--> Xperia x10, flashed with 2.3.3
--> Rooted , installed xrecovery
--> Locked boot loader
Steps followed to install FeraLab v29
-------------------------------------------
1. Booted into xRecovery
2. Install custom ROM
3. Chosen FeraKernel.zip
Failed on certification issue
then Installed CMW recovery, Could not flash ferakernel
Tried to flash Feravolt v29 ROM it works, but stays in SE logo in 1st reboot..
Please help me...
You've spammed this post in several different and not right topics for an answer look at fera topic for Rom he gave you the answer
Sent from my C1905 using xda premium
---------- Post added at 08:36 PM ---------- Previous post was at 08:35 PM ----------
Taken from fervolts topic for Rom
oh god -_-... just tell me why to flash kernel again, while its already included in rom package..as it is written in instructions?
Sent from my C1905 using xda premium
Related
Hi guys, i need some help.
I have a Mt11i sony ericsson neo v.
The bootloader is unlocked, and i was using aokp build 4 normally.
Today i tried to update it to build 5 in recovery mode, it all went normal. Flashed the rom, the gapps and the kernel with fastboot.
And when i tried to turn on the phone, it doesn't. The led doesn't blink, the screen doesn't turn on... nothing.
It just vibrates when i hold power, but it stays that way.
Someone can help me?
I did everything right, i always try new roms and stuff. I think i did everyhing right, at least.
Thanks.
thiagobraga said:
Hi guys, i need some help.
I have a Mt11i sony ericsson neo v.
The bootloader is unlocked, and i was using aokp build 4 normally.
Today i tried to update it to build 5 in recovery mode, it all went normal. Flashed the rom, the gapps and the kernel with fastboot.
And when i tried to turn on the phone, it doesn't. The led doesn't blink, the screen doesn't turn on... nothing.
It just vibrates when i hold power, but it stays that way.
Someone can help me?
I did everything right, i always try new roms and stuff. I think i did everyhing right, at least.
Thanks.
Click to expand...
Click to collapse
Try flashing another kernel like stock one through flashtool flash mode
And flash stock Rom....! Through flash mode itself!
Sent from my MT11i using xda premium
---------- Post added at 06:57 PM ---------- Previous post was at 06:46 PM ----------
http://forum.xda-developers.com/showthread.php?t=1963952
[Q] Xperia Neo V bricked after flashing AOKP build 5 kernel
Read this.... Maybe it can help ya
Sent from my MT11i using xda premium
Ghostfreak NB said:
Try flashing another kernel like stock one through flashtool flash mode
And flash stock Rom....! Through flash mode itself!
Sent from my MT11i using xda premium
---------- Post added at 06:57 PM ---------- Previous post was at 06:46 PM ----------
http://forum.xda-developers.com/showthread.php?t=1963952
[Q] Xperia Neo V bricked after flashing AOKP build 5 kernel
Read this.... Maybe it can help ya
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Thanks man.
O read this post after opening a thread. Already solved it.
Thank you for your attention.
i installed MINU v1 Peeper on my xperia sola through CWM and now its stucked at MIUI logo what to do, non of the bottons are working...plz help
nishangrg said:
i installed MINU v1 Peeper on my xperia sola through CWM and now its stucked at MIUI logo what to do, non of the bottons are working...plz help
Click to expand...
Click to collapse
Are you try to flash the rom with non stock kernel? It can brick your phone!
Dont panic! Hold the power button and vol up together until vibrate 3 time then it will shut down!
Sent from my MT27i using xda app-developers app
Flash the stock ftf file using flashtool
---------- Post added at 07:29 PM ---------- Previous post was at 07:13 PM ----------
Instructions here
http://forum.xda-developers.com/showthread.php?t=2023135
So I have a MT11i on .42 firmware rooted. Now I want to Install a stable CM9 for Neo V (haida) but I have some questions before messing up!
First of all I want to know if I can use CM9 on GB 2.3.4 .42 on 56 baseband. I know that I need to unlock my bootloader before installing kernels and roms. Also when I downloaded the CM9 ROM I found 3 files. META-INF, system and boot which is the kernel. So, once I put the kernel which file I should flash on CMW? The META-INF or the system. I think that I need to make another folder and put these folders in it. Is it right???
That's all. Thanks in advance and please help me. I have already searched but didn't find the answers on my questions. Thanks again!
baseband u have to use a ics one i wouldnt recomed that one. i used the .72 and it was fine. the kernel is in the zip names boot.img. if its not there got to get.cm and select the cm that is for your device. in your cAse it is "haida" for neo v
press thanks if i helped!!
Sent from my Xperia Neo V using xda premium
---------- Post added at 12:39 PM ---------- Previous post was at 12:33 PM ----------
http://forum.xda-developers.com/showthread.php?t=1746919
Next time do a bit of searching and be a good noob!!
http://forum.xda-developers.com/showthread.php?t=2080250
Sent from my Xperia Neo V using xda premium
Hello guys mi brother recovered from some hours of broken touchscreen, he was testing if mi miui worked but he accidentally (didnt noticed) selected active instead of lww at aroma. Its easy to solve it. Follow this steps for unlocked bl:
Flash .62 gb
Flash a Kernel
Flash a rom
Flash .62 gb
Ready to work ^^
Locked bl:
Flash .62
Flash unbriking xperia 2011 zip (search)
Flash .62
Ready
If you recovered with this press thanks & comment
Sent from my WT19i using xda premium
Nachospeicys said:
Hello guys mi brother recovered from some hours of broken touchscreen, he was testing if mi miui worked but he accidentally (didnt noticed) selected active instead of lww at aroma. Its easy to solve it. Follow this steps for unlocked bl:
Flash .62 gb
Flash a Kernel
Flash a rom
Flash .62 gb
Ready to work ^^
Locked bl:
Flash .62
Flash unbriking xperia 2011 zip (search)
Flash .62
Ready
If you recovered with this press thanks & comment
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Right now there are four different threads on "fix broken toichscreen"
You just made another one... With the exact same fix...
And atleast give credits to the actual user who stated the fix... :sly:
---------- Post added at 08:58 PM ---------- Previous post was at 08:56 PM ----------
The first fix provided by xshanep19
http://forum.xda-developers.com/showthread.php?p=35481026
We don't need another of these threads.
Thanks
AvRS
guys sorry for this thread but my ROM in xperia mini using Spartan ROM i change into HyperbeamCream but im stock at black screen? i follow the instruction in HyperbeamCream thread. what the right process to make change the ROM?
Be clear...........
gAracUh said:
guys sorry for this thread but my ROM in xperia mini using Spartan ROM i change into HyperbeamCream but im stock at black screen? i follow the instruction in HyperbeamCream thread. what the right process to make change the ROM?
Click to expand...
Click to collapse
Be clear when asking for help, coz it'll help others to react to your query quickly................:angel::angel:BTW what about your bootloader is it locked or unlocked...........
Can you give more info?
Are you trying to do the following on locked or unlocked bl?
What kernel are you using?
You got that black screen when the rom is trying to boot up?
Or at the start up of the kernel?
Sent from my Xperia Mini using xda app-developers app
my bootloader is unlocked.. my xperia mini before i flash hyperbeamcream ROM is in SPARTAN ROM i followed instruction for installing HyperbeamCream i flash kernel Panic then backup the flash the zip but i end up to black screen.. Hyperbeam need a ICS rooted ROM?
Same prob here.
I am on panic+ulti hd (good) & I tried rage+ulti (black screen after the kernel bootscreen)
Wt19i-unlockBL
Are there compatibility issues on kernel & roms?
Sent from my WT19i using Tapatalk 2
No it's not actually you have to install your Rom clean means wiping all data of previous Rom this will definitely help you......
If I helped plz do hit thanx button
Sent from my ST15i using xda app-developers app
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
Another thing whenever you flash new custom kernel it's always good to reflash your Rom to avoid further problems......
Sent from my ST15i using xda app-developers app
Try to go back to stock rom.
Flash a custom kernel with recovery.
Wipe everything, including system folder.
Then flash the custom rom you wanted
Sent from my Xperia Mini using xda app-developers app
---------- Post added at 06:57 PM ---------- Previous post was at 06:51 PM ----------
You do not need to use kernel mentioned there, why not try with Lupus kernel for ics?
And also make sure you choosed your bl in Aroma.
Post again the result after you try.
Sent from my Xperia Mini using xda app-developers app
it's ok now i install the hyperbeamCream.. i though kernel panic is flashable via recovery you need to flash the kernel in flashtool while you in fastboot mode.. i follow this instruction http://forum.xda-developers.com/showthread.php?t=1695514 then install HyperbeamCream
You can not install any kernel via recovery in xperia line 2011
Sent from my Xperia Mini using xda app-developers app