Hi guys!
I factory reset my rooted phone using Fastboot Screen.
After that, I also did factory reset using recovery.
I erased all partitions, cache, dalvik cache.
Now, my phone can't get past through the HTC Welcome Screen.
I want to flash another ROM but I can't put the zip file in my phone since I can't open the drive in my PC (it's not appearing in my pc).
Please help me. I want my phone to be usable again. Also, I want to continue to flash a New ROM.
jb07galvez said:
Hi guys!
I factory reset my rooted phone using Fastboot Screen.
After that, I also did factory reset using recovery.
I erased all partitions, cache, dalvik cache.
Now, my phone can't get past through the HTC Welcome Screen.
I want to flash another ROM but I can't put the zip file in my phone since I can't open the drive in my PC (it's not appearing in my pc).
Please help me. I want my phone to be usable again. Also, I want to continue to flash a New ROM.
Click to expand...
Click to collapse
You will have better luck getting responses if you posted in the device specific forum:
http://forum.xda-developers.com/forumdisplay.php?f=1548
Related
Ok so I'm fairly new to the rooting scene, and these forums, but so far everything has been pretty good, except for one small problem. I installed a custom boot logo, and afterwards my phone was lagging a bit. I contacted the boot logo programmer, with no response, so I decided to wipe my system and use the backup from right before I installed the custom boot logo. Unfortunately, the boot logo has not changed, and my phone 'fails' whenever I try to flash something from Odin. Anyone know what to do in this situation.
If you want to do a full wipe of you device,cos it sounds like tha boot logo is corrupt,then boot to recovery and wipe cache partition and dalvik cache.then go to "storage and mounts" and format system,data and cache.Select "Go Back" and factory reset your phone and reboot.If it doesnt go past the boot logo after 1min then pull the battery,put it back in and turn it back on.Its a pain in the arse but it will completely clean up your device and if you where rooted you will need to probably reroot but berfore hand plug in your phone to your PC so it gets recognized again.
EDIT:Just incase,first of all download titanium backup from the market and backup your apps!!!!
Sting Rray said:
Ok so I'm fairly new to the rooting scene, and these forums, but so far everything has been pretty good, except for one small problem. I installed a custom boot logo, and afterwards my phone was lagging a bit. I contacted the boot logo programmer, with no response, so I decided to wipe my system and use the backup from right before I installed the custom boot logo. Unfortunately, the boot logo has not changed, and my phone 'fails' whenever I try to flash something from Odin. Anyone know what to do in this situation.
Click to expand...
Click to collapse
You need to wipe usb storage, sd card, then put phone in download mode, flash stock ROM using Odin. You need to fully wipe everything.
Sent from my Sexynos SGH-i777 using XDA Premium.
I've trying reflashing the stock ROM and kernel; however, it gives me a FAIL and says can't open the serial (COM) port.
I have solved the problem by closing Samsung Kies and wiping the system, thanks for all the help offered.
Figured out that I posted in the wrong section(mods please remove that thread)
Ok guys..... newbie here .... literally I'm new to Boot unlocking, root, Flashing etc.
Anyway I have followed this forum for so long that I decided to take plunge yesterday and get my hands dirty.
Here is what I did:
Unlock bootloader, root and install recovery on my Atrix 4G. Atrix was @ 2.3.4 and 4.5.91 during unlocking & root(rooting & unlock from this thread:http://forum.xda-developers.com/showthread.php?t=1182871)
Rebooted the phone and everything seems to be in place. Atrix loaded like the way I bought it 7 months back. No problem until now.
Also created a restore folder on my external SD. Worked fine and was successful in creating backup with time stamp
Now here are my steps and subsequent issues that I'm facing:
1. Downloaded CM9 zip file from this thread(http://forum.xda-developers.com/showthread.php?t=1500535) along with Gapps to my external SD
2.Entered recovery mode during bootup and tried to flash CM9 and Gapps. Flashing seem to have gone well and completed (note I did not do clear data, clear cache or clear dalvik cache under advanced options being a newbie)
3. Reboot the phone and can only see red Moto logo and unlocked on top. Left for about 5 minutes and nothing happened.
4.Did a battery pull and entered recovery mode. wiped data, cache & cleared dalvik cache
5.Went to Install zip from sdcard option and tried to reflash CM9. Flashing seems to have gone well and completed
6. Reboot phone and again can only see Moto Red logo with unlock on top and nothing more.
7.Battery pull followed by recovery. But This time I tried to restore from my external SD. also wiped data, cache & dalvik cache
8.Restore took about 3 minutes and completed.
9.Reboot the phone. Now the phone boots and goes to Rethink possible screen and get sstuck.
10. Left it for 1 hr....nothing.
11.tried steps 7-9 again and still stuck in "Rethink possible" screen during boot.
12.Entered Recovery mode to try stable Nutrino ROM, same problem (stuck @ M logo screen which says unlocked)
13. Cleared data, cache and tried restore and now my phone boots up with flashing M screen.
What did I do wrong? Did I soft brick the phone? I can still enter recovery mode and read my internal and external SD and can see all files. i hope I didn't brick my phone doing this. If I did, I would regret!
Here are my options:
1.I know there is a way to hide 'unlock' during boot up (if someone can point to it obviously). Hide the 'unlock' and return the phone to ATT and tell them that phone would not boot after 2.3.6 update and get a refurbished one
Please let me know what your thoughts are. I'm currently crapping on my pants
Hmm... I would "fastboot -w", wipe cache/dalvik/data again, and try restoring your nandroid backup. (Or was that your Neutrino attempt?)
OR, do the wipe again and flash a 2.3.6 fruitcake to see if it boots normally. Just to see if there's some issue with your rom download or if it's really the phone.
The only way to hide the unlocked text is to flash an SBF using RSD Lite, which runs the risk of bricking your phone if you flash the wrong version.
Download a Fruitcake from here > http://forum.xda-developers.com/showthread.php?t=1163009 and put it on your sdcard.
reboot to recovery
wipe dalvik
wipe cache
reboot to fastboot
fastboot erase boot
fastboot erase system
fastboot erase userdata
fastboot erase cache
fastboot erase webtop
fastboot erase preinstall
fastboot reboot (to recovery)
flash ROM
reboot
Let your phone sit until it boots up completely, then let it sit for another 10 minutes. Remember, your phone can take 15 minutes to boot up the first time after flashing a ROM, especially if a new kernel was flashed with it.
Yeah I would try a fast boot wipe the whole shabang fastboot -w and then fastboot erase preinstall
Then also erase boot
System
Cache
Userdata
Web top
Then go into cwm and do the wipes you've been doing then flash the rom
Sent from my MB860 using XDA App
jonnyboyC13 said:
Yeah I would try a fast boot wipe the whole shabang fastboot -w and then fastboot erase preinstall
Then also erase boot
System
Cache
Userdata
Web top
Then go into cwm and do the wipes you've been doing then flash the rom
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Think I covered all that already, and fastboot -w just wipes cache and userdata anyway, so no need to do a fastboot -w. What I have in the post before you is the cleanest way to wipe and flash a new ROM.
Thank you....I haven't tried the soft brick fix yet.
But from reading one other thread which had similar problem, it looks like after installing romracer's CWM, things got fixed.
http://forum.xda-developers.com/showthread.php?t=1527453
Will be trying this tomorrow.
Hmm.. this thread seems to be dead..
This treads seems to be dead... I was hoping to get some help with some soft bricked atrix HD... any suggestions?
Pharawer said:
This treads seems to be dead... I was hoping to get some help with some soft bricked atrix HD... any suggestions?
Click to expand...
Click to collapse
This is the Atrix 4G board, not Atrix HD.
ravilov said:
This is the Atrix 4G board, not Atrix HD.
Click to expand...
Click to collapse
Yeah i know, but what i want to know if this method is compatible with a soft bricked atrix HD becaused there isn't much info about this particular phone on the web.
Pharawer said:
Yeah i know, but what i want to know if this method is compatible with a soft bricked atrix HD becaused there isn't much info about this particular phone on the web.
Click to expand...
Click to collapse
No. Totally unreleated hardware. There's an Atrix HD section you can ask in over here, which you clearly already knew about because you've already asked your question in it. Why spam over here? I'm sure somebody who actually knows the device you have will answer your question, but this is not the place to ask it.
Edit: But feel free to flash an Atrix SBF/Fruitcake on your Atrix HD if you'd like to actually brick it.
Pharawer said:
Yeah i know, but what i want to know if this method is compatible with a soft bricked atrix HD becaused there isn't much info about this particular phone on the web.
Click to expand...
Click to collapse
You should take your question back to the HD Thread, a discussion at this one is TOTALLY off topic for this thread due to the entire device being different.
Thanks!
P.S. Closing thread
I've taken on a bit more than qualified I guess as I rooted my att GS3 just fine and flashed a new aokp rom and was up and running but started to have intermitent flickering. It prompted me to reflash rom with CM10 and this is were my problems began. I wiped data/factory reset, cache partition,Dalvik cache, mounts & storage format cache, and accidentally format emmc which I think is my problem. I was able to still reboot to CWM recovery but I can't do much more than that, and now I can't get to CWM recovery mode at all. Have tried to boot and reflash from ex/sdcard no good. PC doesn't recognize phone to do recovery from backup and I didn't do internal backup which I now know was dumb. Is there anything I can do to get back up and running or did I screw myself and have to get a new phone? PLEASE HELP HELP HELP!!!!!!!!!
Buddy... first your phone is ATT GS3. and this forum is for INTERNATIONAL GS3. so if you flashed the rom downloaded from THIS forum than might be possible... the correct forum for your device is here:
http://forum.xda-developers.com/forumdisplay.php?f=1705
I hope and pray your phone will be ok... I love this device...
Hey,
First off i hope i have put this on the right sub forum.
I've been stupid (I Think) I've olso looked around on the forum and the [READ THIS] Got a Boot Loop? Don't post a New Thread!
topic.
I'm using my SGS2 for a year now and was using the ressurexionRimix rom for a while.
I've been plaing around with my phone so i got lots of folder that were not used etc, so I wanted to get it back to factory settings, here is when all went down.
Via Settings-Backup and recovery i gave my phone a factory reset (while using the latest ressurexionremix rom, i think this is the misstake i made) When my phone went into the reboot is got stuck on the splash screen, it kept reapeeting the boot animation.
The second mistake i mad was not puting back my back-up but thought well i want it back to it's first state so i'll use ODIN to flash the stock ROM onto it. now, 4 hours later and about 10 trys with diferent versions of the stock roms i'm still stuck on the boot screen.
I've also tryd flashing a cwm so i could get in cwm recovery, this also without any luck
Does anyone have a idea what to do!?
go back to recovery - mounts andstorage and format the following :
cache, system, data, sdcards if you have it in recovery. reboot
you have a bkank screen as your phone has been wiped. reboot into download mode.
Connect odin and flash a stock rom. reboot and your phone should work provided that you have not damaged the flash chip on the motherboard.
Is this in CWM? the problem is i dont have that anymore because i've flashed it toc stok. I now get in the Android system recovery
The option i get there ar:
Reboot system now
apply update from external storage
Wype data/factory reset
Wipe cache parition
apply update from cash
test redbend fola[FS]
Will try this, thank..will let you know if it worked
Wiped data/factory reset and cache after this i ebooted my phone and i got the message installing application, now i'm in the setup menu. Looks like it is working.
Did'nt realice there was a recovery besides CWM Thank yoy so much Cosmic Blue!!! You saved my life!!
Hello, I am new to the rom installing process. So, what I do is I take the .zip file, drag it onto my phone then I install the .zip on my phone. It says that it works, but when i try and boot it up every single rom gets stuck at boot screen. I'm on a ATT galaxy note 2. Please help me
Installing Roms on Galaxy Note II
Try rebooting the phone, that usually works for me when my phones get stuck booting up.
nigerson said:
Hello, I am new to the rom installing process. So, what I do is I take the .zip file, drag it onto my phone then I install the .zip on my phone. It says that it works, but when i try and boot it up every single rom gets stuck at boot screen. I'm on a ATT galaxy note 2. Please help me
Click to expand...
Click to collapse
There are a few possibilities of what could have happened. The most possible one that I can think of is that you did not Wipe Data/factory rest before flashing your rom. When updating to a new rom, it is most of the time necessary to choose wipe data/factory reset from the recovery before flashing. So what you do now is: 1.Boot into recovery. 2. choose the wipe data/factory reset option(U will loose all ur apps that u have downloaded, your photos music and videos should remain intact tho) 3. Flash your ROM again.
Hope that helps
thank you
geoworld_200 said:
there are a few possibilities of what could have happened. The most possible one that i can think of is that you did not wipe data/factory rest before flashing your rom. When updating to a new rom, it is most of the time necessary to choose wipe data/factory reset from the recovery before flashing. So what you do now is: 1.boot into recovery. 2. Choose the wipe data/factory reset option(u will loose all ur apps that u have downloaded, your photos music and videos should remain intact tho) 3. Flash your rom again.
Hope that helps
Click to expand...
Click to collapse
thank you works perfectly!!!