guys sorry for this thread but my ROM in xperia mini using Spartan ROM i change into HyperbeamCream but im stock at black screen? i follow the instruction in HyperbeamCream thread. what the right process to make change the ROM?
Be clear...........
gAracUh said:
guys sorry for this thread but my ROM in xperia mini using Spartan ROM i change into HyperbeamCream but im stock at black screen? i follow the instruction in HyperbeamCream thread. what the right process to make change the ROM?
Click to expand...
Click to collapse
Be clear when asking for help, coz it'll help others to react to your query quickly................:angel::angel:BTW what about your bootloader is it locked or unlocked...........
Can you give more info?
Are you trying to do the following on locked or unlocked bl?
What kernel are you using?
You got that black screen when the rom is trying to boot up?
Or at the start up of the kernel?
Sent from my Xperia Mini using xda app-developers app
my bootloader is unlocked.. my xperia mini before i flash hyperbeamcream ROM is in SPARTAN ROM i followed instruction for installing HyperbeamCream i flash kernel Panic then backup the flash the zip but i end up to black screen.. Hyperbeam need a ICS rooted ROM?
Same prob here.
I am on panic+ulti hd (good) & I tried rage+ulti (black screen after the kernel bootscreen)
Wt19i-unlockBL
Are there compatibility issues on kernel & roms?
Sent from my WT19i using Tapatalk 2
No it's not actually you have to install your Rom clean means wiping all data of previous Rom this will definitely help you......
If I helped plz do hit thanx button
Sent from my ST15i using xda app-developers app
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
Another thing whenever you flash new custom kernel it's always good to reflash your Rom to avoid further problems......
Sent from my ST15i using xda app-developers app
Try to go back to stock rom.
Flash a custom kernel with recovery.
Wipe everything, including system folder.
Then flash the custom rom you wanted
Sent from my Xperia Mini using xda app-developers app
---------- Post added at 06:57 PM ---------- Previous post was at 06:51 PM ----------
You do not need to use kernel mentioned there, why not try with Lupus kernel for ics?
And also make sure you choosed your bl in Aroma.
Post again the result after you try.
Sent from my Xperia Mini using xda app-developers app
it's ok now i install the hyperbeamCream.. i though kernel panic is flashable via recovery you need to flash the kernel in flashtool while you in fastboot mode.. i follow this instruction http://forum.xda-developers.com/showthread.php?t=1695514 then install HyperbeamCream
You can not install any kernel via recovery in xperia line 2011
Sent from my Xperia Mini using xda app-developers app
Related
Is there a Cyanogenmod rom or a stock ICS/JB rom for Sony Xperia neo L? Or do the Xperia neo or Xperia neo V roms work just fine? Thanks.
seowalex said:
Is there a Cyanogenmod rom or a stock ICS/JB rom for Sony Xperia neo L? Or do the Xperia neo or Xperia neo V roms work just fine? Thanks.
Click to expand...
Click to collapse
Try neo ROMs for us get log cat also
Sent from my Xperia neo using xda premium
got any rom???
I got a CM9 Rom working on NeoL with a kernel.. the Camera is inverted if you are interested just let me know PM me
Wich rom u hav flashd , can give the links ?
Sent from my MT25i using xda app-developers app
kunalasrani said:
Wich rom u hav flashd , can give the links ?
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
Hi,
Guys here I share CM9 For Neo L, form FXP source.. tweaked and the ROM is moded from Xperia Play.
Current issue Camera is inverted...
++If you are interested to join on Neo L Rom/Kernel stuffs just PM me
Precondition You need to have Linux machine.. n should be little crazy for CLI..
Code:
Code:
[HTML]
Links
ROM
http://d-h.st/8Rw
Kernel
http://d-h.st/Krj
Gapps
http://goo.im/gapps/[/HTML]
Spcl thanks to FXP for source
an0nim0us for helps with first endeavor
b00tbu9 said:
I got a CM9 Rom working on NeoL with a kernel.. the Camera is inverted if you are interested just let me know PM me
Click to expand...
Click to collapse
Liboemcamera from lib
Sent from my Xperia Neo using XDA Premium HD app
kormatoes said:
Liboemcamera from lib
Sent from my Xperia Neo using XDA Premium HD app
Click to expand...
Click to collapse
I took the cameralib from stock and replace with CM9 and it didn't work...
b00tbu9 said:
I took the cameralib from stock and replace with CM9 and it didn't work...
Click to expand...
Click to collapse
OK
hi
---------- Post added at 02:53 PM ---------- Previous post was at 02:53 PM ----------
Usr Sony stuff to
hi
kormatoes said:
OK
hi
---------- Post added at 02:53 PM ---------- Previous post was at 02:53 PM ----------
Usr Sony stuff to
hi
Click to expand...
Click to collapse
yea I did from Sony Stock liboemcam lib file.. also play camlib file... both failed...
should we unlock bootloader first before flashing your CM9 ROM??
Yp you have to unlock boot loader
Sent from my NeoL using xda app-developers app
cores for Neo L
how to delete massage on this forum?!
bricked neo l
hey people,
i have done something foolish
i rooted my Neo l and forgot to unlock my bootloader.
to install a custom ROM, i wiped all data and dalvic cache WITH THE BOOTLOADEER LOCKED.
NOW ITS BRICKED, BUT IT DETECTS WHEN CONNECTED TO THE FLASHTOOL..
PLEASE HELP ME restore my device if its possible...
If not what hardware should i change???
Just flash back a stock Rom through flashtool!
It'll be as new as new! As you got it from Sony!
Sent from my MT11i using xda premium
klubmaskta said:
hey people,
i have done something foolish
i rooted my Neo l and forgot to unlock my bootloader.
to install a custom ROM, i wiped all data and dalvic cache WITH THE BOOTLOADEER LOCKED.
NOW ITS BRICKED, BUT IT DETECTS WHEN CONNECTED TO THE FLASHTOOL..
PLEASE HELP ME restore my device if its possible...
If not what hardware should i change???
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2039465
Find unbrick section and follow the tutorial
Sent from Sony Xperia Neo L MIUI
help playstore
i can't download anything from playstore
playstore say 'could not be downloaded due to an error. (403)'.
please anyone, help me
Neo L
Use a different vending.apk
Or a different version
Maybe that could fix it?
Sent from my MT11i using xda premium
looks like its not working
http://forum.xda-developers.com/show....php?t=2039465
Find unbrick section and follow the tutorial
Sent from Sony Xperia Neo L MIUI
what hardware should i change to bring back my phone to life....
Hi guys! I have a these problems with this ROM:
1. Home.apk FC at boot after 2-3 reboots.
2. Device randomly freezes at boot-animation.
3. Random reboots (device NOT overclocked).
How to fix it?
Thanks!
P.S. Device: Neo V MT11i
botinside said:
Hi guys! I have a these problems with this ROM:
1. Home.apk FC at boot after 2-3 reboots.
2. Device randomly freezes at boot-animation.
3. Random reboots (device NOT overclocked).
How to fix it?
Thanks!
P.S. Device: Neo V MT11i
Click to expand...
Click to collapse
Maybe your coming from another rom..
Follow this instruction (it works on mine so maybeit will work
Also in your device)
1.flash official ics .587 via flashtool then turn on your phone
2.if your bootloader is locked, follow instructionfor locked
(you can find it in js thread)
3if your bootloader is unlocked, flash a kernel with cwm support via fastboot
4.go to cwm
5wipe cache and dalvik cache
6install rom(be careful in choosing in aroma
7 reboot and done
I do this by several times, but rom crashes after reboot. I try a clean install without all «mods« - but nothing happens. =(
Maybe problem with kernel? I use a suave_v6_neoV.
But 7.2.1 and older works fine.. BL is unlocked.
Sent from my MT11i using xda app-developers app
botinside said:
I do this by several times, but rom crashes after reboot. I try a clean install without all «mods« - but nothing happens. =(
Maybe problem with kernel? I use a suave_v6_neoV.
But 7.2.1 and older works fine.. BL is unlocked.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
yup..maybe..
try to use night elf v1.5 then tell again what is the result
Hey guys. I'm using JellySandwich 6.2.5 on locked bootloader, what should I do to upgrade to 7.3? Follow the steps for 'coming from previous version' or steps for 'i have a locked bootloader'?
Cheers!
zadrozny91 said:
Hey guys. I'm using JellySandwich 6.2.5 on locked bootloader, what should I do to upgrade to 7.3? Follow the steps for 'coming from previous version' or steps for 'i have a locked bootloader'?
Cheers!
Click to expand...
Click to collapse
Not sure but you can try them both but be sure
To do a nandroid backup before do anything
and do I have to do wipes when upgrading from previous version?
botinside said:
I do this by several times, but rom crashes after reboot. I try a clean install without all «mods« - but nothing happens. =(
Maybe problem with kernel? I use a suave_v6_neoV.
But 7.2.1 and older works fine.. BL is unlocked.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
Check using Titanium Backup how much free mem you have in System. If you are using MT15i, chances are that the system partition is getting full as it has only 327 MB by default.
---------- Post added at 11:04 PM ---------- Previous post was at 11:01 PM ----------
Does the walkman have clearbass working on 7.3?
I use a Neo V and I have a 420 MB of system rom. I think a trouble causes by incompability 7.3 version of JS and suave kernel.. I`ll try to flash a night-elf kernel and report you results.
About clearbass.. if Walkman didn't have that, maybe installing audioengine from AC!D team can resolve problem by adding this option in Walkman? I may be wrong.
Sent from my MT11i using xda app-developers app
botinside said:
I use a Neo V and I have a 420 MB of system rom. I think a trouble causes by incompability 7.3 version of JS and suave kernel.. I`ll try to flash a night-elf kernel and report you results.
About clearbass.. if Walkman didn't have that, maybe installing audioengine from AC!D team can resolve problem by adding this option in Walkman? I may be wrong.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
Try to reflash the walkman of thilina
Sent from my Xperia Neo V with JS 7.3 with salade and peppercheese and more !!
in walkman player album art not showing. album art show in widget only. please fix this
Problem has been solved by flashing night-elf kernel v1.5. Thanks a lot all of you for help! Thread closed.
Sent from my MT11i using xda app-developers app
Hi guys, i need some help.
I have a Mt11i sony ericsson neo v.
The bootloader is unlocked, and i was using aokp build 4 normally.
Today i tried to update it to build 5 in recovery mode, it all went normal. Flashed the rom, the gapps and the kernel with fastboot.
And when i tried to turn on the phone, it doesn't. The led doesn't blink, the screen doesn't turn on... nothing.
It just vibrates when i hold power, but it stays that way.
Someone can help me?
I did everything right, i always try new roms and stuff. I think i did everyhing right, at least.
Thanks.
thiagobraga said:
Hi guys, i need some help.
I have a Mt11i sony ericsson neo v.
The bootloader is unlocked, and i was using aokp build 4 normally.
Today i tried to update it to build 5 in recovery mode, it all went normal. Flashed the rom, the gapps and the kernel with fastboot.
And when i tried to turn on the phone, it doesn't. The led doesn't blink, the screen doesn't turn on... nothing.
It just vibrates when i hold power, but it stays that way.
Someone can help me?
I did everything right, i always try new roms and stuff. I think i did everyhing right, at least.
Thanks.
Click to expand...
Click to collapse
Try flashing another kernel like stock one through flashtool flash mode
And flash stock Rom....! Through flash mode itself!
Sent from my MT11i using xda premium
---------- Post added at 06:57 PM ---------- Previous post was at 06:46 PM ----------
http://forum.xda-developers.com/showthread.php?t=1963952
[Q] Xperia Neo V bricked after flashing AOKP build 5 kernel
Read this.... Maybe it can help ya
Sent from my MT11i using xda premium
Ghostfreak NB said:
Try flashing another kernel like stock one through flashtool flash mode
And flash stock Rom....! Through flash mode itself!
Sent from my MT11i using xda premium
---------- Post added at 06:57 PM ---------- Previous post was at 06:46 PM ----------
http://forum.xda-developers.com/showthread.php?t=1963952
[Q] Xperia Neo V bricked after flashing AOKP build 5 kernel
Read this.... Maybe it can help ya
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Thanks man.
O read this post after opening a thread. Already solved it.
Thank you for your attention.
Hi,
I want to flash cm9 on my Xperia Neo V. Should i use freeXperia cm9 from here or from cyanogenmod website. I tried from Cyanogenmod website cm9 nightly, i extracted kernel from zip and flashed a kernel and then when i press power on to get into recovery nothing comes up just vibrate.
I am on custom rom Xperia T v6 with suave kernel right now...
first should i flash kernel or rom... which one should go first.
session20 said:
Hi,
I want to flash cm9 on my Xperia Neo V. Should i use freeXperia cm9 from here or from cyanogenmod website. I tried from Cyanogenmod website cm9 nightly, i extracted kernel from zip and flashed a kernel and then when i press power on to get into recovery nothing comes up just vibrate.
I am on custom rom Xperia T v6 with suave kernel right now...
first should i flash kernel or rom... which one should go first.
Click to expand...
Click to collapse
use from forum....fxp149
Sent from my MT11i using xda premium
Does fxp149 kernel has build in CWM,????
nothing happens after flash a kernel. when i switch on the phone it just vibrate and then nothing comes up...
session20 said:
first should i flash kernel or rom... which one should go first.
Click to expand...
Click to collapse
I'm used to flash Kernel first, but reading through the forums I've read that should be the same.
Actually,its better to flash kernel first and then do wipes and flash Rom!
Though doin the other way round too is fine, in some cases, but not all!
Sent from my MT11i using Tapatalk 2
---------- Post added at 09:37 PM ---------- Previous post was at 09:35 PM ----------
session20 said:
Does fxp149 kernel has build in CWM,????
nothing happens after flash a kernel. when i switch on the phone it just vibrate and then nothing comes up...
Click to expand...
Click to collapse
Of course that kernel has cwm inbuilt!
The problem is not in kernel!
Its just because you are flashing cm9 which is Ics
And FXP 150 or 149 is Jb! I guess!
So it just won't work!
Kernel and Rom have to be same!
Either Ics both or Jb both!
Sent from my MT11i using Tapatalk 2
Ghostfreak NB said:
Actually,its better to flash kernel first and then do wipes and flash Rom!
Though doin the other way round too is fine, in some cases, but not all!
Sent from my MT11i using Tapatalk 2
---------- Post added at 09:37 PM ---------- Previous post was at 09:35 PM ----------
Of course that kernel has cwm inbuilt!
The problem is not in kernel!
Its just because you are flashing cm9 which is Ics
And FXP 150 or 149 is Jb! I guess!
So it just won't work!
Kernel and Rom have to be same!
Either Ics both or Jb both!
Sent from my MT11i using Tapatalk 2
Click to expand...
Click to collapse
Currently using xperia T v6 with sauve kernel.
As in the picture its says fxp149 cm9. I will explain what I am doing to install cm9.....
double clicking cm9.zip and extracting boot.img and pasting it in c:flashtool/firmwares then switching off device. fastboot, blue light.. clicking flash icon-- fastboot mode then select kernel to flash --- select boot.img --- done
Switching on device, it just vibrates after nothing happens....
then again flash sauve kernel then sony logo comes up and phone boots up...
what am i doing wrong plz help me in installing cm9.. want to try cm9 .
Wait.... Why don't you try to flash kernel via cmd!
This is the command!
Fastboot flash boot boot.img
Try flashing this!
Ps :flash after goin in fastboot mode! Just don't use flashtool this time! Maybe this could work!
Sent from my MT11i using Tapatalk 2
i have tried that too... by both methods...flashing status is ok in the log
Then last option!
Flash stock fw again
And try again!
Sent from my MT11i using Tapatalk 2
flash stock means will I lose root....should I flash stock kernel and firmware.
session20 said:
flash stock means will I lose root....should I flash stock kernel and firmware.
Click to expand...
Click to collapse
Yup I meant the entire fw!
Including kernel!
You would lose root!
But you can root it again, right?
Sent from my MT11i using Tapatalk 2
--> Xperia x10, flashed with 2.3.3
--> Rooted , installed xrecovery
--> Locked boot loader
Steps followed to install FeraLab v29
-------------------------------------------
1. Booted into xRecovery
2. Install custom ROM
3. Chosen FeraKernel.zip
Failed on certification issue
then Installed CMW recovery, Could not flash ferakernel
Tried to flash Feravolt v29 ROM it works, but stays in SE logo in 1st reboot..
Please help me...
You've spammed this post in several different and not right topics for an answer look at fera topic for Rom he gave you the answer
Sent from my C1905 using xda premium
---------- Post added at 08:36 PM ---------- Previous post was at 08:35 PM ----------
Taken from fervolts topic for Rom
oh god -_-... just tell me why to flash kernel again, while its already included in rom package..as it is written in instructions?
Sent from my C1905 using xda premium