I bough a China 10" Netbook with Camera installed with
Android OS 2.2.
Kernel 2.6.32
Build Number v1.5.3
this is what is shows when booting. At the back it is written
CPU: WM 8650 *800MHz
DISPLAY: 10.1" TFT 1024*600
MEMORY: DDRIII 256MB
INPUT: 9v 1.5A
This is what I tried. I download a filed with was .rar zipped containing a folder (script) Formatted my 1GB SD Card, extracted the files to this SD Card. I switched off the netbook, inserted the SD Card and turned it on, whilst pressing down escape and the other key above Tab. I tried to change the key sometimes F12 or F10 etc but it did not help.
Please I need assistance on a step by step procedure. I am used to other OS but new to Android. response my be emailed to [email protected]
Related
I switched sd cards on this 7" zt 180 upad. now when it boots goes though adriod icon then adroid to a blank screen. I tried the reset. When I use the home and power buttoms . a scroll of lines go across the screen , then reports z_image not found.
CPU: ZT-180 Dual core 1GHZ
Upad ZT-180 Google Android 2.2 7 inch ZT-180 Dual core 1GHZ Tablet PC
OS: Android 2.2
RAM: 256MB
Storage: 2GB
Support TF card extend 32GB max
Display: 7 inch TFT resisitive touch screen 1024*600
thanks
You have to flash it.
I used the one from zt 180 news site > look for zt 180 7" > 256.
use a pc (with a sd card slot) extract files to a folder . should be 6/7 files (data>user>system tar's and four others. create a folder called zt-update copy these files to that folder> copy zt-update folder to sd card, with this sd card in slot on zt 180 > push side back button and strat at the same time. You will see the screen shrolling for about 5 minutes. it will reboot and start up. If something is wrong it will cycle. just try an earlrier version. I have 2.2 working fine. except GPS. > usb wifi.
hello all i happen to want to run android on my asus a8n-vm csm. i have downloaded and burned the final version of android x86 which is Android-x86-4.3-devel. when i boot the cd i get to the screen where i can select the boot options but then it goes into detecting android x86 and doesnt get past that point at all. all it does is sit there and fill the screen with loading dots. the setup is an amd athlon 64 3500+ socket 939 overclocked to 2.50ghz, 2gb of ram, 120gb seagate hard drive, 256mb ati radeon x600 video card. what am i to do to be able to install and run the os on this computer. i would like to be able to have an android computer somehow.
Hi,
I own a Bsnl Penta Tpad WS704c Tablet which has the following specification:
1. 1 Ghz Cortex A8 Processor
2. 512 MB RAM
3. 4GB Rom
4. Expandable to 32GB via Micro SD Card
5. HDMI Port
6. One Mini USB and One Full USB 2.0 with Mic Facility
7. VGA Camera
8- Rear camera 2 MP
I was trying to reload this tablet since it was frequently hanging so I have downloaded WS 704c driver software from pantel''s website and extracted the driver files in the Micro SD and tried to install but now the tablet is not working but when plug the charger the led was show, what i do for flash my WS 704c tab. Plz help me
I have different problem see below---------
bsnl penta ws704q how to flash with stock rom..
https://docs.google.com/uc?id=0B-PgmldvsHO5TFk2S01HWXFvaUU
It is just installing softwares like hot sexy babes...even after reset..erase everything...from recovery menu clear cache and clear everything without sim and memory..it has no bakup...still those ****ty software comes after boot...on the home screen installs automaticaly and even downloads automatically after connecting to 3g...I am going to throw this tab to dustbin......el....but I will not ...if you help me..to flash it..or remove that virus with root technique.......
This time i am using HP 15 laptop with 1Tb HDD (32Gb Separate partition for RemixOS), 8Gb RAM, Intel i5, Windows 10 Professional and 2Gb AMD Graphic Card. I downloaded the latest version on Remix OS from Jide.com released on 20/4/2016. Went to the proper instructed installer and everything went perfect but now the problem arises. Installer asked to restart and select RemixOS at boot prompt. It went good but every time hangs at REMIX OS booting logo screen. i am also attaching the screen at which it hangs. please help.
P.S the image attached was the earlier issue.
I downloaded ''release_Remix_OS_for_PC_Android_M_64bit_B2016112101'' and installed it on a Flash disk Kingston microDuo 3.0 32GB. I tested it on my Laptop, an HP 250 G4, with 4GB RAM, 500GB HDD and WIN 10 1607 64 Bit installed on it (BIOS : LEGACY). It loaded correctly, found my wi-fi card and connected to Internet. I installed Google Play and some apps. The only problem was may times the message ''not responding'', but I choose to wait and then all was ok again.
Then, I shut down Remix OS, took the flash drive and connected it to my daughters 2 in 1 Tablet, Lenovo MiiX 3 1030 (2GB RAM, 32GB ROM, WIN 10 1607 Home 32 Bit, but with 64 Bit Intel CPU, BIOS : UEFI), to see if there works also. I entered Boot Setup, choose to boot from flash drive. It loaded correctly, with no error message at all. Although smaller from my laptop, Remix OS playing smoothly on the tablet !! The only problem was that it did not regognised the wi-fi card of the tablet, so I choose to make restart the Remix OS. After the restart appeared a serious problem on the tablet !! The screen, in any mode appears in 3 pieces !! The left one, like mirror the up and down piece, while on the right side appears vertical bars !! Remix OS something done to the monitor or the display card of the tablet. It is hardware, because the 3 pieces appearing and when the tablet is off and I push the power button and appears the battery status, and when I enter in Bios Mode, and when I enter in Windows 10 (so it is not software or driver problem from the Windows side, I think) !!
In both cases, Remix OS did not recognised Bluetooth.
Any suggestions or solution ??
Please help asap, I can't fight my daughter
Thanks in advance
Did you try unplug the battery from the tablet?