After upgrading my TP firmware - I am no longer able to run any non 3.16 roms.
I have flashed the 3.15ver. TouchPanel firmware back to phone - but if I install any non 3.16 rom - my screen/touchpanel is dead.
It works in TWRP 2.4.1 only.
Is there any way to once again run CM or AOKP?
Thanks, Jack
Sent from my MeanBean optimized and supercharged ElteVO.
midmadn said:
After upgrading my TP firmware - I am no longer able to run any non 3.16 roms.
I have flashed the 3.15ver. TouchPanel firmware back to phone - but if I install any non 3.16 rom - my screen/touchpanel is dead.
It works in TWRP 2.4.1 only.
Is there any way to once again run CM or AOKP?
Thanks, Jack
Sent from my MeanBean optimized and supercharged ElteVO.
Click to expand...
Click to collapse
Nope, you msut use the 3.15 tp driver for 3.15 roms and aokp, cm etc
Sent from my EVO using Tapatalk 2
You say driver. I believe that is part of the rom. I did flash the 3.15 touch panel firmware back to the phone.
I tried the pac-man cm 10.1 rom as well as miui 4.12.
My touchscreen is dead once the phone boots into the rom. It only works in recovery or meanbean 3.2 (3.16) rom.
Sent from my MeanBean optimized and supercharged ElteVO.
Here try this. It is the old touch panel driver, which, according to the meanbean thread, allows you to use non 3.16 roms.
Just flash the PJ75IMG.zip thru bootloader
Credit to mikeyxda and capt. Throwback
http://themikmik.com/showthread.php...o-1-12-11-1210&p=286650&viewfull=1#post286650
Sent from my EVO using Tapatalk 2
bennyboy78 said:
Here try this. It is the old touch panel driver, which, according to the meanbean thread, allows you to use non 3.16 roms.
Just flash the PJ75IMG.zip thru bootloader
Credit to mikeyxda and capt. Throwback
http://themikmik.com/showthread.php...o-1-12-11-1210&p=286650&viewfull=1#post286650
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Thank you very much for trying to help - but I already have that file and have flashed it through bootloader. That's what I was doing. From what was written in the meanbean thread - I should have been good to go. But no luck.
Anyone that flashed the new touchpanel firmware can not run any rom other than meanbean 3.? on or the stock 3.16 rom.
Sent from my MeanBean optimized and supercharged ElteVO.
On reverting the touchpanel - I was being a retard. (No offense meant to any MR persons)
You have to install the rom first and then run the 3.15 touchpanel firmware file.
Case solved. You must flash from the bootloader AFTER any non 3.16 rom install the 3.15 touchpanel firmware/driver.
Thanks to anyone that tried to help.
Jack
Sent from my MeanBean optimized and supercharged ElteVO.
midmadn said:
On reverting the touchpanel - I was being a retard. (No offense meant to any MR persons)
You have to install the rom first and then run the 3.15 touchpanel firmware file.
Case solved. You must flash from the bootloader AFTER any non 3.16 rom install the 3.15 touchpanel firmware/driver.
Thanks to anyone that tried to help.
Jack
Sent from my MeanBean optimized and supercharged ElteVO.
Click to expand...
Click to collapse
Ahh, glad you got the problem solved. Thanks for sharing that info as im sure other people will run into the same problem.
Sent from my EVO using Tapatalk 2
bennyboy78 said:
Here try this. It is the old touch panel driver, which, according to the meanbean thread, allows you to use non 3.16 roms.
Just flash the PJ75IMG.zip thru bootloader
Credit to mikeyxda and capt. Throwback
http://themikmik.com/showthread.php...o-1-12-11-1210&p=286650&viewfull=1#post286650
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
How do you flash from bootloader? i place the file on my phone but i go to bootloader and nothing happens
Edit: NVM im s-on
Related
lets just start with im a super noob...... now to the point i flashed rezrom 4.0.3 3.11.xxxx which i know is ics but ive only used the old firmware patch my bandbase is .095xxxxxx and my hboot is 2.11. 0000..... so if im understanding correctly im still on gb firmware right......but when i tried to flash a gb rom it starts up to the htc screen flicks once then dims then goes to blank screen ive factory rest numerous times before installing any rom........any help would be greatly appreciated thanks
Make sure you flash the boot.img (kernel) that belongs to the rom you are flashing.
Sent from my ADR6425LVW using Tapatalk
this is the rom i was trying to install [ROM] - 3/2 - CleanROM GBE 1.7.5 - Clean, Smooth, Stable, FIXED! and it said at the end of install the kernal was installed.... i tried to install a nan backup of my org.rom and i still got the same thing
i got it i just installed stock 2.01.605.11 kernel and it worked thanks for the help....
Nice... I'm glad you got it running.
Sent from my ADR6425LVW using Tapatalk
Andro X said:
Nice... I'm glad you got it running.
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
I'm having the same issue with all the RUU and roms I'm trying. How did you solve it?
agapedisciple said:
I'm having the same issue with all the RUU and roms I'm trying. How did you solve it?
Click to expand...
Click to collapse
If you are s-on, you have to make sure the kernel/boot.img is flashed after you flash the ROM. If you are trying to flash an RUU, you have to be locked.
Also, if you are on ICS firmware and trying to run a GB ROM, you'll need to flash the newfirmware patch. http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/
Okay, So I've got s-off, unlocked, rooted, all of that stuff going on right now. I've been reading through and I'm so confused on how to upgrade from stock GB to ICS. I see so many methods for different roms, Can someone point me in the direction in I need to go? I'm currently running software number 2.01.605.11 w/ PRI 1.13_002, 1.88_002
Depends what you want to do....
If you dont care for new radios and such, flash an ics Rom of your choosing and then flash the old firmware patch.
If you want new radios run an ics ruu (2 times, 1st time only updates some stuff and you'll have issues unless you do it 2 times) then flash an ics Rom of your choosing.
Also upgrade to amon ra 3.15 if you are on an older version. 3.15 is updated for the changes in ics
Sent from my Rezound
Ok, I would like the latest RUU, but do I flash through recovery, or rename and flash through hboot or something?
EDIT: I currently am running Ra 3.15
Flash through hboot as a ph98IMG
Run it twice then you'll need to put amon ra 3.15 again.
I'll attach a copy of amon ra 3.15..... You can rename it to ph98img and flash it in bootloader the same way. Or you can use whatever way you prefer.
Edit: here's the link
http://db.tt/UuiVjcrb
from my Rezound
Thanks, That's what I thought. I use to be familiar with this when I was using my thunderbolt. But "upgraded" to the LG spectrum and there was absolutely no development for that phone for the 4 months I had it. So I lost touch. BTW never get that phone. I honestly hated it more than any apple product...which to me is a lot of hate
Ok, so I flashed the 3.14.605.5 Ice Cream Sandwich ZIP RUU, I'm still s-off, unlocked and running RA 3.15 . but now it saying I'm not rooted.
Can't you root it again through AmonRa??
I believe there is an issue with ICS. Just flash a rooted stock ROM.
Sent from my ADR6425LVW using Tapatalk 2
LunaticSerenade said:
I believe there is an issue with ICS. Just flash a rooted stock ROM.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
That's what ended up doing after updating to the 3.14 firmware. Just installed the stock rooted 3.14 ROM.
Sent from my S-OFF Rezound using Tapatalk 2.
thanks for the speedy replies people. I'm downloading the stock rooted 3.14 now. so I will let you know if that fixes it
Ok, downloaded stock rooted deodex rom and everything is good. it's recognizing root again
Jlluna87 said:
Ok, downloaded stock rooted deodex rom and everything is good. it's recognizing root again
Click to expand...
Click to collapse
Excellent. An easy fix is always welcome.
Sent from my Sense 4 Rezound.
Is anyone working on making the latest ICS (with latest kernel) work with HBOOT 1.4?
edufur said:
Is anyone working on making the latest ICS (with latest kernel) work with HBOOT 1.4?
Click to expand...
Click to collapse
The latest OTA ICS from sprint works fine with hboot 1.4. Just be sure to flash the right .zip. Try this Here
Basic Sprint Stock Rom, zip-aligned with a few simple extras.
I'm on 1.4 and tribulattifather 's from works (well)
No need to update hboot with his rom like some others do
But does that include the new KERNEL as well? I noticed that the kernel build wasn't listed. Mean ROM is reportedly working for 1.4 as long as you don't take the new kernel. So my question still remains. Is anyone working on a way to make the new release / kernel / firmware work for 1.4?
coal686 said:
New kernel. MikeyXDA put out a new version of meanROM based on the new ota except uses the vm leak kernel. Works fine for older hboots. Flash the new kernel with it, get bootloop if on older hboot.
So I did some further research and to answer your question, no. Nobody has got the new kernel to work with older hboots. If you want to flash the new kernel, why not upgrade your hboot? People have had success doing that, no ill affects. plus its easy to revert to hboot 1.4 if you want.
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
I flashed the Avatar Rom(stable release) using twrp 2.4.1.0 on my evo with the 3.16 firmware. Everything boots up fine but my touch screen does not work and i dont know why. Does anyone know why the touchscreen might not be working?
You have the 3.16 touch panel. You cannot run aosp roms with that. Look for captain throwback's firmware thread and get the 3.15 touch panel. Or get a 3.16 based Rom.
{ParanoiA} said:
You have the 3.16 touch panel. You cannot run aosp roms with that. Look for captain throwback's firmware thread and get the 3.15 touch panel. Or get a 3.16 based Rom.
Click to expand...
Click to collapse
Will the updated versions of any of the aosp roms be based on the 3.16 firmware?
droth21 said:
Will the updated versions of any of the aosp roms be based on the 3.16 firmware?
Click to expand...
Click to collapse
Not with out kernel source
Sent from my EVO using Tapatalk 2
kernel source out
Sent from my EVO
ok so last week i was on here saying that i was having problems flashing roms to my phone. found out that because im s-on (also my hboot is 2.09) most roms i have to flash the kernal. so i was told to get the app flash image gui. i got it, flashed the kernal, it worked, but...... after the rom loaded my touch didnt work. i couldnt unlock the phone at all. so i went back to the previous rom. i tried another rom using the flash image gui and it did the same thing. it was as if the touch imput was gone. any reason why this happened? something i did wrong? thanks
What ROM did you flash and what version of TWRP are you on? If you took the latest OTA to software version 3.16 then you also got an update to the touch panel. Unless you get S-off and downgrade the touch panel, you have to use 3.16 ROM's and TWRP 2.4+.
Sent from my EVO using xda premium
FinZ28 said:
What ROM did you flash and what version of TWRP are you on? If you took the latest OTA to software version 3.16 then you also got an update to the touch panel. Unless you get S-off and downgrade the touch panel, you have to use 3.16 ROM's and TWRP 2.4+.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
the rom is jewel_PAC_JB_4.2.2-v22.0.1_20130401-180210.zip im using the TWRP 2.4 but flashing to 2.5 now
Like fin said, if you had the 3.16 ota on your device, the new touch panel drivers won't allow you to use PAC, you can't use anything but 3.16 based sense ROMs. You really will need to get s-off to enjoy your device. Good luck.
Sent from my EVO using xda premium