Yesterday I wasted a significant amount of time trying to update my stock AT&T branded HTC Titan from 7.1 (7720) to 7.8. I figured I would provide what I learned in order to get it working.
1. Backup your phone.
2. If you haven't updated your bootloader from the one that shipped with the phone, you need to do so. You'll get an error otherwise.
Instructions and download link here. I had to factory reset my phone before the HTC update program would recognize that the Titan was connected to my PC.
3. Follow the standard instructions from here: http://forum.xda-developers.com/showthread.php?t=1306415, choosing everything from 7720 (7.0.7403.0 - 7.10.8107.79) to the recent 7.8 cabs. I only needed the English language files for my update to work. You can put them all in the root folder for WP7 Update Cab Sender. Hit send.
4. Wait patiently.
5. Setup your phone again.
6. Enjoy.
I'm not responsible if this doesn't work for you, or if it messes up your phone. I just thought it might be helpful to someone not looking to waste their time.
outismetis said:
Yesterday I wasted a significant amount of time trying to update my stock AT&T branded HTC Titan from 7.1 (7720) to 7.8. I figured I would provide what I learned in order to get it working.
1. Backup your phone.
2. If you haven't updated your bootloader from the one that shipped with the phone, you need to do so. You'll get an error otherwise.
Instructions and download link here. I had to factory reset my phone before the HTC update program would recognize that the Titan was connected to my PC.
3. Follow the standard instructions from here: http://forum.xda-developers.com/showthread.php?t=1306415, choosing everything from 7720 (7.0.7403.0 - 7.10.8107.79) to the recent 7.8 cabs. I only needed the English language files for my update to work. You can put them all in the root folder for WP7 Update Cab Sender. Hit send.
4. Wait patiently.
5. Setup your phone again.
6. Enjoy.
I'm not responsible if this doesn't work for you, or if it messes up your phone. I just thought it might be helpful to someone not looking to waste their time.
Click to expand...
Click to collapse
Upgrade your bootloader to what; the HTC update to 2.6.160015.3 or Cotullah's HSPL? If you opt to use Cab Sender you may update from 7720 to 7740 to 8107 to 8112 to 8773 one build at a time or if you set it up correctly all of the incremental builds in order. I'm assuming you tacked on 8858 to the list or did it separately. I'm curious to know if there is anything different at the core of the "official" update than what currently is available on custom ROMs but for those of us who are HSPL and using 7.8, we'll patiently wait until chefs here take a look at it and deploy their magic.
berrywr said:
Upgrade your bootloader to what; the HTC update to 2.6.160015.3 or Cotullah's HSPL? If you opt to use Cab Sender you may update from 7720 to 7740 to 8107 to 8112 to 8773 one build at a time or if you set it up correctly all of the incremental builds in order. I'm assuming you tacked on 8858 to the list or did it separately. I'm curious to know if there is anything different at the core of the "official" update than what currently is available on custom ROMs but for those of us who are HSPL and using 7.8, we'll patiently wait until chefs here take a look at it and deploy their magic.
Click to expand...
Click to collapse
Yes, in order to do the cab method on the ATT Titan, you do need to upgrade to the 2.6 bootloader. -don't really know why though. As several Titans could not go through the full cab upgrade process to Tango without it.
Upgraded to 7.8
I used the jaxbot Seven-Eighter app on windows phone hacker website (its a name not a hack) and it worked like a charm. I have (had) a locked 7720 ATT Titan (1) and used first jaxbot's updater to make sure the phone had 7720, then upgraded thru all the intermediate releases to 8858. Yeah it took some time, maybe 5-7 minutes per build, but after 30 minutes I was done with no loss in already installed apps, texts, phone calls, passwords or....
8858 is not such-a-much in the "bells and whistles" department; in fact, the only changes I saw (as expected) were the ability to small size the tiles and have more and starker background colors. I am sure there are lots of under-the-covers changes and bug fixes that are not so obvious. But after failing to upgrade my Titan while trying debranding, CABing to gold carding over the past year, all to no avail, it sure was nice to smoothly go to 7.8.
And what a rush. After a year of no ROM loads on the Titan, compared to having averaged 1 new flash PER WEEK on my Fuze, Tilt I, Tilt II, and HD7S - wow what a fix.
derylmccarty said:
I used the jaxbot Seven-Eighter app on windows phone hacker website (its a name not a hack) and it worked like a charm. I have (had) a locked 7720 ATT Titan (1) and used first jaxbot's updater to make sure the phone had 7720, then upgraded thru all the intermediate releases to 8858. Yeah it took some time, maybe 5-7 minutes per build, but after 30 minutes I was done with no loss in already installed apps, texts, phone calls, passwords or....
8858 is not such-a-much in the "bells and whistles" department; in fact, the only changes I saw (as expected) were the ability to small size the tiles and have more and starker background colors. I am sure there are lots of under-the-covers changes and bug fixes that are not so obvious. But after failing to upgrade my Titan while trying debranding, CABing to gold carding over the past year, all to no avail, it sure was nice to smoothly go to 7.8.
And what a rush. After a year of no ROM loads on the Titan, compared to having averaged 1 new flash PER WEEK on my Fuze, Tilt I, Tilt II, and HD7S - wow what a fix.
Click to expand...
Click to collapse
You're Air Force? I'm a former weather forecaster now in college full-time majoring in mathematics (calculus) to compliment my meteorology training. HSPL is by no means an easy task though I successfully did it twice but each very different experiences. Prior to HSPL the devices I incrementally added those builds too via Cab Sender. I'm not aware the official release is any different than those of us custom flashing our devices; the build we're using is also 8858.136 and as you know when it boils down to the OS it's mostly cosmetics though I saw some security updates and Bluetooth compatibility but like 7.x and 8.x you still can't use a Bluetooth keyboard on the Titan. What drove me nuts about Windows Phone is the inability to side load apps which I think is just ridiculous. There is an incredible amount of apps out there not on any the varying Marketplaces which again seems stupid to me but by far Nokia has a good selection of apps though many are redundant among the other device makers. I loved my Rhodium (Touch Pro 2/Tilt II) which I flashed the hell out of that thing and continue to use it as a GPS device and backup phone. I have an HD2 that like many here I've done about everything with and it runs Windows Phone 7.8 flawlessly though at the moment I have Jellybean on it.
berrywr said:
Upgrade your bootloader to what; the HTC update to 2.6.160015.3 or Cotullah's HSPL? If you opt to use Cab Sender you may update from 7720 to 7740 to 8107 to 8112 to 8773 one build at a time or if you set it up correctly all of the incremental builds in order. I'm assuming you tacked on 8858 to the list or did it separately. I'm curious to know if there is anything different at the core of the "official" update than what currently is available on custom ROMs but for those of us who are HSPL and using 7.8, we'll patiently wait until chefs here take a look at it and deploy their magic.
Click to expand...
Click to collapse
but my device is error HSPL.i update your bootloader to 2.6,but it isn't succesfull.HElP ME!
thuan92xd said:
but my device is error HSPL.i update your bootloader to 2.6,but it isn't succesfull.HElP ME!
Click to expand...
Click to collapse
naw, try seven eighter..and see if that works first...
derylmccarty said:
I used the jaxbot Seven-Eighter app on windows phone hacker website (its a name not a hack) and it worked like a charm. I have (had) a locked 7720 ATT Titan (1) and used first jaxbot's updater to make sure the phone had 7720, then upgraded thru all the intermediate releases to 8858. Yeah it took some time, maybe 5-7 minutes per build, but after 30 minutes I was done with no loss in already installed apps, texts, phone calls, passwords or....
8858 is not such-a-much in the "bells and whistles" department; in fact, the only changes I saw (as expected) were the ability to small size the tiles and have more and starker background colors. I am sure there are lots of under-the-covers changes and bug fixes that are not so obvious. But after failing to upgrade my Titan while trying debranding, CABing to gold carding over the past year, all to no avail, it sure was nice to smoothly go to 7.8.
Click to expand...
Click to collapse
Is there a difference between upgrading to 7.8
- via the seven eighter or
- via the official at&t update (that is not available yet)?
It's probably a stupid question as at&t doesn't have anything for the Titan, but I'm wondering if there are differences usually?
Different marketplace? Different drivers? Different ringtones? Anything?
Update: I see it doesn't change anything, which is pretty cool!
mreaglejr said:
Is there a difference between upgrading to 7.8
- via the seven eighter or
- via the official at&t update (that is not available yet)?
It's probably a stupid question as at&t doesn't have anything for the Titan, but I'm wondering if there are differences usually?
Different marketplace? Different drivers? Different ringtones? Anything?
Update: I see it doesn't change anything, which is pretty cool!
Click to expand...
Click to collapse
There "might"/should be a new bootloader -seeing the ATT Titan is still at stock SPL ..."IF" ATT does push out the update. But seeing that T-Mobile skipped the official 7.8 update for their devices, my reassurance that the ATT Titan will actually receive an official update is somewhat diminishing now.
But honestly, everyone is better off just doing the cab method...or attempting the unlock process. Grandma death will be knocking at your door if you end up waiting for an official update from our stupid carrier.
xconomicron said:
There "might"/should be a new bootloader -seeing the ATT Titan is still at stock SPL ..."IF" ATT does push out the update. But seeing that T-Mobile skipped the official 7.8 update for their devices, my reassurance that the ATT Titan will actually receive an official update is somewhat diminishing now.
But honestly, everyone is better off just doing the cab method...or attempting the unlock process. Grandma death will be knocking at your door if you end up waiting for an official update from our stupid carrier.
Click to expand...
Click to collapse
Completely agree with that last sentiment; twice promises were made and twice broken and now there is this stupid law in regards to carriers and subsidy "locked" devices.
berrywr said:
Completely agree with that last sentiment; twice promises were made and twice broken and now there is this stupid law in regards to carriers and subsidy "locked" devices.
Click to expand...
Click to collapse
Give a cookie to the carriers...the next thing they want, the entire batch.
same error with seven eighter on my titan, now i tryed on cingular rom, update from 8112-8773 shows the error, i slected corresponding language,what is problem?
nikola92 said:
same error with seven eighter on my titan, now i tryed on cingular rom, update from 8112-8773 shows the error, i slected corresponding language,what is problem?
Click to expand...
Click to collapse
interesting, I used seven eighter on a half-bricked ATT titan (stuck on the euro 1.9 rom). the only errors I got were after the update process...with certain languages not installed -causing applications to not respond. I flashed via goldcard to the 1.9 rom after and redid the update process with the correct languages and everything worked.
I know you have been half-bricked for awhile nikola, is it possible for you to flash via goldcard to a euro rom? IF so you would most likely get the 7.8 update through zune (which I was actually working for me until I decided to just do the seven eighter app).
its like u said install spl 2.6 and we roll now i have wp 7.8
I am on HSPL and for some reason I cannot upgrade to SPL 2.6. It loads fine via RUU but the SPL never changes to 2.6, stays stuck on 2.5 even though I have HSPL. Beccause of this I guess I cannot get 7.8 update either
nikola92 said:
its like u said install spl 2.6 and we roll now i have wp 7.8
Click to expand...
Click to collapse
lund123 said:
I am on HSPL and for some reason I cannot upgrade to SPL 2.6. It loads fine via RUU but the SPL never changes to 2.6, stays stuck on 2.5 even though I have HSPL. Beccause of this I guess I cannot get 7.8 update either
Click to expand...
Click to collapse
It will never change to SPL 2.6 after flashing the 2.6 SPL. -simply because you are stuck.
However, for some reason, it will let you upgrade to 7.8 if you do flash 2.6 (even though it did not change)
true +1
Great Info on upgrading HTC Titan to Windows 7.8
Thanks a million. I had wasted a couple of evenings trying to upgrade and keep getting error messages. I followed your recommendation and updated my bootloader from the HTC website and used the Sharp&7Loader and that was it. After about one hour I have 7.8 on my HTC Titan phone.
outismetis said:
Yesterday I wasted a significant amount of time trying to update my stock AT&T branded HTC Titan from 7.1 (7720) to 7.8. I figured I would provide what I learned in order to get it working.
1. Backup your phone.
2. If you haven't updated your bootloader from the one that shipped with the phone, you need to do so. You'll get an error otherwise.
Instructions and download link here. I had to factory reset my phone before the HTC update program would recognize that the Titan was connected to my PC.
3. Follow the standard instructions from here: http://forum.xda-developers.com/showthread.php?t=1306415, choosing everything from 7720 (7.0.7403.0 - 7.10.8107.79) to the recent 7.8 cabs. I only needed the English language files for my update to work. You can put them all in the root folder for WP7 Update Cab Sender. Hit send.
4. Wait patiently.
5. Setup your phone again.
6. Enjoy.
I'm not responsible if this doesn't work for you, or if it messes up your phone. I just thought it might be helpful to someone not looking to waste their time.
Click to expand...
Click to collapse
Related
Now this isn't completely my own guide, it is a guide hobbled together from other people's own guides, but has always worked for me. I run a Titan like the rest of you. My flavour is the HTC P4000 sold through Telus.
**INSTALLING FROM USB**
1. First, you'll want to BACK UP AT LEAST YOUR CONTACTS and anything else in the phone memory that you cannot live without Anything on your memory card will not be an issue.
2. Get your unlock code, msid, and msn and any other account/phone info before updating to a gps/rev. a radio as some people have lost it during the transition. they can view their info using ##778# on sprint phones ans they can use getspc to get their unlock code from their esn hex. (contributed by elgreek84).
3. Download Olipro 2.40.0 by clicking on the following link. http://www.fileshex.com/download.php?file=b8a2c4622ebdb1c857ac6cf068e6f818 and install it.
4. Download the latest Sprint rom, becaues it upgrades you to the latest Radio ROM 3.35.04 effortlessly. The Sprint rom is available from the HTC usa support site here. http://www.htc.com/us/FAQ_Detail.aspx?p_id=75&act=sd
Click on "Download Version 3.35.651.2".
5. Make sure your phone is connected through usb and start the last program you just downloaded. Once it is complete and it asks you to adjust your stylus settings, press the right side power button, camera button at the same time, and also press in the bottom reset button and HOLD IT until you see the multi colour boot loader. It'll look like a tv test screen.
6. Now at this point you'll need to go into Activesync settings, should be connection settings. In Vista (yes, I use Vista 64 bit and it works perfectly) go into the control panel and double click on "Windows Mobile Device Center" and uncheck the usb connection. In WinXP in Activesync it should be under the connection settings under file or edit.
7. Right.. now you're ready to download the latest rom which is compatible with the radio you flashed. If you're on Sprint and want regular Sprint, go ahead and stop at step 4 and configure the stylus settings, but if you want even better, go to DCD's rom here http://forum.xda-developers.com/showthread.php?t=376150 and install "ROMs (by |||bored|||):" I downloaded the Telus once since I'm on Telus.
8. Enjoy! Now install the apps and set up your settings, and synchronize your contacts and settings. Don't forget to re-enable that usb settings in the Windows Mobile Device center.
I'm fairly sure that pretty much covers it. This isn't my own work, I've just followed bits and pieces that are already available on this excellent website.
The DCD thread covered much of it but a few of you still seem to be having problems with it. I hope it helps those that are still out of the loop.
------------------------------------------------------------------------------------------------------------------
Installing from SD card. (contributed by Keystone).
Easy installation:
HINT: Avoid hassles with your USB connection and PC by flashing via the microSD card
Third party ROMs require a functioning and specific unlocking boot loader. Note what version is required for the ROM that you intend to boot into, or else you will face stuck staring at the boot screen.
No third party ROM include a functioning radio ROM. Note what radio is required for your chosen ROM. Radio 3.35.04 is required for those based off of the latest Sprint release.
via the microSD card flashing method (below), upgrade your Titan to the radio via the full Sprint 3.35.651.2 ROM (an executable archive, right click to extract the RUU_signed.nbh ROM file)
do NOT boot into the OS after flashing to this ROM.. After screen calibration Sprint customisations will run and alter your EPST settings to that operators settings.
Repeat the microSD flashing routine to flash to your chosen OS ROM.
I. OEMizer (optional)
Run OEMizer.exe from the kitchen's tool directory.
Complete your choices to customise your Titan's OS/Owner/Data/etc configurations
Hit the 'Create OEM' buttom for the customizations to be written into the kitche's OEM directory.
Build your ROM via the kitchen.
II. Kitchen
Run BuildNB.bat to execute BuildOS.
Hit the play button when you have selected your choices.
Exit BuildOS once it has completed.
Let the batch file complete its jobs.
quit the ROM Upgrade utility when it loads up and skip onto the following instructions on how to flash via the microSD card method.
OR follow through to finish the flash with the ROM Upgrade Utility via the USB.
III. PagePool Changer (optional)
Run PagePool Changer.exe
Select your ROM -- /RUU/RUU_signed.nbh
The default is 6 MB
The Titan has limited RAM so it isn't recommended to go beyond 8 MB
go smaller if you want more RAM free
Hit 'Close' when ready.
Flash your custom ROM.
IV. Flashing via the microSD card
With a card reader on your PC, format a microSD card into FAT32
From the kitchen's RUU directory, copy the ROM (RUU_signed.nbh) to the root of the microSD
Rename the ROM to TITAIMG.nbh
Insert your card.
Force into the boot loader with POWER-CAMERA-RESET
Follow the instructions and you'll quickly flash your Titan...
This will work to flash with an official ROM and radio, I think regardless of the boot loader you have installed. But ensure that you have the correct boot loader (olipro 2.40 for this ROM) installed for when you do eventually finish with your flashing and are ready to boot into the OS.
Can a mod sticky this?
If I missed anything at all, post the question and I'll modify the list to include that step.
Cheers on writing up a guide...but there are a few unnecessary steps in there...
First, there is no need to force the phone back into the bootloader after running the sprint update. Just let the phone boot up normally, wait for the tap the screen setup, and run the kitchen or RUU of your choosing. This will AUTOMATICALLY put the phone back into the bootloader and immediately begin to flash. There is no need to uncheck the usb setting in WMDC or activesync either.
gcincotta said:
Cheers on writing up a guide...but there are a few unnecessary steps in there...
First, there is no need to force the phone back into the bootloader after running the sprint update. Just let the phone boot up normally, wait for the tap the screen setup, and run the kitchen or RUU of your choosing. This will AUTOMATICALLY put the phone back into the bootloader and immediately begin to flash. There is no need to uncheck the usb setting in WMDC or activesync either.
Click to expand...
Click to collapse
Always helpful info. I just read on the forums how a few people did recommend doing that, and it always worked. Either way.
Plus, it can be much safer to get people familiar and accustomed to flashing via the microSD card way.
Knowing what an *.nbh file is and how to flash your device upon your own and without an extra utility are huge fundamentals to decreasing clls for help.
Most of the repeated troubled posts involve errors with the USB connection, installer utilities, unfamiliarity with a notable multi-coloured screen, switching between different boot loaders, etc... Here's a cut'n paste example from my kitchen's thread:
Easy installation:
HINT: Avoid hassles with your USB connection and PC by flashing via the microSD card
Third party ROMs require a functioning and specific unlocking boot loader. Note what version is required for the ROM that you intend to boot into, or else you will face stuck staring at the boot screen.
No third party ROM include a functioning radio ROM. Note what radio is required for your chosen ROM. Radio 3.35.04 is required for those based off of the latest Sprint release.
via the microSD card flashing method (below), upgrade your Titan to the radio via the full Sprint 3.35.651.2 ROM (an executable archive, right click to extract the RUU_signed.nbh ROM file)
do NOT boot into the OS after flashing to this ROM.. After screen calibration Sprint customisations will run and alter your EPST settings to that operators settings.
Repeat the microSD flashing routine to flash to your chosen OS ROM.
I. OEMizer (optional)
Run OEMizer.exe from the kitchen's tool directory.
Complete your choices to customise your Titan's OS/Owner/Data/etc configurations
Hit the 'Create OEM' buttom for the customizations to be written into the kitche's OEM directory.
Build your ROM via the kitchen.
II. Kitchen
Run BuildNB.bat to execute BuildOS.
Hit the play button when you have selected your choices.
Exit BuildOS once it has completed.
Let the batch file complete its jobs.
quit the ROM Upgrade utility when it loads up and skip onto the following instructions on how to flash via the microSD card method.
OR follow through to finish the flash with the ROM Upgrade Utility via the USB.
III. PagePool Changer (optional)
Run PagePool Changer.exe
Select your ROM -- /RUU/RUU_signed.nbh
The default is 6 MB
The Titan has limited RAM so it isn't recommended to go beyond 8 MB
go smaller if you want more RAM free
Hit 'Close' when ready.
Flash your custom ROM.
IV. Flashing via the microSD card
With a card reader on your PC, format a microSD card into FAT32
From the kitchen's RUU directory, copy the ROM (RUU_signed.nbh) to the root of the microSD
Rename the ROM to TITAIMG.nbh
Insert your card.
Force into the boot loader with POWER-CAMERA-RESET
Follow the instructions and you'll quickly flash your Titan...
This will work to flash with an official ROM and radio, I think regardless of the boot loader you have installed. But ensure that you have the correct boot loader (olipro 2.40 for this ROM) installed for when you do eventually finish with your flashing and are ready to boot into the OS.
Excellent stuff. I think it would be nice to have a centralized thread for installations.
they should also get their unlock code, msid, and msn and any other account/phone info before updating to a gps/rev. a radio as some people have lost it during the transition. they can view their info using ##778# on sprint phones ans they can use getspc to get their unlock code from their esn hex.
elgreek84 said:
they should also get their unlock code, msid, and msn and any other account/phone info before updating to a gps/rev. a radio as some people have lost it during the transition. they can view their info using ##778# on sprint phones ans they can use getspc to get their unlock code from their esn hex.
Click to expand...
Click to collapse
Aww, but that's just taking contingency preparedness too far......
Figures, I make a knowledgeable guide, and there are what.. at least 10 or 20 threads that keep asking the same quesitons over and over. Go figure.
Ironically I've never disabled the USB setting in Vista's (running 32-bit Ultimate) Sync Center and flashing still works fine.
subscribed
Fantastic guide. EvilDeadFan this is what i have been looking for. Especially with you being on Telus as i am. I have a couple small questions though. I have been reading for a couple weeks off and on and my issue is that most info is Sprint or Verizon specific so im left flapping on many of those carrier specific steps. In step 2 you recomend as pointed out by elgreek84 to backup the carrier required information. Now i know ##778# doesnt work on my phone but ##775# does and even when i get into the EPST it seems empty. Is this required on a Telus setup? I would think not as it was not part of your original steps. Is a reprogramming with Telus after its upgrade has completed required? possibly using *22803?
Also in step 3 to install the Olipro 2.40 i understand what to do but what results should i see? Should i soft reset so i can see the SPL that is installed? Sorry anal i know.
I really want to go ahead with this cause i seriously doubt Telus will ever get around to a proper update but im anal with things like this and have to know and be comfortable with every step.
So as a fellow Telus user how do you find DCD 3.0.1? Is it reliable and mostly glitch free? (Read about MMS issues, random reboots, BT issues still)
Also it seems there is a small spell-o on step 7 "I downloaded the Telus once since I'm on Telus." I think once should be one.
Thanks again stellar guide.
yonder711 said:
Fantastic guide. EvilDeadFan this is what i have been looking for. Especially with you being on Telus as i am. I have a couple small questions though. I have been reading for a couple weeks off and on and my issue is that most info is Sprint or Verizon specific so im left flapping on many of those carrier specific steps. In step 2 you recomend as pointed out by elgreek84 to backup the carrier required information. Now i know ##778# doesnt work on my phone but ##775# does and even when i get into the EPST it seems empty. Is this required on a Telus setup? I would think not as it was not part of your original steps. Is a reprogramming with Telus after its upgrade has completed required? possibly using *22803?
Also in step 3 to install the Olipro 2.40 i understand what to do but what results should i see? Should i soft reset so i can see the SPL that is installed? Sorry anal i know.
I really want to go ahead with this cause i seriously doubt Telus will ever get around to a proper update but im anal with things like this and have to know and be comfortable with every step.
So as a fellow Telus user how do you find DCD 3.0.1? Is it reliable and mostly glitch free? (Read about MMS issues, random reboots, BT issues still)
Also it seems there is a small spell-o on step 7 "I downloaded the Telus once since I'm on Telus." I think once should be one.
Thanks again stellar guide.
Click to expand...
Click to collapse
you only back this stuff up for safety or just incase you have a brain fart and go past the stylus setup
For us non sprint customers to get the radio or GPS Function we have to flash a rom to our Phone that was made for another carrier and they have different information in there ..... So IF you go past the stylus setup all of sprints information will over write all of our telus info causing our phones to not work as a communications device until we put all that stuff that we copied down in!
So as long as you do not go past the stylus setup you will not need that info!
For TELUS it is just "##778" not "##778#"
You only need to do this if your phone not able to send or receive calls or text MSG's or get a data connection
Great Rom, stable as hell, he has done a wonderful job on this rom. I haven't had any glitches lockups or malfunctions, I get all of my texts, emails, calls, alerts my callers hear me clearly and I hear them clearly.
This rom does what it was made for!
One thing that has not been an issue for me and it could be from some of the other settings in the REG that I’ve been messing with, is I have 3 all different high end model bluetooth ear pieces, all Pair to my phone but do not work!
Hey: EvilDeadFan good work man?/woman?
EvilDeadFan said:
Figures, I make a knowledgeable guide, and there are what.. at least 10 or 20 threads that keep asking the same quesitons over and over. Go figure.
Click to expand...
Click to collapse
The fact that the title of this thread is very vague probably doesn't help =(
Otherwise, great work it helped me out a lot!
paravis said:
The fact that the title of this thread is very vague probably doesn't help =(
Otherwise, great work it helped me out a lot!
Click to expand...
Click to collapse
How is "ULTIMATE INSTALLATION GUIDE" vague?
I agree that there should be more sticky's but this thread is generally commented on all the time, so it should be active when you log in.
serfboreds said:
I agree that there should be more sticky's but this thread is generally commented on all the time, so it should be active when you log in.
Click to expand...
Click to collapse
The Wiki is the best place for these guides. Each level or revision of this software requires its own installation process described. I have been trying to keep the Wiki updated and invite others to help. That way we can keep the number of "Best" installation guides minimized and focused on the ROMs they pertain to. Maybe we can get the noobs to read it first, too.
The Wiki should be a great resource for all. Ok, I'll get off my soapbox, but DCD made me do it.
rschell said:
The Wiki should be a great resource for all. Ok, I'll get off my soapbox, but DCD made me do it.
Click to expand...
Click to collapse
You needed to push it.
I just made some small additions for recording EPST data, editing it, and flashing via the microSD method.
queston
ok so I already had the newest sprint update on my phone(6800) and then I downloaded bootloader and loaded it and it was in bootloader screen and then I ran dcds 3.01, everything seems to be working right and running good, is there anything that can be affected by doing it this way? thanks in advance to any input
so doing these upgrades usually doesn't erase all the info in #778 right?
PS thanks for this guide. this is probably the most simple guide i've seen.
Makes it really easy looking. i've flashed my 6700 a few times, but
never had to upgrade the radio and unlock something before...
so I really appreciate this post having simple info with links.
hey all, I will be recieving my p4000 in a week, and I want to know if what I am thinking of doing will actually work, and greatly simplify the upgrade process for my. With my vogue I do all flashing from sd, and I want to do the same with the titan, so here is what I am hoping will work:
1. use dutty's nbh tool to extract radio from sprint update
-I assume it is the 785.nb, can anyone confirm this?
2. use winzip to extract hard-spl-mfg, and inside is olipro-2.40-hard.nb
3. create custom rom using ppckitchens 3.35 selections
4. use dutty's nbh tool to extract .nb's from custom rom
5. use dutty's nbh tool again to package up
-785.nb as radio
-olipro-2.40-hard.nb as spl
-use mainsplash, secondarysplash, and windows.nb from custom rom
Once packaged, will I be able to flash this all in one shot, or does the device have to be unlocked seperately, and then flashed with an nbh without spl?
...
serfboreds said:
How is "ULTIMATE INSTALLATION GUIDE" vague?
I agree that there should be more sticky's but this thread is generally commented on all the time, so it should be active when you log in.
Click to expand...
Click to collapse
How is it not?
Pretend you had not idea what was in this thread, and were just looking at the title. "ULTIMATE INSTALLATION GUIDE" What does that tell you? Here's a list of conclusions that can be drawn from that title, off the top of my head and obviously from my own tech background.
1. An installation guide for installing Windows Vista Ultimate.. obviously not likely as this is not an appropriate forum for that... HOWEVER
2. "" "" "" "" with the necessary components needed to properly sync, and be able to perform titan flashes correctly. Makes sense as many, like myself, have had troubles both syncing / getting usb connectivity, and / or being able to perform flashes in Vista.
Vista possiblities end -
3. Okay, its an installation guide.
First off, from my experience and observations in these forums and among the HTC mod communities, applying a new radio, or rom to a phone, is not usually referred to as "installing". Rather, the more prevelant term is "flashing" a new rom, or a new radio.
Secondly, I think it's obvious to anyone, that the topic, does not mention anywhere, as to what is going to be installed in this guide. Big clue to its apparent vagueness, and the easiest one
One could gather from the topic that it could be an installation guide for getting the new bootloader onto your phone.
And / or an installation of a custom rom... called "ultimate"?
Installation guide for installing DCDs kitchen, or perhaps just one of his roms.
"" "" "" the ppcgeeks official titan kitchen, using no2chem 5054 (or 5060)
You getting the picture now ?
It is very vague. And when I mentioned that, it was not a complaint... rather a friendly suggestion that the topic title should be changed to accurately reflect the content of this guide. Thus, helping to attract more users who are needing help with this because they can see by the thread title, that inside is something that could help them out in a big way.
Just trying to get this out there more for those who could use it.
This is a guide on how to flash a new ROM to your HTC 7 Mozart, without using Goldcard. This method can be used to update your ROM or to debrand your phone.
This method was outlined here by theintelligent. I've also used info from here by alalai. I take no credit for discovering this, but thought it deserved a pinned topic to help stop the multiple "how do I flash" topics and to make it easier for users to find the information.
Before you start
This WILL debrand your phone (remove network customisations) and it will enable you to receive updates as soon as Microsoft release them (rather than waiting for the operators).
It WILL NOT unlock your device (to allow you to use other network's SIMs). You will need to use a commercial service for this.
You WILL be able to update your phone to NoDo (and later leaked versions when they appear).
Preparation
I'm not sure why, I think it may be due to getting the right drivers installed, but you will need to install one of the following:
Windows XP users:
Install Microsoft ActiveSync .
Windows Vista/7 users:
Install Windows Mobile Device Center - make sure you install the right version 32/64bit depending upon your OS version.
Ensure that your phone's battery has at least 50% charge.
Download and flash your ROMs
Yes, I said ROMs - if you want to debrand your phone, you will need to download two sets of ROMs. If you're just updating and not debranding then you'll just need to download one ROM.
Download a ROM which is by the same network as you're on (for example if you're phone is currently locked to Orange UK then download RUU_Mozart_Orange_UK_1.22.061.10_Radio_5.50.09.18_ 22.24.50.09U, by ansar. - do not download 1.30!).
Open up ActiveSync/Mobile Device Center
Flash this ROM to your phone (you may not need to do this step, but most users will).
Turn your phone off.
Put your phone into Bootloader Mode - this can be done by pressing and holding the Volume Down Key & Power Button.
Plug your phone into your PC, hopefully a HTC USB driver will install.
Once the driver is installed your phone should display USB mode.
Extract the zip file and then run the exe file
Run through the update process
When your ROM is flashed, your phone will want you to customise it - just do the basic stuff.
Download the ROM you would like to flash (e.g. RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33 b.50_RELEASE).
Extract the unbranded ROM zip file and then extract the exe file (WinZip will not do this - try 7zip or similar).
Copy the RUU_signed.nbh from the unbranded ROM
Extract the branded ROM exe
Paste the RUU_signed.nbh from the unbranded ROM to branded ROM
Plug your phone back into the PC in bootloader mode
Run RomUpdateUtility.exe file from the branded ROM (but with the unbranded RUU_signed.nbh file)
Follow the steps...
Et voila, you'll have (if all goes well) and unbranded ROM installed
Last step, plug your phone back into your PC and run Zune. Your phone should receive the latest cumulative update.
Let me know if anything isn't clear or needs updating. I am not going to list all ROMs, but there are a plethora of them available here.
Casey
thanks so much for this. i will try asap if my asia unbranded mozart will be flashed.
edit: question if i dont want to unbrand my mozart coz it already unbranded asia will i flash the htc_europe rom only? pls enlighten mo. ima little confused. =)
trixnix said:
edit: question if i dont want to unbrand my mozart coz it already unbranded asia will i flash the htc_europe rom only? pls enlighten mo. ima little confused. =)
Click to expand...
Click to collapse
Yes, if you're sure it's unbranded, then you can flash any ROM you like. Just make sure there's no difference between Asian and European models (I honestly don't know either way).
Casey
This is probably a stupid question but, after debranding can you still install operator specific apps (such as Orange UK's 'Your Orange' app) from the Marketplace?
Omega Point said:
This is probably a stupid question but, after debranding can you still install operator specific apps (such as Orange UK's 'Your Orange' app) from the Marketplace?
Click to expand...
Click to collapse
yes u can if u find it on the marketplace
they are apps like others
i am from algeria.
after a sucessfull flash, pin code requested.
is there a solution?
did you have the phone pin locked before you did the update? otherwise the default is usually 0000
i try to flash my asian version Mozart,
when i open the ROMUpdateUtility after it starts,
the Windows Mobile Device Center will automatically close, is that normal?
i flashed "RUU_Mozart_hTC_Asia_WWE_1.26.707.01_Radio_5.51.09.06_22.30.50.09U_by_ansar" first
And i paste the RUU_signed.nbh of "RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50_RELEASE" and flashed it.
the RUU always show invaild vender
thx u
alljerry04 said:
i flashed "RUU_Mozart_hTC_Asia_WWE_1.26.707.01_Radio_5.51.09.06_22.30.50.09U_by_ansar" first
And i paste the RUU_signed.nbh of "RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50_RELEASE" and flashed it.
the RUU always show invaild vender
Click to expand...
Click to collapse
I'm not sure if you can cross regions - I haven't tried it - someone else here may know. Maybe try another ROM.
Hi,
Great post.
If you going to flash via the bootloader then AS or WMDC do not need to be running.
Before attempting to flash a device ensure the battery has a charge of more than 50%
It is always good practise to perform another hard reset after flashing a ROM.
alljerry04 said:
i try to flash my asian version Mozart,
i flashed "RUU_Mozart_hTC_Asia_WWE_1.26.707.01_Radio_5.51.09.06_22.30.50.09U_by_ansar" first
And i paste the RUU_signed.nbh of "RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50_RELEASE" and flashed it.
the RUU always show invaild vender
thx u
Click to expand...
Click to collapse
Casey_boy said:
I'm not sure if you can cross regions - I haven't tried it - someone else here may know. Maybe try another ROM.
Click to expand...
Click to collapse
Hi,
I think you will need to create a goldcard and purchase a cable (new days) or even HARD-SPL or CID (old days) to unlock your device if you want to flash ROMS from different regions, when the option becomes available for the Mozart. (if ever).
Random Apps
I downloaded and installed the rom for the unbranded mozart for europe and HATE the fact you can't select the uk keyboard... So I installed the original orange one from ansaar but it has these silly apps that I can't uninstall... anyone know how to get rid?
As the ROM is branded then you cannot get rid of the carriers customisation, as for the keyboard, this is really no big deal, the £ key can still be used, and its not as if its a full qwerty anyway.
I have a UK Orange Mozart (Sim Locked) and unbranded to the Euro 1.28 using this method. When I connected to Zune it immediately wanted to upgrade the OS to the Pre-NoDo update but it refuses to see NoDo.
However there are reports of people flashing unbranded 7389 OS builds successfully getting the Official NoDo via Zune who are also in the UK so it's very unclear how MS are "Delivering" the updates. What do Microsoft really mean by "Open Market" ?
What isn't clear is if the unbranded phones were also sim unlocked.
Infuriated-Germ said:
I have a UK Orange Mozart (Sim Locked) and unbranded to the Euro 1.28 using this method. When I connected to Zune it immediately wanted to upgrade the OS to the Pre-NoDo update but it refuses to see NoDo.
However there are reports of people flashing unbranded 7389 OS builds successfully getting the Official NoDo via Zune who are also in the UK so it's very unclear how MS are "Delivering" the updates. What do Microsoft really mean by "Open Market" ?
What isn't clear is if the unbranded phones were also sim unlocked.
Click to expand...
Click to collapse
I wrote this guide after flashing my girlfriend's Mozart (which was OrangeUK branded) to Euro 1.30 which was OS v7389 and as soon as the 7390NoDo update was released she was asked to update.
So, yes, I'm unsure. Perhaps they are going by OS version. But if you want NoDo, then flash 7389 (which is essentially NoDo anyway) and then you'll get updated to 7390.
Casey
hd2leo_fusion said:
yes u can if u find it on the marketplace
they are apps like others
Click to expand...
Click to collapse
Do you have to reinstall all your applications??
Mogreen said:
Do you have to reinstall all your applications??
Click to expand...
Click to collapse
Yep. This completely reformats your phone - it's not the same as the update process. You'll lose everything - so backup your data with Zune.
That being said, you can just re-download your apps (even your paid apps).
Casey
Worked perfectly, thanks so much!
Casey_boy said:
[*]Download a ROM which is by the same network as you're on (for example if you're phone is currently locked to Orange UK then download RUU_Mozart_Orange_UK_1.22.061.10_Radio_5.50.09.18_ 22.24.50.09U, by ansar. - do not download 1.30!).
[*]Open up ActiveSync/Mobile Device Center
[*]Flash this ROM to your phone (you may not need to do this step, but most users will).
Turn your phone off.
Put your phone into Bootloader Mode - this can be done by pressing and holding the Volume Down Key + Power Button.
Plug your phone into your PC, hopefully a HTC USB driver will install.
Once the driver is installed your phone should display USB mode.
Extract the zip file and then run the exe file
Click to expand...
Click to collapse
Hopefully no-one minds me registering to ask for advice on de-branding. I have a question about the part of the procedure above where the branded ROM is first flashed. The version for my phone is here:
http://forum.xda-developers.com/showthread.php?t=1007277
But, when I unzip that, there's no complete .exe as it's already been extracted. The unbranded ROM is an .exe which I had to extract with 7zip, though. So, what .exe should I run for the initial flash with the branded ROM (e.g. RomUpdateUtility, EnterBootloader, something else etc.)? Thanks.
knirirr said:
But, when I unzip that, there's no complete .exe as it's already been extracted. The unbranded ROM is an .exe which I had to extract with 7zip, though. So, what .exe should I run for the initial flash with the branded ROM (e.g. RomUpdateUtility, EnterBootloader, something else etc.)? Thanks.
Click to expand...
Click to collapse
Run the ROMUpdateUtility executable
Casey
Hi all,
So got my Mozart today. I want to get 7720 onto my device (preferably unlocked)... Although I am having quite a big problem - Zune says my phone is upto date. It is not a branded phone.
I found this ROM: http://forum.xda-developers.com/showthread.php?t=1206853
Which is a NoDo ROM which allows you to get the other prerequisite updates needed for 7720 though Zune.
Although as far as I understand you need to have RSPL/HSPL on your phone.
So went and found this thread: http://forum.xda-developers.com/showthread.php?p=16189671#post16189671
So all is good, I am on my way to getting somewhere (after I dunno how many hours) until I get to this..
WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
It will damage your device. Not a joke.
Click to expand...
Click to collapse
I do not understand what is meant by "Mozart 4.XX" and what they mean by RUU ROMS with Mango? Would I have a problem loading RSPL (Yes, I am being relatively cautious - just got the phone and cannot afford to brick it or something), putting the ROM on (The one I linked to above) and then updating to 7720?
Also one thing which is a bit weird is in the RSPL/HSPL thread there is the following:
List of supported MIDs:
Gold: “PC92****”, “PC921000”
Mozart: “MOZA1000”, “PD67****”, “PD671000”, “PD671200”
Mondrian: “PD26****”, “PD261000”, “PD261100”
Spark: “PC401000”
Schubert: “PD29****”, “PD291000”, “PD291100”, "PD291300", "PD291500"
Click to expand...
Click to collapse
My Mozart's MID is PD67100 - there is one less 0 in my MID... Does that make a difference?
I do not have 10 posts so cannot post in the RSPL/HSPL thread as its in the Development section. A friend of mine has a Mozart, got it a week before me from the same place, and he has 7720 on his and 7004 sucks compared to 7720. It is hardly functional
So if any of you can help me out I would really appreciate it!
Thanks
same problem my MIDs not yet supported by the DFT team HSPLs
same problem as you, I can not install a HSPLs, because my MID="MOZA100" there is one less 0 in my MID too , it's not yet supported by the DFT team HSPLs
(List of supported Mozart MIDs: “MOZA1000”, “PD67****”, “PD671000”, “PD671200”)
but I try anyway:
1 - Launching RSPL (it reboot and see RSPLX.YZ and "CotullaRSPL" on the screen - the task done!)
2- Installing HSPL (it seems to be successful until the end, but when I boot into bootloader sees me as no modifications are made)
http://forum.xda-developers.com/showthread.php?t=1227070
Hey, so you tried it on your Mozart which has an unsupported MID - one less zero and the RSPL worked for you? If I can get RSPL or HSPL working would me flashing my phone with the ROM I linked to work and then from there updating to Mango?
Is there anyway I could brick my device by trying? I still don't know what they meant by don't try it on "4.xx"?
EDIT: Also what if you were to try flash your WP7 device with a custom ROM and you do NOT have RSPL/HSPL on your phone?
Thanks
Tigros, I went and re-read the RSPL/HSPL thread and I think we skipped through it a bit too fast.
I noticed this:
!Please note that on SPL screen MID is only 7 symbols, without last one.!
Programs stops any operations if unknown MID detected. If your device have unknown MID, please report about it in this thread. Specify your MID, device name, ROM versions. It’s nice, if you can give a link to download ROM.
Click to expand...
Click to collapse
So the SPL will only be 7 digits long in the SPL and not 8 as displayed in the thread and if our MID was not supported then it would not let us put RSPL/HSPL on.
Also the DFT_XSPL_WP7FG1.rar download is corrupt for me. I have tried downloading it multiple times. I am assuming your version is not corrupt, could you please upload it for me?
Thanks
EDIT: Ok, so forget about what I said about needing G1, just downloaded Revision #2 and installed RSPL, then HSPL (did not realise you had to have HSPL, got it now though). FLashed with the custom ROM I linked to and now just need to try keep my device unlocked while updating to 7403.
Going to try unlocking it first and then following ansar's guide. See if that works as doing what he said did not work for me :-/
~sigh~
So after updating to 7403, Zune does not detect any updates so I think I will be waiting for a Mango custom ROM
Also my market place has never really worked? Really annoying. South Africa is supported as far as I know.
you must install the new beta zune 4.8. then your phone will be detected. the version can you find in the forum or at google.
The most important first is the fact of installing hspls (RSPL launch is a step for installing hspls no more)
while hspls is not installed you can not install other ROM
because the original SPL and Does not allow to flash custom ROM.
I tried following Ansar guide, but it does not work no more
ahlMAR said:
you must install the new beta zune 4.8. then your phone will be detected. the version can you find in the forum or at google.
Click to expand...
Click to collapse
I was running 4.8 (dunno which build exactly) although now Zune is completely screwed as I uninstalled it to install 4.7 to use Phone Backup to make a backup of my upgrading progress. Zune uninstalled, although it still thinks that it is installed so I cannot install any version of Zune as it says it is already up to date yet there is no version of Zune on my PC at all.
So I am going to try and post on the Zune forum, see if someone can help me otherwise I may have to format again - not amped to as I just formated last weekend.
ahlMAR, which exact version of Zune will give me the update for 7712 (I think that is what comes after 7403?)...
Hi,
I recently updated my Mozart to Mango via the beta invitation.
The reason being that I was unable to force the Mango update via Zune and was not included in the first update wave.
So I activated the beta invitation that I had received several months ago (I'm a registered developer) and set up a PC with the old beta versions to flash my Mozart.
After going through all the updates (I was on 7392) including ISV, I am now on 7720.
However, my phone did NOT update the firmware.
I am therefore currently stuck with:
Firmware revision number: 2250.09.12803.111
Radio software version: 5.52.09.16_22.33a.50.10U
Bootloader version: 1.28.2250.3(113810)
But my OS version is: 7.10.7720.68
Do you know of any way to get the new firmware revision and the new radio software? (I would like to keep my data on the phone and would therefore be happy, if I don't have to reflash a Mango-rom that has these updates included)
Thank you very much in advance
Best regards,
FrozenLord
little info
The only words I can say is that after offical update (free phone in france,)
figures are:
Firmware : 22.50.21.40.600.401
Radio: 5.69.09.05a_2250_50_50_21U
spl; 4.6.2250.0 129193
i have the same later radio and firmware version numbers as well, after tricking the update with the Zune and Local Area Connection disable method.
Hi,
I do know that you receive these updates when updating via the regular way (even if it's tricked).
Unfortunately, this way was not possible for me - for a reason I don't know.
So I used the approach I explained above and am NOT able to do the regular update.
Does anybody know of any way to update these components separately?
Best regards,
FrozenLord
I updated my wife's Mozart to Mango 7720 via the 'leaked' MS employee release. Her phone still had the original firmware after the Mango update like yours. I was beginning to anticipate having to reflash her phone with the Stock ROM when two days ago she got a message of an update in Zune. Sure enough it was an HTC update that brought the firmware up-to-date, the same as mine updated via the public release. You just may need to wait a bit longer.
Sent from my T8697 using XDA Windows Phone 7 App
Hi,
I have the same problem. My carrier is also t-mobile germany. Maybe it is a problem from them??? If you find a way to tricker the firmware update. please let me know.
I finally found a way
Hi there
After a lot of fiddling around, I have finally found a way to upgrade the radio rom without losing the private data.
You will need at least the following applications:
- A modified RUU so the flash is not erased after the update (which is a standard procedure in the standard RUU, so use the modified one and ignore the HD7-part - it works!) http://forum.xda-developers.com/showthread.php?t=1204733
- The actual radio update (5.71.09.02a from the HTC Mozart Europe ROM) https://rapidshare.com/files/1216711649/RUU_unsigned.nbh
Now, before you start doing anything that you might regret or wonder about later, I suggest that you read the complete post
I've tried to explain all the pieces and posted my experience too.
Just for security (better safe than sorry!), you should create a complete backup of your phone to fall back to if anything goes wrong.
A great tool is provided here: http://forum.xda-developers.com/showthread.php?p=14258464#post14258464
Now for the instructions
I am not responsible for your actions or any consequences that are caused by this mod! You do all this on your own and can hold no one responsible but yourself!
Download both files and extract them into the same folder.
Reboot your phone and keep the VOLUME DOWN button pressed, while turning it on
You should see the SPL-screen (a strangely colored screen like this one: http://forum.xda-developers.com/showpost.php?p=16189686&postcount=3)
Connect the phone via USB to your PC
(Windows should install a driver - if not, install Windows Mobile Device Center if you're on Windows Vista/7)
Fire up the modified RUU and click through
You should be ready to go
By the way:
I almost killed my phone in the testing procedure because I created an invalid nbh (had no idea what I did and started fiddling without tutorials ), which seemed to have killed parts of my SPL...
The process was easily fixed (fortunately) by applying the HSPL by DFT, which fixed the problem (which was that my phone always booted back into the SPL-screen, unable to boot into WP7).
But since that moment, I've got HSPL installed.
So if the above procedure does not work for any reason, install HSPL and try again
HSPL can be found here: http://forum.xda-developers.com/showthread.php?t=1195647
Also, I updated the ROM using a standard RUU and found out about the FLASH-format after applying the update the hard way (resulting in a totally clean mobile...).
Fortunately, I had created a complete backup before and was easily able to restore it via the same application.
Should you happen to run a normal RUU for who-knows-what-reason, just restore the update. (the radio rom is NOT downgraded in the restoring process, so you're good to go, even if you chose the wrong RUU)
Just out of curiosity (and knowing that I had a backup to fall back to) I reran the update process using the modified RUU (see link above) and the flashing went fine - and the phone did not format itself afterwards
Therefore: Ignore the HD7 in the name, it works for the HTC 7 Mozart too.
I used this tool to extract the Radio-rom (and the including customisation) and repacked it using the same tool: http://forum.xda-developers.com/showthread.php?t=1260757
Thanks a lot, ted973 for providing it
Additionally, I am glad that DFT had released the HSPL for my phone, else I would have had a problem
Thanks a lot guys!
Now have fun with the updated radio and feel free to comment
My versions are now:
OS version: 7.10.7720.68
Firmware revision number: 2250.09.12803.111 (unchanged to before)
Radio software version: 5.71.09.02a_22.51.50.21U
Bootloader version: 1.32.2250.1(119496) which is because of the DFT HSPL
Best regards,
FrozenLord
@ FrozenLord
did you debranded your mozart or did you have an unbranded device in the first place ?
i'd like to figure out a way to get the latest radio on a debranded mozart. seems like zune doesn't update the bootloader and radio on a debranded device.
I've got a T-Mobile branding.
But the procedure should work for an unbranded mobile as well
thanks a lot. will try to get my debranded phone to the normal update route with your tip.
Hi all
I've bought a new HTC Radar with the stock 7.10.7720 rom, and after seeing that it didn't ask me to update throughout the first day of use, I went ahead and did the following things:
1) flashed the latest .nbh found here http://forum.xda-developers.com/wiki/HTC_Radar/Shipped_Roms (the latest Europe one) with the titan advanced ruu (os version 7740)
2) used cab sender to upgrade to the latest 8107 build with the correct language packs.
Doing the 2nd step, i mistakenly left the 7740 cab upgrade in the folder along with the 8107 cab (as I was originally thinking to cab-send directly from stock rom).
Anyway, the upgrade succeeded and the phone works fine, and now tells me that there's an update available, even if I have the latest version (the build numbers shown in the settings are correct).
What could it be? Another version released just today? I fear it will brick my phone or mess around with versions...
Thank you in advance
Bye