[Q] Antenna flex cable problem - AT&T Samsung Galaxy Note I717

Hello this is my first post I tried looking for a answer but can't seem to find one, last night I changed the charging port in my note and when removing the antenna cable it broke...I tried to repair it but phone had no service I tried looking for a new cable but I can only seem to find them for the n7000 note not mine I was wondering are they the same? they look it on the picture's but I'm not too sure if any one can point me in the right direction I would appreciate thank's!

Does it look like this?
http://www.cellphonerepairshop.com/at-t-galaxy-note-antenna-coax-cable-white/

Yes that's it thank you hopefully it fixes my problem I have herd stories of people claiming it is a hit or miss with charger port's.

You're welcome and good luck.

Related

[Q] HTC HD2 wifi coaxial cable. Where to find one?

Greetings.
Anyone knows where I can find a coaxial cable for the wifi for the HD2?
It's not only nicotine u use, is it. Wat the hell do you mean
If you're thinking of hooking up an external antenna to your HD2, as far as I know you'd have to open up the HD2 and wire on a coax port to the right part of the board, and I've got no idea how to get that working!
If you do manage to do this, let us know how!
Sorry if I've misunderstood your rather strange question!
Did you lose it when disassembling your HD2 or something?
I believe it's just a standard coax cable with u.fl connectors, the problem would be finding one with correct length. eBay has plenty, but they're anywhere from 20 to 50cm - don't really want to try fitting that in a phone...
you can find them at mouser com
i need also one and did some search work
you need i W.FL-2LP-04N2-A-(60) u.fl is a lit bigger.
2lp means two sides connector 04n ticknes 0.83mm, 2 color, (60= lenght)mm.
see also data sheet in table on the side. looks, they sel also just one.
i not alowed to place the link. becourse i am new here.
onlly did not fnd out or the have also female connectors
ewdin said:
Did you lose it when disassembling your HD2 or something?
Click to expand...
Click to collapse
Yup! Correct!
Thank you all for your replies. I did find one on ebay, from a broken one.
I hope he will sent me the right one. If not I'll try ur suggestion Tristan_1. Thx
I was on same situatio with wifi cable. Searched over net and nothing. Looked to here recommended shop too. Price for shpping to europe is 10 times bigger than cable itself.
But i finded on ebay cables to Touch Daimond. On pics they looks same like on hd2. I asked here on touch forum lengts for both cables. They are SAME with hd2 cables. Only difference is that hd2 uses for gps white one' touch black. I opened more 10 hd2 (all from europe). Abot t-mobile i cant say anything.
On ebay i finded many sellers with possible search string: OEM AERIAL ANTENNA WIRE RECEPTION FOR HTC TOUCH DIAMOND
Usually after two week i can finally confirm are these touch diamond cables right ones for hd2 too.
Sent from my HTC HD2 using Tapatalk
Tristan, THANK YOU THANK YOU THANK YOU!
I have been scouring the internet looking for this part and had no idea what to look for so thank you so much for your post. I purchased that part and hopefully I can report back that my phone works again!
.d2onderdelen .nl
i find out, that they have them also. and they sel them in pares. also other part of the hd2
Finally i can CONFIRM that YES wifi/bluetooth antenna coaxial cable is same what used on HTC HD2 (can confirm only EU model). About T-Mobile i cant say.
But GPS cable wich one sell with wifi/bluetooth cable dont fit. Its littlebit longer but short for using on GPS.
This one wich i bought dont had so quality on connectors side (not for many many times connect/disconnect) like original. Yes it was cheap too. But i tested work and signal and there was no loss.
Hope helped now many users who cant find replacment for wifi / bluetooth coaxial cable.
Just try on ebay string OEM AERIAL ANTENNA WIRE RECEPTION FOR HTC TOUCH DIAMOND or just try find spare parts for Touch Diamond. I itself used seller named gsm4world.
ahanssen said:
Tristan, THANK YOU THANK YOU THANK YOU!
I have been scouring the internet looking for this part and had no idea what to look for so thank you so much for your post. I purchased that part and hopefully I can report back that my phone works again!
Click to expand...
Click to collapse
Next time use Thanks button
Anyway, this info was FREE
Tristan_1 said:
.d2onderdelen .nl
Click to expand...
Click to collapse
Thanks but hard to explore site if its only on one lang and you dont know it.
It true that it is a bit hard to read dutch, but easy to find the right phone, and were you have to look for (onderdelen) that are the inner part of the phone
I find out that the coaxial cable are out of the store on the moment. i can not find them Anny more.
TRY HERE
For Coaxial try also parts4repair.com and search for bluetooth antenna and not for wifi (which are the same anyway).
For me the solution of using coaxial from Diamond did'nt work.
Hope this will...
Cheers

[Q] No service after charging port replacement

I have a second hand Galaxy S2 which was unlocked to all networks and randomly the phone would connect to driving mode. I used GoLauncher EX to delete Voice control but then it started showing that it was charging constantly. After a lot of research I found the problem was in the charging port.
I ordered a new charging port online and I've put it in instead of the old one and now the charging problem is gone, but now my phone gets no service on a Three UK sim, I'm quite sure it wasn't on Three UK to begin with.
Is it possible that changing the charging port might have locked the phone to the original carrier again?
and is there anyway to unlock it(without root) or get it working again a different way?
(This is my first post. Forgive me if I've made any mistakes. )
Got quite a few views. Does this mean no one has any idea on what it could be?
Take a look at the antenna wire sometime you touched it and it's not connected properly
Yeah I have seen a lot of people lose signal who replace that port. I'm pretty sure it has something to do with the antenna. Make sure you have knocked it by mistake
Sent from my GT-I9100 using xda app-developers app
I experienced the same problem with my Samsung S2. I had destroyed the charging port by being careless when charging it which meant my phone would not charge at all; although if I was lucky I would get about 10% charge every day.
To resolve the problem, I bought a cheap charging port flex cable off ebay for about £4.00 which I thought was a bargin. After taking the phone apart (with help from a YouTube video) I replaced the port, turned the phone on and it charged perfectly. Then all of a sudden I lost all signal. I moved around the house, hoping to get the slightest bit of signal but no, nothing. I did a lot of research online as to why this has happened and everyone said it was to do with the antenna cable that runs along the left hand side of the phone so my immediate thought was to buy a new one. I did a factory reset to see if that helped but it did not. As I was desperate, the following day I went into town to see if I could find a shop that sold an antenna wire. I went in shop after shop but nowhere sold what I was looking for. I went into a shop and described my problem to the man behind the counter, and he knew exactly what was wrong. On the flex cable there is "REV" followed by a number, and he told me that if the replacement number is not the same as the original then the phone will have no service.
In the photos you will see my original cable that was "REV2.3" and my replacement cable that was "REV2.2".
Long story short... when replacing the charging port make sure the replacement flex cable has the same REV number as the original otherwise you will have no service. Your problem is not related to the antenna wire.
I hope this helps!
solution posted here
http://forum.xda-developers.com/galaxy-s2/help/weak-signal-reception-changing-micro-t1950114/page4

New Charging Port - Still not charging!

Just replaced the charging port on my ATT SGII i777. Still not charging. Any ideas on what to try next?
The charge port I bought was for a i9100 but I was under the impression that they were interchangeable:
I've tried several chargers so I'm pretty sure it is not the charger,
-- Bud
Cable? Have you tried a different charging cable?I know it sounds ridiculous but I remember someone posting that fixed their issue.
Phalanx7621 said:
Cable? Have you tried a different charging cable?I know it sounds ridiculous but I remember someone posting that fixed their issue.
Click to expand...
Click to collapse
Yes. Charger and cables. tried like 4 different one including two samsung ones.. I also plugged it into the computer and it is not detected at all.
After my original post, I noticed that my cellular service wasn't working either. Cleaned up the old port with a good dose of rubbing alcohol and a soft toothbrush and put it back in. Charger still not working but the cell service is back.
The markings on both boards say GT-i9100 and rev2.2 but the original says R.B82 and the replacement says says R.B84. I doubt that means anything.
Any other ideas or testing to do? Luckily I ordered an external charger and extra battery so I am not dead in the water.
Just a quick update - I bought several other charging ports before I finally found one that works. The one that worked was on ebay from muchbuy-outlet. I emailed them prior to purchasing. They said it would work and it did. Here is the link will expire at some point...
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
I tried this one from ebay and it did not work (can't post link so it's ebay item # 330880743336
Im thinking of trying the one you linked. Could I ask when you bought your GS2? I got mine about a mnth after it came out. If you got yours at the same time maybe ill take the risk of buying another board.
changes13 said:
I tried this one from ebay and it did not work (can't post link so it's ebay item # 330880743336
Im thinking of trying the one you linked. Could I ask when you bought your GS2? I got mine about a mnth after it came out. If you got yours at the same time maybe ill take the risk of buying another board.
Click to expand...
Click to collapse
I got mine in the Fall of 2011 right when they came out... -- Bud
you know, I didnt use my i777 for 6 months, and I went to charge it and it wouldnt charge... It would just sit there with the captivate lights blinking rapidly like it wanted to start, and didnt... Long story short, I took the battery out of my i777 and used my t989 as a temporary charger just to get some juice in there (to about 10 %) and switched it back to the i777 and the i777 charged it no problem after that. I think there could be an issue with the i777 firmware which doesnt charge a battery that has gone to complete dead.
I have no issues charging or connecting to adb now
ssmr2t said:
you know, I didnt use my i777 for 6 months, and I went to charge it and it wouldnt charge... It would just sit there with the captivate lights blinking rapidly like it wanted to start, and didnt... Long story short, I took the battery out of my i777 and used my t989 as a temporary charger just to get some juice in there (to about 10 %) and switched it back to the i777 and the i777 charged it no problem after that. I think there could be an issue with the i777 firmware which doesnt charge a battery that has gone to complete dead.
I have no issues charging or connecting to adb now
Click to expand...
Click to collapse
It is because the usb port that we have on our phone is not that great. Before I got my port fixed by Samsung, it would not be able to charge an empty battery, but now it is fine. Although sometime when the battery get too hot, it just through the phone in a loop of charging just enough to boot then shut down again.
You need I9100 gt model Rev 2.3 to replace sgh i777 At&t usb flex cable.
I just changed mine. Mine was rev 2.3. I got mine ebay at the "Cellphone-Repair-Shop" Search for "usb flex cable i9100 gt" model. It has to be the Gt model and it has to be The rev 2.3. So ask your seller before you buy. I believe the cellphone repair shop only sells 2.3.
I did put the Non-GT model in first because I read several reviews that it would work if I bought it from a specific store. This turned out to be a misplacement of many reviews. I am returning that one tomorrow. The wrong one charged for a day. Then nothing... and it caused all kinds of reception problems. Pretty much made phone useless.
Now with the Gt model in, when I connect to computer (wouldn't work before) it reads in explorer that this is a i9100 gt model phone. I do believe it is the new usb port that causes this to be read as a Gt i9100 and not the warning screen caused by rooting.
I wonder if this will cause any problems when flashing roms or anything else like otg usb mounting.
cduced said:
Just a quick update - I bought several other charging ports before I finally found one that works. The one that worked was on ebay from muchbuy-outlet. I emailed them prior to purchasing. They said it would work and it did. Here is the link will expire at some point...
-- Bud
Click to expand...
Click to collapse
This one also worked for me, thanks Bud!! I also got my phone in Oct of 2011.
when charger plugged in it goes on and off
cduced said:
Just a quick update - I bought several other charging ports before I finally found one that works. The one that worked was on ebay from muchbuy-outlet. I emailed them prior to purchasing. They said it would work and it did. Here is the link will expire at some point...
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
Click to expand...
Click to collapse
Bud,
When I plug in my charger the charging circuit goes on and off. I have a tone that dings once (or makes a "BEDUP' sound) indicating the charger is charging and it sounds like a bell indicating that the charger circuit connects and disconnect even before the BEDUP sound can fully complete! LOL Well instead of just one 'bedup' sound it bedups then bedups again! and again etc. The actual indicator on the battery icon goes on then off in sync to the bedups. I suspect its the dock connector charging port but am not positive. I have two I777's; the second one charges fine with the same usb cable so the cable is ruled out. I also had trouble using ODIN and getting my drivers to load in windows "Intermittently", but only on the SUSPECT I777.
Sometimes I can get it to charge by holding the USB cable either pressed upward or downward but it I change pressure at all it will go out.
Were the actual metal strips on your dock connector worn out? That is what I am thinking my issue is. If so It will require another charging port.
After reading your post an reevaluating my issues I am even more sure it is the charging port, but would appreciate any input you may have about your experience!
Thanks for your input!
cduced said:
Just a quick update - I bought several other charging ports before I finally found one that works. The one that worked was on ebay from muchbuy-outlet. I emailed them prior to purchasing. They said it would work and it did. Here is the link will expire at some point...
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
Click to expand...
Click to collapse
Hey, thanks for the info.
My i777 device has the same issue. But the item in the above link does not ship to my country.
So I checked on ebay for another S2 REV 2.3 usb flex cable and found this.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140959296482
But in the cable you have bought it says "R.CB4 28 GT-I9100 REV2.4" and on my selected cable it says "R.CA4 GT-I9100 REV2.4"
Is that a big difference or should I not worry about it?
Thanks!
MWTTRON said:
Bud,
When I plug in my charger the charging circuit goes on and off. I have a tone that dings once (or makes a "BEDUP' sound) indicating the charger is charging and it sounds like a bell indicating that the charger circuit connects and disconnect even before the BEDUP sound can fully complete! LOL Well instead of just one 'bedup' sound it bedups then bedups again! and again etc. The actual indicator on the battery icon goes on then off in sync to the bedups. I suspect its the dock connector charging port but am not positive. I have two I777's; the second one charges fine with the same usb cable so the cable is ruled out. I also had trouble using ODIN and getting my drivers to load in windows "Intermittently", but only on the SUSPECT I777.
Sometimes I can get it to charge by holding the USB cable either pressed upward or downward but it I change pressure at all it will go out.
Were the actual metal strips on your dock connector worn out? That is what I am thinking my issue is. If so It will require another charging port.
After reading your post an reevaluating my issues I am even more sure it is the charging port, but would appreciate any input you may have about your experience!
Thanks for your input!
Click to expand...
Click to collapse
Sorry I missed this but anyone having this issue should first try cleaning the port with a small brush (soft toothbrush or I used these: http://www.dentek.com/product/144/easy-brush-cleaners/) dipped in isopropyl alcohol. That may help (or not). If that doesn't solve the problem, you are going to need to swap out the charging port. -- Bud
igayan1991 said:
But in the cable you have bought it says "R.CB4 28 GT-I9100 REV2.4" and on my selected cable it says "R.CA4 GT-I9100 REV2.4"
Is that a big difference or should I not worry about it?
Click to expand...
Click to collapse
It was hit or miss for me. I ended up buying tow before getting the 3rd to work. I finally emailed several sellers and bought one from a seller that told me it would work with the AT&T version and luckily it did. -- Bud

[Q] Charging port issues PLEASE HELP!!!!!

Hello, I purchased a i717 off eBay and my luck i figured out after I got it and had no cell signal accept in a few real good hot spots. I figured out the seller replaced the charging port flex cable... I read that the part numbers matter a lot on this phone andhe don't have the original now.... I am trying to get this figured out it as on the case v0.3 so I'm guessing the one I needed is a rev 3.0 and I can't find it anywhere or a rev 2.0 for that matter... So does anyone have any idea how to tell which one i need and do they actually say rev 2, or just the second numbers are different but it says rev1 in the top line.....I've checked the antenna cable and it charges fine..... Please help........ I sold my iPhone 5 and found this amazing phone that I can't use:crying:

The charging current does not pass on average 250mAh

Hello, a friend is having problems charging his "MiPad 4".
We have tested with several cables and several chargers (including the original 5V-2A), but the charging current does not pass on average 250mAh.
I'm sure it's not a ROM problem because it started to happen from one moment to the next.
I have tried several versions of Xiaomi.eu but it does not change anything.
I'm thinking that the board that controls the charge, where the USB-C port is, may have been damaged.
I'm looking for the replacement part but I can not find it (attachment jpg).
Has anyone had this problem or something similar?
Regards!!!
hugomoya said:
Hello, a friend is having problems charging his "MiPad 4".
We have tested with several cables and several chargers (including the original 5V-2A), but the charging current does not pass on average 250mAh.
I'm sure it's not a ROM problem because it started to happen from one moment to the next.
I have tried several versions of Xiaomi.eu but it does not change anything.
I'm thinking that the board that controls the charge, where the USB-C port is, may have been damaged.
I'm looking for the replacement part but I can not find it (attachment jpg).
Has anyone had this problem or something similar?
Regards!!!
Click to expand...
Click to collapse
Hi, I had the same problem and I need to buy this board somewhere.
Could you find it somewhere?
Regards
can someone help me, I need to buy this board
Hi. My new Xiaomi Mi pad4 has the same problem!!! It's charging speed is very very low and the problem is not from charger and cable ( I have tried 5 different and original and working chargers and cables). I had to open my brand new Tablet and noting was wrong. I'm suspicious if this little board which has the type C USB has problem Since when I connect the Tablet to any PC it says that Usb can not be recognized. Can anyone help me to find this little board on internet?? Or any suggestion???

Categories

Resources