Related
After shutting down and turning on my phone again this morning, it will not boot up and instead freezes on the white splash screen with the green HTC logo. I have tried waiting it out, clearing the caches, flashing the kernel, and just tried a hard reset, all to no avail.
Also, if I plug my phone into the charger, the orange light comes on. However, it remains on when I unplug it from the wall and the only way to get the light off is to take out the battery.
I was using a custom ROM, the Amazing QuikSense 2.1.2, for the past 4 months without any problems. I haven't installed any new applications in awhile. I don't know what caused this. What can I do to get my phone working again?
Can you get into recovery? Try taking battery out, put back in, hold volume down and power at same time and see if you can get into recovery. If so, reflash the rom.
yes, i can get into recovery and to ClockworkMod
i have already tried flashing the ROM again but it is still freezing when booting
eudemonics said:
i have already tried flashing the ROM again but it is still freezing when booting
Click to expand...
Click to collapse
How are you flashing the kernel? Fastboot or ADB? ADB may not work on a soft brick... Maybe try fastboot?
OR
Did your battery die and that's what triggered this? If your battery is dead and you are on a CWM that doesn't have charging while off, you could be screwed until u get a fresh battery. Does the phone turn off after hanging on splash screen?
Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5
i tried flashing the kernel using this utility, in ClockworkMod:
http://forum.xda-developers.com/showthread.php?t=1552889
eudemonics said:
i tried flashing the kernel using this utility, in ClockworkMod:
http://forum.xda-developers.com/showthread.php?t=1552889
Click to expand...
Click to collapse
Theres ur problem, u need to use ekf
Idk if there is still a thread with ekf, but u can just download fauxs kernel from his thread, extract the zip on your computer, put your fone in fastboot and connect the phone to the computer via usb. Open the folder u extracted the zip to and open the file that says flash.bat and it will do the rest
Sent from my NRGized Amaze...
via xda premium
i have EKF but i am using a Mac now and can't get into my PC. i used the utility because i was unable to figure out how to flash it in terminal
i have tried flashing the kernel through ADB and flashing the ROM and it is still freezing on the HTC startup screen.. i don't know what to do next.. please help
it says:
fastboot flash boot Kernel-Here/boot.img
sending 'boot' <2876 KB>... FAILED <status malformed <1 bytes>>
the boot.img file is fine - why is it failing?
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Urgent help me
I am using htc amaze wind
i used hasoon `s tool , i just clicked on flash your kernels and my phone is not started up. It shows me only htc screen ...
Please help me out
---------- Post added 1st November 2012 at 12:00 AM ---------- Previous post was 31st October 2012 at 11:45 PM ----------
i am new in this .. my phone is not starting up. what should i do ? when i went to team recoveries project and try to restore it shows like no os installed ..
please help me
suratimehul said:
I am using htc amaze wind
i used hasoon `s tool , i just clicked on flash your kernels and my phone is not started up. It shows me only htc screen ...
Please help me out
---------- Post added 1st November 2012 at 12:00 AM ---------- Previous post was 31st October 2012 at 11:45 PM ----------
i am new in this .. my phone is not starting up. what should i do ? when i went to team recoveries project and try to restore it shows like no os installed ..
please help me
Click to expand...
Click to collapse
I'm not sure if I can help you but other could and will if you provided more specific infos about your phone
1. What kernel did you tried to flash, using hansoon's toolkit?
2. What is your phone status before trying to flashed kernel? I.e are you rooted? Unlocked bootloader? S-Off? Running custom Rom or stock, ect and ect ...
3. When using toolkit to flash kernel, did you put ANY kernel in the "Kernels" folder at all???
antiquezip said:
I'm not sure if I can help you but other could and will if you provided more specific infos about your phone
1. What kernel did you tried to flash, using hansoon's toolkit?
2. What is your phone status before trying to flashed kernel? I.e are you rooted? Unlocked bootloader? S-Off? Running custom Rom or stock, ect and ect ...
3. When using toolkit to flash kernel, did you put ANY kernel in the "Kernels" folder at all???
Click to expand...
Click to collapse
Amaze_All-In-One_Kit_V4.0 . I UNLOCKED BOOT LOADER THAN I FLASH RECOVERY TWRP 2.3.1.0 AND I FLASHED KERNEL WITH FLASH KERNEL .. THATS ALL THAN MY PHONE DOSENT START ..
AFTER THAT I REMOVED MY BATTERY AND TRY TO PUT IN BOOTLOADER AND RUN RECOVERY , TRY TO RECOVER BUT IS SHOWS LIKE NO OS INSTALLED ??????
actually i wipe all data in recovery mode i used TWRP AND WIPE ALL SYSTEM DATA AND PHONE STORAGE .. PLEASE SOMEBODY HELP ME
---------- Post added at 02:01 PM ---------- Previous post was at 01:28 PM ----------
This will flash TWRP.
If it says "Waiting For Device"
Go to Settings -> Develop Option
and enable USB Debugging.
Press a button to continue.
C:\Users\Mehul\Desktop\Amaze_All-In-One_Kit_V4.0\data>pause
Press any key to continue . . .
C:\Users\Mehul\Desktop\Amaze_All-In-One_Kit_V4.0\data>adb kill-server
* server not running *
C:\Users\Mehul\Desktop\Amaze_All-In-One_Kit_V4.0\data>adb reboot bootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Users\Mehul\Desktop\Amaze_All-In-One_Kit_V4.0\data>fastboot flash recovery Re
coveries/TWRP.img
< waiting for device >
sending 'recovery' (6246 KB)... OKAY [ 1.540s]
writing 'recovery'... OKAY [ 4.535s]
finished. total time: 6.075s
C:\Users\Mehul\Desktop\Amaze_All-In-One_Kit_V4.0\data>fastboot reboot
rebooting...
finished. total time: 1.934s
C:\Users\Mehul\Desktop\Amaze_All-In-One_Kit_V4.0\data>pause
Press any key to continue . . .
You wiped all of your data and system, so it's basically means that you have nothing on your phone, no OS, nada, that's why the phone would not boot up.
I suggest you to read more before doing anything to your phone next time :fingers-crossed:
At least you still have recovery on your phone. I'm not sure if TWRP would allow your phone to be charge while off, if it's not, then you better stop doing any further and try to look around to see if you have a wall-charger to charge your battery. Make sure it's full before proceed any further.
These next steps would be
1. Read this thread
2, Flashing 4EXT recovery would be your best bet since it allow your phone to be charged while off - this will be a life saver.
3. Flash an RUU to get back to stock. Note: You will need to re-lock your bootloader in order to do this
Good luck
antiquezip said:
You wiped all of your data and system, so it's basically means that you have nothing on your phone, no OS, nada, that's why the phone would not boot up.
I suggest you to read more before doing anything to your phone next time :fingers-crossed:
At least you still have recovery on your phone. I'm not sure if TWRP would allow your phone to be charge while off, if it's not, then you better stop doing any further and try to look around to see if you have a wall-charger to charge your battery. Make sure it's full before proceed any further.
These next steps would be
1. Read this thread
2, Flashing 4EXT recovery would be your best bet since it allow your phone to be charged while off - this will be a life saver.
3. Flash an RUU to get back to stock. Note: You will need to re-lock your bootloader in order to do this
Good luck
Click to expand...
Click to collapse
thank you very much , but what should i do first i am afraid to do... please suggest me first step and be easy on me !!
You still be able to boot into your recovery, right? I don't use TWRP so I'm not sure but you will need to know how much juice you still have before going further. In 4EXT recovery, it tell you that information inside recovery though ...
Next, I would flash 4EXT recovery to make sure you can charge your phone while it's off ... using Hansoon's toolkit. Don't try to flash kernel again for you don't needed it as yet
The rest is very much already told. You will try to go back to stock by reading the link that I've provided.
PS: DON'T be affraid. DONT Panic. Just read through the Amaze Bible to gain more knowledge and confident. You'll be okay. Just take your time to read. It's not that hard as you though while in panic mode
antiquezip said:
You still be able to boot into your recovery, right? I don't use TWRP so I'm not sure but you will need to know how much juice you still have before going further. In 4EXT recovery, it tell you that information inside recovery though ...
Next, I would flash 4EXT recovery to make sure you can charge your phone while it's off ... using Hansoon's toolkit. Don't try to flash kernel again for you don't needed it as yet
The rest is very much already told. You will try to go back to stock by reading the link that I've provided.
PS: DON'T be affraid. DONT Panic. Just read through the Amaze Bible to gain more knowledge and confident. You'll be okay. Just take your time to read. It's not that hard as you though while in panic mode
Click to expand...
Click to collapse
thank you very much . yes i am still able to boot in recovery- (4EXT TOUCH ) let me go through the reading but i don't have external sd card ..IS IT FINE ??
---------- Post added at 10:05 PM ---------- Previous post was at 09:54 PM ----------
Now to the steps.
1. Download the stock ruu from here
2. Lock your bootloader by using the fastboot command "fastboot oem lock"
3. Reboot to system
4. Flash the stock RUU you downloaded by placing it in the root of your external sd card and renaming it PH85IMG.zip and rebooting to bootloader.
5. Once you have the stock rom reinstalled, set the security lock by using fastboot command " fastboot oem writesecureflag 3"
6. Profit?
I DOWNLOADED STOCK RUU ,AND I LOCKED BOOTLOADER . I REBOOT THE SYSTEM AND IT RELOCKED . NOW MOVING TO (4) STEP I DIDNT GET WHAT TO DO ???
suratimehul said:
thank you very much . yes i am still able to boot in recovery- (4EXT TOUCH ) let me go through the reading but i don't have external sd card ..IS IT FINE ??
---------- Post added at 10:05 PM ---------- Previous post was at 09:54 PM ----------
Now to the steps.
1. Download the stock ruu from here
2. Lock your bootloader by using the fastboot command "fastboot oem lock"
3. Reboot to system
4. Flash the stock RUU you downloaded by placing it in the root of your external sd card and renaming it PH85IMG.zip and rebooting to bootloader.
5. Once you have the stock rom reinstalled, set the security lock by using fastboot command " fastboot oem writesecureflag 3"
6. Profit?
I DOWNLOADED STOCK RUU ,AND I LOCKED BOOTLOADER . I REBOOT THE SYSTEM AND IT RELOCKED . NOW MOVING TO (4) STEP I DIDNT GET WHAT TO DO ???
Click to expand...
Click to collapse
Writesecurityflag??? Its been a while for me but that doesnt sound right. If s=off u want... u need the wire trick... After step 4 (which is accurate btw) u need to put the recovery.img of your choice (4ext highly recommended) in the same folder as your fastboot.exe program on pc. I recommend renaming it "recovery.img" and then you type "fastboot flash recovery recovery.img" to flash ur custom recovery of choice. From there, reboot into recovery and flash superuser.zip. then u r rooted stock
Sent from my Wicked Galaxy S III
For use on Verizon variant HTC ONE MAX only!!!
S-off users only!!!!
Software version 1.11.605.4
Stock Recovery-
http://www.androidfilehost.com/?fid=23252070760974293
flash via fastboot
fastboot flash recovery recovery.img
Stock Kernel (insecure)-
http://www.androidfilehost.com/?fid=23252070760974294
flash via fastboot
fastboot flash boot boot.img
System Image (must unrar first to get system.img)
http://www.androidfilehost.com/?fid=23252070760974295
flash via fastboot
fastboot flash system system.img
Flashable radio-
download this:
https://www.mediafire.com/?ucj15e2zavewnbq
vzw_max_radio.zip ba7f0302040731949a4db3cb0c9c4e98
double check the md5 matches above.
flash in ruu mode:
-phone in fastboot
-open cmd
-enter:
fastboot devices
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip vzw_max_radio.zip
fastboot reboot-bootloader
if you see a baseband in the bootloader screen now,thats a good sign
fastboot reboot
Credits- Scotty1223 for working his radio magic
Jiggity Janx - afh mirrors
Awesome sauce, thank you :good:
@dottat is it possible to write a script for those for the n00bs that may be the faint of heart type? Like a flash-all deal? I'm good with manually flashing them all individually but for those that aren't that would be dope.. Can you even do that with the .img's for HTC devices?
Murrda said:
@dottat is it possible to write a script for those for the n00bs that may be the faint of heart type? Like a flash-all deal? I'm good with manually flashing them all individually but for those that aren't that would be dope.. Can you even do that with the .img's for HTC devices?
Click to expand...
Click to collapse
dottat worked with the Flashify dev to get it working with the One Max. Recommend everyone use that.
HELP !!!
I tried flashing the system img, but keep on getting this error msg below. Can't do anything else but go into Custom Recovery.
error: cannot load 'system.img': Not enough space
---------- Post added at 09:27 PM ---------- Previous post was at 09:15 PM ----------
mustangmao said:
HELP !!!
I tried flashing the system img, but keep on getting this error msg below. Can't do anything else but go into Custom Recovery.
error: cannot load 'system.img': Not enough space
Click to expand...
Click to collapse
When sending boot image after i use fastboot erase boot commend, it just stuck on sending 'boot' <16384 kb> and nothing happens. Any help suggestion?
...Send boot.img when flashing boot. Send system when sending system. Can't flash system into boot partition
The boot partition is only 16 megs so if you try to flash a 2 gig file into it you'll prolly hang.
Flashing the 2gig system.img to the system partition properly will likely take some time. You have screenshots?
Sent from my HTC6600LVW using Tapatalk 4
That's exactly what i did following your instruction. Here's the steps i did (BTW: I will take screenshots as soon as i am home)
1) Went into TWRP and performed a wipe (Data, cache and system)
2) Connect MAX to PC (Win 7 64bit)
3) Go into Fastboot mode (tested using Fastboot devices and results came back with serial number)
4) Copied System and Boot img into the same folder as Fastboot/ADB
5) Issue commend: fastboot flash boot boot.img ---- Error: 1st it was stuck on sending, nothing happens for like 10 minutes, unplug then tried Run CMD with local admin, got a different error msg, this time it says FAILED (remote: not allowed)
6) Then I tried flash just system.img using fastboot flash system system.img --- got error: cannot load 'system.img': Not enough space
I then went back into TWRP, basically did a complete wipe of everything (lucky TWRP was intact), went back into Fastboot mode and did another erase.
1) Enter Fastboot mode and issued: Fastboot erase boot, recovery and system -- All went fine
2) Then tried flash individual recovery/boot/system into its partition, same error msg as above
I thought i am toast for sure, but upon rebooting, i still have TWRP and Thank God i had a Full Backup stored on my external SD card, I just did a restore and everyone is back to where i left off..
thanks for your quick response
---------- Post added at 12:29 AM ---------- Previous post was at 12:08 AM ----------
mustangmao said:
That's exactly what i did following your instruction. Here's the steps i did (BTW: I will take screenshots as soon as i am home)
1) Went into TWRP and performed a wipe (Data, cache and system)
2) Connect MAX to PC (Win 7 64bit)
3) Go into Fastboot mode (tested using Fastboot devices and results came back with serial number)
4) Copied System and Boot img into the same folder as Fastboot/ADB
5) Issue commend: fastboot flash boot boot.img ---- Error: 1st it was stuck on sending, nothing happens for like 10 minutes, unplug then tried Run CMD with local admin, got a different error msg, this time it says FAILED (remote: not allowed)
6) Then I tried flash just system.img using fastboot flash system system.img --- got error: cannot load 'system.img': Not enough space
I then went back into TWRP, basically did a complete wipe of everything (lucky TWRP was intact), went back into Fastboot mode and did another erase.
1) Enter Fastboot mode and issued: Fastboot erase boot, recovery and system -- All went fine
2) Then tried flash individual recovery/boot/system into its partition, same error msg as above
I thought i am toast for sure, but upon rebooting, i still have TWRP and Thank God i had a Full Backup stored on my external SD card, I just did a restore and everyone is back to where i left off..
thanks for your quick response
Click to expand...
Click to collapse
BTW: Reason I need to flash the Stock Rom is because my One Max has this weird charging problem, where once the phone is turned on, it only charges to 35-37% and it stops, however if I leave it powered off and charge, it charges to 100% all the way. It must be a software issue and since I am using it on AT&T, Verizon CS and retail store doesn't even want to offer at help. So, i am kinda stuck with fixing the issue myself.
mustangmao said:
That's exactly what i did following your instruction. Here's the steps i did (BTW: I will take screenshots as soon as i am home)
1) Went into TWRP and performed a wipe (Data, cache and system)
2) Connect MAX to PC (Win 7 64bit)
3) Go into Fastboot mode (tested using Fastboot devices and results came back with serial number)
4) Copied System and Boot img into the same folder as Fastboot/ADB
5) Issue commend: fastboot flash boot boot.img ---- Error: 1st it was stuck on sending, nothing happens for like 10 minutes, unplug then tried Run CMD with local admin, got a different error msg, this time it says FAILED (remote: not allowed)
6) Then I tried flash just system.img using fastboot flash system system.img --- got error: cannot load 'system.img': Not enough space
I then went back into TWRP, basically did a complete wipe of everything (lucky TWRP was intact), went back into Fastboot mode and did another erase.
1) Enter Fastboot mode and issued: Fastboot erase boot, recovery and system -- All went fine
2) Then tried flash individual recovery/boot/system into its partition, same error msg as above
I thought i am toast for sure, but upon rebooting, i still have TWRP and Thank God i had a Full Backup stored on my external SD card, I just did a restore and everyone is back to where i left off..
thanks for your quick response
---------- Post added at 12:29 AM ---------- Previous post was at 12:08 AM ----------
BTW: Reason I need to flash the Stock Rom is because my One Max has this weird charging problem, where once the phone is turned on, it only charges to 35-37% and it stops, however if I leave it powered off and charge, it charges to 100% all the way. It must be a software issue and since I am using it on AT&T, Verizon CS and retail store doesn't even want to offer at help. So, i am kinda stuck with fixing the issue myself.
Click to expand...
Click to collapse
Are you unlocked? Because remote not allowed word indicates you are not. Can you confirm?
If your kernel is what got hosed you always flash my boot.IMG using the app flashify from the market from a booted rooted rom....assuming you are unlocked. Otherwise you will have create a flashable 0p3img.zip file and flash your kernels from hboot.
Sent from my HTC6600LVW using Tapatalk 4
dottat said:
Are you unlocked? Because remote not allowed word indicates you are not. Can you confirm?
If your kernel is what got hosed you always flash my boot.IMG using the app flashify from the market from a booted rooted rom....assuming you are unlocked. Otherwise you will have create a flashable 0p3img.zip file and flash your kernels from hboot.
Sent from my HTC6600LVW using Tapatalk 4
Click to expand...
Click to collapse
Yes, i am unlocked and S-OFF and rooted.
Tried another PC and using factory HTC cable, still the same error when flashing system.
Now, if the issue is with my OS, all i need to flash is just System.img and nothing else, right?
mustangmao said:
Yes, i am unlocked and S-OFF and rooted.
Tried another PC and using factory HTC cable, still the same error when flashing system.
Now, if the issue is with my OS, all i need to flash is just System.img and nothing else, right?
Click to expand...
Click to collapse
Load flashify (free) from the app store. Copy the boot.IMG to your SD card and flash boot from that app and report back.
Sent from my Nexus 7 using Tapatalk 4
dottat said:
Load flashify (free) from the app store. Copy the boot.IMG to your SD card and flash boot from that app and report back.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Flash boot.img from SDcard, everything went fine, just rebooted the phone, no issues. Now, how do i flash the System.IMG, which is the key to hopfully solve the battery charing issue? thanks
It should be via fastboot...but your fast boot install doesn't seem to like flashing anything to your phone. Do you have any other pcs you can try and can you see if your charging issue was fixed before proceeding ?
Sent from my Nexus 7 using Tapatalk 4
dottat said:
It should be via fastboot...but your fast boot install doesn't seem to like flashing anything to your phone. Do you have any other pcs you can try and can you see if your charging issue was fixed before proceeding ?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Wow, i am amazed, just flashing the boot.img and my phone starts chargin pass 37% now while the phone is powered on. Maybe i don't need to flash system.img after all. You rocks dude, thanks so much. Keep up the good work !!!
for what its worth,ive never been able to fastboot flash system system.img ive always gotten that space error.
ive just skimmed thru this,but the easiest way7 for you guys to flash this is to just open the radio zip and add the other images to it. then you can use those directions(oem rebootRUU,etc) and flash them all in one shot.
i could work with you guys to dump the relevant images that usually come in an ruu if you want to make up a full(unsigned) ruu.
I also had the charging issue.(wouldn't charge past 37%....Switched charger and the issue is no more.
sent from my humongous VZW HTC ONE MAX
mustangmao said:
Wow, i am amazed, just flashing the boot.img and my phone starts chargin pass 37% now while the phone is powered on. Maybe i don't need to flash system.img after all. You rocks dude, thanks so much. Keep up the good work !!!
Click to expand...
Click to collapse
Sorta figured that would happen...good deal.
Sent from my HTC6600LVW using Tapatalk 4
scotty1223 said:
for what its worth,ive never been able to fastboot flash system system.img ive always gotten that space error.
ive just skimmed thru this,but the easiest way7 for you guys to flash this is to just open the radio zip and add the other images to it. then you can use those directions(oem rebootRUU,etc) and flash them all in one shot.
i could work with you guys to dump the relevant images that usually come in an ruu if you want to make up a full(unsigned) ruu.
Click to expand...
Click to collapse
Lets make that
Sent from my HTC6600LVW using Tapatalk 4
I know someone was working on decrypting the verizon ruu. He said recently he had gotten busy with some other stuff. So itbis out there and somewhat done already. Just didnt want you guys to put a lotbinto it when there may be other avenues.
Jiggity Janx said:
I know someone was working on decrypting the verizon ruu. He said recently he had gotten busy with some other stuff. So itbis out there and somewhat done already. Just didnt want you guys to put a lotbinto it when there may be other avenues.
Click to expand...
Click to collapse
Good to know, thanks for the heads up.
Jiggity Janx said:
I know someone was working on decrypting the verizon ruu. He said recently he had gotten busy with some other stuff. So itbis out there and somewhat done already. Just didnt want you guys to put a lotbinto it when there may be other avenues.
Click to expand...
Click to collapse
any idea where it is? I hadn't seen one but there's an app for decrypting
I rooted the Hydro Elite last night and immediately started cleaning up the Verizon bloatware. I must have went a little crazy and removed an APK from the system/app folder that is required for the phone function to run. I am now just getting FC's on 'com.android.phone' when not in airplane mode. Tried a factory reset to no luck, tried some APK restores from similar models, etc. In my arrogance of thinking I know what I am doing I did not backup the APK's I removed from the system/app folder. Normally this would be no big deal, I could just pull them from the ROM image, or reload an image, or whatever. But, it seems Kyocera or Verizon have absolutely no self-help ROM's on the net to reinstall nor has any custom ROMs been developed for this phone yet. I have the system zip but i dont know what or how to use or flash it/ restore it! SOMEBODY PLEASEEEEEE HELP ME
Roblewis17 said:
I rooted the Hydro Elite last night and immediately started cleaning up the Verizon bloatware. I must have went a little crazy and removed an APK from the system/app folder that is required for the phone function to run. I am now just getting FC's on 'com.android.phone' when not in airplane mode. Tried a factory reset to no luck, tried some APK restores from similar models, etc. In my arrogance of thinking I know what I am doing I did not backup the APK's I removed from the system/app folder. Normally this would be no big deal, I could just pull them from the ROM image, or reload an image, or whatever. But, it seems Kyocera or Verizon have absolutely no self-help ROM's on the net to reinstall nor has any custom ROMs been developed for this phone yet. I have the system zip but i dont know what or how to use or flash it/ restore it! SOMEBODY PLEASEEEEEE HELP ME
Click to expand...
Click to collapse
Try putting the phone in airplane mode then enable wifi, if that works then download "flash GUI" from google play and try installing the zip that way. Its a long shot but you got nothing to loose.
I wish I could but my phone is currently in a bootloop, I could only goto recovery and fastboot
Sent from my XT862 using XDA Free mobile app
Roblewis17 said:
I wish I could but my phone is currently in a bootloop, I could only goto recovery and fastboot
Sent from my XT862 using XDA Free mobile app
Click to expand...
Click to collapse
Ok I thought you still had function in airplane mode. I don't own this phone but I am assuming the bootloader is locked. If it is then there is no way out because you have no custom recovery and now way to flash. What options / features do you have in recovery?
---------- Post added at 11:23 AM ---------- Previous post was at 10:55 AM ----------
Roblewis17 said:
I wish I could but my phone is currently in a bootloop, I could only goto recovery and fastboot
Sent from my XT862 using XDA Free mobile app
Click to expand...
Click to collapse
Ran across this not sure if it will help, good luck
How to: Use "adb sideload" on your Android device
Probably every Android power-user at least once in his life used ADB - Android Debug Bridge. It is a versatile command line tool that lets you communicate with an emulator instance or connected Android-powered device. Using ADB shell commands gives you additional control over your device and sometimes it can save your device from being bricked (example: How to: copy ROM zip file to the freshly wiped device). You can find some more basic information about ADB here.
Since Android Jelly Bean there has been a new ADB mode available in the AOSP recovery, incorporated by the Android developer community into custom recoveries too. It is called "ADB sideload" and most of you probably have heard about it already. This is an alternate method to the one I wrote about here - How to: copy ROM zip file to the freshly wiped device. The main difference is that ADB sideload works only with recoveries based on Jelly Bean source or newer. I believe that ADB sideload was created to simplify the process of flashing/restoring Android update.zip packages.
Keep in mind that while using ADB sideload, the regular ADB shell won't work. To be able to use SIDELOAD mode make sure you're running latest ADB drivers from the Android SDK (Platform-tools). Here are the simple steps you need to follow to flash update.zip package using adb sideload mode (based on stock Android recovery):
Place the ZIP package you want to install in the same location where you keep ADB drivers - adb.exe, AdbWinApi.dll and AdbWinUsbApi.dll (usually it's SDK\platform-tools)
Make sure you have USB debugging enabled in Settings > Development on your device
Make sure your phone drivers are installed on the PC you're going to use
Boot your device in recovery mode (Android logo with a exclamation mark) and connect your device to PC
Hold down "power" button first, followed quickly by "volume up" button. You should now see the recovery menu
Use the volume up/down keys to select "apply update from ADB," then press power to select it
Open a command prompt on the PC (cmd.exe), type and confirm with ENTER:
cd /d <adb.exe location> (for example: cd /d c:\SDK\platform-tools) or you can open your SDK/platform-tools folder, then press SHIFT button and the right-click mouse button and choose “Open command prompt here”
adb sideload <filename>.zip (for example: adb sideload update.zip)
The zip package will begin installing. When it's done, select "reboot system now."
How is that different from the alternative method? You don't have to manually create the proper folders structure, push the file and later install if from inside the recovery menu. The result is basically the same, because ADB sideload is also transferring the zip file into the device internal memory and later it automatically begins the installation procedure. However, it works only with recoveries based on Android Jelly Bean source.
Source: Android revolution HD
Only to factory reset & wip cache partition. I'm guessing u gotta fatboot it but I don't know of any way to do so. I have the system zip tho
Sent from my XT862 using XDA Free mobile app
Oh wow I always had trouble doing command I will try my best. So do I put the phone in recovery or fastboot?
Sent from my XT862 using XDA Free mobile app
My recovery menu doesn't offer the option to apply update from zip only to factory reset & wipe cache partition.
Sent from my XT862 using XDA Free mobile app
Roblewis17 said:
My recovery menu doesn't offer the option to apply update from zip only to factory reset & wipe cache partition.
Sent from my XT862 using XDA Free mobile app
Click to expand...
Click to collapse
Ok try to enable fast boot on your phone. Then connect to PC. Copy the zip file that you got from the Russian guy and paste into your fast boot folder. Type "Fast Boot name of file .zip" then type " type in commands to reboot your phone. And switch back to your phone, ( click on it from your desktop as if you are going to "safely remove". Google using fast boot to umbirick any android phone" tons of guides. I would post links but XDA does not allow it until I have posted 10 times
OK so which fastboot program do I use? And which fastboot folder exactly do I put the system zip in?
Sent from my XT862 using XDA Free mobile app
Roblewis17 said:
OK so which fastboot program do I use? And which fastboot folder exactly do I put the system zip in?
Sent from my XT862 using XDA Free mobile app
Click to expand...
Click to collapse
Ok google these 2 utube videos:
"How to install android sdk, adb, and fast boot" by Qbking77 this is how to for adb
Also take a peek at "how to install and use fastboot tutorial-Nexus" by Chris Nacca.
That should get you started
OK thank you. I have something called minimal fastboot on my PC is that the same fastboot? And also you can PM me the links you wanted to send me but couldn't
Sent from my XT862 using XDA Free mobile app
Doesnt work
Lpen21 said:
Ok google these 2 utube videos:
"How to install android sdk, adb, and fast boot" by Qbking77 this is how to for adb
Also take a peek at "how to install and use fastboot tutorial-Nexus" by Chris Nacca.
That should get you started
Click to expand...
Click to collapse
this doesnt work on Windows 8 64bit. any other options?
Roblewis17 said:
this doesnt work on Windows 8 64bit. any other options?
Click to expand...
Click to collapse
Sorry to hear, not familiar with windows 8. Im out of answers at this point with respect to fastboot. Maybe try contacting kyocera or verizon and tell them your predicament. They may switch out your phone. Kyoceras are unforgiving phones because of locked bootloaders.
---------- Post added at 05:10 PM ---------- Previous post was at 05:05 PM ----------
Roblewis17 said:
OK thank you. I have something called minimal fastboot on my PC is that the same fastboot? And also you can PM me the links you wanted to send me but couldn't
Sent from my XT862 using XDA Free mobile app
Click to expand...
Click to collapse
Minimal,fastboot is an abbreviated version, should be the same/do the same thing. Look it up on xda forums. Not familiar with it so you are on your own with how it works.
solution?
Lpen21 said:
Sorry to hear, not familiar with windows 8. Im out of answers at this point with respect to fastboot. Maybe try contacting kyocera or verizon and tell them your predicament. They may switch out your phone. Kyoceras are unforgiving phones because of locked bootloaders.
---------- Post added at 05:10 PM ---------- Previous post was at 05:05 PM ----------
Minimal,fastboot is an abbreviated version, should be the same/do the same thing. Look it up on xda forums. Not familiar with it so you are on your own with how it works.
Click to expand...
Click to collapse
Hydro Elite CWM (ported from LG Spectrum 2) can be loaded through fastboot from PC (fastboot boot hydro_cwm.img). If you can enter fastboot mode (yellow penguin) you could restore phone by loading CWM and restore from backup.
Link to CWM image: http://yadi.sk/d/sT3hyWWeLPuuD
Another way - flashing whole system.img partition through fastboot flash system system.img. Link to archive with stock 2.03 system image: http://4pda.ru/pages/go/?u=http:%2...ocera_elite.7z
ok here somebody sent me a solution i think this is the correct way , however can break this down to me in more detail.
Roblewis17 said:
Hydro Elite CWM (ported from LG Spectrum 2) can be loaded through fastboot from PC (fastboot boot hydro_cwm.img). If you can enter fastboot mode (yellow penguin) you could restore phone by loading CWM and restore from backup.
Link to CWM image: http://yadi.sk/d/sT3hyWWeLPuuD
Another way - flashing whole system.img partition through fastboot flash system system.img. Link to archive with stock 2.03 system image: http://4pda.ru/pages/go/?u=http:%2...ocera_elite.7z
ok here somebody sent me a solution i think this is the correct way , however can break this down to me in more detail.
Click to expand...
Click to collapse
Not sure you could load CWM since bootloader is locked, but flashing the whole system may do the trick. The exact breakdown is beyond my abilities. Maybe post the question on this forum on how to flash system img via fastboot. That should in theory restore you back to original state.
./
Roblewis17 said:
Hydro Elite CWM (ported from LG Spectrum 2) can be loaded through fastboot from PC (fastboot boot hydro_cwm.img). If you can enter fastboot mode (yellow penguin) you could restore phone by loading CWM and restore from backup.
Link to CWM image: http://yadi.sk/d/sT3hyWWeLPuuD
Another way - flashing whole system.img partition through fastboot flash system system.img. Link to archive with stock 2.03 system image: http://4pda.ru/pages/go/?u=http:%2...ocera_elite.7z
ok here somebody sent me a solution i think this is the correct way , however can break this down to me in more detail.
Click to expand...
Click to collapse
ok thank you I'll try my best. youve been such a big help
Roblewis17 said:
ok thank you I'll try my best. youve been such a big help
Click to expand...
Click to collapse
Good luck and keep us posted if you un brick it, I'm sure many others in same situation
Turns out this adb fastboot just wouldn't
Work on windows 8 64 bit
Sent from my XT862 using XDA Free mobile app
Roblewis17 said:
I wish I could but my phone is currently in a bootloop, I could only goto recovery and fastboot
Sent from my XT862 using XDA Free mobile app
Click to expand...
Click to collapse
Hello
Please can you help me put on my Kyocera C6750 fastboot mode.
It restarts and I can only get into recovery mode.
Thank you
mfeliu07
Hello People !!!
Want to return your OP2 to 100% Stock Factory Image or have you soft bricked OP2 and nothing except fastboot works or you need OxygenOS fastboot images ? This is the thread for you !!
Download Fastboot Image from here :- https://mega.nz/#!itR00ZaI!gJ6T0jgqfZaIF9NLlCzWj4LIGMMhCw8m8owFdeB_2B4
Extract the Zip in a folder .
Boot the phone into fastboot.
Run the batch file.
Done.
This method WILL NOT WIPE DATA
If you want to wipe data to,flash userdata.img from here :- https://www.androidfilehost.com/?fid=24052804347833307
Use command
fastboot flash userdata userdata_64.img
Click to expand...
Click to collapse
You need the latest adb/fastboot package to be successful.For that,do this :-
Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only)
Extract the zip and place the android-sdk-windows folder on your desktop.
Go into the android-sdk-windows folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):-
Tools > Android SDK Tools, Android SDK Platform-tools- Extras > Android Support Library, Google USB Driver
Click to expand...
Click to collapse
Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If you don't see this new folder, repeat the step above.
Thanks for reading ...
Credits :- @jcespi2005 For making the fastboot zip ... @Naman Bhalla for making the thread and partitions images thread.
Done to @jcespi2005 here :- http://forum.xda-developers.com/donatetome.php?u=281521
Donate to me here :- http://www.amazon.in/gp/registry/wishlist/1X55WMSVTW3KW/
Thanks again. !!
This method has been tested successfully by atleast 2 people ,including me
This img is oxygen os 2.1.1?
Sent from my Nexus 5 using XDA Free mobile app
matitorres07 said:
This img is oxygen os 2.1.1?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Correct
DEAD
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
S0ad113 said:
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
Click to expand...
Click to collapse
i've got the exact same problem. Let me guess: your bootloader is locked?
anyways, try this: press POWER + VOLUME UP until you're in fastboot mode. connect the OP2 to your PC and execute the command 'fastboot continue' in a cmd window. if not, repeat until it works. your phone should boot like normal, you can't restart or shutdown though, since you'll be stuck in the same loop again.
at least that's my problem. can't flash anything since bootloader is locked, ADB does work fine though, as long as the phone is running.
really sucks to need a PC everytime you want to power on your phone.. if anyone can help, i'd gladly appreciate it
S0ad113 said:
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
Click to expand...
Click to collapse
I TRY TO USE TOOLBOX and try to flash..some via CMD But give me error writing "recover" ...Failed Remote: device is Locked. Cannot Flash images)
Helppppppp me
---------- Post added at 11:13 PM ---------- Previous post was at 11:08 PM ----------
rattig said:
i've got the exact same problem. Let me guess: Your bootloader is locked?
Anyways, try this: Press power + volume up until you're in fastboot mode. Connect the op2 to your pc and execute the command 'fastboot continue' in a cmd window. If not, repeat until it works. Your phone should boot like normal, you can't restart or shutdown though, since you'll be stuck in the same loop again.
At least that's my problem. Can't flash anything since bootloader is locked, adb does work fine though, as long as the phone is running.
Really sucks to need a pc everytime you want to power on your phone.. if anyone can help, i'd gladly appreciate it
Click to expand...
Click to collapse
i try all always locked always loop omg
---------- Post added at 11:38 PM ---------- Previous post was at 11:13 PM ----------
Helpppppppppppppppppppppppppppppppppppppppppppppppppppppppp
Please note that on the fastboot userdata command you are missing a letter. You have "fastboot flash userdata userdata_64.img" and it should be fastboot flash userdata userdata_64G.img. Great job by the way, used it to reset the OP2 and works great.
ukcain said:
Please note that on the fastboot userdata command you are missing a letter. You have "fastboot flash userdata userdata_64.img" and it should be fastboot flash userdata userdata_64G.img. Great job by the way, used it to reset the OP2 and works great.
Click to expand...
Click to collapse
I did it..but is not that the problem....the problem is..when i try to flash some...fail always. give the error : device is Locked. Cannot Flash images
REBORN
Solved ty allll
How on earth did you manage to get a fastboot image for the OP2?
Thanks by the way
Stevles said:
How on earth did you manage to get a fastboot image for the OP2?
Thanks by the way
Click to expand...
Click to collapse
Converting the .DAT inside the official recovery ZIP to .IMG format
The rest of partitions are on the fastboot format, so only system and cache needs conversion, and userdata comes from hydrogenOS fastboot package...
jcespi2005 said:
Converting the .DAT inside the official recovery ZIP to .IMG format
The rest of partitions are on the fastboot format, so only system and cache needs conversion, and userdata comes from hydrogenOS fastboot package...
Click to expand...
Click to collapse
Nice
is not flash me the file system.img
i get error message "the app crash" from windows
pls help
Zahi122 said:
is not flash me the file system.img
i get error message "the app crash" from windows
pls help
Click to expand...
Click to collapse
I'm having the same issue
I'll try to do it through TWRP and see if that works for me
Naman Bhalla said:
Hello People !!!
Want to return your OP2 to 100% Stock Factory Image or have you soft bricked OP2 and nothing except fastboot works or you need OxygenOS fastboot images ? This is the thread for you !!
Download Fastboot Image from here :- https://mega.nz/#!itR00ZaI!gJ6T0jgqfZaIF9NLlCzWj4LIGMMhCw8m8owFdeB_2B4
Click to expand...
Click to collapse
Hi,
Are these images from a Chinese, EU or US version of the device?
thanks
Hello all,
is there a new img.image?
I have great problems and need a super clean install included wipe data!!
Thanxx for helping
S5 & One + Boeffla Inside
S0ad113 said:
Solved ty allll
Click to expand...
Click to collapse
How? What did you do different? For me, the fastboot.exe stops working at the below step.
..\fastboot>fastboot flash system system.img
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
avi0889 said:
How? What did you do different? For me, the fastboot.exe stops working at the below step.
..\fastboot>fastboot flash system system.img
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
Click to expand...
Click to collapse
I got the same error at first then I copied all the files into my platform-tools dir that has ADB & fastboot then run it.
Try this tool. It works good for me. But the windows driver for OP2 and the Qualcomm Diagnostic 9006 Driver must be installed.
Sry, can`t post the link. please PN.
Worked great, but it switched my wifi off. Even if I turn it on manually it doesn't show any active networks. I have rebooted several times. Any workaround?
I cant access my recovery but the fastboot still ok. Tried flash using fastboot mode n sp flash tool and everything went fine. But when i switched on the phone, i still get bootloop. Anybody can help? What should i do?
Thanks
Flash stock firmware using sp flash tool. Install drivers, load scatter file in sp flash tool,click download, remove battery frm ur mobile then connect ur mobile to pc by data cable
Done..
Sent from my Nexus 7 using XDA Free mobile app
Abinash12 said:
Flash stock firmware using sp flash tool. Install drivers, load scatter file in sp flash tool,click download, remove battery frm ur mobile then connect ur mobile to pc by data cable
Done..
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the reply.. i've done all the step and the flashing process is successful. But, the bootloop still there
what did you do before, that causes the bootloop ?
dbzgts said:
I cant access my recovery but the fastboot still ok. Tried flash using fastboot mode n sp flash tool and everything went fine. But when i switched on the phone, i still get bootloop. Anybody can help? What should i do?
Thanks
Click to expand...
Click to collapse
Try to flash TWRP 3
Extract twrp.img and rename it to recovery.img
Install xiaomi usb drivers
Extract adb drivers anywhere in your computer
Copy recovery.img ( renamed it to only recovery) into adb tools folder
Boot your phone into fastboot mode by pressing volume down key and pressing power key simultaneously , and then releasing power key .
Connect your Redmi Note 2 to your computer through data cable
Go into adb tools folder => while pressing shift key => right click => and click open cmd here !
Type fastboot flash recovery recovery.img and press enter.
After flashing TWRP through adb flash the lite version http://forum.xda-developers.com/redmi-note-2/development/rom-slimmiui-dev-stable-t3296594
I hope it helps.
coremania said:
what did you do before, that causes the bootloop ?
Click to expand...
Click to collapse
I rooted my phone using kingroot. After that i try to flash twrp using flashify. It booted to twrp when it ask me to reboot the phone. But inside the twrp recovery, the screen hang so i pressed the power button to hard reset the phone. After that I got this bootloop
mihayash said:
Try to flash TWRP 3
Extract twrp.img and rename it to recovery.img
Install xiaomi usb drivers
Extract adb drivers anywhere in your computer
Copy recovery.img ( renamed it to only recovery) into adb tools folder
Boot your phone into fastboot mode by pressing volume down key and pressing power key simultaneously , and then releasing power key .
Connect your Redmi Note 2 to your computer through data cable
Go into adb tools folder => while pressing shift key => right click => and click open cmd here !
Type fastboot flash recovery recovery.img and press enter.
After flashing TWRP through adb flash the lite version http://forum.xda-developers.com/redmi-note-2/development/rom-slimmiui-dev-stable-t3296594
I hope it helps.
Click to expand...
Click to collapse
i saw a successfully flashed using sp flash tool is around 2.04GB but mine only around 1.49GB...so, I think there is something wrong here. i attached the picture below
dbzgts said:
i saw a successfully flashed using sp flash tool is around 2.04GB but mine only around 1.49GB...so, I think there is something wrong here. i attached the picture below
Click to expand...
Click to collapse
Just try the method i posted before,i've had problems like yours on other phones in the last 2 years,and each time i've succeded,just try that method.
mihayash said:
Just try the method i posted before,i've had problems like yours on other phones in the last 2 years,and each time i've succeded,just try that method.
Click to expand...
Click to collapse
Already tried both method. It should all good but dunno why it still got bootloop
mihayash said:
Just try the method i posted before,i've had problems like yours on other phones in the last 2 years,and each time i've succeded,just try that method.
Click to expand...
Click to collapse
I bought this phone one week ago and after a lot of experiments that lite rom and a few modifications i am very satisfied with performance and baterry life,i've noticed that wifi consumption on baterry its smaller,on 3g acceptable,4g draining fast.
---------- Post added at 11:01 AM ---------- Previous post was at 10:58 AM ----------
Also bootloop after flash recovery from adb... strange right?
dbzgts said:
Already tried both method. It should all good but dunno why it still got bootloop
Click to expand...
Click to collapse
you can access recovery after adb flashing ?
---------- Post added at 11:13 AM ---------- Previous post was at 11:07 AM ----------
dbzgts said:
Also bootloop after flash recovery from adb... strange right?
Click to expand...
Click to collapse
very strange,just try to download another stock software,try developer latest one
---------- Post added at 11:15 AM ---------- Previous post was at 11:13 AM ----------
dbzgts said:
Already tried both method. It should all good but dunno why it still got bootloop
Click to expand...
Click to collapse
latest one i've downloaded is miui_HMNote2Global_V7.1.3.0.LHMMICK_8f1ce11602_5.0.zip and it has 934 mb (unzipped)
Have tried v7.1.4 and 7.1.1...
I'll try version v6 maybe later on... hope it works... thanks for the reply @mihayash
still no luck?? any other sugestion guys??
http://forum.xda-developers.com/redmi-note-2/help/hardbrick-phone-t3297163/post64900975#post64900975 may this helps you, strange problem
coremania said:
http://forum.xda-developers.com/redmi-note-2/help/hardbrick-phone-t3297163/post64900975#post64900975 may this helps you, strange problem
Click to expand...
Click to collapse
Still no luck ?... is it possible my emmc corrupt or maybe damaged?
as you used spflashtool, i hope you didn´t format ?
latest one i've downloaded is miui_HMNote2Global_V7.1.3.0.LHMMICK_8f1ce11602_5.0 .zip and it has 934 mb (unzipped)
Click to expand...
Click to collapse
I think this rom has locked bootloader... so if you have working fastboot, try:
fastboot getvar all
Click to expand...
Click to collapse
If you're lucky, among the many lines of output you get will be ones such as:
(bootloader) unlocked: no (bootloader) secure: yes
Click to expand...
Click to collapse
If you have locked bl, try to flash older version of global rom.
maxx_hr said:
I think this rom has locked bootloader... so if you have working fastboot, try:
If you're lucky, among the many lines of output you get will be ones such as:
If you have locked bl, try to flash older version of global rom.
Click to expand...
Click to collapse
No, the bootloader is not locked but the value is not secure
coremania said:
as you used spflashtool, i hope you didn´t format ?
Click to expand...
Click to collapse
I have tried all the 3 options... is that affect my phone if i choose format + download option?