pastebin<dot>com/KSv3Wn7v any one have any clue what i did here? because short of sayng the roms bad (doubt it, afaik there are other people running it.) im out of ideas. during all of this the phone is doing its best impression of a brick.
sorry for the URL hinky-ness, long time lurker, first time poster.
keastes said:
pastebin<dot>com/KSv3Wn7v any one have any clue what i did here? because short of sayng the roms bad (doubt it, afaik there are other people running it.) im out of ideas. during all of this the phone is doing its best impression of a brick.
sorry for the URL hinky-ness, long time lurker, first time poster.
Click to expand...
Click to collapse
Flash only to rom-slot 1... anything else will cause el-bricko
asuhoops8628 said:
Flash only to rom-slot 1... anything else will cause el-bricko
Click to expand...
Click to collapse
it is in slot one, http://forum.xda-developers.com/showthread.php?t=2028020 followed all the instructions, installed safestrap, verified MD5 of the rom, etc.
if you are on ICS, make sure you are downloading and flashing ICS Kernel only one. if not use the other?
I had to delete and re-create the Rom Slot, then it was ok. I skipped installing GApps for the 1st boot, then went back to do them.
Ok sorry its taken so long for me to reply, turns out i needed the ICS kernel. Wow i feel like an idiot.
Sent from my DROID RAZR using xda app-developers app
You can't go back to the ICS kernel, right? And by installing the leaked VZW OTA JB that puts me permanently on the JB kernel?
MyNameIsJeff said:
You can't go back to the ICS kernel, right? And by installing the leaked VZW OTA JB that puts me permanently on the JB kernel?
Click to expand...
Click to collapse
i never left the ICS kernal, because of how this rom gets installed (check the thread i linked) i have the stock verizon ICS installed, and cyanogenmod 10.1 (android 4.2 jelly bean) i can freely switch back and forth.
to answer your second question, as far as i know, no one has yet found a fastboot image for the stock ICS or gingerbread, so you are SOL with returning.
I just installed the build for the JB kernel posted today; http://goo.im/devs/Hashcode/spyder/cm10.1
It seems so smooth! But the camera still FCs, and gallery complains that there's no external storage attached. I should add that after restarting, it took a moment for it so see that I indeed had a sim card installed.
I installed the latest JB kernel release, and the camera is still force closing, citing "Gallery has stopped." So while the camera and gallery don't work, I can still use "QuickPic" to look at gallery itesm like my pictures.. and uh.. porn. (Yes yo do!)
I'm having the same issues. Installed CM10.1 nightly today, with up todate gapps, install went smoothly as did setup. However, now that I'm trying to set up the phone (i.e. restoring apps from titanium) it shows that ext sd is not mounted. Same issues of gallery saying "No external storage available" and camera FCing due to gallery stopping.
I feel theres something I should be doing to my SD but not sure what.
Also, I'm running Jellywiz on another slot, as my daily driver before I can set thsi up, but am worried if i start messing with the SD, it might affect that ROM.
Has anyone found a way to resolve the ext SD issue?
Related
I had used the amaze 4g all in one tool kit to unlock my bootloader, install a custom recovery, and then installed a custom rom (bullet proof 2.5) along with the provided kernel to go with it.
The phone worked great for a few days, then I noticed that it was acting like the wireless network radios were turned off in the software. They were still enabled so I rebooted and it fixed the problem for a little while.
Now my phone will only give me the com.android.phone has stopped working error and will not let me turn on the wireless network radios.
I have tried complete wipe of the phone and re-installation of the custom rom. I have tried different, yet still recommend, custom kernels, as well as different recoveries all with the same issue.
Any help would be greatly appreciated. I tried searching with out any good results.
Thanks.
Are you a Tmobile user?
Double0EK said:
Are you a Tmobile user?
Click to expand...
Click to collapse
Yeah. Even tried a new simcard even though I didnt think it would do any good.
toyoter91 said:
I had used the amaze 4g all in one tool kit to unlock my bootloader, install a custom recovery, and then installed a custom rom (bullet proof 2.5) along with the provided kernel to go with it.
The phone worked great for a few days, then I noticed that it was acting like the wireless network radios were turned off in the software. They were still enabled so I rebooted and it fixed the problem for a little while.
Now my phone will only give me the com.android.phone has stopped working error and will not let me turn on the wireless network radios.
I have tried complete wipe of the phone and re-installation of the custom rom. I have tried different, yet still recommend, custom kernels, as well as different recoveries all with the same issue.
Any help would be greatly appreciated. I tried searching with out any good results.
Thanks.
Click to expand...
Click to collapse
are you running joes "one good rom"? dude it says right in the op
Attention 2: on the first start "com.android.phone" process will FC, it is normal.
It's because of Toggle2G app. Just open that app and give it permission to run.
mrmako777 said:
are you running joes "one good rom"? dude it says right in the op
Attention 2: on the first start "com.android.phone" process will FC, it is normal.
It's because of Toggle2G app. Just open that app and give it permission to run.
Click to expand...
Click to collapse
I actually stated in my first post what rom I was running when all this happened.
I have tried Joes "one good rom" and followed all his kernel and set up instructions with no luck. On his rom I don't get the error message, but all of the wireless network options are grayed out. I am starting to think it might be something hardware.
toyoter91 said:
I actually stated in my first post what rom I was running when all this happened.
I have tried Joes "one good rom" and followed all his kernel and set up instructions with no luck. On his rom I don't get the error message, but all of the wireless network options are grayed out. I am starting to think it might be something hardware.
Click to expand...
Click to collapse
doh! shame on me for not seeing that i would say if worse comes to worse, reflash the stock rom and see if youre up and running. if its still not working, then id say maybe send it in for warranty
mrmako777 said:
doh! shame on me for not seeing that i would say if worse comes to worse, reflash the stock rom and see if youre up and running. if its still not working, then id say maybe send it in for warranty
Click to expand...
Click to collapse
No worries. I am actually in the process of finding and flashing the stock rom back onto it, going to try and put everything back to stock and see what happens.
Having a similar problem
toyoter91 said:
No worries. I am actually in the process of finding and flashing the stock rom back onto it, going to try and put everything back to stock and see what happens.
Click to expand...
Click to collapse
Hi. I decided to add to this thread instead of starting a new one since i am having a similar problem. The originator never said if he was able to solve the problem. I was using the Energy ROM (http://forum.xda-developers.com/showthread.php?t=1362759) (ICS, S-ON) and everything was fine. I decided to try the Speed ROM (project "butter" http://forum.xda-developers.com/showthread.php?t=1623184) which is Jellybean based. I did a full wipe, and after installing it I got the same com.android.phone error. I got it to stop, but then started having other issues like Superuser, BusyBox, and Titanium Backup unable to get root access. Unable to find any other solutions, I decided to restore to stock, which went fine (well I had to try a few times as I haven't done it before). After that, and having the phone working fine back at stock ICS I reflashed the Speed ROM. I ended up with the same issue. I wiped again and returned to the Energy ROM and it seems to be working fine. My quesiton is, why is the Speed ROM not working on my phone? When it flashed there were no issues, and I followed the instrucitons exactly.
I would post in the Speed ROM forum but I don't have enough posts yet since I am usually able to find answers by searching.
BillyD325 said:
Hi. I decided to add to this thread instead of starting a new one since i am having a similar problem. The originator never said if he was able to solve the problem. I was using the Energy ROM (http://forum.xda-developers.com/showthread.php?t=1362759) (ICS, S-ON) and everything was fine. I decided to try the Speed ROM (project "butter" http://forum.xda-developers.com/showthread.php?t=1623184) which is Jellybean based. I did a full wipe, and after installing it I got the same com.android.phone error. I got it to stop, but then started having other issues like Superuser, BusyBox, and Titanium Backup unable to get root access. Unable to find any other solutions, I decided to restore to stock, which went fine (well I had to try a few times as I haven't done it before). After that, and having the phone working fine back at stock ICS I reflashed the Speed ROM. I ended up with the same issue. I wiped again and returned to the Energy ROM and it seems to be working fine. My quesiton is, why is the Speed ROM not working on my phone? When it flashed there were no issues, and I followed the instrucitons exactly.
I would post in the Speed ROM forum but I don't have enough posts yet since I am usually able to find answers by searching.
Click to expand...
Click to collapse
That's a common problem with SpeedRom and some other as well. Re-flash the SpeedRom, after it boot-up, go to Google Play store and download SuperSU -not Superuser -, open SuperSU and update binary. After that you can install busy box and run Titanium ....
antiquezip said:
That's a common problem with SpeedRom and some other as well. Re-flash the SpeedRom, after it boot-up, go to Google Play store and download SuperSU -not Superuser -, open SuperSU and update binary. After that you can install busy box and run Titanium ....
Click to expand...
Click to collapse
Thank you! After I posted I ran across somehting in the speed rom thread that made me go back to the original post. Sure enough, there is a download link for SuperSU which it says you need to flash to gain root after installng the ROM. I guess I read the instructions above, scrolled down to the rom download link, and then stopped. I will try this again with what you suggested when I have time in the next day or two.
BillyD325 said:
Thank you! After I posted I ran across somehting in the speed rom thread that made me go back to the original post. Sure enough, there is a download link for SuperSU which it says you need to flash to gain root after installng the ROM. I guess I read the instructions above, scrolled down to the rom download link, and then stopped. I will try this again with what you suggested when I have time in the next day or two.
Click to expand...
Click to collapse
I had this error factory reset stop the error.
This belongs in Q&A.
Thread Moved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
Hi, it has been awhile since I have posted but I have been reading the forums and trying to keep up with things on my 3D. I have since un-rooted my 3D and have returned it to latest stock OTA updates. I did this because I was planning on maybe going to the next greatest phone
My question is pretty simple and involves the process of updating to the ICS when it becomes available...hopefully soon from what I am hearing. Anyways, Would it be best if I deleted any programs I have installed from the play store now? I mean just in case there are conflicts? Or should the update delete them and not reinstall them?
Please be kind...LOL!!!
If you want to update to ICS right now, by using the unofficial leaks, you'll have to re-root and install it that way. This would wipe all data on the phone when installing the new rom. No need to remove apps or data now or anything, but it's always a good idea to back up things you want to keep, just for safe keeping.
If you want to wait for the official ICS, I'm fairly certain that it will also wipe all data and apps on your phone, as it'll need to install a new firmware, which wipes all data on the phone.
No need to remove any apps and such before updating, as they'll automatically get removed anyways.
When you update, you can just install the apps again.
- Moon
Thanks Moon for the reply to this weak at best question...LOL!!! I can just remember at one time when I was flashing and stuff, that the user installed stuff just re-downloaded and installed on its own. I can;t remember if there was an opt out for that or not. I was just curious and like I said a pretty weak question but a great response. Thanks
Also note, if you use the unofficial ICS that everyone is basing their ROM's off of, you won't be able to go back to GB. you are stuck on ICS, but you can flash other ICS roms, just can't go back to Gingerbread.
felacio said:
Also note, if you use the unofficial ICS that everyone is basing their ROM's off of, you won't be able to go back to GB. you are stuck on ICS, but you can flash other ICS roms, just can't go back to Gingerbread.
Click to expand...
Click to collapse
Odd, because if you have the GSM 3D model then you can go back to gingerbread no problems. Even with the firmware update.
scariola said:
Odd, because if you have the GSM 3D model then you can go back to gingerbread no problems. Even with the firmware update.
Click to expand...
Click to collapse
+ 1 i nand back to 3.0 from time to time, no issue
felacio said:
Also note, if you use the unofficial ICS that everyone is basing their ROM's off of, you won't be able to go back to GB. you are stuck on ICS, but you can flash other ICS roms, just can't go back to Gingerbread.
Click to expand...
Click to collapse
Never heard of this on CDMA either. Maybe if you updated your firmware to the new Virgin Mobile one, but even then,I think you can downgrade to GB.
Sent from my ICS 3VO with Tapatalk 2
If you want to wait for the official ICS, I'm fairly certain that it will also wipe all data and apps on your phone, as it'll need to install a new firmware, which wipes all data on the phone.
Click to expand...
Click to collapse
I've never seen an OTA update wipe everything on the phone.
sitlet said:
I've never seen an OTA update wipe everything on the phone.
Click to expand...
Click to collapse
This has been my experience with OTA's as well. It seems that the user installed programs would automatically re-install and like I said there was an opt out at one time but I was not sure that it still existed.
I have a few odd ball programs mostly to do with fishing and stuff, like fishing status etc. and If I see or read that ICS is in fact ready to drop, I will probably go ahead and delete all user installed programs and return to full stock just in case. I have not heard of any problems with older programs on ICS but then again we don;t have the official so who knows.
Anyways thanks for not bashing me on this...:silly:
evomike77 said:
+ 1 i nand back to 3.0 from time to time, no issue
Click to expand...
Click to collapse
I've relocked my phone and used the RUU to go back GB twice now pretty easily. I think the issue was if you updated your firmware with the ICS leak, not the ROMs based on the leak.
baj24 said:
I've relocked my phone and used the RUU to go back GB twice now pretty easily. I think the issue was if you updated your firmware with the ICS leak, not the ROMs based on the leak.
Click to expand...
Click to collapse
Really?
I haven't actually tried it, but I read a few places that once you go to ICS via a ROM based on the leak, you are stuck on ICS ROM's.
Just to note, I've read this on the CDMA development area. Hmm, I'll have to try going back just to see myself, I like ICS, personally, but having options to go back is never a bad thing.
Hello Gang,
A friend of mine just got a I500 from his carrier, brand new, as an upgrade from his non-smartphone phone. But, it is running 2.x. He asked me to update the firmware and he doesnt mind an aftermarket one, but I personally want your input to see which one out there is a more....bare bones firmware with no major setting that could confuse or frustrate him (ie...theming, overclocking, etc).
Ive seen Helly Bean and even the standard CM10.1, Gee Whiz? I dunno. Kinda hoped for a TouchWhiz ROM for him.
Thanks,
Paul.....
Well I'd say (in no particular order )
geewiz,,, super nexus,,, carbon,,, or cm10.1.
But you are not going to go wrong with any of them
if you wanna get him a TouchWiz ROM, look at RemICS JB. it's based off of Touchwiz 5 and looks quite a bit like a GS3/Note 2.
i've had the most success with cm10.1. GeeWiz uses Samsung's RFS file system, so you may see improved performance in that, or more things working.
skepticmisfit said:
if you wanna get him a TouchWiz ROM, look at RemICS JB. it's based off of Touchwiz 5 and looks quite a bit like a GS3/Note 2.
i've had the most success with cm10.1. GeeWiz uses Samsung's RFS file system, so you may see improved performance in that, or more things working.
Click to expand...
Click to collapse
Well not entirely true, remics looks like tw... But on jellybean 4.2.2 platform.
Runs same partition and file system setup, etc, etc
Avatar Rom has the themes to suite nearly anyone's taste, pretty solid rom too.
They all have their perks!
man, i'm loving helly bean. came back to it tonight after cm7 was having some issues (wifi was being really flaky) and it's fantastic. the things Devil Kernel can too is overwhelming yet amazing
this is the first time i've ever seen this phone run jelly bean 4.2.2, which has its problems, absolutely perfectly. even on my old class 2 SD card. @hhp_211 i proved you wrong man lol
skepticmisfit said:
man, i'm loving helly bean. came back to it tonight after cm7 was having some issues (wifi was being really flaky) and it's fantastic. the things Devil Kernel can too is overwhelming yet amazing
this is the first time i've ever seen this phone run jelly bean 4.2.2, which has its problems, absolutely perfectly. even on my old class 2 SD card. @hhp_211 i proved you wrong man lol
Click to expand...
Click to collapse
Lol, sweet. Just proved that you had bad flashes before! Lol
Glad you got it!
+1 for helly, it's been my daily rom for awhile now. Tried all the latest but have always returned to hellybean. Hoping for a 4.3 from the devil!
I've been using Helly Bean as my daily driver for a long time and I love it. Once in a while I'll flash the CM10.1 nightly to see how it's doing, but I always seem to have some weird issue or another that makes me go right back to the stability of HB. My only issue with HB is that after using it for a week or so it starts to bog down quicker and quicker. I have to reboot at least once a day now to keep it snappy, whereas when you do a fresh install you can go days without a slowdown. It's not really a huge deal though, and it's still the #1 rom imo.
uh-oh...
Hey Guys,
I flashed Helly Bean via Guide I found here.....and It had no data connection now. I checked through the setting and it's on AUTO mobile networks etc.
Now if I revert back to the Original VZW ROM as indicated in the Guide I do get the connectivity back. Suggestions??
Paul_Days said:
Hey Guys,
I flashed Helly Bean via Guide I found here.....and It had no data connection now. I checked through the setting and it's on AUTO mobile networks etc.
Now if I revert back to the Original VZW ROM as indicated in the Guide I do get the connectivity back. Suggestions??
Click to expand...
Click to collapse
Did you wipe the big 3? I even like to format system in mounts/storage in recovery when I flash a new rom from stock. I have always had data on helly
Paul_Days said:
Hey Guys,
I flashed Helly Bean via Guide I found here.....and It had no data connection now. I checked through the setting and it's on AUTO mobile networks etc.
Now if I revert back to the Original VZW ROM as indicated in the Guide I do get the connectivity back. Suggestions??
Click to expand...
Click to collapse
i have also had data on helly bean whenever i flashed it. try reverting back to stock (it should reflash the EH03 radio as well, my personal recommendation for fassy radios), putting Helly Bean on the phone's SD card (along with Ultra Slim Gapps, not regular Gapps) and then follow these steps:
1. open Odin and put the phone in download mode
2. flash ClockWorkMod 4 fixed for CM7
3. close odin, eject phone, open odin, insert phone
4. flash GBBootloaders
5. close odin and eject phone
6. reboot the phone into recovery, wipe data/factory reset and go to advanced>wipe dalvik cache
7. flash the ROM (it'll boot into its recovery on its own, let it be)
8. flash the Ultra Slim Gapps
9. reboot
Sorry, "Stable Roms" conversation is too close to "Best Roms " conversation. As all roms are, or could be, stable for some, but not others.
Users are expected and encourage to read and learn on their own to make these determinations.
I need some help. I have the latest version of Adobe Flash Player (Version 11.1.115.69) installed on my stock (rooted/unlocked) Verizon Note 2.
On some videos (that are not a mobile version or through the video player) I get this issue where the sound works fine, but the video is completely messed up. It looks like a bunch of colored lines. The lines move as the video goes along. I don't know what to make of it because it only happens on some videos. Also, this has happened with every version of Flash that I have ever tried (which is all of them, as far as I know) with this device. Anyone else have this problem? In any case, can someone on a stock Verizon Note 2 please go to the page below and try and watch the movie? The lines problem has happened every time I have gone to that page and tried to watch the movie, both on the stock browser and with Dolphin Browser. I attached a screenshot of what happens below.
http://viooz.co/movies/19479-monster...sity-2013.html
Any help regarding how to fix this would be most appreciated!
By the way, that movie is an excellent sequel to the first Monsters Inc. and I recommend it.
(And there is no need to freak out about not paying to watch the movie; I am planning to purchase it for my Nephew in the near future.)
nh97103 said:
I need some help. I have the latest version of Adobe Flash Player (Version 11.1.115.69) installed on my stock (rooted/unlocked) Verizon Note 2.
On some videos (that are not a mobile version or through the video player) I get this issue where the sound works fine, but the video is completely messed up. It looks like a bunch of colored lines. The lines move as the video goes along. I don't know what to make of it because it only happens on some videos. Also, this has happened with every version of Flash that I have ever tried (which is all of them, as far as I know) with this device. Anyone else have this problem? In any case, can someone on a stock Verizon Note 2 please go to the page below and try and watch the movie? The lines problem has happened every time I have gone to that page and tried to watch the movie, both on the stock browser and with Dolphin Browser. I attached a screenshot of what happens below.
http://viooz.co/movies/19479-monster...sity-2013.html
Any help regarding how to fix this would be most appreciated!
By the way, that movie is an excellent sequel to the first Monsters Inc. and I recommend it.
(And there is no need to freak out about not paying to watch the movie; I am planning to purchase it for my Nephew in the near future.)
Click to expand...
Click to collapse
I would venture to say that the problem is the site not flash. So far I haven't run across this problem. Try clean wiping and re-flashing. Also what stock rooted ROM are you running?
Hey. Most likely if you are running stock verizon bloated touchwiz, verizon likes to include a file/apk that is hidden that blocks flash player. To get rid of this you generally have to be rooted. After rooted you can either install a custom rom (any will do) OR if you want to stay stock you can use titanium back up and browse through your list off applications. You will noticed a "flash disable" application in red or something like that. Selected it and uninstall it. Once you do that you should have the flash player working properly.
dragonstalker said:
I would venture to say that the problem is the site not flash. So far I haven't run across this problem. Try clean wiping and re-flashing. Also what stock rooted ROM are you running?
Click to expand...
Click to collapse
It has happened to me on far too many sites for it to be their fault. I am on 4.1.1 I605VRALJB. I haven't updated my phone since I bought it in December (bad experiences with updates from Motorola). While this problem is frustrating, I don't think I want to wipe my phone just yet.
monkeyass408 said:
Hey. Most likely if you are running stock verizon bloated touchwiz, verizon likes to include a file/apk that is hidden that blocks flash player. To get rid of this you generally have to be rooted. After rooted you can either install a custom rom (any will do) OR if you want to stay stock you can use titanium back up and browse through your list off applications. You will noticed a "flash disable" application in red or something like that. Selected it and uninstall it. Once you do that you should have the flash player working properly.
Click to expand...
Click to collapse
Hey!
There are two apps that have the world flash in them. I froze them both with My backup Pro and it didn't fix it. Any idea what the name would be if it didn't have the world flash in it?
nh97103 said:
Hey!
There are two apps that have the world flash in them. I froze them both with My backup Pro and it didn't fix it. Any idea what the name would be if it didn't have the world flash in it?
Click to expand...
Click to collapse
What are the names of the apps? you might have frozen the app that runs flash which you want, and then youll have also frozen the app that blocks flash, so over all do you have no flash? (I dont know exacly im just speculating now from what ive read youve done)
edit: maybe try some simple things first, use yet another browser, such as nakedbrowser- its fast and flash works great in it. i would say maybe try unistalling then reinstalling flash, to a newer version http://forum.xda-developers.com/showthread.php?t=2190346 i forget its not on playstore anymore. mines currently at 11.1.115.48
MunkinDrunky said:
What are the names of the apps? you might have frozen the app that runs flash which you want, and then youll have also frozen the app that blocks flash, so over all do you have no flash? (I dont know exacly im just speculating now from what ive read youve done)
edit: maybe try some simple things first, use yet another browser, such as nakedbrowser- its fast and flash works great in it. i would say maybe try unistalling then reinstalling flash, to a newer version http://forum.xda-developers.com/showthread.php?t=2190346 i forget its not on playstore anymore. mines currently at 11.1.115.48
Click to expand...
Click to collapse
The names of the apps are:
com.sec.android.app.FlashBarService (v1.0)
and
FlashAnnotate (v0.8.6) and FlashAnnotateSvc (v0.8.4)
I tried that browser and it still had the problem, both with that version of Flash and the newest one. I think I'll need to re-flash eventually.. I was hoping to avoid it.
nh97103 said:
The names of the apps are:
com.sec.android.app.FlashBarService (v1.0)
and
FlashAnnotate (v0.8.6) and FlashAnnotateSvc (v0.8.4)
I tried that browser and it still had the problem, both with that version of Flash and the newest one. I think I'll need to re-flash eventually.. I was hoping to avoid it.
Click to expand...
Click to collapse
no those are not flash unfreeze them. im sure you already did though. the flashbarservice is for multiwindow and not sure what flashannotatesvc is but its not flash player. since your on 4.1.1 still what version is that flash apk you have now?
MunkinDrunky said:
no those are not flash unfreeze them. im sure you already did though. the flashbarservice is for multiwindow and not sure what flashannotatesvc is but its not flash player. since your on 4.1.1 still what version is that flash apk you have now?
Click to expand...
Click to collapse
Yeah, I unfroze them when it didn't work. I'm on the newest version. 11.1.115.69
Do you know of any glitches/problems with the 4.1.2 update? Is it worth updating to?
nh97103 said:
Yeah, I unfroze them when it didn't work. I'm on the newest version. 11.1.115.69
Do you know of any glitches/problems with the 4.1.2 update? Is it worth updating to?
Click to expand...
Click to collapse
yeah ok well thats where my knowledge really ends as to what might be happening.
I understand your hesitation, but if flash is a thing you really want then that alone could be a reason to update. I have not had or seen any instability, or experienced any glitchyness myself and I have also only stuck to the touchwiz roms (simply personal preference). 4.1.2 on this device, well there isnt anything to fear, no getting burned here. lots o great roms to check out.
edit: oh and one last word if you want to stay as you are. did you try the 115.48 flash version?
MunkinDrunky said:
yeah ok well thats where my knowledge really ends as to what might be happening.
I understand your hesitation, but if flash is a thing you really want then that alone could be a reason to update. I have not had or seen any instability, or experienced any glitchyness myself and I have also only stuck to the touchwiz roms (simply personal preference). 4.1.2 on this device, well there isnt anything to fear, no getting burned here. lots o great roms to check out.
edit: oh and one last word if you want to stay as you are. did you try the 115.48 flash version?
Click to expand...
Click to collapse
Yeah, I have not had good luck with updates. I did try that version just now (and several other versions before now).
4.1.2 has been unlocked and rooted, but is it possible to get back to 4.1.1?
Thank you for trying to help! Really appreciate it!
nh97103 said:
Yeah, I have not had good luck with updates. I did try that version just now (and several other versions before now).
4.1.2 has been unlocked and rooted, but is it possible to get back to 4.1.1?
Thank you for trying to help! Really appreciate it!
Click to expand...
Click to collapse
ok I havent really worried about flash i guess on the custom roms there must be some libraries or plugins or something to have flash fully functional.
Make a full nandroid back up of what your on now. Im not 100% positive but if you want you can then just flash back to 4.1.1. Make sure you restore with the same version of the custom recovery you backed up with if you want to go baack.
You should probably also search that question. I believe it has been answered several times. I might have seen it in passing.
MunkinDrunky said:
ok I havent really worried about flash i guess on the custom roms there must be some libraries or plugins or something to have flash fully functional.
Make a full nandroid back up of what your on now. Im not 100% positive but if you want you can then just flash back to 4.1.1. Make sure you restore with the same version of the custom recovery you backed up with if you want to go baack.
You should probably also search that question. I believe it has been answered several times. I might have seen it in passing.
Click to expand...
Click to collapse
Right, because the backup backups the OS as well as your phone memory. That has always boggled my mind. So I could just restore that and be good.
One last question: When installing this update, I probably don't want to be unlocked, right? I know I can temporarily unroot so no problem there.
nh97103 said:
Right, because the backup backups the OS as well as your phone memory. That has always boggled my mind. So I could just restore that and be good.
One last question: When installing this update, I probably don't want to be unlocked, right? I know I can temporarily unroot so no problem there.
Click to expand...
Click to collapse
yes your nandoid will save the image of your system and data(if thats what you mean by phone memory) so youll restore you to that state.
no if your bootloader unlocked and all that, leave it. I recommend looking over droidstyle guide too, i usually do every now and again just to refresh my mind. You can simply flash a stock 4.1.2 rom check out http://forum.xda-developers.com/showthread.php?t=2387635 so look for one that is basically untouched except for being rooted and unlocked still. You can also try out any 4.1.2 rom too
Nah, jumping between threads is fun!
But seriously, is it completely necessary to factory reset before flashing that?
nh97103 said:
Nah, jumping between threads is fun!
But seriously, is it completely necessary to factory reset before flashing that?
Click to expand...
Click to collapse
Yup. Sorry for late resposnse. So um id suggest if you havent don anything yet. Update to latest recovery proabaly twrp since 8ts easy to use and it seems to be the most versatile (but some customs roms prefer clockwork) then back up efs modem boot system data for a full image of your 4.1.1 so you can be fully backed up. Then do the factory data reset wipe cache and dalvik in recovery after. Af6er wipe then flash rom.
Since you are rooted, you can download the latest version of flash and run it from the stock browser. Chrome has issues with it. I prefer the stock browser as it does exactly what Chrome does but with flash support. And I would suggest atleast upgrading to a 4.1.2 rom. There were alot of bug fixes between the 2.
I'm pleased to report that I flashed that 4.1.2 ROM and the flash player issue is gone.
I was pleasantly surprised to see my sdcard0 remain untouched after I wiped data from custom recovery.
nh97103 said:
I need some help. I have the latest version of Adobe Flash Player (Version 11.1.115.69) installed on my stock (rooted/unlocked) Verizon Note 2.
On some videos (that are not a mobile version or through the video player) I get this issue where the sound works fine, but the video is completely messed up. It looks like a bunch of colored lines. The lines move as the video goes along. I don't know what to make of it because it only happens on some videos. Also, this has happened with every version of Flash that I have ever tried (which is all of them, as far as I know) with this device. Anyone else have this problem? In any case, can someone on a stock Verizon Note 2 please go to the page below and try and watch the movie? The lines problem has happened every time I have gone to that page and tried to watch the movie, both on the stock browser and with Dolphin Browser. I attached a screenshot of what happens below.
Any help regarding how to fix this would be most appreciated!
By the way, that movie is an excellent sequel to the first Monsters Inc. and I recommend it.
(And there is no need to freak out about not paying to watch the movie; I am planning to purchase it for my Nephew in the near future.)
Click to expand...
Click to collapse
It is working for me. There is no problem
vidics4
Flash Player Issue
I think the problem lies with the website. Viooz.co is full of malwares and other viruses. I hate those pop up ads which just pop out on just one click.
There are many websites which you can rely upon :
www.solarmovie.me
www.movie25.ws
www.afdah.com
I have had many phones and never had as much trouble than this phone is giving me. Every rom that does work when I flash them don't have any wifi or service. Even when I install gapps it is like it skips the setup and goes straight to the home screen.
I just came from a bionic and didn't think it would be much of a change to make this phone run like my bionic did. I have tried recreating rom slots with fresh installs and wipes on several roms, most of them cm10 based and even liquid smooth wont even install which is the rom I love the most. I have looked for several fixes but nothing seems to be working.
Is there something I am missing? Do you have to unlock the bootloader on this thing or something? Any help would be appreciated.
Rmbloungeact said:
I have had many phones and never had as much trouble than this phone is giving me. Every rom that does work when I flash them don't have any wifi or service. Even when I install gapps it is like it skips the setup and goes straight to the home screen.
I just came from a bionic and didn't think it would be much of a change to make this phone run like my bionic did. I have tried recreating rom slots with fresh installs and wipes on several roms, most of them cm10 based and even liquid smooth wont even install which is the rom I love the most. I have looked for several fixes but nothing seems to be working.
Is there something I am missing? Do you have to unlock the bootloader on this thing or something? Any help would be appreciated.
Click to expand...
Click to collapse
Wifi usually fixes itself after reboot, but for no-service I dont know.. Are you flashing correct version for your Razr (xt910/xt912), or flashing GSM patch if you have xt912 on GSM network?
Not to be redundant, but how ARE you flashing the ROMs? I've never had issues with connections (so long as I am using the applicable google apps, I have had to revert to a release or two earlier for proper operation in the past). I wouldn't recommend flashing ROMs via RSDlite, if that's the route you're taking. BMM and Safestrap (The latter can be achieved with Matt's Utility, it's what I use) are better options. Using a different partition on the internal storage, and retaining Stock rom. I never had any issues with Avatar (CM10.1 based). I'm about to try out AOKP. Good luck.
LuckiestNut419 said:
Not to be redundant, but how ARE you flashing the ROMs? I've never had issues with connections (so long as I am using the applicable google apps, I have had to revert to a release or two earlier for proper operation in the past). I wouldn't recommend flashing ROMs via RSDlite, if that's the route you're taking. BMM and Safestrap (The latter can be achieved with Matt's Utility, it's what I use) are better options. Using a different partition on the internal storage, and retaining Stock rom. I never had any issues with Avatar (CM10.1 based). I'm about to try out AOKP. Good luck.
Click to expand...
Click to collapse
Well I have been using safestrap since I used it on my Bionic and I am already familiar with it. The one that is bugging me the most is not being able to flash LiquidSmooth 2.9. (I am on SS 3.53 btw) Also I am using the XT912 and already researched the difference between 910 ROMS before flashing.
When I try to install it the error comes up saying:
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Warning: no file_contexts
set_perm: some changes found
E: error executing updater binary in zip '/sdcard-ext/Liquid-JB-v2.9-OFFICIAL-spyder.zip
Error flashing zip
I just wonder, if that thing is saying that the zip is meant to be an update for an existing version of LiquidSmooth. But on goo.im there is only 2.7, 2.8 and 2.9.
I've never seen that error (but I've been wanting to try LiquidSmooth, maybe I can duplicate the problem). I know with AOKP, I have to install on romslot2. For whatever reason. Have you tried any other slots besides 1?
EDIT
http://forum.xda-developers.com/showthread.php?t=2222535
The installation instruction for LiquidSmooth 2.9 say to install on RomSlot3, and only RomSlot3. I'll give it a whirl on 1 and see if the error is duplicated, but it shouldn't effect the install, regardless of the slot #.
http://goo.im/devs/liquidsmooth/spyder/Liquid-JB-v2.9-OFFICIAL-spyder.zip
This is the mirror I used to get the ROM.
Installed on Slot 1 without errors. Flashed gapps, wiped cache, restarted- wouldn't boot.
Wiped and deleted Slot 1
Installed on Slot 3 without errors. Flashed gapps, wiped cache, restarted- Success!
I never could duplicate the error you had, using the JB Liquid Smooth I got from goo.im
Also, for what it's worth, in the "Issues" category on the LS link from above, it said there was an autofix that would correct the wifi connectivity problem. Mine would never fully turn on wifi on first boot. Rebooted, worked perfectly. And the CM style setup went off without a hitch.
I also used goo.im to get mine. I tried all three versions of it but no success; all three got the same error code. I am wondering if the version of safestrap I am using is causing the error.
Rmbloungeact said:
I also used goo.im to get mine. I tried all three versions of it but no success; all three got the same error code. I am wondering if the version of safestrap I am using is causing the error.
Click to expand...
Click to collapse
Just threw out the version 3.5x of SS I was using. Going to try 3.11 and see how it goes. Man, I hope this works, I just came back from using an iPhone for the last two months after letting my brother have my Bionic because they couldn't flash the iPhone on his service provider. I guess if it doesn't work I will be happy having android back nonetheless. Just want something other than motoblur.
Rmbloungeact said:
Just threw out the version 3.5x of SS I was using. Going to try 3.11 and see how it goes. Man, I hope this works, I just came back from using an iPhone for the last two months after letting my brother have my Bionic because they couldn't flash the iPhone on his service provider. I guess if it doesn't work I will be happy having android back nonetheless. Just want something other than motoblur.
Click to expand...
Click to collapse
So I scrapped 3.5x for 3.11 and the install went perfectly normal. Accidentally installed the wrong gapps package and had a force close assault from hell. Redid it with the right gapps and everything is up and running now. I am so glad to have it running and ready to set up now. Thanks for your help guys!