Hi all, I found a defect on my Lumia 920's unibody casing. the top bezel is somewhat loose and it squeaks when the phone is cold and clicks when the phone is warm. I find it very annoying because I like to grab the phone from the top and bottom. here's a video of what I'm talking about:
http://www.youtube.com/watch?v=Vevk0LIlLPo
I already replaced my phone at my Rogers store... you might want to check yours and replace if necessary. I feel the clicking will get ALOT worse in the summer when the weather is hot.
HTCalltheway said:
Hi all, I found a defect on my Lumia 920's unibody casing. the top bezel is somewhat loose and it squeaks when the phone is cold and clicks when the phone is warm.
Click to expand...
Click to collapse
funny you mentioned this, i only just noticed the exact same thing about a week ago....
I had a similar issue with the unibody also.
It make noises when I press between the power and camera button.
I took the phone back to the Nokia Care and after more than a week I went there to have him back but it had the same issue. So I give it back one more time and I'm still waiting....
faeredia said:
funny you mentioned this, i only just noticed the exact same thing about a week ago....
Click to expand...
Click to collapse
digipix said:
I had a similar issue with the unibody also.
It make noises when I press between the power and camera button.
I took the phone back to the Nokia Care and after more than a week I went there to have him back but it had the same issue. So I give it back one more time and I'm still waiting....
Click to expand...
Click to collapse
do you guys all have the black version? I've heard that apparently different colored unibodies also have different stiffness...
also when did you guys buy your phones? build week?
I'm planning on getting a yellow unibody to switch out my black one.. but first I have to guarantee the yellow shell won't make those noises...
thanks for the replies!
I have a very slight click near the top of the phone (but not constantly) and that's it. I have the white version. I won't bother changing it because until I read this thread I can't say I even noticed it.
I got a black one on launch and its quiet. No creaks, squeaks or clicks.
Sent from my RM-820_nam_att_100 using Board Express
I have this effect at right side at the middle and at the top. Won't bother with replacements until it will be getting worse/other defects will appear.
To me it is a minor thing. Also no warranty that new one won't start to click after time.
If you put it in a protector like one should with a 600 dollar phone you won't ever even notice this issue. Plus other than an annoyance it has no affect on the phones function.
mine too
I have a black hong kong version. There's a creak/squeak at the middle left (no button) side. which is little disappointing to me when it's the most expensive phone I bought and build quality was very well reviewed.
Mine does this if I press in the middle of the bottom half of the back. Strange thing is it doesn't always do it, seems a fairly random issue.
Super Chimp said:
Mine does this if I press in the middle of the bottom half of the back. Strange thing is it doesn't always do it, seems a fairly random issue.
Click to expand...
Click to collapse
my old one does different things in different temperature. In freezing temp it's quiet, in room temp it squeaks, after gaming it clicks.
Solarenemy68 said:
If you put it in a protector like one should with a 600 dollar phone you won't ever even notice this issue. Plus other than an annoyance it has no affect on the phones function.
Click to expand...
Click to collapse
Cases and all other protection equipment are extremely annoying, and pretty stupid, too.
Super Chimp said:
Mine does this if I press in the middle of the bottom half of the back. Strange thing is it doesn't always do it, seems a fairly random issue.
Click to expand...
Click to collapse
You know what they say if it does it only when you press on it?:laugh:
HTCalltheway said:
do you guys all have the black version? I've heard that apparently different colored unibodies also have different stiffness...
also when did you guys buy your phones? build week?
I'm planning on getting a yellow unibody to switch out my black one.. but first I have to guarantee the yellow shell won't make those noises...
thanks for the replies!
Click to expand...
Click to collapse
Hello,
I have the yellow version from November last year and I didn't encountered any problem with my phone; I saw a lot of users that have problems and some strange of them but I haven't.
Regards!
Sent from my Lumia 920 using XDA Windows Phone Premium App
I have a red Lumia 920 and I am on my 4th unit because each previous phone has had creaking issues on the body. Now, these haven't been the only issues I have suffered but the others are irrelevant to this thread. It does annoy me. I cringe whenever I picked up the previous phones because of the creaking it would make. It makes the phone feel cheap, and quite frankly it shouldn't and thankfully Nokia agree.
I have had my current phone for a day now and so far no problems have developed so I am hoping for the best.
mine was fine until I dropped it twice in the same day (within about 10 minutes of each other) once on concrete, then for some reason decided to drop it again and it bounced off 3 different objects, since then you can hear a 'click' if I press down on the top of the phone in the centre near the front.
bit miffed as I have a scuffed corner now on an otherwise mint phone, have had it for a good few months tho so the novelty of how shiny and nice it looks has almost worn off
I have the white one, a friend of mine has the black one and has no issues with creaking/clicking on the case, but then he has had a silicon case for it since the day he had it, maybe that's helped?
Well, I have had the phone for 5 days and the squeaking/clicking appeared yesterday. I realized that a part of the body feels "hollow" inside so I proceed to disassembly the unit.
When I take out the cover noticed that in fact there was empty space between the case and the board. I put in some supplement (I had to try with several ones until I found the piece that let me close the phone with no extra effort or excessive pressure). Once I get it right, put the parts toghether again and the squeaking/clicking was gone. Also it doesn't feel hollow like before.
I think is a problem with the material expanding and contracting under different temperatures and because it doesn't have a true anchor to the sides (it goes in and out very easy, no extra seals on the sides). Pretty nasty thing for a High-End device.
PS: My carrier (where I bought the phone) said that it was "normal" and refused to replace the unit. Normal my ass!
Aside from that I'm very much inlove with the 920 and WP8.
Ren7on said:
Well, I have had the phone for 5 days and the squeaking/clicking appeared yesterday. I realized that a part of the body feels "hollow" inside so I proceed to disassembly the unit.
When I take out the cover noticed that in fact there was empty space between the case and the board. I put in some supplement (I had to try with several ones until I found the piece that let me close the phone with no extra effort or excessive pressure). Once I get it right, put the parts toghether again and the squeaking/clicking was gone. Also it doesn't feel hollow like before.
I think is a problem with the material expanding and contracting under different temperatures and because it doesn't have a true anchor to the sides (it goes in and out very easy, no extra seals on the sides). Pretty nasty thing for a High-End device.
PS: My carrier (where I bought the phone) said that it was "normal" and refused to replace the unit. Normal my ass!
Aside from that I'm very much inlove with the 920 and WP8.
Click to expand...
Click to collapse
I hope your supplement is a material that does not generate static electricity. Otherwise your fix may damage the phone beyond repair. Things like paper, cardboard, plastics like bag material that is not treated, cloth, and many others all generate static when in contact with other non conductors like the inside of the phone body. Just a warning from an RMA tech who has seen ESD damage from bad fixes and the customer stuck with a voided warranty.
Solarenemy68 said:
I hope your supplement is a material that does not generate static electricity. Otherwise your fix may damage the phone beyond repair. Things like paper, cardboard, plastics like bag material that is not treated, cloth, and many others all generate static when in contact with other non conductors like the inside of the phone body. Just a warning from an RMA tech who has seen ESD damage from bad fixes and the customer stuck with a voided warranty.
Click to expand...
Click to collapse
Yeah, it was non-conductive material. I sort of a tech guy so I know a little about that. I used something that I commonly use as aislant and vibration cancelling in my PC mods. But thanks very much for the warning anyway. :good:
Following the case, after keep ranting about that flaw with my carrier (and phone vendor) I'm with my second unit now, also yellow. I noticed that the power/lock button is lower that the volume and camera buttons but its not a problem (it is lower compared with the firt unit, if this one was my first surely I was going to think that this was the original design).
I've been looking like a paranoid squizo for other defects but so far, so good.
Pretty lame for a high-end phone and a WP8 flagship. Even if its just a batch. Still,, I freaking love the OS.
Related
I have the XV6800 and noticed that this phone over times developes some screen spots. I have one so far, and on my previous one that I returned (for other reasons) developed one also.
I read a thread on another website that Moguls / Titans develop it too.
Has any one else Developed this? If so is it fixable or is it something that might cause like sometype of recall and issue a fix where we might get phone replacements later on?
i have a light spot about the size a pea in the screens lower left-hand quadrant. It's noticeable it during the verizon boot-up screen with the white background, in word, etc. anything with a white background. Not noticeable if the screen is colored.
I've wondered if this was normal.
mine's got 3 of them now
same here, my burnin spot is also in the lower left-hand corner the size of a pea.
same here, lower left corner is lighter than the rest of the screen...looks like somebody missed something on QA
themoz said:
i have a light spot about the size a pea in the screens lower left-hand quadrant. It's noticeable it during the verizon boot-up screen with the white background, in word, etc. anything with a white background. Not noticeable if the screen is colored.
I've wondered if this was normal.
Click to expand...
Click to collapse
Yes, mine is in the exact same place. I read on another website that it might be an HTC issue because other TITAN's have gotten these spots also.
At first I thought that a picture image was burnt into my screen or that I might have pressed the screen to heavily and damaged it.
This has happened twice. I wonder if there is a fix because this is very annoying especialy when trying to read or watching a video.
Same Here
I have a pc6800 through Alltel and just noticed the same problem three days ago...has anyone spoken with their SP and found out if they are replacing them?
Killroy8868 said:
I have a pc6800 through Alltel and just noticed the same problem three days ago...has anyone spoken with their SP and found out if they are replacing them? I am afraid to take mine in since my all High and mighty Moister sticker now says void even though my phone hasn't been with in 100 feet of water. I find those stickers to be such BS...but that could just be me...I wish I could find some where to buy spare ones..
Click to expand...
Click to collapse
I am not entirely certain but I think the void sticker that is displayed by the battery is for the screw. I mean if you try to unscrew your phone to fiddle with the insides then that voids your warranty. I could be wrong.
The only concern would be that if we where to return the phone to get a replacement one, that we would have to flash our RADIOS and ROMS to stock if any one has flashed them to anything that is not stock.
The stickers on both of my alltel 6800's said void out of the box. Their explaination for this is the when the sticker get wet the words bleed and turn the entire sticker purple. Not sure how accurate the rep was but that is the story for what it is worth.
shayes5 said:
The stickers on both of my alltel 6800's said void out of the box. Their explaination for this is the when the sticker get wet the words bleed and turn the entire sticker purple. Not sure how accurate the rep was but that is the story for what it is worth.
Click to expand...
Click to collapse
Yep..you are right . The void stickers are good until they turn a solid purple or red...weeehhh...I'm goin to go and replace my phone this week will let you know how it goes..and what they say
Yeah, mine's got a spot the size of a small pea in the bottom left-hand corner. Doesn't bother me too much yet though, I've got the insurance so I'll go get it replaced one of these days. For others that have tried to get them replaced, any troubles?
After doing some research on forums I noticed that many people have this problem.
Some say that it might be an issue with the phone heating up, faulty LCD manufacturing, the excess use of the vibration feature and so on......
But It seems that no matter what you ( such as gettting a replacement) your current or new phone might still get these spots.
It seems that not many carriers know about this issue, not even HTC.
So the problem might consist unless it is made known to them so they can create a fix for the new shipment of phones. Or else this will reoccur on the phones they have shipped out already.
It sucks because most of us paid a large amount of money for these devices to have it be faulty( not something that can be fixed via software at this moment). Just my opinion.
Ditto, same spot here. was wondering about the spot for a while. I have dropped mine a million times and thought it was because of that.
would be nice to be able to change it in because of the spot because mine is beat down to the ground like 4 flat tires.
will they give me crap because of how beat up it is?
I know every time I go to Alltel and get a phone replaced via the insurance the first question they ask the Rep at the store is if the phone looks like it has been dropped or if it has water damage....I'm sure that is so they can blame it on the user. As far as the phone being under manufacturer warranty they usually just swap it out for me no questions asked. I just always hate when they open the box infront of me and give nothing but the phone....would be nice to have an extra case and charger...LOL..
anyone know if sprint good about swapping phones and if i should do insurance or manufacturer warranty and if i do insurace can i switch to touch or you can only change phone in first thirty days
i got 2 spots in lower left corner
Me too (x3)
I've been through three Sprint-branded titans because of this. I'm 100% sure it's a design flaw. If we all complain at once, HTC might actually listen and make a titan that doesn't do this!
I also have two pea-sized spots in the lower left quadrant of the screen. Doesn't really bother me though, as I only notice it when the phone is booting up.
I've got 3 spots lower-lefthand corner as well on my Mogul.
I made a poll to actually see the statistics of the effects of these Spots on the TITAN / 6800
Feel free to Vote
Hi all, newbie here
Just received my shiny new S3 this morning and it's beautiful - haven't had a chance to power it up yet.
Thing is, I'm a complete OCD freak when it comes to my gadgets, and I've noticed that on each of the four corners of my handset (on the bezel) there are small lines that appear to be joinery spots, but I'm not quite sure. At first I thought it was a crack but then realised that there are small lines on each corner, which leads me to believe it is joinery and not cracks. The lines are not that visible but if you focus you can spot them.
Sorry to be so OCD but can anyone else confirm this?
Thank you
Yep, mine has the same. Never noticed before.
You b*****d!!! I have noticed it now!!!
I too have OCD........
johnboywilson said:
You b*****d!!! I have noticed it now!!!
I too have OCD........
Click to expand...
Click to collapse
Haha I am sorry! We can all suffer with our joinery spots together haha
me too, think of it as the design
Probly moulding marks
i noticed em on mine as soon as i got the phone! and i dont have OCD ! LOL.
crappy manufacturing process if you ask me! they could could have moulded it in one piece! should have been made out of metal... the bezel at least!
itoYo said:
i noticed em on mine as soon as i got the phone! and i dont have OCD ! LOL.
crappy manufacturing process if you ask me! they could could have moulded it in one piece! should have been made out of metal... the bezel at least!
Click to expand...
Click to collapse
Saw it right from the moment of unpacking, too... and I don't have OCD neither.
But that barely visible and after a few days with the handset, I'm actually glad it's plastic and not metal... It's softer, warmer, and it will actually absorb shocks better, effectively protecting the screen a tad more. And it's moulded in one piece...Only the mould was not in one piece itself
I noticed mine today which led me here. Thing is i saw a post on the net and the guy had one just below home button and cpw changed the phone for him.
Same lines are on the Galaxy Nexus. I never saw them but my friend dropped his phone and thought he cracked it in those 4 spots. Then he asked me to check mine and sure enough, they were there.
Mine too...............
I have also seen those 4 hair line cracks/joints around all corners on my white S3 this morning. Because I already requested for return and refund from eXpansys-usa.com. so before sending then I want to confirm it, Is it normal?. otherwise they will laugh on me.:silly:
I think the 4 corners are normal, but the other random spots aren't. I ordered mine from Expansys-usa.com too. I don't have the random spots, but do have the 4 corners and they aren't like the one in the picture. They are hard to see unless you look for them. Like it's how the phone is put together.
b-eock said:
I think the 4 corners are normal, but the other random spots aren't. I ordered mine from Expansys-usa.com too. I don't have the random spots, but do have the 4 corners and they aren't like the one in the picture. They are hard to see unless you look for them. Like it's how the phone is put together.
Click to expand...
Click to collapse
Thanks Buddy...
Cracks in Plastic around edge on my Galaxy S3
I noticed a crack near where I plug the charger into the phone. At first I thought it was a seam where the plastic came together so I didn't worry about it. Now I have noticed that the phone has developed several small cracks around the edge (near the volume rocker and at the top corner.). I have never dropped it and have always taken care of it.
Today I did a quick search and found that this is a problem others have reported so I gave Sprint a call to find out what could be done. They said to bring it into the closest sprint store which is 70 miles away. The only other option they gave was to call Samsung. So I did.
Samsung said they could repair the phone but they needed to take my credit card info and would charge me if it was due to damage and I wouldn't have my phone for over a week! Needless to say I am beyond frustrated. I am a loyal Samsung customer... Have 2 galaxy s2 phones ( for my kids) a Tab2 and just got the Note 10.1. I am even considering upgrading to the note II when it comes out. I am completely concerned about the quality of plastic that they are using in this phone and am reconsidering my loyalty.
Guess I have to take it back to sprint when I am close to their store to get anything done without having to give a credit card or be phone less for a week! What a pain in the arse! Should I un-root my phone before doing this to avoid the inevitable "warranty" - issue?
Are there others that have noticed these cracks and gotten any resolution from Samsung or their carriers?
Mine has a crack
sav_uk said:
Hi all, newbie here
Just received my shiny new S3 this morning and it's beautiful - haven't had a chance to power it up yet.
Thing is, I'm a complete OCD freak when it comes to my gadgets, and I've noticed that on each of the four corners of my handset (on the bezel) there are small lines that appear to be joinery spots, but I'm not quite sure. At first I thought it was a crack but then realised that there are small lines on each corner, which leads me to believe it is joinery and not cracks. The lines are not that visible but if you focus you can spot them.
Sorry to be so OCD but can anyone else confirm this?
Thank you
Click to expand...
Click to collapse
i was just wandering never dropped the phone so how could it break but i even saw it with a magnifying glass it is surely a crack
gotta complain samsung to use such a cheap quality product
picked up my phone earlier this afternoon, (preorder 32gb) 1st im told that my wireless hdmi will arrive at a later date, when i open up my box once im home i see that the top speaker grill did not adhere properly. only half of it is sitting right (camera side) but the half with the sensors is floating ever-so slightly. i am in love with the phone but this is really bothering me. i can clearly see the red adhesive and some is even on the side of the phone. after a quick phone call to at&t i was told i can go back to the store i which i pre-ordered and recieve a new phone.
picture with the headphone port shows a normal adhered corner and the other shows the gap on the grill
Has anyone else had a problem like this?
so take it back get it replaced
ofcourseimnaked said:
picked up my phone earlier this afternoon, (preorder 32gb) 1st im told that my wireless hdmi will arrive at a later date, when i open up my box once im home i see that the top speaker grill did not adhere properly. only half of it is sitting right (camera side) but the half with the sensors is floating ever-so slightly. i am in love with the phone but this is really bothering me. i can clearly see the red adhesive and some is even on the side of the phone. after a quick phone call to at&t i was told i can go back to the store i which i pre-ordered and recieve a new phone.
picture with the headphone port shows a normal adhered corner and the other shows the gap on the grill
Has anyone else had a problem like this?
Click to expand...
Click to collapse
Very similar to mine but not quite as bad as what your pic shows. I decided not do anything because it is purely a cosmetic issue and you have to look really hard on mine to see it plus all my parts are aligned spot on so everything is flush with no over hang. If I had yours I would take it back to the store and demand another 32 GB asap. They should have em. 64 GB will take some time to reach stores so I may decide later to exchange.
You have a one year warranty so you could wait too. Remember iPhone 5 had similar quality issues at launch.
Lol, I'm just waiting for mine to come in. I presume I will get one that has a perfect body, but a dead pixel or two, I will then return it for one with a flawless screen, but screwed up body, and then be forced to live with it.
I went to a store to buy mine and made them open the box before I took it
Sent from my M7 using Tapatalk 2
ofcourseimnaked said:
picked up my phone earlier this afternoon, (preorder 32gb) 1st im told that my wireless hdmi will arrive at a later date, when i open up my box once im home i see that the top speaker grill did not adhere properly. only half of it is sitting right (camera side) but the half with the sensors is floating ever-so slightly. i am in love with the phone but this is really bothering me. i can clearly see the red adhesive and some is even on the side of the phone. after a quick phone call to at&t i was told i can go back to the store i which i pre-ordered and recieve a new phone.
picture with the headphone port shows a normal adhered corner and the other shows the gap on the grill
Has anyone else had a problem like this?
Click to expand...
Click to collapse
mine has a very slight gap, similar to yours on the right side, except mine is more uniform. I think it's the fact that it's glued on. personally I'm not worried, but yeah if it bothers you go demand another one. they promised you zero gap construction, if you don't thin theyve met that promise you go back till you get one that does bro.
Guys, anyone has dead pixels on their Ones? Got them on two of mine....any idea how many considered defective by HTCs standards?
Sent from my HTC One X+ using Tapatalk 2
I called AT&T and they told me to go to my nearest store and they would replace it, even if it were a minor cosmetic defect it would still worry me. Even the slightest bit of water could go in through a gap like that and damage anything or even worse activate a water strip forcing you to go through Insurance for such a new phone. They were pleasant and accommodating over the phone, I'm glad it was an easy fix.....
Now I'm just sitting here staring at the phone, it makes no sense to do anything software wise to it because I'm going to return it in the morning..... No fun for me today
Dottcent said:
Guys, anyone has dead pixels on their Ones? Got them on two of mine....any idea how many considered defective by HTCs standards?
Click to expand...
Click to collapse
Not sure about HTC but AT&T will exchange it for you..
Dead pixels is a definite return in my book.
Wow!!I was wondering it's only me or a wide spred issue. Now I know it's not just me. My phone looks perfect at the top but the bottom has imperfections. There is a very slight gap and I can feel the ups and downs when I move my finger around the edges. I think I should go to AT&T sore and see if the replace it.
Dottcent said:
Guys, anyone has dead pixels on their Ones? Got them on two of mine....any idea how many considered defective by HTCs standards?
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
I had the same issue with mine, and the store manager said he would only exchange it if it had three dead pixals. The phone had about five dead pixals but in two different clusters which made it seem like only two pixals, due to the high dpi. The store manager than called att and asked what he should do because he was only able to see two dead spots/pixals. They probably told him it was up to him and that the defective pixals should be clearly seen with the naked eye. He refused to exchange it because he felt uncomfortable not being able to see more than two dead spots/pixals. I tried a different store with much success. Probably because the store manager was so understanding of the issue.
I went to the store and replaced mine. The first one they showed me has the same issue (uneven flow of construction with the bottom speaker top) and pulled another one which still suffers with similar issue but not that evident. I took the second one and left. It looks like the bottom part of the phone is little complex and very wide spread build issue with these phones.
rajbsn said:
I went to the store and replaced mine. The first one they showed me has the same issue (uneven flow of construction with the bottom speaker top) and pulled another one which still suffers with similar issue but not that evident. I took the second one and left. It looks like the bottom part of the phone is little complex and very wide spread build issue with these phones.
Click to expand...
Click to collapse
I've looked at many phones. I have yet to seen one without the small gap. It seems that only some have smaller gaps than others. But make sure your speaker grills are at least align correctly.
Sent from my HTC One using Tapatalk 2
Dreadsteel said:
I've looked at many phones. I have yet to seen one without the small gap. It seems that only some have smaller gaps than others. But make sure your speaker grills are at least align correctly.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Their Display phone was perfect. It looks like they are displaying Apples and selling Oranges.
hey i was finally able to recieve a new phone, i walked into my local at&t and spoke to a rep. i was reffered to the assitant manager who looked at his own phone and refused me a replacement phone. i pressed him and gave my phone to the store manager who only agreed to give me a new unit once she saw the red adhesive showing on my top speaker grill. i went and looked at every display model they had, bottom grill on the phone shows a miniscule gap towards the center of the device. speaker grill on top also shows a gap that is more prominent towards the ir blaster. Not sure if this is normal but i will try to visit other locations even a sprint or t-mobile store and look at the build quality on their versions and take pictures to compare. im not too sure of why something like this should happen, but my 1st guess would be an unlevel surface underneath most likely from the injected plastic... i really hope it isnt, such a beautiful phone. something like this should not have a rushed manufacturing process.
About the gap, I got 3 Ones from Att and they all got tiny gaps, but seem to be glued tight, but I mostly looked at uneven speaker grills and screen, since all had some!
Ps, Double Dip is lovely case, got one with the purchase
Every single One we have sold at my store has has zero gap. I've made it a point to look at each one.
Sent from my HTC One X using xda premium
CraigP17 said:
Every single One we have sold at my store has has zero gap. I've made it a point to look at each one.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I just got my "baby" yesterday. And with trying to entertain a 1 year old with a slight head cold, plus do all the data transfers from my One X+ to this one, I never thought to actually look the thing over. But I'll be darned, after reading the first few posts just now, I took my case off and yep, there is an ever so slight defect as well. Their not gaps..but a slight "wavelike" unevenness all around. I have very sensitive tactile sensations in my fingers, so i can feel roughness on certain spots. Trying not to let it bother me, but my neuroticism is trying to kick in.
davidper said:
I had the same issue with mine, and the store manager said he would only exchange it if it had three dead pixals. The phone had about five dead pixals but in two different clusters which made it seem like only two pixals, due to the high dpi. The store manager than called att and asked what he should do because he was only able to see two dead spots/pixals. They probably told him it was up to him and that the defective pixals should be clearly seen with the naked eye. He refused to exchange it because he felt uncomfortable not being able to see more than two dead spots/pixals. I tried a different store with much success. Probably because the store manager was so understanding of the issue.
Click to expand...
Click to collapse
Really, they refused you an exchange? When I had my Optimus G, they exchanged it for me because it got too hot. If you get a new device and it has dead pixels, they should not be able to refuse service. Dead Pixels should not be a standard.
rajbsn said:
Wow!!I was wondering it's only me or a wide spred issue. Now I know it's not just me. My phone looks perfect at the top but the bottom has imperfections. There is a very slight gap and I can feel the ups and downs when I move my finger around the edges. I think I should go to AT&T sore and see if the replace it.
Click to expand...
Click to collapse
Mine is fine, I don't think this is WIDESPREAD issue.
Just a quick question. Anyone else have an issue with their screen cracking? My P9000 has developed a crack over the led. I didn't drop, knock or bump the phone. I've emailed support for advice. I'll keep this forum posted.
Update got a very prompt response. Two sentences
"Good day!
we are sorry to hear that, but screen will not crack by itself. it may have some physical damage on it."
No details of how to get a repair, that's it! Not the best customer service. I've replied enquiring about service centres, costs etc. and will update the post when I get more info. There are a few posts asking for similar details re. Screen replacement so the info will be useful for the community.
actually it's strange to think that a screen can brake by itself , can you post some pictures?
elephone customer care have already proved it's lower quality service . i don't know where you live but best solution imho is to give the phone to a local cinese phone repair shoop , here in my city there are a couple that repair - fix phones for low money and they also provide spareparts that arrive very quick and at low price thanks to it's black market channel, try to search one
I agree it's very unusual that the screen would break in this way, but I'm really very careful with all my devices and this has never happened before.
If Elephone say that this cannot happen then I'm not going to quibble, I'm more interested in repairing the phone. Sending it back to the seller for repair will be an interesting, long and probably prohibitively expensive process, but I'll make enquiries.
In other news Elephone are still working on a new ROM for the device, I took the opportunity to ask supplementary questions in my email :laugh: so the chatter on the forums about the 19/04 build being the last one can abate for a while.
The crack in question. Doesn't impair functionality and there's are no signs of impact
The only replacement display I found on the Web is this one https://m.aliexpress.com/item/32673463140.html Unfortunately I have no clue if this is an original display and if could place it on my phone by myself
Your phones has physical damage along the bottom side of the metal frame can clearly see where its been scraped. You sure it didn't drop or get dragged along something while face down? Hopefully there's an OEM replacement as its just the glass that seems to be damaged not the LCD
Thanks I wouldn't know how to even begin the repair but it's useful info.
I had a similar small crack appear on mine which had not been dropped I assumed it had been knocked whilst in my pocket, But then today i put my phone in my pocket to drive and collect the kids when i got to the school i had 3 additional cracks I assume its something to do with the size of the screen and it not flexing.
The new cracks now make it pretty tough to use the phone as they are affecting the touch functions, once i can unlock it i will take some photos to post.
Banathe said:
I had a similar small crack appear on mine which had not been dropped I assumed it had been knocked whilst in my pocket, But then today i put my phone in my pocket to drive and collect the kids when i got to the school i had 3 additional cracks I assume its something to do with the size of the screen and it not flexing.
The new cracks now make it pretty tough to use the phone as they are affecting the touch functions, once i can unlock it i will take some photos to post.
Click to expand...
Click to collapse
Thank you. I'd almost convinced myself that I must have knocked the phone.
Events have taken a new turn. The left hand side of the screen now creaks and pops when you press on it. If I press sufficiently hard enough it stops creaking and popping, almost as if it is correctly seated again only to literally and audibly pop out again 5 minutes later.
I will post a video later, and will be contacting elephone with evidence that there is a design flaw with the device. I'll keep this forum updated on my progress.
thats weird thats where my spontaneous crack started images attached, the bottom one is under the glass but i think was the cause of the left side one.
Adding images as attachments as well given the URLS don't seam to be showing correctly.
Mine also has a minor crack on the screen, it's in a case and has not been dropped. There is no damage to the frame at all, I'm guessing it's from being in my pocket. The phone obviously isn't as strong as mainstream manufacturers. My crack is very faint in the top right corner and you really have to look at it in a certain light to see it.
If it gets worse, I'll buy a new phone (One Plus 3) and not look at this device again
Sent from my P9000 using Tapatalk
Mine broke in my front pocket without impact. It was the aluminium frame that was bending and must have cracked under the stress. In hindsight I should have started putting the phone in my pocket the other way around. Ha ha!
YorkshiresSnipper said:
Mine broke in my front pocket without impact. It was the aluminium frame that was bending and must have cracked under the stress. In hindsight I should have started putting the phone in my pocket the other way around. Ha ha!
Click to expand...
Click to collapse
I note the replacement screens have come down in price I may have to have a go at a repair.
Sent from my Z2 Plus using Tapatalk
Breaking: Samsung Galaxy S23 Ultra UK units have screen defects, Samsung replied - SamNews 24
Samsung has recently launched the Galaxy S23 Series and some users started reporting that the screen of the ... Read more
www.samnews24.com
https://twitter.com/i/web/status/1625432044581822464
Mine unit from Poland also have this... More over i found one redditor that have bended unit.. I put mine on leveled (screen side) surface and also is bended... So meny $ a issues...
Check yours...
I am not going to defend Samsung etc, however if your unit is broken, got defects, or you are not happy with something - just send it back, ask for replacement or just return it then buy new one.
It's not just his... looks like a lamination issue.
Not something you should see on a flagship display.
Rather than owe up to it Samsung is making excuses saying it's normal. Translation: there must be a lot of them with this defect...
Joloxx9 said:
I am not going to defend Samsung etc, however if your unit is broken, got defects, or you are not happy with something - just send it back, ask for replacement or just return it then buy new one.
Click to expand...
Click to collapse
First: If you were read article you will knew that Samsung said it is manufacturing side effect so maybe it is not so obvious to return the unit. The defect is in the same place on all reported phones... Could be hard to get one without it as guy in twitter try 2 times and both have the same issue.
Second: If you were look inside the twitter comments you will see that it is not only uk but also in usa and other regions that are affected.
Third: 23u is my primary phone, so not so easy to just return it and stay without the phone as i also use esim. And more over i can get another unit with the same defect or even they will not accept it as they mention as it is side effect of manufacturing.
Right now it is not disturbing the use of the phone, but as i know it is there it is quite not comfy...
It's really irritating that people look for this nonsense that doesn't affect the functioning of the phone one iota and then share it around and ruin everyone else's enjoyment of their devices.
I can confirm that my US Ultra has this. Never would have seen it if it wasn't pointed out.
aureum said:
First: If you were read article you will knew that Samsung said it is manufacturing side effect so maybe it is not so obvious to return the unit. The defect is in the same place on all reported phones... Could be hard to get one without it as guy in twitter try 2 times and both have the same issue.
Second: If you were look inside the twitter comments you will see that it is not only uk but also in usa and other regions that are affected.
Third: 23u is my primary phone, so not so easy to just return it and stay without the phone as i also use esim. And more over i can get another unit with the same defect or even they will not accept it as they mention as it is side effect of manufacturing.
Right now it is not disturbing the use of the phone, but as i know it is there it is quite not comfy...
Click to expand...
Click to collapse
First - I read it, if you are not happy with the product, don't use it, simple. You still have 14 days to send it back if you are not happy, vote with your wallet.
Second - And? Not sure how big % of phones got that issue, but same as above applies, if people are not happy they should send units back. Maybe then samsung would acknowledge issue.
Third - No one force you to stay without phone, if you sold etc. your previous one or sent it back for trade in, then make a complain to Samsung.
And fourth, if you read my post with understanding you would get that I do not defend them. Sending back bad/wrong/broken etc product is our right, Samsung and S23 is not the only phone on the market, if you have issues with them, than feel free to buy something else.
I was angry with oneplus few years ago and guess what, I am on samsung now.
EtherealRemnant said:
It's really irritating that people look for this nonsense that doesn't affect the functioning of the phone one iota and then share it around and ruin everyone else's enjoyment of their devices.
I can confirm that my US Ultra has this. Never would have seen it if it wasn't pointed out.
Click to expand...
Click to collapse
We should not talk about any issues regarding quality of expensive phone to not irritating ppl? Hmm m ok.
blackhawk said:
It's not just his... looks like a lamination issue.
Not something you should see on a flagship display.
Rather than owe up to it Samsung is making excuses saying it's normal. Translation: there must be a $hit load of them with this defect...
Click to expand...
Click to collapse
If that's what they say and your unit have it, vote with you wallet and send it back, there will be no change when people moan on this forum and Samsung keep their sales.
aureum said:
We should not talk about any issues regarding quality of expensive phone to not irritating ppl? Hmm m ok.
Click to expand...
Click to collapse
This is nothing but people hunting for reasons to dislike the phone. It has zero effect on functionality and you have to really be looking to even see it. It's a nothingburger discovery some iPhone fanboy found and put on Twitter to cause drama.
aureum said:
We should not talk about any issues regarding quality of expensive phone to not irritating ppl? Hmm m ok.
Click to expand...
Click to collapse
The problem is it's not supposed to be there at all. Not on my N10+'s. On a display that's not acceptable. It's a manufacturing defect and right where it's always in your face.
Worse, pretty sure Samsung was aware of this defect but they shipped them anyway. Like a brat they do what they want then make lame bs excuses for their actions. This isn't a injection molding tab Sammy, it's a screw up.
At this point there's no telling if over time it will get worse and/or spread. I'd return it for a cash refund especially at this price point, where the defect is and Samsung's condescending attitude.
but this is only visible with a strong light source, with certain angle of light with screen off. it has no impact on usability. i have seen it in the past on other curved displays
Edited by moderator to correct formatting
I upgraded to s23u with EE and i got it on 13th , 512gb ,green. Everything fine,until 3 days later when i installed a Samsung screen protector on,using a flashlight i was eyeballing for dust particles using a sticker. Right bottom corner i noticed a smudge, wiped off,still there, anyway upon close look ,in certain angle using the flashlight, i noticed this crease/bubble/dent around 4mm in width and 2mm height . To me it looks like a dent inwards rather than a bubble. Checked my pixel 7pro,nothing, checked my missus s21plus(flat screen),nothing, then i remembered i have stashed a galaxy s8(still works a take faster photos than s23u though) anything like this,screen was perfect.
Don't get me wrong, only in bright light ,shining directly on the screen you can see it. The touch screen works perfectly.
I contacted EE, the tech support said it looks like delamination or sort and could spread in time, right ,i said i do like the phone and i would like an exchange. EE delivered next day the replacement, as you guessed, same issue, this time half in size,almost not visible, but because i knew where and how to look ,i spotted it right away. Also very fine crease on the right,but almost not visible(unless you know what to look for).
Can i live with this ,yes i can,do i want to take a risk,thinking that potentially, ot could spread over thetime,hmm ,i don't. Opened a second return.
For ppl who said that this is not a big deal,remember, th ise damn phone is expensive and it should be perfect,like my previous s22ultra amd my 5 years old S8
I attached some photos 1,the first phone and 2
glad i am not that inquisitive otherwise i would still use nokia 3110
My S23 Ultra has it. Then I just realized after a year of using my S22 Ultra that this is the case as well... Guess it doesn't really matter.
nawat said:
My S23 Ultra has it. Then I just realized after a year of using my S22 Ultra that this is the case as well... Guess it doesn't really matter.
Click to expand...
Click to collapse
even my old S8 has it
EtherealRemnant said:
It's really irritating that people look for this nonsense that doesn't affect the functioning of the phone one iota and then share it around and ruin everyone else's enjoyment of their devices.
I can confirm that my US Ultra has this. Never would have seen it if it wasn't pointed out.
Click to expand...
Click to collapse
I'm still having trouble seeing it in these pictures, even when it's directly pointed out, lol. I'm not gonna examine my phone. It looks generally fine and I'm gonna stick with it.
aureum said:
We should not talk about any issues regarding quality of expensive phone to not irritating ppl? Hmm m ok.
Click to expand...
Click to collapse
I think the issue is that most people wouldn't even notice if someone didn't point it out to them in special lighting. I think you should be able to discuss and point out anything you deem flawed. But on the other end you should also expect pushback from people who think you are just being spoiled when you have the option to return it. I have noticed it on my Galaxy S23 Ultra US version but only by looking at it in lighting. I think the device is fantastic and even with that little flaw I will keep my device since I can't really notice it since I have a case on it.
catalin78 said:
I upgraded to s23u with EE and i got it on 13th , 512gb ,green. Everything fine,until 3 days later when i installed a Samsung screen protector on,using a flashlight i was eyeballing for dust particles using a sticker. Right bottom corner i noticed a smudge, wiped off,still there, anyway upon close look ,in certain angle using the flashlight, i noticed this crease/bubble/dent around 4mm in width and 2mm height . To me it looks like a dent inwards rather than a bubble. Checked my pixel 7pro,nothing, checked my missus s21plus(flat screen),nothing, then i remembered i have stashed a galaxy s8(still works a take faster photos than s23u though) anything like this,screen was perfect.
Don't get me wrong, only in bright light ,shining directly on the screen you can see it. The touch screen works perfectly.
I contacted EE, the tech support said it looks like delamination or sort and could spread in time, right ,i said i do like the phone and i would like an exchange. EE delivered next day the replacement, as you guessed, same issue, this time half in size,almost not visible, but because i knew where and how to look ,i spotted it right away. Also very fine crease on the right,but almost not visible(unless you know what to look for).
Can i live with this ,yes i can,do i want to take a risk,thinking that potentially, ot could spread over thetime,hmm ,i don't. Opened a second return.
For ppl who said that this is not a big deal,remember, th ise damn phone is expensive and it should be perfect,like my previous s22ultra amd my 5 years old S8
I attached some photos 1,the first phone and 2
Click to expand...
Click to collapse
return it and get your previous S22 Ultra.
I am not seeing it on mine but I could be blind
duckfart said:
I am not seeing it on mine but I could be blind
Click to expand...
Click to collapse
It's probably present on certain batches; some will have it, others not. A major QC screw up. If the defect was minor you wouldn't be able to see it at all.
This is a defect that could effect the survivability of the glass. Glass is subject to some of the laws of hydrodynamics. This deformity causes new stress points. It may not crack there but in another area of the display, hydrodynamics. Glass is a peculiar substance with bizarre properties. Of course if it breaks Samsung will say it's your fault for dropping it.
DON'T SAY YOU WEREN'T WARNED