Click to expand...
Click to collapse
have you done a complete network reboot (cable modem and wifi router) when having the crappy sprint connection optimizer off?
if this helps you feel free to hit the thanks button
Thanks for the help! I found the answer in another thread... Seems JB automatically turns on "DLNA auto-ip" for some people. The fix that worked for me was Settings>Wifi>Menu>Advanced and uncheck "DLNA auto-ip" at the bottom.

[Q] Wifi connection problem - Omega rom v35

Hey guys,
Wasnt sure where to post this. Have a question regarding wifi conection settings. I was on omega v34 and everything was fine. My phone connected to all wifi networks I wanted it to. I updated to v35 of the rom and now I have a strange problem.
My phone still connects to my house wifi and work wifi, but refuses to connect to my parents wireless. Ive reset their router, changed the password and removed the settings for the network on my phone. When I refresh and attempt to connect to it all I get is "authenticating" and then it will give up. It is a BT home hub and the strange thing is that my phone will connect to the 'free wifi' BTwifi-with-FON and the BTwifi, but not the proper network zone BTHub3-T2G6. Its incredibly annoying.
Are there any hidden settings in my phone that may have the wrong settings for the network in it?
Any help would be appreciated
EDIT: Just turned the security off on the network and the phone connects fine. I dont understand why the security key would cause problems as it connected before the update and the settings havent changed.
check my sig

Question Failing to switch to cellular data with "Mobile data always active" switched off

If I go into developer settings and switch off Mobile data always active (in an attempt to save a little power when the phone is on Wifi), I find the phone often doesn't enable data when I leave Wifi. I have to cycle airplane mode to make it do it.
Anyone else finding the same bug? Or even using this setting?
I've had dropped connection issues since day 1, with airplane mode being the only way to restore my connection. And this was with Mobile Data always active set to on.
Who is your Carrier??
Have you noticed similar issues even with mobile data always active?
When I go to building with no cellular and come back outside. The phone doesn't automatically reconnect to cellular, leaving me with no service. What a strange bug.
JonnyTrulove said:
I've had dropped connection issues since day 1, with airplane mode being the only way to restore my connection. And this was with Mobile Data always active set to on.
Who is your Carrier??
Have you noticed similar issues even with mobile data always active?
Click to expand...
Click to collapse
EE in the UK. Works fine almost all the time so far if I keep mobile data active.
Vodafone Romania, toggled the setting off in dev options as soon as I got the phone. Data switching works fine still.
Try going into the testing menu (dialer code *#*#4636#*#*), select phone information, select 3dot menu on top right corner, try switching around between Europe and automatic. I'm my case ,selecting Europe presented various weird connection issues , biggest of which was that the phone refused to connect to LTE unless I used "automatic".

Categories

Resources