Hey guys i hope you can help me ok here is my problem
I have an atrix 4g motorola and recently i wanted to root my phone and downloaded superoneclick tool but after i connect the phone to the computer i click on advanced setting and it says: the following device does not have drivers installed i skiped this message and clicked on the root button but the same message appears over and over and i click no because i dont know if clicking yes i could damage my phone.
Then my phone reboots and nothing happens. i dont know what to if someone have already rooted the phone this way i really want to know how yo do it.
Sorry about my english annd thanks
Version of the system 45.2.48. Android version 2.3.6
Hello guys,
Ive been lurking here for a while and i finally thought about joining the gang.
I cant find the LG E510 thread here so please move my thread if this place is inappropriate. Thank you.
I updated this E510 via the LG mobile support software and the install [after downloading firmware] got stuck at around 4% then at 14%
The software prompted me to remove the phone from connection, pull out the battery then try again. Now its stuck at boot screen.
I can start up the "Emergency Mode", where its the only way my PC can recognize the device connected. I tried using the LG software again but i get this:
Hard reset is said to be VolDown + Home + Power On yet it doesnt work, only gets to logo.
This is an unrooted phone that why i used LG-provided update software.
THe PC can detect the devices and installed drivers. The software can too, but this error is persistent.
A friend said something about disabling the LG modem in the device manager but i still get this error.
I have ADB which i used sometime ago with my HTC but the ADB says device not found.
Any help would be appreciated.
Thank you very much.
*** SOLVED
I dont know what exactly made it work but i did the following.
Disabled [not uninstall] all other devices installed by the phone except the LG Android Platform
- disable and restart. if uninstall is used windows will just install it again after restart. disable.
- may be a problem with my PC that it has difficulties connecting with the phone if the other child devices are on
Uninstalled the Update Software and Installed it again
This time i clicked Options > Update Recovery
- prompted for my Phone Model + SN or just the IMEI <- brainfart on my part shouldve seen this earlier
The software downloaded the exact same firmware V10H_00.kdz and installed it. Success!
Maybe there was something bad with the first one i downloaded being on WiMax connectivity.
I feel so stupid right now being unobservant and all...
Anyway thank you!
All right, I have a question... I have tried a root method for Alcatel OT-918 from your forums, and it worked... but after some time, I turned my phone off and then it would suddenly go to Android screen and restart itself and then go to Android startup screen and do the same, it caught in a loop, although it had worked for weeks after I rooted in... anyway... I sent it to repair service and they said that only thing they did is upgraded software as suggested by manufacturer. Now when I try to root my phone using FlashTool and a given scatter file for my android I simply can not, it says "Can not find USB port." Although I have all the drivers installed and everything is working properly... nevertheless, when I tried to install alternative usb_driver, I got an error saying "no device tree"... Anyway, I really need a solution and find out why is this happening...
Hi everyone,
I have a Sony Tablet S with Android Version 4.0.3 release 5a and I am having problems with the Android Software, the programs such as browser, games even android base applications keep crashing. The device is still under warranty and I sent it for repair however the service here requested around 100$ for software installation as it is not under warranty. This is too much for me so I decided to do it myself however. I have searched this forum and many more to find a solution however even I have tried every step described in forums several time I could not be able to reinstall latest ROM from SD Card. I really desperately need some help here as this device is purchased solely for my daughter who loves android games alot.
I really appreciate any help you may provide.
Thanks.
Aktemur said:
Hi everyone,
I have a Sony Tablet S with Android Version 4.0.3 release 5a and I am having problems with the Android Software, the programs such as browser, games even android base applications keep crashing. The device is still under warranty and I sent it for repair however the service here requested around 100$ for software installation as it is not under warranty. This is too much for me so I decided to do it myself however. I have searched this forum and many more to find a solution however even I have tried every step described in forums several time I could not be able to reinstall latest ROM from SD Card. I really desperately need some help here as this device is purchased solely for my daughter who loves android games alot.
I really appreciate any help you may provide.
Thanks.
Click to expand...
Click to collapse
hello,
try a hard reset. hold VOL up + POWER and when you see the logo sony release the VOL up button. then choose a factory reset. do not have to install from sd card.
Already tried hard and soft reset. Doesn't work.
I will try to describe the problem in full detail. I have weird error messages like "Google Play Store stopped working" "browser stopped working" "clock stopped working" and such error messages and when I try to uninstall programs i can uninstall them however when the tablet restarts they are all there, I think machine resets it self. If i try to uninstall a program called "Ustream" the tablet immediately goes off, and restarts resetting it self again. Even the soft and hard reset can not solve the problem. I have tried to boot the device, it says it is booted (I have managed to run adb and flash tools) how ever when the tablet restarts it again resets it self having the exact same situation as before. I have downloaded the official R5A update from the Sony Website when ever i try to install update from SD, the machine stops saying the operation is aborted due to some error. There must be a way to reset this machine to what ever it was.
Aktemur said:
I will try to describe the problem in full detail. I have weird error messages like "Google Play Store stopped working" "browser stopped working" "clock stopped working" and such error messages and when I try to uninstall programs i can uninstall them however when the tablet restarts they are all there, I think machine resets it self. If i try to uninstall a program called "Ustream" the tablet immediately goes off, and restarts resetting it self again. Even the soft and hard reset can not solve the problem. I have tried to boot the device, it says it is booted (I have managed to run adb and flash tools) how ever when the tablet restarts it again resets it self having the exact same situation as before. I have downloaded the official R5A update from the Sony Website when ever i try to install update from SD, the machine stops saying the operation is aborted due to some error. There must be a way to reset this machine to what ever it was.
Click to expand...
Click to collapse
If you have adb, you can try to root tab and apply the backdoor patch.
Sony Tablet S cihazımdan Tapatalk kullanılarak gönderildi
smgdev said:
If you have adb, you can try to root tab and apply the backdoor patch.
Sony Tablet S cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
I have already tried that. The adb, flasher and other tools that I have found in this site. All in one tool says it has succesfully rooted the device but whenever it boots it restores itself to a previous unknown backup with all the applications installed and I guess not rooted state. I have used the flasher yet it needs rooted device. I have tried to update the system from SD, it says the software is low version (5A). I can not do anything. There must be a solution for this.
Aktemur said:
I have already tried that. The adb, flasher and other tools that I have found in this site. All in one tool says it has succesfully rooted the device but whenever it boots it restores itself to a previous unknown backup with all the applications installed and I guess not rooted state. I have used the flasher yet it needs rooted device. I have tried to update the system from SD, it says the software is low version (5A). I can not do anything. There must be a solution for this.
Click to expand...
Click to collapse
After attempting root the tablet is rebooting into the other partition. (There are two system partitions). Can you try rooting again and on the last reboot boot into recovery and try to install R5a twice in a row without restarting from the recovery menu. Hopefully this will catch the system switch and install R5a on the other system
stifilz said:
After attempting root the tablet is rebooting into the other partition. (There are two system partitions). Can you try rooting again and on the last reboot boot into recovery and try to install R5a twice in a row without restarting from the recovery menu. Hopefully this will catch the system switch and install R5a on the other system
Click to expand...
Click to collapse
I think I have rooted the device asthere is a "device manager" in the security options. However adb programs fails to recognize the device. I have installed the driver several times, restarted the computer how ever it did not change. Last time I was able to see the device in the adb device list. But i do not know what I have done to achieve this as I have tired many options. Can you describe me how to do that step by setp?
Aktemur said:
I think I have rooted the device asthere is a "device manager" in the security options. However adb programs fails to recognize the device. I have installed the driver several times, restarted the computer how ever it did not change. Last time I was able to see the device in the adb device list. But i do not know what I have done to achieve this as I have tired many options. Can you describe me how to do that step by setp?
Click to expand...
Click to collapse
EDIT: I have AIO tools and flasher and ADB automatic driver instlaller. Now ADB Automatic installer worked just fine the adb devices i can see the device serial number. There is an "android device manager" option which I have enabled from security settings in my tablet. USB debugging mode is active however the S.onyTablet.S allinone v6.5 by konrad plasczykowski can not flash the tablet, it can not find the tablet. when i boot in to recover i have 3 options listed.
1. restart device
2 update sysstem from SD cARD
3 Reset to factory settings
when i choose update system from SD cart i see" Erohibit update as a result of checking versdion or base sku insallation aborted." message what does that mean?
there are no other options. how can i continue on...
Aktemur said:
EDIT: I have AIO tools and flasher and ADB automatic driver instlaller. Now ADB Automatic installer worked just fine the adb devices i can see the device serial number. There is an "android device manager" option which I have enabled from security settings in my tablet. USB debugging mode is active however the S.onyTablet.S allinone v6.5 by konrad plasczykowski can not flash the tablet, it can not find the tablet. when i boot in to recover i have 3 options listed.
1. restart device
2 update sysstem from SD cARD
3 Reset to factory settings
when i choose update system from SD cart i see" Erohibit update as a result of checking versdion or base sku insallation aborted." message what does that mean?
there are no other options. how can i continue on...
Click to expand...
Click to collapse
After the update fail. Use adb pull /tmp/recovery.log and post it here and I will see what is happening
The flashing operation fails as the system can not access to the specified directory. Whenever I run the flashing tool the command windows background turns to red and I see this error. ADB can list the device yet I can not flash it.
By the way I have to reinstall all the drivers everytime I connect the tablet to PC, if I remove the cable and re mount it adb fails to list the device.
I have a LG K7 MS330 whose software was not working properly. Looking for a solution, I found that there were several firmware updates of this terminal (I had the version 10e compilation), which basically consisted of more recent versions of compilation distributed in kdz files. I proposed to download the latest update available ensuring I download the file corresponding to the smartphone region (MTP in my case).
So, I downloaded the file MS33010k_00_0405.kdz, the tool LGUP 1.14.3 and the file LGUP_MS330.dll version 0.1.2.7. I connected the phone to the PC and started the process.
At 99% the installation failed. However, I could still enter in download mode. So, I download an older version, the MS33010h_00_1021.kdz and repeated the process. This time I got no error.
However, when I finished, my phone went into hardbrick mode. Check the battery and no problem, even charging perfect inside the phone. I do not think the device has any problem with hardware as it worked before. The only life signal I have now from the device is connecting it via USB to PC and press the VOL +, VOL- and POWER buttons simultaneously. In this way, Windows recognizes it as "unknown usb device".
I would be grateful to anyone who can help me with this problem. Regards
I have the same problem!! Please!!
WOoh, I can't believe it. I have the same HEAD-BRICK, because my head has really bricked with this. I came here looking for answers and I just found that someone have the same problem than me, and with no answer. I did similars procediments before I get the hardbrick mode. Please, someone help me, I will really apreciate your help!!!! I really need to fix this!!! Please Please Please :crying: :crying:
i have the same problem too can some one help... no download mode.. no
emergency mode...please
Same.. Did anyone find out how to fix it?
Same issue... stuck in Qualcomm mode.
Any fix yet?
Need an mbn file for this K7. Looks like the only
Hope is finding the qfil file and firehose? Firehouse?. I forget. Xml file. If anyone has leads to where to start or links. It
Would be appreciated. Thank.
I have the exact same problem
I have the exact same problem that you have. I flashed an older rom by accident and now the screen is black and it is detected as qdloader9008. If anyone has found the firehose and the rest of the QFIL files then please help us.