[Q] AP Fastboot Failure after flashing JB leak - Motorola Droid RAZR

So I Flashed the JB leak that came out around Christmas and whenever I restart my phone it automatically boots into AP Fastboot Flash Mode and says, "(Flash Failure)" anfd goes on to say, "Device is LOCKED." Now I can reboot into the boot selection menu and choose a normal powerup. Is there anyway I can fix this error because I can't seem to root the phone and it's pretty annoying.

You can root your phone, but u need to use the + and - buttons and then proceed with BPtools between the reboots .

mas11 said:
So I Flashed the JB leak that came out around Christmas and whenever I restart my phone it automatically boots into AP Fastboot Flash Mode and says, "(Flash Failure)" anfd goes on to say, "Device is LOCKED." Now I can reboot into the boot selection menu and choose a normal powerup. Is there anyway I can fix this error because I can't seem to root the phone and it's pretty annoying.
Click to expand...
Click to collapse
Try to flash the ICS OTA in RSD and start over, I remember that I had this problem concerned with the CID Or if you did a backup restore it

Related

[Q] Jelly Bean OTA soft brick

So I was playing around with Jelly Bean on my RAZR MAXX and I believe I ended up soft bricking the device. I know that took all of 12 hrs. Anyways how can I fix this?
Edit: I went into the system files to install a different gallery app and eventually when I restarted my phone I got the "encryption unsuccessful" message and asked me to do a factory reset, let's just say that didn't go well it kept popping up, but I am able to get to the fastboot menu.
You're kind of in a pickle right now, then.
DON'T go trying this please, but I believe on ICS, you could fastboot back and have it fail, and then use the update.zip or something like that? I'd go ask Mattlgroff. He may be able to hook you up with an UnstuckJB type deal or something.
I'm pretty much stuck in flashboot
Thanks, all the screen says is:
AP Fastboot Flash Mode (S) (Flash Failure)
0A.74
eMMC Info: Size 16G
To return to normal mode- first press power key to power down
Device is LOCKED, Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Last night I tried to flash ICS with RSD Lite but it failed when it tried to flash the boot.img (I know bad idea)
Any thoughts?
mas11 said:
Thanks, all the screen says is:
AP Fastboot Flash Mode (S) (Flash Failure)
0A.74
eMMC Info: Size 16G
To return to normal mode- first press power key to power down
Device is LOCKED, Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Last night I tried to flash ICS with RSD Lite but it failed when it tried to flash the boot.img (I know bad idea)
Any thoughts?
Click to expand...
Click to collapse
I had a softbrick boot loop.
Flast boot .211 ICS. Then go back into stock recovery. Attempt to install the update. It will fail with a status 7. Wipe cache and factory reset. Install the update again. Worked for me. Unfortunately you will lose root access. No knowing when we will be able to get it back as none of the current methods work.
priddyma said:
I had a softbrick boot loop.
Flast boot .211 ICS. Then go back into stock recovery. Attempt to install the update. It will fail with a status 7. Wipe cache and factory reset. Install the update again. Worked for me. Unfortunately you will lose root access. No knowing when we will be able to get it back as none of the current methods work.
Click to expand...
Click to collapse
See my issue is when I try to fast boot .211 ICS it fails at the boot image
I am going to make aflashable zip so you can use it on 2. system and don't loose the ability to downgrade.
Fixed (for the most part)
So I lost my root and for some reason every time I turn off the phone and restart it brings up the AP Fastboot menu, but I just choose the option to boot normally. Thanks for all the help everyone priddyma's method worked even though the .211 ICS boot image failed.
Hello,
I am having a similar problem with the same error.
I am on Jellybean and was trying to downgrade by to ICS.
and I guess I corrupted the OS from what what I understand.
need some help getting out of this. Thanks in Advance.
I have already tried the following:
1. clear the cache.
2. full wipe and restore
EDIT: NVM all I had to do is select normal boot and it booted up normally.
EDIT2 : I can get past the error screen but whenever I reboot the error screen reappears.

trashed my phone, now it won't boot - need help to restore original ROM

I had JB 4.1.2 on my Razr (Verizon/Motorola stock build).
The phone was rooted but bootloader was untouched.
I used FontChanger to change a secondary font, and upon rebooting it would not get beyond a point in the bootup animation.
A factory reset did not yield success.
There is no 'safe mode' option...
Is there a way to download a zip file to the external SD card and use recovery mode to flash the original ROM?
Thanks!
You don't have safe strap or bootmenu installed?
Sent from my XT910 using xda premium
Go into fastboot mode and use this: http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
dpcole72 said:
I had JB 4.1.2 on my Razr (Verizon/Motorola stock build).
The phone was rooted but bootloader was untouched.
I used FontChanger to change a secondary font, and upon rebooting it would not get beyond a point in the bootup animation.
A factory reset did not yield success.
There is no 'safe mode' option...
Is there a way to download a zip file to the external SD card and use recovery mode to flash the original ROM?
Thanks!
Click to expand...
Click to collapse
Might wanna Try RSDLITE
here's tutorial:
I've tried all that and more.
RSD Lite and finding a ROM (SPYDER) ultimately fails because AP Fastboot states "Phone is LOCKED" and status code 0. To my knowledge, the bootloader can't be broken for the original Razr Maxx, so I have to find a way to get around that...
"AP fastboot flash mode (0) Recipe Failure)"
I did see the qe code go from 1/1 to 0/1 while flashing ROMs with RSD Lite, though...
I did re-flash the original Motorola 98.72.8 JB upgrade via Recovery Mode and using the phone's "install upg from external drive", which I could not do in an earlier attempt, but when rebooting that AP fastboot lock screen appeared right away. Erasing the cache partition then doing a factory reset.
AP fastboot flash mode is v0.77.
RSD Lite is v6.1.5.
what else can I try, if anything?
Thanks!
UPDATE
Oh, I held down all 3 buttons and did another power-up, to get around the AP Fastboot lock screen that keeps showing up - this time I selected "boot normally" -- it is booting into the OS and I am moving forward.
If I reboot again, but if I don't do the three-button salute at the time of powerup, I get the "LOCKED" fastboot screen again. Doing the 3-finger salute and going into 'boot normal' gets around the LOCKED error and all becomes well. Should I count my blessings, as I'll be ditching this phone in a couple months, or should I go for the gold and try to fix this remaining hiccup?
And is it possible to get the qe code back to 0/0?
Thanks!
dpcole72 said:
Oh, I held down all 3 buttons and did another power-up, to get around the AP Fastboot lock screen that keeps showing up - this time I selected "boot normally" -- it is booting into the OS and I am moving forward.
If I reboot again, but if I don't do the three-button salute at the time of powerup, I get the "LOCKED" fastboot screen again. Doing the 3-finger salute and going into 'boot normal' gets around the LOCKED error and all becomes well. Should I count my blessings, as I'll be ditching this phone in a couple months, or should I go for the gold and try to fix this remaining hiccup?
And is it possible to get the qe code back to 0/0?
Thanks!
Click to expand...
Click to collapse
I'd honestly try fixing it, as that'd be a pain in the ass every boot. Did you have plenty of battery when you tried AP Fastboot mode? Being under 15% will cause any effort to flash to fail.

[Q] HELP / PROBLEM - Fastboot Loop and Error flashing with XT910

Hi all, so i´ts my first time here posting but I´ve been following this forums long ago and touching stuff with my phones.
Today (well today... i´m working on this since yesterday) I´ll need the help of the most veteran users since I can´t solve this on my own.
I Have an XT910 Razr Moto. Yesterday I charged it with it being off, but to my surprise when I powered it on, I got the Fastboot screen saying the device is locked. Here´s the complete error:
-----------
AP Fastboot Flash Mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Ok
Ok to Program
Connect USB Data cable.
-----------
So, after getting this, obviously I thought, well, power off, or force power off, then power it on, and lets go... Well, nothing, I constantly get into Fastboot again.
What I figured out is that if I power it off, then hold vol down + vol up and power at the same time, I actually CAN get into boot menu but It will not let me select anything, it will just show it and boot in Safe Mode for me.... Tried factory reset also, so i could backup everything...
After going through all that I decided to give it a try and go for RSD with stock firmwares from sbf.droid-developers.org. I got like 4 and they all stucked at cdt.bin flashing part... Giving me an error about 6/18 process that can´t flash cdt.
So far I´ve tried LOTS LOTS of stuff like some .zip going around there to fix the CDT, with no luck...
THen I ran into this post
http://forum.xda-developers.com/showthread.php?t=1651596
Which was very usefull to have some progress, like completing the flash by erasing some lines in the xml about the cdt. system (cause it hung a lot there and gave error again)...
However, the error still persists, I boot up my damn phone and it goes into AP Fastboot. When i go into Safe Mode I see that everything has been wiped so its like a factory phone now, but still in safe and powering it off won´t make the difference.
I´m kinda desperate and about to throw this phone out of the window. Is there any pro savior out there who can give me more tips?
Thanks!!!!!!!!!
-Musashi- said:
Hi all, so i´ts my first time here posting but I´ve been following this forums long ago and touching stuff with my phones.
Today (well today... i´m working on this since yesterday) I´ll need the help of the most veteran users since I can´t solve this on my own.
I Have an XT910 Razr Moto. Yesterday I charged it with it being off, but to my surprise when I powered it on, I got the Fastboot screen saying the device is locked. Here´s the complete error:
-----------
AP Fastboot Flash Mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Ok
Ok to Program
Connect USB Data cable.
-----------
So, after getting this, obviously I thought, well, power off, or force power off, then power it on, and lets go... Well, nothing, I constantly get into Fastboot again.
What I figured out is that if I power it off, then hold vol down + vol up and power at the same time, I actually CAN get into boot menu but It will not let me select anything, it will just show it and boot in Safe Mode for me.... Tried factory reset also, so i could backup everything...
After going through all that I decided to give it a try and go for RSD with stock firmwares from sbf.droid-developers.org. I got like 4 and they all stucked at cdt.bin flashing part... Giving me an error about 6/18 process that can´t flash cdt.
So far I´ve tried LOTS LOTS of stuff like some .zip going around there to fix the CDT, with no luck...
THen I ran into this post
http://forum.xda-developers.com/showthread.php?t=1651596
Which was very usefull to have some progress, like completing the flash by erasing some lines in the xml about the cdt. system (cause it hung a lot there and gave error again)...
However, the error still persists, I boot up my damn phone and it goes into AP Fastboot. When i go into Safe Mode I see that everything has been wiped so its like a factory phone now, but still in safe and powering it off won´t make the difference.
I´m kinda desperate and about to throw this phone out of the window. Is there any pro savior out there who can give me more tips?
Thanks!!!!!!!!!
Click to expand...
Click to collapse
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
welder73 said:
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
Click to expand...
Click to collapse
I´m from Argentina. And you are totally correct, I downloaded FB files for 4.0.4 , but now I tried running the phone in Safe Mode, went to sys info to take a look at it. And found I have 4.1.2
So question is, from that list you gave me, the "Retail Brazil" should do it? as well as UK retail or any other?? Which one should I chose
Thanks!!!!!!!! a lot
welder73 said:
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
Click to expand...
Click to collapse
Ok so I have made quite a progress here. I was able to get a Brazilian version which is from LATAM and RSD flashed straight like a charm. Now I have the clean new firmware.
And even I can read in the fastboot 0A.77 instead of 0A.74 version
HOWEVER: problem with the Fastboot still persists. Even the phone itself when it restarts goes into Fastboot and when I´m able to make a boot menu I can´t choose anything and it goes directly to Safe Mode.
Now that the system´s """""fixed"""" and I could flash it.... Any tips on taking this off? I cant start the phone in normal mode :S

Ap Fastboot Flash Mode

So here is the thing, the phone can boot, works fine, but i cant flash another software, i am on 4.1.2, and i want to get back to 4.0.4. but as soon as i start flash with rsd it says fail, then it gets to fastboot with flash failure, i found tutorial to get rid of that, where i flash empty radio, and it works, boots fine, but when i enter fastboot again it says : to return to normal mode first press power key to power down. Device is locked, if i try to flash another rom, then i get (flash failure) as well..
weird problem, any ideas ?
You Cannot downgrade to 4.0.4.
From the E

Cant get into RSD mode

I think I bricked my device big time in an effort to return to stock. I flashed 4.5.141 and later got a system update while bootloader was unlocked. I got Failed to boot 4.
Later, I tried to relfash the same 4.5.141 sbf and it failed to flash and I got "Failed to boot 1".
Now, I thought I will try to flash again using RSD lite and tried to get into RSD Mode using Vol Down+Power. I am supposed to see options to navigate to RSD and press Vol Up. The first option appears for half a second and the screen turns off.
I am not sure what this behavior is. However, it stays on if battery is low. It stays in NV Flash mode with a message "Battery too low... blah"
I tried to put into fastboot mode and did "fastboot reboot-bootloader". It rebooted but it does not get into RSD Lite mode. It just shows Failed to boot 1. I know how to fix Failed to Boot 1 issue. But this failure to enter RSD mode is killing..
Any one encountered this? Any help here please?
I got out of this problem by using sbf_flash and unlocked the bootloader (with pudding one). That unlocked my bootloader and my Vol Down+Power menu was accessible. And, I went to recovery, performed a wipe and rebooted.
Voila.. It booted very well. I am now in the latest stock. I went all the way from 2.3.6->4.1->4.4.4->Mokee 5.0 and then back to sweet old stock 2.3.6.
My experience with Atrix had been awesome from 2013 where i installed CM 10. It is a great phone and now it works as a music player for me.

Categories

Resources