I just flashed 3.16 full firmware zip through bootloader My lte is s-off, with lazy panda hboot. Everything seems to have updated correctly. Pri is now 2.97_003, Prl is now 25010 and Baseband is now 1.12.11.1210 but my Build# has not changed from 3.15 to 3.16. Is this a problem or incorrect?
Build number refers to the rom, you updated the firmware
om4 said:
Build number refers to the rom, you updated the firmware
Click to expand...
Click to collapse
So build # is the rom and not related,, excellent. Thank u for such a quick response. Very much appreciated
Related
Hello, i am a newbie in Android so i was wondering if it is possible to flash any custom Kernel on Stock ROM for HTC EVO 3D from Sprint.
I was reading about that this morning but devs do not specify if they are compatible or not. The fact is that i want to flash one of:
*Anthrax Kernel(enables Overclock and USB Host)
*RCMix Kernel(enables Overclock)
In addition i have to mention i have a Rooted EVO via htcdev, and it has hboot 1.50. I downloaded Flash GUI for Flashing Kernels but i am not sure if the kernels mentioned above are compatible with stock ROM. Suggestions are accepted about what is the best Kernel/ROM for my EVO.
Thanks in advance for all your replies.
Aosp Roms get Aosp kernels.
Sense based roms (stock) get sense kernels.
- kernels must be compatible with installed fw radio
(2.08.651.2 & 651.3 have same radio; 2.17.651.5 has new radio & no custom kernels yet b/c kernel source isnt released.)
Some of the 651.5 custom roms (like meanrom) have a few tweaks incorporated with the stock kernel.
So u need to know your fw base to figure out your options.
Sent from my "Up all night, sleep all day" Evo3D via Tapatalk.
mpgrimm2 said:
Aosp Roms get Aosp kernels.
Sense based roms (stock) get sense kernels.
- kernels must be compatible with installed fw radio
(2.08.651.2 & 651.3 have same radio; 2.17.651.5 has new radio & no custom kernels yet b/c kernel source isnt released.)
So u need to know your fw base to figure out your options.
Sent from my "Up all night, sleep all day" Evo3D via Tapatalk.
Click to expand...
Click to collapse
Mmmm. info about phone says the next:
Android Version: 2.3.4
HTC Sense version:3.0
Software Number: 2.17.651.5
Kernel version: 2.6.35.13-g277012f [email protected] #1 SMP PREEMPT
Baseband version: 1.06.00.1216
Build Number: 2.17.651.5 CL245066 release-keys
Browser version: WebKit/533.1
PRI version: 1.42_003
PRL Version: 00350(i am not from USA)
I hope that helps.
luis4ever said:
Mmmm. info about phone says the next:
Android Version: 2.3.4
HTC Sense version:3.0
Software Number: 2.17.651.5
Kernel version: 2.6.35.13-g277012f [email protected] #1 SMP PREEMPT
Baseband version: 1.06.00.1216
Build Number: 2.17.651.5 CL245066 release-keys
Browser version: WebKit/533.1
PRI version: 1.42_003
PRL Version: 00350(i am not from USA)
I hope that helps.
Click to expand...
Click to collapse
You're on the newest baseband/radio, so there aren't any custom kernels that are compatible with what you have (yet)
w0rdOo said:
You're on the newest baseband/radio, so there aren't any custom kernels that are compatible with what you have (yet)
Click to expand...
Click to collapse
Thank you. Is there a way to downgrade the baseband/radio?
luis4ever said:
Thank you. Is there a way to downgrade the baseband/radio?
Click to expand...
Click to collapse
There is a way, but I have no experience with hboot 1.5 so I don't know if you can or not. My guess is if there is a way to downgrade, it would have to be by using an RUU, I'll see if I can help you find an RUU to use.
Note: If you can downgrade via RUU on hboot 1.5, you will lose EVERYTHING. I had to use an RUU to fix some major mistakes I made recently on my phone, and I lost everything, including superuser (i.e. root), but I kept S-OFF
EDIT: You can use an RUU but you have to relock your bootloader to apply the RUU. I'm going off to class now so I can't find the RUU for you now, but a google search for it should give you results. You need the 2.08.651.3 RUU (it should be an EXE file)
w0rdOo said:
There is a way, but I have no experience with hboot 1.5 so I don't know if you can or not. My guess is if there is a way to downgrade, it would have to be by using an RUU, I'll see if I can help you find an RUU to use.
Note: If you can downgrade via RUU on hboot 1.5, you will lose EVERYTHING. I had to use an RUU to fix some major mistakes I made recently on my phone, and I lost everything, including superuser (i.e. root), but I kept S-OFF
Click to expand...
Click to collapse
So, i think it is better to wait some time, maybe in the future the source code will be available and some kernels for this version appear.
luis4ever said:
So, i think it is better to wait some time, maybe in the future the source code will be available and some kernels for this version appear.
Click to expand...
Click to collapse
Yes, I'm just waiting as well, I'm perfectly content with the stock kernel on the new baseband. It's just a matter of time before HTC releases their source code and our wonderful devs can get cracking on custom kernels
w0rdOo said:
Yes, I'm just waiting as well, I'm perfectly content with the stock kernel on the new baseband. It's just a matter of time before HTC releases their source code and our wonderful devs can get cracking on custom kernels
Click to expand...
Click to collapse
Thanks for your help.
freeza has built a stock rom with some tweaks.
Thread and DL located here:
http://forum.xda-developers.com/showthread.php?t=1224659
I'm currently fully updated on the new OTA and running InfectedROM and freezas kernel. This thing cooks.
The kernel is currently locked at 1.2Ghz, but there is a few changes that can be made at the system level to increase that..... I think. I haven't looked into it.
AFuddyDuddy said:
freeza has built a stock rom with some tweaks.
Thread and DL located here:
http://forum.xda-developers.com/showthread.php?t=1224659
I'm currently fully updated on the new OTA and running InfectedROM and freezas kernel. This thing cooks.
The kernel is currently locked at 1.2Ghz, but there is a few changes that can be made at the system level to increase that..... I think. I haven't looked into it.
Click to expand...
Click to collapse
He modded it. Both cores are used. He has a few diff configurations of it. Runs awesome on 2.17 sense setups
Sent from my PG86100 using xda premium
just realised that 1.13 is the ics leak base build.
i'm assuming 2.17 is the gb base build?
thanks, guys...
-77
LLXDA
Yes.! But there is also a SPRINT 1.13 firmware (it was one of the very first one on the 3vo and had hboot 1.4). The new 1.13 is a virgin mobile firmware version
Sent from my PG86100 using XDA
ohhhh...
so, since downgrading i'm probably on the *sprint* 1.13 build since we had to flash the ruu in order to downgrade the hboot.
then, i'll have to ask my original question:
after downgrading i only updated my radio.
before flashing mikvirgin (based on the ics leak) should i have flashed an updated build#?
2.17? although, i think that's gb based, right?
or, can i just leave my base at 1.13 and flash whatever roms i want to?
thanks guys...
I am looking for the 2.17.651.5 with hboot removed (I dont want to lose hboot 1.4)
I used freeza's aio update from here but My firmware is still 1.13.651.7.
It's been awhile since I was at this point. I just got out of the virgin crapware and still trying to get my phone back to normal! lol
But like I said I do not want to lose my hboot 1.40.
Update I believe I found what I was looking for HERE I am just confused on what version to get odex or deodex not sure what the difference is or if it makes a difference if I am going to flash a rom.
I'm thinking you need to do it again. For whatever reason it didn't take. The aio file is what I've used in the past without problem. The second link you posted is for a full rom... That's not necessary if all you're trying to do is update your radio
Yeah I am looking to update my ROM but not my hboot
Sent from my PG86100 using Tapatalk 2
I think you are ok. I went through the downgrade process and used the all-in-one and am showing my build number as 1.13.652.1. My hboot is 1.4 s-off and I have no issues flashing any Ics or GB Rom.
Sent from my ICS 3VO with Tapatalk 2
1.13 and 2.17 are Rom bases, right now you are on 1.13 Rom with the firmware that came with 2.17. Flash a Rom based on 2.17 and your phone will show 2.17 in settings>about phone>software info. however you can see your pri version and baseband version have changed.
mnomaanw said:
1.13 and 2.17 are Rom bases, right now you are on 1.13 Rom with the firmware that came with 2.17. Flash a Rom based on 2.17 and your phone will show 2.17 in settings>about phone>software info. however you can see your pri version and baseband version have changed.
Click to expand...
Click to collapse
Exactly this. The Rom I am on is based on the VM leak, hence the 1.13. Roms labeled 2.17 are based on the last GB ota. I left my firmware and radios on 2.17 since that is the last official Sprint firmware update, but my Rom is 1.13.
Sent from my ICS 3VO with Tapatalk 2
coal686 said:
I left my firmware and radios on 2.17 since that is the last official Sprint firmware update, but my Rom is 1.13.
Sent from my ICS 3VO with Tapatalk 2
Click to expand...
Click to collapse
Yeah, same here.
Since there are so many questions being asked all over the place, I figured I would try to create and update this thread accordingly with links and whatnot from any information that is provided in following posts.
After rooting, and achieving S-Off, what should be flashed?
Radio
PRI
Kernel
Baseband
How?
All contained in below link in one nice update known as the firmware.
You can do this before or on top of an already installed ROM running this base such as Mean ROM 2.6
Newest OTA is 2.13.651.1
Flash newest firmware from here
http://forum.xda-developers.com/showthread.php?t=1859789
2.13.651.1 Firmware Bits
I have done the above steps and my experience is super smooth.
Let me know if I'm missing anything and I'll add it.
newfireorange said:
Since there are so many questions being asked all over the place, I figured I would try to create and update this thread accordingly with links and whatnot from any information that is provided in following posts.
After rooting, and achieving S-Off, what should be flashed?
Newest OTA is 2.13
Flash the newest radio - Latest: 1.12.11.0809 - Improves signal performance and drop problems
I did this
Now I ask this of you:
What else should/can be flashed after achieving S-Off?
PRI?
Firmware (does that even make sense to flash firmware, only to flash a ROM right on top of it)?
After that, then you flash your ROM
Mean ROM is based on the newest firmware. So does that automatically flash the newest files to your phone?
Click to expand...
Click to collapse
No it does not
Sent from the depths of hell
newfireorange said:
Since there are so many questions being asked all over the place, I figured I would try to create and update this thread accordingly with links and whatnot from any information that is provided in following posts.
After rooting, and achieving S-Off, what should be flashed?
Newest OTA is 2.13
Flash the newest radio - Latest: 1.12.11.0809 - Improves signal performance and drop problems
I did this
Now I ask this of you:
What else should/can be flashed after achieving S-Off?
PRI?
Firmware (does that even make sense to flash firmware, only to flash a ROM right on top of it)?
After that, then you flash your ROM
Mean ROM is based on the newest firmware. So does that automatically flash the newest files to your phone?
Click to expand...
Click to collapse
Flashing Mean Rom will update your baseband only. You still need to flash the radios and pri updates yourself.
Sent from my EVO using xda premium
Thank you i will flash the pri. Did the radio already. What is a pri anyway?
Sent from my EVO using Tapatalk 2
I have a rooted AT&T One and applied the 4.3 update as a ROM, like I've done previously and for the radio update a couple months. My wife has a stock One and got the OTA update. I notice that she has a later baseband version than me:
4T.20.3218.13_10.12.1718.01L
Mine is:
4A.17.3250.20_10.40.1150.04L
Is baseband the radios? How can I update the baseband to the latest via a recovery flash? What file should I be searching the forums for?
Thanks,
Steve
StephenMSmith said:
I have a rooted AT&T One and applied the 4.3 update as a ROM, like I've done previously and for the radio update a couple months. My wife has a stock One and got the OTA update. I notice that she has a later baseband version than me:
4T.20.3218.13_10.12.1718.01L
Mine is:
4A.17.3250.20_10.40.1150.04L
Is baseband the radios? How can I update the baseband to the latest via a recovery flash? What file should I be searching the forums for?
Thanks,
Steve
Click to expand...
Click to collapse
Flashable package here http://forum.xda-developers.com/showthread.php?t=2419699
Thanks!