I have a LG K7 MS330 whose software was not working properly. Looking for a solution, I found that there were several firmware updates of this terminal (I had the version 10e compilation), which basically consisted of more recent versions of compilation distributed in kdz files. I proposed to download the latest update available ensuring I download the file corresponding to the smartphone region (MTP in my case).
So, I downloaded the file MS33010k_00_0405.kdz, the tool LGUP 1.14.3 and the file LGUP_MS330.dll version 0.1.2.7. I connected the phone to the PC and started the process.
At 99% the installation failed. However, I could still enter in download mode. So, I download an older version, the MS33010h_00_1021.kdz and repeated the process. This time I got no error.
However, when I finished, my phone went into hardbrick mode. Check the battery and no problem, even charging perfect inside the phone. I do not think the device has any problem with hardware as it worked before. The only life signal I have now from the device is connecting it via USB to PC and press the VOL +, VOL- and POWER buttons simultaneously. In this way, Windows recognizes it as "unknown usb device".
I would be grateful to anyone who can help me with this problem. Regards
I have the same problem!! Please!!
WOoh, I can't believe it. I have the same HEAD-BRICK, because my head has really bricked with this. I came here looking for answers and I just found that someone have the same problem than me, and with no answer. I did similars procediments before I get the hardbrick mode. Please, someone help me, I will really apreciate your help!!!! I really need to fix this!!! Please Please Please :crying: :crying:
i have the same problem too can some one help... no download mode.. no
emergency mode...please
Same.. Did anyone find out how to fix it?
Same issue... stuck in Qualcomm mode.
Any fix yet?
Need an mbn file for this K7. Looks like the only
Hope is finding the qfil file and firehose? Firehouse?. I forget. Xml file. If anyone has leads to where to start or links. It
Would be appreciated. Thank.
I have the exact same problem
I have the exact same problem that you have. I flashed an older rom by accident and now the screen is black and it is detected as qdloader9008. If anyone has found the firehose and the rest of the QFIL files then please help us.
Related
Hi I messed up with my LG G5, help needed ?
I want to tell u what i did until now.
I want to root my phone:
1. Unlock Bootloader.
2. Install TWRP
3. Messing around in TWRP becaus i dont finde the SuperSU files cause of encryption usw.
4. Want to Swipe all data and start all over again
5. bootet my device normaly and ther is just the Message "Your device software cant be checked for corruption".
I cant do anything now. I tried to factory reset the phone didnt work. The phone doesnt react to any CMD commands.
I cant enter the TWRP.
I used LG UP to flash the device but LG UP doesnt recognizes my phone correctly, neither in USB Download Mode or in the so calles status, where i just got the blackscreen with the Message"Your device software cant be checked for corruption".
Maybe you guys have a solution.
PS. Sorry for bad english
as long you can start into download mode, your device is not bricked.
this thread should help installing and using LGUP correctly.
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you have a KDZ for install?
zebulon98 said:
as long you can start into download mode, your device is not bricked.
this thread should help installing and using LGUP correctly.
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you have a KDZ for install?
Click to expand...
Click to collapse
Thanks i did that and it worked. Thx to you mate problem solved
LG G5 Bricked
Hi guys...
I messed my LG G5 up trying to flash t-mobile nougat kdz via twrp on my rooted 7.0 vodafone branded phone (i wanted to use the WLAN calling feature).
Nothing works, no buttons pushing + power / up / down volume... The ONLY thing, that makes
a sign of life is the windows-sound when connecting the USB cable... there's a device shown
QUSB__BULK (not properly installed) and that's all..
I tried installing USB drivers for the LG G5 and also the Suite / LGUP / LG Mobile Support Tool / Bridge...
nothing works... is there any possible way to to fix it?
Thanks in advance for any kind of help...
mryo said:
Hi guys...
I messed my LG G5 up trying to flash t-mobile nougat kdz via twrp on my rooted 7.0 vodafone branded phone (i wanted to use the WLAN calling feature).
Nothing works, no buttons pushing + power / up / down volume... The ONLY thing, that makes
a sign of life is the windows-sound when connecting the USB cable... there's a device shown
QUSB__BULK (not properly installed) and that's all..
I tried installing USB drivers for the LG G5 and also the Suite / LGUP / LG Mobile Support Tool / Bridge...
nothing works... is there any possible way to to fix it?
Thanks in advance for any kind of help...
Click to expand...
Click to collapse
there is an answer by autoprime to your question
autoprime said:
The unique programmers required for the G5 for BoardDiag to work are not public so forcing your way into 9008 won't get you anywhere.
Click to expand...
Click to collapse
with 9008 he means qhsusb_bulk. The drivers you will need are from Qualcomm, once BoardDiag files for G5 are public.
were the boarddiag files ever made public?
Facing the Same problem
I am now facing the above mentioned problem. My g5 h850 doesn't do anything and the only sign of life there is when i connect it to my PC and it picks up as Qualcom hs- usb Qdloader 9008 other than that no display no sound from the handset whatsoever tried getting it into download mode but it won't show anything. I installed all the drivers and tried connecting with lg up but it doesn't pick the phone on any com ports. Is my phone completely damaged or can I do something to bring it back to life. Please help someone
qfil with firehose or octoplus may solve your problem
Can't find the required files anywhere
sbacham said:
qfil with firehose or octoplus may solve your problem
Click to expand...
Click to collapse
QFIL needs PrimaryGPT_0.bin file through firmware extractor but no matter what stock firmware i extract I get multiple patch files like PrimaryGPT_0.bin, PrimaryGPT_1.bin, PrimaryGPT_2.bin, PrimaryGPT_3.bin .......PrimaryGPT_7.bin and when I try to get them through emmc it won't recognize any of the GPT files. That's the step where I am stuck plus I can't seem to find the mbn file for H850
I have lg v20, I too hardbricked my phone, when I extract any kdz I got 7 gpt files. primarygpt0 to primarygpt06 as you said.
are you sure we only need primargpt0 to flash via qfil? i think we need proper firehose/ programmer file and rawprogram file
Maybe I hard bricked mine:
Flashed with uppercut in download mode but with every KDZ file in UPGRADE mode I tried , after the second lg logo with sound of wellcome, it freeze and reboot over and over, it seems that crushes in infinite bootloop. Is this hard bricked?
no, this is not hardbricked. atleast you can enter into download mode.
trash195 said:
Hi I messed up with my LG G5, help needed ?
I want to tell u what i did until now.
I want to root my phone:
1. Unlock Bootloader.
2. Install TWRP
3. Messing around in TWRP becaus i dont finde the SuperSU files cause of encryption usw.
4. Want to Swipe all data and start all over again
5. bootet my device normaly and ther is just the Message "Your device software cant be checked for corruption".
I cant do anything now. I tried to factory reset the phone didnt work. The phone doesnt react to any CMD commands.
I cant enter the TWRP.
I used LG UP to flash the device but LG UP doesnt recognizes my phone correctly, neither in USB Download Mode or in the so calles status, where i just got the blackscreen with the Message"Your device software cant be checked for corruption".
Maybe you guys have a solution.
PS. Sorry for bad english
Click to expand...
Click to collapse
Hi . I I would like to know did you slove your problem ? If yes then what you did plz let me know I’m having same problem with my lgh850.
Hi everyone!
I recently bought a LG V10 h961n from eBay. I had no interest in root, so I updated it to marshmallow. However, I encountered huge wi-fi connectivity problems: the phone would connect to WiFi, but only really close to the router, and the latency was unexplainable high. The only workaround I have have found was a guide posted here in XDA which required root.
So, I started digging and I found a tot file of lollipop already rooted. I downloaded the kdz for lollipop hoping to downgrade using lgup and/or flash tool. All the flashing end with a 0x2000 error code in lgup and a "contact your system administrator" error on flash tool.
Now,the phone is stuck into download mode whatever button I press: power to boot normally, power+volume down or up.
The only combination working differently is volume up+down+power that bring me to the IMEI.
In the end, i was hoping that someone was able to find a solution. I really love this phone, and I would really feel bad if I had to throw it away and buy another one.
Thank you in advance.
Ash9999 said:
Hi everyone!
I recently bought a LG V10 h961n from eBay. I had no interest in root, so I updated it to marshmallow. However, I encountered huge wi-fi connectivity problems: the phone would connect to WiFi, but only really close to the router, and the latency was unexplainable high. The only workaround I have have found was a guide posted here in XDA which required root.
So, I started digging and I found a tot file of lollipop already rooted. I downloaded the kdz for lollipop hoping to downgrade using lgup and/or flash tool. All the flashing end with a 0x2000 error code in lgup and a "contact your system administrator" error on flash tool.
Now,the phone is stuck into download mode whatever button I press: power to boot normally, power+volume down or up.
The only combination working differently is volume up+down+power that bring me to the IMEI.
In the end, i was hoping that someone was able to find a solution. I really love this phone, and I would really feel bad if I had to throw it away and buy another one.
Thank you in advance.
Click to expand...
Click to collapse
I am exactly in the same situation since yesterday but with a F600L... Il yours still detected by LG Bridge ?
Please V10 experts we need help !
spacekiller67 said:
I am exactly in the same situation since yesterday but with a F600L... Il yours still detected by LG Bridge ?
Please V10 experts we need help !
Click to expand...
Click to collapse
It is, but it keeps rebooting over and over until I unplug it...
Solved, just kept trying to connect to lg bridge. In the end it detected my phone and installed the os by clicking on "update error recovery". Hope you'll solve too!
I accidently erased the firmware off my Sky 5.5W and I have searched everywhere for it.
My computer recognises it but cant find the firmware .
Does anyone know where I can find it or if I can use different firmware?
Thanks
can you tell me the current condition of your device?
Like is it stuck on boot logo (boot loop)
or is it bricked?
I don't think it's bricked as the laptop still finds it.
try checking this link out
https://forum.xda-developers.com/showthread.php?t=1936747&page=2
also like my replies, its a great encouragement if you do so
Will it work with an mtk device.? I tried it but can find the proper software for it. The files the qfl asks for aren't apart of the files I have.
Well honestly I have never worked with MTK devices but I know what you should do.
Now if that's the case you may download SPFT (Smart Phone Flash Tool) and find the appropriate drivers for your MTK device and then flash the ROM you want to (I prefer the stock room).
I hope this will help you.
...I'm in similar position with a Platinum 5. Please let me know whether you found ROM for this device and if so where, and I'll let you know what I find out if you need. I think I'll try to get something from SKY themselves so wish me luck.
I have an LG K7 on Metro. It's in some sort of boot loop. I have searched XDA and the net for a solution and keep coming up with solutions involving download mode. I'm unsure of what to do next. The phone has Error # 9 Authentication error as well as error 1009. When trying to go into Download mode it goes for about 10 seconds and then reverts to the LG welcome screen. When you try to turn it on it just stays on the LG welcome screen or cuts off. When plugging it up to my Windows 10 PC it shows LGE Android MTP Device in the Device Manager. I've tried to download the Drivers from the LG site and ran the installation on the computer with no change. I've tried to update the drivers from the Device Manager Screen with no change. It also gives you the noise when it connects to the PC. LG UP won't recognize the device and neither with the LG support tool. I have tried everything that I am capable of understanding at this point (which isn't much). I have read about trying to get it into EDL but can not find the correct test points... even if I did find the correct test points I'm not sure if that will even help me to fix the device. I need to breathe some life back into this phone. I hope I did not post this in the wrong place, or violate an XDA rule. I just really need some help... XDA has the most complete guides and accurate information I just can't find it about my particular situation. Anyone's assistance or thoughts (written to a non-techy person/non-developer newbie chic) would be helpful. This is week 3 of me scouring the net for answers. Thank you
Hello everyone! I am in dire need of help.
So I recently decided to acquire a regular Motorola G7 because I had heard its battery is fantastic. This far, I have been loving it.
But silly me decided I wanted to explore OEM boot unlocking to eventually root the device. After successfully completing theses tasks, I installed the TWRP recovery. Sadly, something (must have) went wrong because when I tried to reboot, the phone went into hard brick. Completely unresponsive, holding both power and vol. down button for 2+ minutes did nothing. I basically have exhausted every Internet recommendations thus far and nothing has been fruitful.
I have been able to get the Qualcomm Port 9008 (COM3) to show up in device manager when I hold power and vol. down. Also, the program QPST also recognizes a phone in Sahara download mode (although I have no idea what it means nor what to do with that, if anything).
So here I am, asking for your help. I have read somewhere that a blankflash zip file could allow me to restore my phone but alas, I wasn't able to find any nor would I know what to do with it.
I would greatly appreciate any help.
Regards,
Afireblood.
Edit: I have managed to find a way to potentially salvage my bricked phone, using QIFL tool to flash a stock rom. However, to do so I need some files (which are proper to the Moto G7 - any other would not do). They are:
programmer (firehose?).mbn
rawprogram.xml
patch.xml
If anyone has any clue where I could find that (except everywhere on Google - it hasn't been helpful), I would very much appreciate it!
afireblood said:
Hello everyone! I am in dire need of help.
So I recently decided to acquire a regular Motorola G7 because I had heard its battery is fantastic. This far, I have been loving it.
But silly me decided I wanted to explore OEM boot unlocking to eventually root the device. After successfully completing theses tasks, I installed the TWRP recovery. Sadly, something (must have) went wrong because when I tried to reboot, the phone went into hard brick. Completely unresponsive, holding both power and vol. down button for 2+ minutes did nothing. I basically have exhausted every Internet recommendations thus far and nothing has been fruitful.
I have been able to get the Qualcomm Port 9008 (COM3) to show up in device manager when I hold power and vol. down. Also, the program QPST also recognizes a phone in Sahara download mode (although I have no idea what it means nor what to do with that, if anything).
So here I am, asking for your help. I have read somewhere that a blankflash zip file could allow me to restore my phone but alas, I wasn't able to find any nor would I know what to do with it.
I would greatly appreciate any help.
Regards,
Afireblood.
Edit: I have managed to find a way to potentially salvage my bricked phone, using QIFL tool to flash a stock rom. However, to do so I need some files (which are proper to the Moto G7 - any other would not do). They are:
programmer (firehose?).mbn
rawprogram.xml
patch.xml
If anyone has any clue where I could find that (except everywhere on Google - it hasn't been helpful), I would very much appreciate it!
Click to expand...
Click to collapse
Update: Now in search of the Moto G7 specific blankflash.zip
If anyone knows where I can find that I would really appreciate it!!
I am not familiar with the g7. (I own a G5+). I believe the G7 code name is "river". You can look at https://mirrors.lolinet.com/firmware/moto/river/ and they show a blank flash - but let me say something - a blank flash must be exact for your phone. Its basically the main disk partition with other partitions inside. My phone has 64GB/4GB, and 32GB/3GB-2GB models - so you see a problem. But if all the G7s are the same, then this blank flash should be OK.
Also you can download the phones original firmware at https://mirrors.lolinet.com/firmware/moto/river/official/RETUS/ , if its a US model. If its not, back up 1 directory and you can find it by either carrier or country. You can fastboot the firmware - which I would do before a blankflash,
Hope that helps.