[Q] Problem Flashing PAC-Rom 19.9.0 - Galaxy Ace S5830i Q&A, Help & Troubleshooting

Ok, I know this is not the dev section, but I still haven't done the 10-posts rule. So, I am going to post my problem here and see how it goes.
Here it is
I have the previous PAc rom from nims11(http://forum.xda-developers.com/showthread.php?t=1911478) And running great.
Yesterday I tried to upgrade to the 4.2 PAc rom from OldDroid(http://forum.xda-developers.com/showthread.php?t=2141770), and it is failing. The flashing seems to be done successfully, but when it comes to booting, after the bootanimation it get errors like "Setup Wizard has stopped" and it doesn't open at all.
I tried re-flashing, wiping everything, re-downloading in case the dl was corrupted, even reflashing the kernel. But nothing.
Any thoughts?

Are you mad ?? ,PAC rom is'nt for galaxy ace s5830i ...?it is for galaxy ace s5830
Sent from my GT-S5830i using xda app-developers app

Does it boot??
Sent from my GT-S5830i using xda app-developers app

MagicSeeker said:
Ok, I know this is not the dev section, but I still haven't done the 10-posts rule. So, I am going to post my problem here and see how it goes.
Here it is
I have the previous PAc rom from nims11(http://forum.xda-developers.com/showthread.php?t=1911478) And running great.
Yesterday I tried to upgrade to the 4.2 PAc rom from OldDroid(http://forum.xda-developers.com/showthread.php?t=2141770), and it is failing. The flashing seems to be done successfully, but when it comes to booting, after the bootanimation it get errors like "Setup Wizard has stopped" and it doesn't open at all.
I tried re-flashing, wiping everything, re-downloading in case the dl was corrupted, even reflashing the kernel. But nothing.
Any thoughts?
Click to expand...
Click to collapse
This is S5830"i" section.

GT-S5830 or GT-S5830i
so do you have gt-s5830 or gt-s5830i
if gt-s5830i did this rom work

MagicSeeker said:
Ok, I know this is not the dev section, but I still haven't done the 10-posts rule. So, I am going to post my problem here and see how it goes.
Here it is
I have the previous PAc rom from nims11(http://forum.xda-developers.com/showthread.php?t=1911478) And running great.
Yesterday I tried to upgrade to the 4.2 PAc rom from OldDroid(http://forum.xda-developers.com/showthread.php?t=2141770), and it is failing. The flashing seems to be done successfully, but when it comes to booting, after the bootanimation it get errors like "Setup Wizard has stopped" and it doesn't open at all.
I tried re-flashing, wiping everything, re-downloading in case the dl was corrupted, even reflashing the kernel. But nothing.
Any thoughts?
Click to expand...
Click to collapse
What phone do you have? S5830i or S5830? If you have the "I" variant that ROM shouldn't work... and this will need to be looked into, however i believe you're in the wrong section with an s5830
The usual Xx James xX only on mobile (XDA Premium)

Related

[Q] I can't install a new kernel

Hi everyone,
I have VK rom v5.1 installed running Siyah kernel 3.3.1 with some tweaks (I mean using extweaks app) and I've tried to install a new kernel, just to see which one is better batterywise and there's no way, just no way. After wiping cache, dalvik and also clearing init.c folder (which is usually done by defect when installing a new kernel, well, moved), I have tried with NEAK 2.0.5x and 2.0.6x and nothing. I've also tried with speedmod k3-20 and nothing either, it wont boot past the first Samsung logo!!! What can I do??? Any ideas?
I've also done factory reset and reset the extweaks profiles that I've changed, but still nothing, It won't pass the Samsung logo.
(Just another thing. I did change the dpi from 240 to 210 on the build.prop which was worked like a charm and updated from Siyah 3.2.8 to 3.3.1. Thinking that it could be a problem of any kind and desperate as I was I tried as well changing it with no improvement at all).
Cheers
paieneso said:
Hi everyone,
I have VK rom v5.1 installed running Siyah kernel 3.3.1 with some tweaks (I mean using extweaks app) and I've tried to install a new kernel, just to see which one is better batterywise and there's no way, just no way. After wiping cache, dalvik and also clearing init.c folder (which is usually done by defect when installing a new kernel, well, moved), I have tried with NEAK 2.0.5x and 2.0.6x and nothing. I've also tried with speedmod k3-20 and nothing either, it wont boot past the first Samsung logo!!! What can I do??? Any ideas?
I've also done factory reset and reset the extweaks profiles that I've changed, but still nothing, It won't pass the Samsung logo.
(Just another thing. I did change the dpi from 240 to 210 on the build.prop which was worked like a charm and updated from Siyah 3.2.8 to 3.3.1. Thinking that it could be a problem of any kind and desperate as I was I tried as well changing it with no improvement at all).
Cheers
Click to expand...
Click to collapse
Have you tried a kernel cleaning script?
Sent from my GT-P7510 using xda premium
kilometers4 said:
Have you tried a kernel cleaning script?
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
I'm on it
paieneso said:
I'm on it
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?p=19716290
Sent from my GT-P7510 using xda premium
kilometers4 said:
Try this http://forum.xda-developers.com/showthread.php?p=19716290
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
Yep, I was with that one already. Nah, it's not working. It flashes and everything, but when I flash the new kernel it gets stuck on the samsung logo again. I'm starting to think that the kernels are corrupted or sth, but I've tried 3 already and all of them with the same problem. Is it possible I am using the wrong kernels? I mean, the rom is ICS standtard, custom samsung rom, is it not?
paieneso said:
Yep, I was with that one already. Nah, it's not working. It flashes and everything, but when I flash the new kernel it gets stuck on the samsung logo again. I'm starting to think that the kernels are corrupted or sth, but I've tried 3 already and all of them with the same problem. Is it possible I am using the wrong kernels? I mean, the rom is ICS standtard, custom samsung rom, is it not?
Click to expand...
Click to collapse
Yea i believe so. Have you tried flashing a completely new rom altogether? With a full wipe.
You can also try to fix permissions in cwm
Sent from my GT-P7510 using xda premium

questions regarding: ROM][AOSP][JB][4.1.1] SuperNexus - I777 - BUILD 2 [12-08-12]

I recently installed the super nexus i777 ROM on my Galaxy s2 I777. I keep getting the errors:
unfortunately the process "com.google.process.gapps" "android keyboard (AOSP)" "System UI" has stopped. you can either close or report.
I went from Semi v15b w siyah 3.4 kernel to this one (my phone was working perfectly and always has). i completely wiped the phone, wiped the dalvik, wiped the cache... installed the supernexus rom, installed G-apps, and installed Siyah 3.5. at first the phone didnt want to boot up at all. so i went back into my recovery mode (by holding power, vol+/-) and i used the kernel cleaner script and didnt reinstall the jellybean siyah kernel. after that the phone booted up fine after but now im getting those constant errors.
other than those errors, the rom seems to be running very smoothly. and i really like the look of it.
Please help! im not very active on here..i used to be an iphone lover...but not anymore...and for the most part ive never had any problems with any ROM/Kernel ive tried.
Meinnocenthah said:
I recently installed the super nexus i777 ROM on my Galaxy s2 I777. I keep getting the errors:
unfortunately the process "com.google.process.gapps" "android keyboard (AOSP)" "System UI" has stopped. you can either close or report.
I went from Semi v15b w siyah 3.4 kernel to this one (my phone was working perfectly and always has). i completely wiped the phone, wiped the dalvik, wiped the cache... installed the supernexus rom, installed G-apps, and installed Siyah 3.5. at first the phone didnt want to boot up at all. so i went back into my recovery mode (by holding power, vol+/-) and i used the kernel cleaner script and didnt reinstall the jellybean siyah kernel. after that the phone booted up fine after but now im getting those constant errors.
other than those errors, the rom seems to be running very smoothly. and i really like the look of it.
Please help! im not very active on here..i used to be an iphone lover...but not anymore...and for the most part ive never had any problems with any ROM/Kernel ive tried.
Click to expand...
Click to collapse
Fairly certain siyah 3.5 isn't a jb
Sent from my SGH-I777
122ninjas said:
Fairly certain siyah 3.5 isn't a jb
Sent from my SGH-I777
Click to expand...
Click to collapse
i just caught that. i am putting on 4.1 now.
Is this not the 3rd or 4th thread dedicated to this one rom? Search before you post
Sent from team Pirate! Using Tapatalk 2
i did search, thank you very much.
nothing came up in regards to the errors im getting.
Meinnocenthah said:
i did search, thank you very much.
nothing came up in regards to the errors im getting.
Click to expand...
Click to collapse
Technically if you had looked out would have seen siyah 3.5.1 was your problem
Sent from my SGH-I777
122ninjas said:
Technically if you had looked out would have seen siyah 3.5.1 was your problem
Sent from my SGH-I777
Click to expand...
Click to collapse
You didn't need to make a new thread. Your question was relevant to others with that rom so why not post in the thread?
Sent from team Pirate! Using Tapatalk 2
had you read my entire post, i did catch the siyah thing i changed to the v4....but thats not the problem...it did not fix the errors i keep getting with the supernexus rom
Now im still getting the errors, ive even changed to another rom/kernel (mystic glory w the kernel includedin the ROM)
now that im using Mystic Glory, im still getting "unfortunately (exchange service etc...) has stopped"
Nick281051 said:
You didn't need to make a new thread. Your question was relevant to others with that rom so why not post in the thread?
Sent from team Pirate! Using Tapatalk 2
Click to expand...
Click to collapse
I'm confused what do you mean?
Sent from my SGH-I777
Meaning even though his question hasn't been asked in that ROM thread, it would have been better paved there instead. Too late now. Now sometimes gotta help him!
Clay
Team Pirate
Sent from my PINK SGH-I777
clay101eve said:
Meaning even though his question hasn't been asked in that ROM thread, it would have been better paved there instead. Too late now. Now sometimes gotta help him!
Clay
Team Pirate
Sent from my PINK SGH-I777
Click to expand...
Click to collapse
This^ it's not necessary to make a million threads asking about the same rom
Sent from team Pirate! Using Tapatalk 2
as a new user, i cannnot post in the development forum
and i still havent had my question answered... I installed supernexus, with siyah 4. i keep getting constant errors (unfortunately (gapps, android keyboard etc..)has stopped)
so i wiped off supernexus in recovery... installed mystic glory as its packaged on here....still getting errors.
i was on semiv15b w siyah 3. with no problems.
is the problem my phone or the rom/kernel?
Meinnocenthah said:
as a new user, i cannnot post in the development forum
and i still havent had my question answered... I installed supernexus, with siyah 4. i keep getting constant errors (unfortunately (gapps, android keyboard etc..)has stopped)
so i wiped off supernexus in recovery... installed mystic glory as its packaged on here....still getting errors.
i was on semiv15b w siyah 3. with no problems.
is the problem my phone or the rom/kernel?
Click to expand...
Click to collapse
Go back to stock and then flash again and see if it happens. Also, clear data for all those apps and see if that helps
Meinnocenthah said:
as a new user, i cannnot post in the development forum
and i still havent had my question answered... I installed supernexus, with siyah 4. i keep getting constant errors (unfortunately (gapps, android keyboard etc..)has stopped)
so i wiped off supernexus in recovery... installed mystic glory as its packaged on here....still getting errors.
i was on semiv15b w siyah 3. with no problems.
is the problem my phone or the rom/kernel?
Click to expand...
Click to collapse
Not talking about the dev thread, there's like 4 threads on questions about this rom, it's ridiculous.
Sent from team Pirate! Using Tapatalk 2
error
hi ,,,currently using sgs3 with jb ,i tried to flashed with supernexus and it is keep saying "error while get signature from whole system",,,,plz give me a solution
abilash001 said:
hi ,,,currently using sgs3 with jb ,i tried to flashed with supernexus and it is keep saying "error while get signature from whole system",,,,plz give me a solution
Click to expand...
Click to collapse
How about going to your own damn forum and not ours
Sent from Team Pirate! Using Tapatalk 2
abilash001 said:
hi ,,,currently using sgs3 with jb ,i tried to flashed with supernexus and it is keep saying "error while get signature from whole system",,,,plz give me a solution
Click to expand...
Click to collapse
Did u by chance fail? Or mistype? As Nick said this is the sgs2 forum.
Did you flash ics gapps? This happened to me, and that was the issue. Ics gapps right above jb gapps, and a cracked screen.
I777 gets it done, gnex just for fun

[Q] About new neatRom

Hey, asking here as i am new and xda wont let me post in their specific forum...anyways, tried to install newest neatRom, and did ROMnuke before that..got "installation aborted (bad)"...any idea where is the problem? I m coming from cm 10.1...
solved
Truman82 said:
Hey, asking here as i am new and xda wont let me post in their specific forum...anyways, tried to install newest neatRom, and did ROMnuke before that..got "installation aborted (bad)"...any idea where is the problem? I m coming from cm 10.1...
Click to expand...
Click to collapse
Problem was solved by freeing more space and installing Philz kernel
I have neatrom 4.0. Flashed 4.1 and now i don´t have multiwindow, the top bar has dissapear and i can´t change the wallpaper.
Have tried with and without wipe.
Any ideas?
jona_baires said:
I have neatrom 4.0. Flashed 4.1 and now i don´t have multiwindow, the top bar has dissapear and i can´t change the wallpaper.
Have tried with and without wipe.
Any ideas?
Click to expand...
Click to collapse
what rom are you coming from ?
what kind of wipe did you do ?
I tried full wipe (data and cache).
Coming from neatrom 4.0.
Sent from my GT-I9100 using XDA Premium HD app
Update: after installing the ROM, phone told me my sim card couldn't be found.. Same problem which made me root the phone in the first place. I mean the stock ROM had very same issue on my phone. I tried few different modems, no luck. On top of that I got extended battery kit and the new ROM ate battery from 100% to 0% in one night in idle mode. Went back to cm10.1, now all working again
Sent from my GT-I9100 using xda app-developers app

[Q] Help please, S2 cant load roms as usual

Hi there,
Can you please help me, I am a NOOB and I been looking and trying to fix my phone for a week and I cant work it out, therefore I come here seeking your help, I would very much value ideas or solutions you could provide.
I will be as brief as possible.
When I try to flash a new Rom, my phone gets stuck on the boot screen, there are only two roms that load, one freezes, the others roms wont boot.
All started like this:
I originally had RR JB V3.1.3 AOKP 4.2.1 I9100
Then changed to
AllianceROM_I9100_XWLSS_V8, look good but thought of trying the aokp i9100 jb-mr1 milestone-1, when trying to swap I made the mistake of doing a factory reset to find out that I could not access the roms on my sdcard.
so I then installed (I9100_CODE_I9100XXLP2_CL57619_REV02_user_low_ship.tar) it all worked as it went to stock. I rooted the phone again, tried installing the AllianceRom, but it didnt want to load, tried the Aokp again it did work, but then once the screen turns off it wont respond...
tried super nexus, did not want to work. tried updating CMW, it doesnt want to... Tried Jellybam, did not load...
So I tried and reloaded RR JB V 3.1.3 as I already have and it works, it is the only rom that works successfully, But if I try to go on to CMW, it doesnt work anymore, and it seems that once I try to use CMW it makes the rom unstable... So it seems that I can only use one Rom at the moment. Clearly I must of done something wrong at some point but I dont know what. I dont even know what to search for to fix it.
I tried different tools to see if they would help and no luck, such as, GS2ROMNuke, Romreset and Romwipe, Darkside cache and superwipe.
I hope someone can help me out in working out what I did wrong or what is happening.
Thank you so much for your time and help.
Bump, Any help would be very much appreciated.
Thnaks
Bumping inside 24 hrs is not permitted.
MistahBungle said:
Bumping inside 24 hrs is not permitted.
Click to expand...
Click to collapse
Thanks for letting me know... Will keep that in mind next time.
Try kernel nuke then flash another kernel say siyah as its got cwm. Should be good then mate. Then install alliance rom. Also when you installed and booted for first time on these roms did you try wipe cache and dalv cache fix Permission ??
sent from my I9100 Alliance v8
andrewwright said:
Try kernel nuke then flash another kernel say siyah as its got cwm. Should be good then mate. Then install alliance rom. Also when you installed and booted for first time on these roms did you try wipe cache and dalv cache fix Permission ??
sent from my I9100 Alliance v8
Click to expand...
Click to collapse
Thanks for the tip... I did try however I dont have access to cwm anymore once I install RR.
The only way I can get CWM to work again, is installing speedmod-kernel-s2-k2-21- through Odin but then the rom doesnt work anymore.
I tried the kernel nuke, I have tried installing siyah kernel with RR, but no luck it doesnt go into cmw. keep getting a message Kernel Panic...
anymore suggestions?
Could I have done something on the mounts? I dont know, but I cant think of what is going on.
Could it be that my phone has emmc brick?
I came across two apps
Got Brickbug?
Verdict
Danger! This eMMC chip is known to have the brick bug!
and
eMMC check
Brick Bug?
Yes. Insane chip....
Could someone please give me an indication what this means for me? Thanks
Yes, it's sticked in the general forum.
Sent from the little guy
gastonw said:
Yes, it's sticked in the general forum.
Sent from the little guy
Click to expand...
Click to collapse
Thanks mate!!!
One final question, why is it that the RR Rom is the only one to work rather well? (CMW does not work once the rom is intalled)
Thanks heaps!
Where did you hear that?
Sent from the little guy
gastonw said:
Where did you hear that?
Sent from the little guy
Click to expand...
Click to collapse
RR is runing rather well,I have tried it... I have currently stock installed and it is working just fine....
Any ideas? Thanks
swifteagle said:
RR is runing rather well,I have tried it... I have currently stock installed and it is working just fine....
Any ideas? Thanks
Click to expand...
Click to collapse
"Serenity now, insanity later"
gastonw said:
"Serenity now, insanity later"
Click to expand...
Click to collapse
hahahaha, so is my s2's chip insane?
Thanks
swifteagle said:
hahahaha, so is my s2's chip insane?
Thanks
Click to expand...
Click to collapse
Yes, but you don't need to worry (as long as you're not on 4.0.4), and that's that.
gastonw said:
Yes, but you don't need to worry (as long as you're not on 4.0.4), and that's that.
Click to expand...
Click to collapse
Thanks...Fantastic!!!

[Q] Cant install any ROM on my Phone or even perform a Nandroid Backup

Ive tried installing the 4.4.2 ROM Achidroid N7000 on my phone using TWRP but it skipped the MD5 check and said "Installation failed/aborted....". I then tried an AOSP 4.4.2 ROM but it said the same error message. After that, I gave up and tried to use the phone. When it booted up, it froze on the Samsung logo and wouldnt boot up completely. Ive tried doing a FDR through the custom recoveries but still the same thing happens. I really dont know what to do. I have an i9300 under 4.3.
Any help would be appreciated. Thank you.
Follow the guide in general forum on how to flash a stock firmware, download the latest one for your country from sammobile.com.
Factory reset after flashing in recovery.
Sent from my GT-I9300 using Tapatalk
jheayahr said:
Ive tried installing the 4.4.2 ROM Achidroid N7000 on my phone using TWRP but it skipped the MD5 check and said "Installation failed/aborted....". I then tried an AOSP 4.4.2 ROM but it said the same error message. After that, I gave up and tried to use the phone. When it booted up, it froze on the Samsung logo and wouldnt boot up completely. Ive tried doing a FDR through the custom recoveries but still the same thing happens. I really dont know what to do. I have an i9300 under 4.3.
Any help would be appreciated. Thank you.
Click to expand...
Click to collapse
I dun think archi developed any rom for the N7000. At least I didn't see any when googling. But if you flashed a N7000 rom on ur phone, even if u finally unbrick it, I bet there will be some hardware issues.
JellyYogurt said:
I dun think archi developed any rom for the N7000. At least I didn't see any when googling. But if you flashed a N7000 rom on ur phone, even if u finally unbrick it, I bet there will be some hardware issues.
Click to expand...
Click to collapse
That should be a typo its n7100 which is the port for our s3 from international note 2
Sent from my GT-i9300
The first page alr said tat the rom is VERY buggy and is in the experimental state. Many things are not working in tat rom. So I have no idea why some one would wan it as their daily driver rom.
Issue Solved
Thank you guys. I was able to flash the ROM properly using PHILZ recovery.

Categories

Resources