I had my XT910S (Korean XT910) bricked somehow and I decided to delete CID partition.
Korean fastboot file and SBF file haven't leaked yet, so I need to delete CID partition and flash other region fastboot file.
I successfully flashed Chinese and Brasil fastboots, but I failed to flash Europe one.
When I try to flash Europe one (by RSD Lite of course), It immediately fails at the first step (I think it was cdt.bin flash failed)
I thought if I delete CID partition, I could flash fastboots of any regions! Why can't I flash Europe fastboot?
Zim Hack said:
I had my XT910S (Korean XT910) bricked somehow and I decided to delete CID partition.
Korean fastboot file and SBF file haven't leaked yet, so I need to delete CID partition and flash other region fastboot file.
I successfully flashed Chinese and Brasil fastboots, but I failed to flash Europe one.
When I try to flash Europe one (by RSD Lite of course), It immediately fails at the first step (I think it was cdt.bin flash failed)
I thought if I delete CID partition, I could flash fastboots of any regions! Why can't I flash Europe fastboot?
Click to expand...
Click to collapse
Hey dude, You alredy put the CID back?, I deleted my CID without make a backup, And my razr gone, just BP Tools, Can halp me?
Giorge Passos said:
Hey dude, You alredy put the CID back?, I deleted my CID without make a backup, And my razr gone, just BP Tools, Can halp me?
Click to expand...
Click to collapse
I'm sorry, but u can't put ur CID back unless u made a backup. The only way to boot normally (not BP Tools-boot) with CID erased is to install BootManager which is in Play Store (need root). If u install it, u can boot normally from now on.
Related
Do not use anymore, there is a full SBF available. Flash using RSD Lite or via moto-fastboot.
This is the official ICS OTA update for the NonEFIGS region.
By means of spoofing firmware version as 651.167.21.XT910.NonEFIGSRetail.en.EU in build.prop user mbartosik managed to download 672.180.41.XT910.NonEFIGSRetail.en.EU OTA update from the QA environment.
If you want to thank user mbartosik, please go to this post and press "Thanks" button.
Download:
URL: Blur_Version.651.167.21.XT910.NonEFIGSRetail.en.EU .zip
MD5: c57e495e901f58b0a070bd57c53eb397
Installation:
If you're on a GB build other than 651.167.21.XT910.NonEFIGSRetail.en.EU, flash this SBF prior to continuing with this OTA update. It is recommended to reset the phone to factory defaults in order to avoid FCs and battery drain.
If you're on a clean (no root, no modifications to the system partition, stock recovery) 651.167.21.XT910.NonEFIGSRetail.en.EU (GB 2.3.6), drop the update onto your external microSDHC card, go to recovery and proceed with update. It is recommended to reset the phone to factory defaults in order to avoid FCs and battery drain.
If you're on an ICS leak:
Put the update in your external microSDHC card.
Reboot to AP Fastboot.
Flash this kernel (also courtesy of user mbartosik): moto-fastboot flash boot boot_new_41.img
Flash system_signed from this SBF (unzip it): moto-fastboot flash system system_image
Reboot to recovery, wipe cache and proceed with update.
Note: Only use moto-fastboot in order to avoid preflash validation error when flashing the GB 2.3.6 system_signed.
Bugs:
Apps which use extended GPS commands (e.g. GPS Test and GPS Status & Toolbox) won't report visible satellites etc. This can be fixed by flashing newer U_04.12.00R radio image (again, courtesy of user mbartosik) using BootMenu Manager recovery. Beware, this may impact your 2G, 3G, WiFi and Bluetooth performance - in case of problems, you can revert to U_04.10.00R radio which is shipped with this update by flashing this image (as usual, courtesy of user mbartosik).
Original thread (contains screenshots): http://forum.android.com.pl/f472/wy...d-date-mon-jul-16-11-15-45-cst-2012-a-203392/
Can someone tell us the languages that are included? Much appreciated!
So is this supposed to be the "official ICS"? thx Vatazhka
how do we install it if we are on eclipse or some other custom rom?
romdroid. said:
So is this supposed to be the "official ICS"? thx Vatazhka
how do we install it if we are on eclipse or some other custom rom?
Click to expand...
Click to collapse
you must install service soft by rsd (ICS) and go to second point of OP
for autor
If we are to charge any leaks ICS fastboot package for 651.167.21.XT910.NonEFIGSRetail.en.EU, we also need EternityProject's FastBoot flashME
romdroid. said:
So is this supposed to be the "official ICS"? thx Vatazhka
how do we install it if we are on eclipse or some other custom rom?
Click to expand...
Click to collapse
I only set up the thread - all kudos to mbartosik for pulling the OTA and sharing the patched kernel.
I'm not sure which partitions are being modified by custom firmwares, so flashing the ICS SBF prior to proceeding with the new kernel and GB system might be a safe bet. In theory, you should then flash the attached kernel and 2.3.6 system image, then apply OTA from the stock recovery. However, I stumbled upon preflash validation error when trying to flash system from NonEFIGS 2.3.6 over the leaked 676.226.3.
With regard to FlashME.bat - I don't use Windows. The FlashNIX.sh seems to be a clone of tools shipped within the ICS SBF. I will publish step-by-step tutorial once I get over the preflash validation error.
Sent from my XT910
The steps are really simple to do.
You just need an working ADB on your PC
Fastboot flash boot boot_new.img
Fastboot flash system system_signed
Boot in Recovery, wipe data & cache and apply the update.
All you guys need is the system signed of the based GB Fastboot and the linked boot.img :thumbup:
Sent from my CustomiZed XT910
Is it possible to update to this version from 651.73.30.XT910.NonEFIGSRetail.en.EU (2.3.5)? This is the latest officialy available (non-branded) version in my country (Czech Republic). Thx for the answer.
aaatoel said:
Can someone tell us the languages that are included? Much appreciated!
Click to expand...
Click to collapse
Dansk
Deutsch
English (U.K. & U.S)
Espanol (Espana & Espados Unidos)
Greek
Francais (Canada & France)
Italiano
Nederlands
Norsk bokmal
Polski
Portugues (Brasil & Portugal)
Suomi
Svenska
Turkce
HSD-Pilot said:
The steps are really simple to do.
You just need an working ADB on your PC
Fastboot flash boot boot_new.img
Fastboot flash system system_signed
Boot in Recovery, wipe data & cache and apply the update.
All you guys need is the system signed of the based GB Fastboot and the linked boot.img :thumbup:
Click to expand...
Click to collapse
Well, ADB in this context is only useful to enter AP fastboot mode... I followed this procedure using fastboot binary from the ICS SBF, but an attempt to fastboot flash system system_signed gave me preflash validation error (And yes, I was using the correct SBF.) - any suggestions?
Edit: It seems that the fastboot binary bundled within ICS SBF file is defective. I used moto-fastboot binary from this post and successfully flashed system image!
Besides that, how to update the recovery? Is partition dump the only way?
It should be the same procedure, like we used on EU Leaks. Only the Files have to be changed.
http://forum.xda-developers.com/showthread.php?p=28006523
Sent from my CustomiZed XT910
Can someone tell me what are the differences between 676.226.3.XT910.Retail.en.EU and 672.180.41.XT910.NonEFIGSRetail.en.EU (except numbers, date build, localization and preinstalled apps)? Your feelings in use, speed, smooth or that is something working or not.
I am on retail.en.eu ICS 4.0.4... Is there way to install non EU on my RAZR via fastboot? Or any other? Default ROM in my RAZR was nonEU 2.3.6, so I want to switch to nonEU again. With official ICS nonEU my warranty will back
do u think there will be a fastboot file availabe so we can flash it?
febanovsky said:
I am on retail.en.eu ICS 4.0.4... Is there way to install non EU on my RAZR via fastboot? Or any other? Default ROM in my RAZR was nonEU 2.3.6, so I want to switch to nonEU again. With official ICS nonEU my warranty will back
Click to expand...
Click to collapse
Υes you can, its easy (already done it) :
See the video and follow the instructions steb by step
http://www.youtube.com/watch?v=aCyJcMTwMt8&feature=plcp
But you need to change some files (3&4).
So, the correct files that you will need are:
1) http://forum.xda-developers.com/attachment.php?attachmentid=1080638&d=1337846142 (extract to desktop)
2) SPDREM_U_01.6.5.1-167_SPU-15-M2-1-CEE_1C.91P_0A.6C_RTCEE_CFC_HWp2b_SIGNED.xml.zip (Europeans NonEFGIS) from here: http://sbf.droid-developers.org/umts_spyder/list.php (you will need system_signed archive, copy to desktop )
3) https://hotfile.com/dl/167461766/1e24d34/Blur_Version.651.167.21.XT910.NonEFIGSRetail.en.EU.zip.html (copy to external sd)
4) http://www.mediafire.com/?gqq7qm6j0nq6mmf (rename it: boot_new.img & cope to desktop)
You will need those commands cmd (you can copy and paste)
cd desktop
eprj-mfastboot flash boot boot_new.img
eprj-mfastboot flash system system_signed
(thanks to frastgr)
Vatazhka said:
Well, ADB in this context is only useful to enter AP fastboot mode... I followed this procedure using fastboot binary from the ICS SBF, but an attempt to fastboot flash system system_signed gave me preflash validation error (And yes, I was using the correct SBF.) - any suggestions?
Besides that, how to update the recovery? Is partition dump the only way?
Click to expand...
Click to collapse
fastboot will not work to system_signed
use instead
Code:
moto-fastboot flash system system_signed
Cheers
Edit:
What do we have here?
Moto-fastboot
lol
achillesgk said:
Υes you can, its easy (already done it) :
See the video and follow the instructions steb by step
http://www.youtube.com/watch?v=aCyJcMTwMt8&feature=plcp
But you need to change some files (3&4).
So, the correct files that you will need are:
1) http://forum.xda-developer...8&d=1337846142 (extract to desktop)
2) SPDREM_U_01.6.5.1-167_SPU-15-M2-1-CEE_1C.91P_0A.6C_RTCEE_CFC_HWp2b_SIGNED.xml.zip από εδώ: http://sbf.droid-developer...pyder/list.php (you will need system_signed archive, copy to desktop )
3)https://hotfile.com/dl/167...en.EU.zip.html (copy to external sd)
4) http://www.mediafire.com/?gqq7qm6j0nq6mmf (rename it: boot_new.img & cope to desktop)
You will need those commands cmd (you can copy and paste)
cd desktop
eprj-mfastboot flash boot boot_new.img
eprj-mfastboot flash system system_signed
(thanks to frastgr)
Click to expand...
Click to collapse
I need file from step 3, please
achillesgk said:
Υes you can, its easy (already done it) :
See the video and follow the instructions steb by step
http://www.youtube.com/watch?v=aCyJcMTwMt8&feature=plcp
But you need to change some files (3&4).
So, the correct files that you will need are:
1) http://forum.xda-developer...8&d=1337846142 (extract to desktop)
2) SPDREM_U_01.6.5.1-167_SPU-15-M2-1-CEE_1C.91P_0A.6C_RTCEE_CFC_HWp2b_SIGNED.xml.zip από εδώ: http://sbf.droid-developer...pyder/list.php (you will need system_signed archive, copy to desktop )
3)https://hotfile.com/dl/167...en.EU.zip.html (copy to external sd)
4) http://www.mediafire.com/?gqq7qm6j0nq6mmf (rename it: boot_new.img & cope to desktop)
You will need those commands cmd (you can copy and paste)
cd desktop
eprj-mfastboot flash boot boot_new.img
eprj-mfastboot flash system system_signed
(thanks to frastgr)
Click to expand...
Click to collapse
links from step 1-4 is broken
romdroid. said:
links from step 1-4 is broken
Click to expand...
Click to collapse
found it
link from step 3 in 1 post my mistake - https://hotfile.com/dl/167461766/1e24d34/Blur_Version.651.167.21.XT910.NonEFIGSRetail.en.EU.zip.html
link from 1 step: http://forum.xda-developers.com/attachment.php?attachmentid=1080638&d=1337846142
Thanks, do we still need to download -> " SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Servic e1FF_fastboot.xml.zip" and unpack it as this tutorial? http://forum.xda-developers.com/showthread.php?p=28006523
Because it's stated 2.3.6 I think we will brick, or?
I wonder if it will work because I am on custom rom..?
romdroid. said:
Thanks, do we still need to download -> " SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Servic e1FF_fastboot.xml.zip" and unpack it as this tutorial? http://forum.xda-developers.com/showthread.php?p=28006523
Because it's stated 2.3.6 I think we will brick, or?
I wonder if it will work because I am on custom rom..?
Click to expand...
Click to collapse
My battery is charging (60%), I will try soon.
Ive been finding a solution to unbrick my xt909...,
at first Ive thought that I can flash my device with a xt910 firmware but it came out that Ive bricked my phone
flash failure/boot failure and cannot even access to recovery mode
Here's what I did:
using RSD Lite I flash the device with an empty radio.img to rid out the boot failure and again flash my device using the droid razr utility 1.7
with 6.16.211..., it came out to be successful and now I can manage to boot my device recovery mode...
but... My problem is when everytime I update my device with any 6.16.211 update.zip I get a "signature verification failed"
Help here please
19lilsaiNt68 said:
Ive been finding a solution to unbrick my xt909...,
at first Ive thought that I can flash my device with a xt910 firmware but it came out that Ive bricked my phone
flash failure/boot failure and cannot even access to recovery mode
Here's what I did:
using RSD Lite I flash the device with an empty radio.img to rid out the boot failure and again flash my device using the droid razr utility 1.7
with 6.16.211..., it came out to be successful and now I can manage to boot my device recovery mode...
but... My problem is when everytime I update my device with any 6.16.211 update.zip I get a "signature verification failed"
Help here please
Click to expand...
Click to collapse
I don't know if this is a silly question or not, but did the md5 match before trying to flash the fastboot file?
xt909 completely unbricked
pastorbennett said:
I don't know if this is a silly question or not, but did the md5 match before trying to flash the fastboot file?
Click to expand...
Click to collapse
I really dont know..., but as for now Ive managed to unbrick my xt909 by erasing my CID and flashing another boot image and rom ^^
perfectly running at ICS 4.0.4
I'll post the steps soon....
Nice :good:
Whirleyes bricked his Razr XT909 too
Maybe this would help him
here are the steps
TheBoris said:
Nice :good:
Whirleyes bricked his Razr XT909 too
Maybe this would help him
Click to expand...
Click to collapse
atleast 80% battery
droid rarz utility 1.7
rsd lite
fastboot.exe or any fastboot command line tool
and some patience :laugh:
1st - extract droid razr utility and find the mbmloader named " allow-mbmloader-flashing-mbm"
2nd - enter fastboot and flash the mbm... here's how
( fastboot.exe flash mbmloader allow-mbmloader-flashing-mbm.bin)
3rd - reboot
( fastboot.exe reboot-bootloader)
4th - erase the Contact I.D No.
(fastboot.exe erase cid) (fastboot.exe reboot-bootloader)
of course with a erased CID you'll never be able to turn on your phone into normal mode but still can gain access to fastboot
5th - download and flash the XT912 fastboot file
HTML:
http://sbf.droid-developers.org/cdma_spyder/VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml.zip
6th - just wait and have some coffee
and youre done...,
PLS READ
The only way to power up your phone is by entering BP TOOLS
ONE MORE THING
NOW YOUR XT909 can read local sim's CHEERS FOR THIS
because Im from the philippines and I use locak prepaid sim
Thanks.. It work for me too.
I have flash this file before, but I forgot to boot with bp-tools, that's why I only got black screen
I'm glad for you :thumbup:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
whirleyes said:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
Click to expand...
Click to collapse
is there any way I can flash a new CID? because I forgot to backup my CID...,
so every time I want to open up my device I always go to into BP TOOLS
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
HSD-Pilot said:
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
Click to expand...
Click to collapse
can you pls teach me how to do that?
Thanks to whirleyes for his boot manager..., now I no longer need to go to BP TOOL everytime I want to turn on my phone
can i try it to xt9010??
whirleyes said:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
Click to expand...
Click to collapse
Could you tell me how to do this?
XT909 flash XT910 fastboot file,I think It doesn't work on CDMA net,
Did your work OK?
hi,brother.may i know your prepaid sim card is what?cdma or gsm? thx
could u help me?
hi,19lilsaiNt68.
I have a KDDI IS12M cellphone just like you. And I also bricked it.
In your way,I tried to flash the file "allow-mbmloader-flashing-mbm.bin", but I got a error message said:" INFOimage bigger than partition / Failed". However, the command "fastboot flash mbm allow-mbmloader-flashing-mbm.bin " Can be executed.Then I erased my CID and I tried to flash XT912 fastboot file. In this step:"flash devtree",the screen showed the message:validation failure.
That is my biggest problem and now I don't know how to fix it. Could you help me? Thanks a lot!
Help
HSD-Pilot said:
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
Click to expand...
Click to collapse
Hi, do i need to format my CID is there no way of get a backup, i have done alot on my device that am even i tired. The fast boot also gives the same error " INFOimage bigger than partition / Failed", Can someone just walk us through.
i erased my cid and fastboot with the VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml it worked now am out of fastboot mode, but i get a boot loop. help me
wk4life said:
i erased my cid and fastboot with the VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml it worked now am out of fastboot mode, but i get a boot loop. help me
Click to expand...
Click to collapse
Are you Encode from twit?
The problem is you flashed an ICS Rom. Try that first:
Boot into stock recovery and perform a factory reset. If it boots, ok. If it doesn't boot you should flash Jelly Bean. Just grab that one from VZW at sbf.droid-developers.org.
DON'T FLASH EU JB! Otherwise you won't be able to DOWNGRADE or switch to another region rom because it has the highest secure version compared to all others.
This is VZW JB: http://sbf.droid-developers.org/cdma_spyder/cdma_spyder_9.8.2O-72_VZW-16_1ff.xml.zip
dtrail1 said:
Are you Encode from twit?
The problem is you flashed an ICS Rom. Try that first:
Boot into stock recovery and perform a factory reset. If it boots, ok. If it doesn't boot you should flash Jelly Bean. Just grab that one from VZW at sbf.droid-developers.org.
DON'T FLASH EU JB! Otherwise you won't be able to DOWNGRADE or switch to another region rom because it has the highest secure version compared to all others.
This is VZW JB: http://sbf.droid-developers.org/cdma_spyder/cdma_spyder_9.8.2O-72_VZW-16_1ff.xml.zip
Click to expand...
Click to collapse
That is what i am currently using and i am getting the boot loop back, Yeah this @EnCode_1
I got a boot loop on my XT910S (Korean XT910)
I forgot to install Safestrap and I just installed (/data based) CWM and installed CM10. (yeah I know I'm really stupid)
When I rebooted, CWM was gone and I got stucked on CM10 boot animation...
Because fastboot file and sbf for XT910S (Korean XT910) ARE NOT LEAKED (NOTHING!!!!!), (MOTOROLA, SERIOUSLY?)
I needed to erase CID and flash other region's fastboot file.
So I used these commands :
fastboot flash mbm allow-mbmloader-flashing-mbm.bin
fastboot reboot-bootloader
fastboot erase cid
It succeeded until "fastboot reboot-bootloader"
but failed on "fastboot erase cid"
I have enough battery (Battery OK, OK to program in AP fastboot)
Is it because CID partition for XT910S is different from CID partition for XT910 GSM?
Pls help me!!!! :crying:
-----------SOLVED--------------
How I solved : I just did it one more time, and it succeeded...WTF?! XD
Zim Hack said:
I got a boot loop on my XT910S (Korean XT910)
I forgot to install Safestrap and I just installed (/data based) CWM and installed CM10. (yeah I know I'm really stupid)
When I rebooted, CWM was gone and I got stucked on CM10 boot animation...
Because fastboot file and sbf for XT910S (Korean XT910) ARE NOT LEAKED (NOTHING!!!!!), (MOTOROLA, SERIOUSLY?)
I needed to erase CID and flash other region's fastboot file.
So I used these commands :
fastboot flash mbm allow-mbmloader-flashing-mbm.bin
fastboot reboot-bootloader
fastboot erase cid
It succeeded until "fastboot reboot-bootloader"
but failed on "fastboot erase cid"
I have enough battery (Battery OK, OK to program in AP fastboot)
Is it because CID partition for XT910S is different from CID partition for XT910 GSM?
Pls help me!!!! :crying:
-----------SOLVED--------------
How I solved : I just did it one more time, and it succeeded...WTF?! XD
Click to expand...
Click to collapse
can u explain how you didi it ?
duig said:
can u explain how you didi it ?
Click to expand...
Click to collapse
Like what I said, I just rebooted the phone into AP Fastboot Mode.
And I typed fastboot erase cid, it worked fine.
sorry for the english but i'm italian..i have a big problem with my razr xt910
i have the cid erased and i update do retai eu jb,but i'm very stupid and now i can only boot my phone with bp tool because there is the messagge for the erase cid and the phone worked only in bptool and i can't restore the cid because i've not the root permission.
how can i resolve? thanks
fulvio993 said:
sorry for the english but i'm italian..i have a big problem with my razr xt910
i have the cid erased and i update do retai eu jb,but i'm very stupid and now i can only boot my phone with bp tool because there is the messagge for the erase cid and the phone worked only in bptool and i can't restore the cid because i've not the root permission.
how can i resolve? thanks
Click to expand...
Click to collapse
fastboot flash mbm allow-mbmloader-flashing-mbm.bin
fastboot reboot-bootloader
fastboot flash cid cid.img
My International HOX+ (ENRC2B)
Bootloader unlocked
CWM Recovery installed
Stocked, Rooted
CID HTC_058
Got notified of 4.2.2 Sense 5 Official update.
So I flashed that download update zip file in Download folder via CWM, my bad.
I can't find any matched RUU nor I have any Nandroid backup.
How can I revert my phone back to stock?...
Will that update zip file contain stock boot and recovert .img files?
If so, how can I draw this file via ADB?
Pls help me.
Sent from my C6602 using Tapatalk 4
RE
zeyarwynntun said:
My International HOX+ (ENRC2B)
Bootloader unlocked
CWM Recovery installed
Stocked, Rooted
CID HTC_058
Got notified of 4.2.2 Sense 5 Official update.
So I flashed that download update zip file in Download folder via CWM, my bad.
I can't find any matched RUU nor I have any Nandroid backup.
How can I revert my phone back to stock?...
Will that update zip file contain stock boot and recovert .img files?
If so, how can I draw this file via ADB?
Pls help me.
Sent from my C6602 using Tapatalk 4
Click to expand...
Click to collapse
Hello, what exactly is the problem you are facing? what is the status of the device? Are you stuck in a bootloop? Can you enter bootloader and fastboot?
For that update you have to install Stock Recovery ...
JoHnGr0n3 said:
Hello, what exactly is the problem you are facing? what is the status of the device? Are you stuck in a bootloop? Can you enter bootloader and fastboot?
Click to expand...
Click to collapse
Stuck and Bootloop :[
Notechis said:
For that update you have to install Stock Recovery ...
Click to expand...
Click to collapse
Forgive me.
Pls tell me, Stock Recovery needs to be specific for CID / Firmware version / Region / HBoot ?
zeyarwynntun said:
Forgive me.
Pls tell me, Stock Recovery needs to be specific for CID / Firmware version / Region / HBoot ?
Click to expand...
Click to collapse
If you can access your phone via fastboot then you can revive it pretty quick.
If you cannot, then...... no need to say it
here are the steps to follow if you can use fastboot:
first of all you should prepare your files; you need the drivers for the device, adb and fastboot executable files, a ROM of your choice with the proper boot.img. Once you got those put them in one folder and proceed.
enter bootloader mode (volume down + power)
select fastboot mode
plug your usb cable to your PC
open a cmd window and navigate to your fastboot directory and execute this command: fastboot flash boot boot.img
now you should push a downloaded ROM to your internal sdcard with this command: adb push *here your ROM name.rar or .zip* storage/sdcard0/
if you get an error of not copying, the add a folder for example storage/sdcard0/Download/ or storage/sdcard0/DCIM/
then you can enter recovery and flash your ROM, you should do a wipe and install, then wipe cache and then reboot.
This should put your phone to work with whatever ROM you install, then to get to stock is another process which includes relocking the bootloader.
Please update so I can give you any more help.
NOTE: any rom you download should be compatible with your CID, check it via fastboot with this command: fastboot getvar cid. Also try to download ARHD from mike1986, in his thread you can find compatible CID. If not try to look for a rom compatible with your CID
Hello JoHnGr0n3,
i have same problem.
in phone was stock ROM, unlock bootloader, TWRP 2.6.1.0 (no nandroid backup )
After installing the official update 4.2.2. cant reboot system only white screen with HTC logo
i tried flash Revolution ROM with yours tutorial...
flash via fastboot
boot.img copied and flashed - OK
but i cant copied any file to "SD" card i used command: adb push Revolution.zip storage/sdcard0/DCIM and wrote me: error device not found
any ideas how to copy ROM on storage?
ENRC2B_U
CID: 032
HBOOT: 1.35
Im sorry for my bad English
If you have a zip (rom) file on your pc you can ADB sideload it. and pull out the boot.img of the rom. install the rom. read the fourth post of this
http://forum.xda-developers.com/showthread.php?t=2066390 Threat
I hope it works!
Correct me if i'm wrong!
THX
@hellboysz
Many thanks :victory:
this is working http://forum.xda-developers.com/showpost.php?p=35897893&postcount=4 :good: