I have a bricked i9300 galaxy s3 16gb,i have it bricked 3 months or more...i want to resurrect it, but i dont know how... Please, help, I had flashed every kind of roms but it doesn´t starts,it continuously reboot in the samsung screen,i delete ALL in the odin but without any success... Please help me, i am not a developer,I am a spanish 18 years old and I am very lost...please help...
I tryed to flash the stock rom of samsung
I9300XXELLC
I tryed to flash the "unbrick" method of the 2nac program but it fails when it starts to flash (it fails when he beggins to flash "boot.img")
http://www.2nas.com/index.php/site/page?view=howto#unbrick
I tryed to flash the resurrect rom to unbrick it
http://checkrom.com/threads/resurrection-odin-checkrom-evohd™-v4.896/
And all this methods of unbrick failed. Now, I am trying to flash this
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
This is the message of odin when I flash the files
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don´t know why it fails, because when i flash only a PDA file,the stock rom for example,it flash perfectly, but when I flash other files it fails.
Somebody can help me??? PLEASE...
you should flash a stock FW via odin.
just make sure before starting odin you need to close all kies processes via task manager, this could lead to the failed operation.
GL
i tried it but it fails... :S
eytan123 said:
you should flash a stock FW via odin.
just make sure before starting odin you need to close all kies processes via task manager, this could lead to the failed operation.
GL
Click to expand...
Click to collapse
when i flash it,the process is success but after the flash,when I try to turn the device on just restarts over and over again when it reaches the samsung screen, the animated image, not the "samsung galaxy s3" beggining image
Go into recovery and do a reset after the flash
1) Flash a stock ROM via ODIN
2) If it keeps restarting at the Samsung logo, go into recovery (turn the phone off and then hold volume up + home button + power button until the Android appears) and factory reset/wipe data.
3) Restart
DeadSOL said:
1) Flash a stock ROM via ODIN
2) If it keeps restarting at the Samsung logo, go into recovery (turn the phone off and then hold volume up + home button + power button until the Android appears) and factory reset/wipe data.
3) Restart
Click to expand...
Click to collapse
after the flash i cant enter to recovery mode...
davidmartins said:
after the flash i cant enter to recovery mode...
Click to expand...
Click to collapse
You will need to flash 3 things
1. Stock firmware
2. Cf auto root
3. CWM recovery touch
And then enter into recovery and make a reser
Sent from my GT-I9300
Recovering a bricked Galaxy S3
davidmartins said:
I have a bricked i9300 galaxy s3 16gb,i have it bricked 3 months or more...i want to resurrect it, but i dont know how... Please, help, I had flashed every kind of roms but it doesn´t starts,it continuously reboot in the samsung screen,i delete ALL in the odin but without any success... Please help me, i am not a developer,I am a spanish 18 years old and I am very lost...please help...
I tryed to flash the stock rom of samsung
I9300XXELLC
I tryed to flash the "unbrick" method of the 2nac program but it fails when it starts to flash (it fails when he beggins to flash "boot.img")
http://www.2nas.com/index.php/site/page?view=howto#unbrick
I tryed to flash the resurrect rom to unbrick it
http://checkrom.com/threads/resurrection-odin-checkrom-evohd™-v4.896/
And all this methods of unbrick failed. Now, I am trying to flash this
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
This is the message of odin when I flash the files
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don´t know why it fails, because when i flash only a PDA file,the stock rom for example,it flash perfectly, but when I flash other files it fails.
Somebody can help me??? PLEASE...
Click to expand...
Click to collapse
I've got a Galaxy S3 which goes into a reboot loop from time to time and I found this which should help you:
http://reviews.cnet.co.uk/mobile-phones/how-to-recover-a-bricked-samsung-galaxy-s3-50009490/
I'd be interested to know if it solves your problem.
JohnOfStony said:
I've got a Galaxy S3 which goes into a reboot loop from time to time and I found this which should help you:
http://reviews.cnet.co.uk/mobile-phones/how-to-recover-a-bricked-samsung-galaxy-s3-50009490/
I'd be interested to know if it solves your problem.
Click to expand...
Click to collapse
Sorry but...I´ve done it and it reboots like before... Really thank you even so...
Problem...
I think i fried the EMMC... because when i try to flash the pit it doesn´t works...
But when I try to flash a PDA file, the stock rom, it flash succesly, but after the flash, it reboots continuously... i think the partition of bootloader is the bad flashed here...
If you´ve got other pit files can you post here the url? Thanks!
davidmartins said:
I think i fried the EMMC... because when i try to flash the pit it doesn´t works...
But when I try to flash a PDA file, the stock rom, it flash succesly, but after the flash, it reboots continuously... i think the partition of bootloader is the bad flashed here...
If you´ve got other pit files can you post here the url? Thanks!
Click to expand...
Click to collapse
When stock rom has flashed by odin each write is verified and if any error is found will be logged in odin textarea.
So, probably problem is not emmc.
The common cause to boot loop is data partition has been corrupted.
To solve is necessary format data partition.
To boot direct in recovery mode, use the combination volume_up+home+power.
Use recovery menu to issue the factory reset.
davidmartins said:
I have a bricked i9300 galaxy s3 16gb,i have it bricked 3 months or more...i want to resurrect it, but i dont know how... Please, help, I had flashed every kind of roms but it doesn´t starts,it continuously reboot in the samsung screen,i delete ALL in the odin but without any success... Please help me, i am not a developer,I am a spanish 18 years old and I am very lost...please help...
I tryed to flash the stock rom of samsung
I9300XXELLC
I tryed to flash the "unbrick" method of the 2nac program but it fails when it starts to flash (it fails when he beggins to flash "boot.img")
http://www.2nas.com/index.php/site/page?view=howto#unbrick
I tryed to flash the resurrect rom to unbrick it
http://checkrom.com/threads/resurrection-odin-checkrom-evohd™-v4.896/
And all this methods of unbrick failed. Now, I am trying to flash this
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
This is the message of odin when I flash the files
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don´t know why it fails, because when i flash only a PDA file,the stock rom for example,it flash perfectly, but when I flash other files it fails.
Somebody can help me??? PLEASE...
Click to expand...
Click to collapse
Dear Brother I think u flash stock recovery 1st and then try to flash new rom.then f-reset and restart,mey bit solve.sorry 4 my bad English.find zip 4 sotck recovery
sam77744 said:
Dear Brother I think u flash stock recovery 1st and then try to flash new rom.then f-reset and restart,mey bit solve.sorry 4 my bad English.find zip 4 sotck recovery
Click to expand...
Click to collapse
flash via odin
I've tried same as davidmartins but all failed w/ the same Odin log.
Initial rom on my S3 was I9300XXLEF (Hong Kong) and I flashed Samsung Galaxy S III GT-I9300 Stock Firmware Collection I9300XXEMA2 after that it didn’t re-boot because of wrong ROM, if I try to get into recovery it shows the “Firmware upgrade encountered issue. Please select recovery mode in Kies & try again” screen.
I tried also to re-flash the Stock FW but failed too.
Any further advise to bring my S III back to life would be highly appreciated.
Cheers.....LinChina
your motherboard are dead .. I had the same problem with an HTC HD2. motherboard has failed without doing something wrong.
andreivibefm said:
your motherboard are dead .. I had the same problem with an HTC HD2. motherboard has failed without doing something wrong.
Click to expand...
Click to collapse
i will do a JTAG in a week.If it doesn´t works, I will buy another galaxy s3 T.T
davidmartins said:
i will do a JTAG in a week.If it doesn´t works, I will buy another galaxy s3 T.T
Click to expand...
Click to collapse
y havet same isuse bat y resolvet . try to flash diferent cw recovery and then the room
sory for bad eng.
Related
<ID:0/040> Removed!!
<ID:0/040> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100GZCKH4_CL484595_REVr07_user_low_ship.t ar.md5 is valid.
<OSM> CODE_I9100GZCKH4_CL484595_REVr07_user_low_ship.tar .md5 is valid.
<OSM> MODEM_I9100GZCKH4_REV_00_CL1050825.tar.md5 is valid.
<OSM> GT-I9100G-CSC-MULTI-OZHKH4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/040> Odin v.3 engine (ID:40)..
<ID:0/040> File analysis..
<ID:0/040> SetupConnection..
<ID:0/040> Initialzation..
<ID:0/040> Set PIT file..
<ID:0/040> DO NOT TURN OFF TARGET!!
<ID:0/040> Get PIT for mapping..
<ID:0/040> Firmware update start..
<ID:0/040> MLO
<ID:0/040> NAND Write Start!!
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any solution ?
hey quickgsm
are you using a Chinese version of i9100g.because flashing chinese firmware with odin will only work for chinese i9100g not i9100g of any other country.post details about your i9100g.
darkshadow1997 said:
hey quickgsm
are you using a Chinese version of i9100g.because flashing chinese firmware with odin will only work for chinese i9100g not i9100g of any other country.post details about your i9100g.
Click to expand...
Click to collapse
i try to flash by many firmware if i use I9100GXXLPN_I9100GXEFLPN_XEF_2 or I9100GXXLPN_XEFLPN_France_Android_4.0.3 flash working 100% but phone stuck on samsung logo and if i use this firmware I9100GZCKH4 i jet error :
<ID:0/040> Firmware update start..
<ID:0/040> MLO
<ID:0/040> NAND Write Start!!
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PS : my I9100G from france
why did you tick repartition for? un-tick taht option
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
omg why did you tick all????
only tick PDA file and put in the firmware
ad_ek said:
why did you tick repartition for? un-tick taht option
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
omg why did you tick all????
only tick PDA file and put in the firmware
Click to expand...
Click to collapse
same issue if i don't tick repartition
quickgsm said:
same issue if i don't tick repartition
Click to expand...
Click to collapse
only tick the pda
nothing else
n try to flash a gb firmware firstly and thn try to flash ics
Devices-
Samsung galaxy s2 i9100g (Cm9-Nightly build)
sony walkman 8 ( Cm9 Stable )
Blackberry 9300 cracked for bbm
Press thnks if i tried to help
im not sure which guide you are following. but the normal procedure to flash firmware with odin is only using ODIN is to only tick the PDA option. and insert the firmware file which you have downloaded.. im trying to
help you ...but if you are getting mad...its ok. you can find your way.
ad_ek said:
im not sure which guide you are following. but the normal procedure to flash firmware with odin is only using ODIN is to only tick the PDA option. and insert the firmware file which you have downloaded.. im trying to
help you ...but if you are getting mad...its ok. you can find your way.
Click to expand...
Click to collapse
yup your right ad_ek ..just use the pda option and dont touch other thing...can your phone boot to eg: recovery or download mode?use pit only when your phone is in soft brick state..if fail again try reboot your pc/change usb port and try again
Wonder why OP tick so many for what. Just tick PDA.. that it. Don't touch other things.
PIT only required if your phone is softbrick.
Chinese ROM
Looks like you have a Chinese phone with the locked bootloader, go back to stock for now.
-delete-
In my case it is only one file .tar.md5 can fix soft brick ?!!
i think it's better to flash a 3 part, since sometimes in a soft brick, a single files doesn't work , but a 3 file can fix soft brick
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
quickgsm said:
In my case it is only one file .tar.md5 can fix soft brick ?!!
i think it's better to flash a 3 part, since sometimes in a soft brick, a single files doesn't work , but a 3 file can fix soft brick
Click to expand...
Click to collapse
Sorry, but just flash the tar.md5 file as pda in odin. I really suggest not to think but to follow the instructions given.
quickgsm said:
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
Click to expand...
Click to collapse
Try to find the stock kernel for the chinese ICS...last time i had this situation i was able to flash the kernel even i could not get in download mode.
Don't panic. I am sure that the ppl around will help you so that you don't come out with an expensive paperweight
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPN_I9100GXXLPN_I9100GXEFLPN_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> MLO
<ID:0/010> NAND Write Start!!
<ID:0/010> Sbl.bin
<ID:0/010> param.lfs
<ID:0/010> factoryfs.img
<ID:0/010> zImage
<ID:0/010> modem.bin
<ID:0/010> cache.img
<ID:0/010> hidden.img
<ID:0/010> RQT_CLOSE !!
<ID:0/010> RES OK !!
<ID:0/010> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/010> Removed!!
phone still show Samsung galaxy S2 GT-I9100G can help me to fix it ?
Which is your problem right now?
Yesterday I was flashing with Odin v1.85 and it was a total mess. I had NAND Write error like you had. I downloaded Odin v1.7 and I got my S2 back alive.
But with your last log, it flashed, so I don't understand what's your problem. Doesn't boot?
antonio1475 said:
Which is your problem right now?
Yesterday I was flashing with Odin v1.85 and it was a total mess. I had NAND Write error like you had. I downloaded Odin v1.7 and I got my S2 back alive.
But with your last log, it flashed, so I don't understand what's your problem. Doesn't boot?
Click to expand...
Click to collapse
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
quickgsm said:
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
Click to expand...
Click to collapse
It just keeps in the first boot screen with/without a yellow triangle and the name Samsung and the model in white letters?
Please be a little more clear and descriptive so we can be sure what you are talking about
my problem :
the phone got stuck at boot up screen after the update showing the message Samsung Galaxy S2 GT-I9100G. Please provide the solution for this.
quickgsm said:
my problem :
the phone got stuck at boot up screen after the update showing the message Samsung Galaxy S2 GT-I9100G. Please provide the solution for this.
Click to expand...
Click to collapse
OK. So download a stock firmware for your model, which I guess you already have by the first post, and download Odin v1.7 (http://www.mediafire.com/?jyyux6yxem8uojn).
Use Odin v1.7 to flash just PDA (the CODE file). If doesn't boot (if it says error flashing let me know), try changing USB port (remember to reboot the device in download mode each time you want to flash with Odin).
If not, add the other files but without PIT. Finally if it doesn't boot, try with PIT too.
Let me know your progress. Best luck
Hi all. I thing my phone is struggeling to survive.
First I'll give you some background info:
Phone is SGS3 I9300.
[ROM] Has been running Omega Rom since one of the first versions. Been running v32 since it was released (not v32.1)
[Kernel] Been running Omega's tweaked stock kernel most the time, but installed SiyahKernel 1.7rc3 some days ago.
About a week ago I recieved a 64gb SanDisk MicroSDXC card and installed Mittiadj's ExtSD2InternalSd script.
[recovery] CWM V6.0.1.2
So, what happened?
Well, when I installed the extsd2internal it wouldn't apply on boot, so per his guide, I installed Script Manager and got it working.
Some days ago I wiped system, flashed omega 32, flashed siyah kernel and flashed the extsd2internal for custom kernels.
Now the script worked without script manager.
After I installed Siyah, the phone reboted twice, about a day or 2 apart. The 3rd time it rebooted automatically, it did not manage to boot again (stopped at the Siyah boot logo,the purple eye).
From here, I switched the phone off, and using vol-up+home+power, I am SOMETIMES able to get into recovery. However, in recovery, I am able to flash cache but not dalvik, I tried flashing Omega, but it froze during the install wizard, I tried wiping system (for another attempt at Omega) but it rebbots then also.
Now the phone only gets to the White Samsung logo or to recovery (but recovery only shows version and the text)
E: can't mount /cache/recovery/command
Click to expand...
Click to collapse
If I hold vol-down+home+power, I get to a question if I want to install Custom ROM, vol down for cancel, up for yes. Pressed down.
Warning!! A custom OS can cause critical....
If you want to download a custom OS, press the volume up key, otherwise, press volume down
Click to expand...
Click to collapse
Where can I go from here?
What has gone wrong?
I am suspecting the memory chip is fubar, but hope someone can tell me otherwise
For the record, I have tried booting with and without sim and microsd, no change comes from that.
In the mean time I guess it's time to resurrect the god'ol Nexus One
Requiem87 said:
Hi all. I thing my phone is struggeling to survive.
>>>>>>
f I hold vol-down+home+power, I get to a question if I want to install Custom ROM, vol down for cancel, up for yes. Pressed down.
Quote:
Warning!! A custom OS can cause critical....
If you want to download a custom OS, press the volume up key, otherwise, press volume down
This reads as totally bolocksd firmware and recovery .
Remove SD card and format it in windows as FAT 32 .
Boot to download mode and flash stock rom via Odin as alternative is a non warranty repair .
jje
jje
Click to expand...
Click to collapse
JJEgan said:
Requiem87 said:
Hi all. I thing my phone is struggeling to survive.
Remove SD card and format it in windows as FAT 32 .
Boot to download mode and flash stock rom via Odin as alternative is a non warranty repair .
Click to expand...
Click to collapse
Tried flashing CWM via ODIN, but get an error after Writing stage. (i shoulden't have done that, because before the flash counter was 0, and it showed stock, after it shows as modified
Any reason to believe that flashing a stock rom will work better than flashing CWM?
Click to expand...
Click to collapse
Confused flashed CWM >> do you mean root ???
Stock rom has a kernel and would at least be on the right road for a warranty repair .
jje
JJEgan said:
Confused flashed CWM >> do you mean root ???
Stock rom has a kernel and would at least be on the right road for a warranty repair .
jje
Click to expand...
Click to collapse
Phone is allready rooted, as i had Omega Rom installed.
CWM means ClockWorkMod Recovery. I allready had that installed to, but as i wrote in first post, I had trouble getting it into recovery mode.
Nothing's changed in that regard tho
Update:
Tried flashing a stock rom via Odin, and this is the error message I get:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ4_I9300TENDLJ3_I9300XXDLID_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Requiem87 said:
Phone is allready rooted, as i had Omega Rom installed.
CWM means ClockWorkMod Recovery. I allready had that installed to, but as i wrote in first post, I had trouble getting it into recovery mode.
Nothing's changed in that regard tho
Update:
Tried flashing a stock rom via Odin, and this is the error message I get:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ4_I9300TENDLJ3_I9300XXDLID_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
not looking so good - I think I would have another go at flashing stock - my AV/ firewall sometime stop odin trying disabling them - I suspect it wont help but hopefully it will
This is my first thread, so hello!
Me and my sister both have a S5839i, and my sisters just randomly bricked, and it is on a boot loop.
I have tried EVERYTHING online- recovery mode, downloading firmware with odin...you name it.
I have used the totoro_0623.pit file, and on Odin, it said it passed. But then trying with all the other firmware, it didn't work.
Yes, I am using the right version of Odin, and I don't have Kies running at the same time as Odin.
This is what happens when I put S5839IBULL1_S5839IVD2LH1_VD2.tar.md5 into the PDA section in Odin. This is the Germany Vodafone firmware, someone else posted in the forums. I have tried the UK one with the 3 network (what my region and network is) , but that doesn't work either, and comes up with the same thing in Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULL1_S5839iVD2LH1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I just stupid, and have missed something, or is there another way? Please note : The phone is not modded in anyway, not even rooted, but the warranty has run out.
Thankyou
KizzleKat said:
This is my first thread, so hello!
Me and my sister both have a S5839i, and my sisters just randomly bricked, and it is on a boot loop.
I have tried EVERYTHING online- recovery mode, downloading firmware with odin...you name it.
I have used the totoro_0623.pit file, and on Odin, it said it passed. But then trying with all the other firmware, it didn't work.
Yes, I am using the right version of Odin, and I don't have Kies running at the same time as Odin.
This is what happens when I put S5839IBULL1_S5839IVD2LH1_VD2.tar.md5 into the PDA section in Odin. This is the Germany Vodafone firmware, someone else posted in the forums. I have tried the UK one with the 3 network (what my region and network is) , but that doesn't work either, and comes up with the same thing in Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULL1_S5839iVD2LH1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I just stupid, and have missed something, or is there another way? Please note : The phone is not modded in anyway, not even rooted, but the warranty has run out.
Thankyou
Click to expand...
Click to collapse
Get the official firmware needed on Sammobile.com, you need an account on there. Don't worry it's free. Flash it as PDA on Odin. Make sure your phone is in download mode (volume up+volume down+power). If it boots, the boot animation might start looping. From theres you can access recovery (volume up+power+home). In recovery you wipe data and wipe cache and select reboot. It should work.
Sent from my GT-I8190N using Tapatalk
Hi
Don't panic !
Is not a brick, but Odin doesn't support one file (PDA) package.
You need to use Odinatrix to create a 3 files firmware or download a 3 files firmwares
Galaxy_Ace_Love said:
Hi
Don't panic !
Is not a brick, but Odin doesn't support one file (PDA) package.
You need to use Odinatrix to create a 3 files firmware or download a 3 files firmwares
Click to expand...
Click to collapse
Odin 3.07 supports one file package
Humm...
iamareebjamal said:
Odin 3.07 supports one file package
Click to expand...
Click to collapse
I used Odin 3.07, and that worked... but when the phone loaded and installed - it said "Failed to mount /data (invalid argument)" and continued to boot loop. I thought by installing the firmware and re-partitioning it would fix that :/
KizzleKat said:
I used Odin 3.07, and that worked... but when the phone loaded and installed - it said "Failed to mount /data (invalid argument)" and continued to boot loop. I thought by installing the firmware and re-partitioning it would fix that :/
Click to expand...
Click to collapse
Format the data
Put the pit file and tick Repartition. And then flash with Odin.
And you have to use Cooperve pit, not Totoro, it's for SGY
Yeah, I have ticked the re-partion and stuff. Apparently totoro works with Ace as well? All the tutorials say that...
I will still try though
Edit: Tried and still no luck....
Sent from my GT-S5839i using xda app-developers app
KizzleKat said:
Yeah, I have ticked the re-partion and stuff. Apparently totoro works with Ace as well? All the tutorials say that...
I will still try though
Edit: Tried and still no luck....
Sent from my GT-S5839i using xda app-developers app
Click to expand...
Click to collapse
Follow these Guidehttp://forum.xda-developers.com/showthread.php?t=1840645
Sent from my GT-S5830i using Tapatalk 2
Hi, currently having problems with S3 GT-I9300. I am stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' Cannot do anything with phone atm. I have tried kies to carry it emergency recovery but that fails everytime it gets to 4%. I have also tried to flash a stock rom using Odin but that again says FAIL in red. Any help would be great! thanks
ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
John90uk said:
Hi, currently having problems with S3 GT-I9300. I am stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' Cannot do anything with phone atm. I have tried kies to carry it emergency recovery but that fails everytime it gets to 4%. I have also tried to flash a stock rom using Odin but that again says FAIL in red. Any help would be great! thanks
ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try to enter download mode and again flash the rom. You said "I also tried flashing STOCK rom", what were you flashing before? I just encountered this error today and flashed again after entering download mode and the error went away.
haiderijaz said:
Try to enter download mode and again flash the rom. You said "I also tried flashing STOCK rom", what were you flashing before? I just encountered this error today and flashed again after entering download mode and the error went away.
Click to expand...
Click to collapse
i have tried this on many occasions but i still receive the same errors in odin and kies. have also tried different ports ad pc's. how do i find the correct firmware for my phone?
You do not say what you where doing/ flashing in the first instance .
Kies must be off if using Odin .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
JJEgan said:
You do not say what you where doing/ flashing in the first instance .
Kies must be off if using Odin .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
Click to expand...
Click to collapse
The problem started when i plugged my phone on charge, when i unplugged it the phone turned off and continued to restart after samsung logo screen. I then tried kies to upgrade and initiliase but when that reached 4% it would say an error occured. This happens constantly. I then closed kies and tried flashing a Stock rom with ODIN but it keeps saying FAIL in red.
Also afrer kies recovery it now says firmware upgrade encountered an error.
John90uk said:
i have tried this on many occasions but i still receive the same errors in odin and kies. have also tried different ports ad pc's. how do i find the correct firmware for my phone?
Click to expand...
Click to collapse
I am unable to understand how you are using Kies and Odin at the same time. You need to go to sammobile.com and find your country there.
haiderijaz said:
I am unable to understand how you are using Kies and Odin at the same time. You need to go to sammobile.com and find your country there.
Click to expand...
Click to collapse
I am not using both softwares at the same time. Its a GT-I9300.
John90uk said:
I am not using both softwares at the same time. Its a GT-I9300.
Click to expand...
Click to collapse
First of all, Please try and make sure you can enter recovery mode. From what I understand, your phone is soft bricked. Also you mentioned the model. To download the appropriate firmware you need the country.
IF you can enter recovery mode, things are okay. We can then try rooting your phone with and flashing a custom rom. If that works, stock rom can be flashed back later. But first of all please try entering recovering mode by pressing Volume Up, Home and Power Button. When you see the samsung boot logo, let go and if you get some options that means you are in recovery.
haiderijaz said:
First of all, Please try and make sure you can enter recovery mode. From what I understand, your phone is soft bricked. Also you mentioned the model. To download the appropriate firmware you need the country.
IF you can enter recovery mode, things are okay. We can then try rooting your phone with and flashing a custom rom. If that works, stock rom can be flashed back later. But first of all please try entering recovering mode by pressing Volume Up, Home and Power Button. When you see the samsung boot logo, let go and if you get some options that means you are in recovery.
Click to expand...
Click to collapse
I can only get into download mode. When i try entering recovery mode i get a screen which says firmware upgrade encountered an error an issue. Where do i go from here?
Product code in download mode if blank its SDS .
JJEgan said:
Product code in download mode if blank its SDS .
Click to expand...
Click to collapse
Odin mode
product name: GT-I9300
Custom Binary download: No
current binary: samsung official
System status: custom
John90uk said:
Odin mode
product name: GT-I9300
Custom Binary download: No
current binary: samsung official
System status: custom
Click to expand...
Click to collapse
First of all pls find out which country your samsung is bought from. Europe? usa? Which firmware did you flash with ODIN? Where did you get it from?
May be we can try and root your phone.
haiderijaz said:
First of all pls find out which country your samsung is bought from. Europe? usa? Which firmware did you flash with ODIN? Where did you get it from?
May be we can try and root your phone.
Click to expand...
Click to collapse
It was from the UK. And i have tried to flash a T-mobile Uk firmware as it was on t-mobile. Thanks guys
Recovery mode and rooting are irrelevant to your issue. Try flashing the rescue firmware from the general forum, if that fails then you'll probably need a new motherboard.
Sent from my GT-I9300 using Tapatalk
Yo Guys! I think my bootloader was already updated, and I tried to flash back to original 4.3 or 4.1.2, but nothing of it worked.
When I try to flash f.e. the
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMR2_I9300VFREMA3_I9300BUEMA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me I was on CM 10.2/CM11 and wanted to restore factory images, because my Audio Plug-In didnt work properly anymore and my screen had some pixel errors.
I tried to flash a CWM touch recovery, but that did work only once - then flashed the bootloader downgrade Restore_Bootloader_XXBLFB.zip, but
I still couldnt flash any factory firmware
I also tried this here:
http://forum.xda-developers.com/showthread.php?t=2083860
Tried method 2 of that one, didnt get me in position to install the stock firmware.
Does anyone have any advice?
I still can enter CWM (or install it) and can enter Download Mode
I tried 4.3, 4.1.2 and 4.0.4 , nothing worked
Update #1 I could reflash cyangenmod over cwm again and my cell works too. *phew*
How do I get back to stock rom? Meanwhile I'll try mobile odin
update #2
mobile odin worked, got back to stock. just letting u know.
Have you tried another version of ODIN? I used to have some issue with version 3.0 and above. So it seems that version 1.8.5 is more stable that the new ones... try redownload your ROM, maybe it has some issues too.
Finally, use SAMSUNG SG3 TOOLKIT, I have used that too and without any issue.
Good Luck
:cyclops:
froycard said:
Have you tried another version of ODIN? I used to have some issue with version 3.0 and above. So it seems that version 1.8.5 is more stable that the new ones... try redownload your ROM, maybe it has some issues too.
Finally, use SAMSUNG SG3 TOOLKIT, I have used that too and without any issue.
Good Luck
:cyclops:
Click to expand...
Click to collapse
Read post above you
I tried Version 1.85 and 3.09, both didn't work. But thanks to Chainfire for developing this awesome tool :laugh::good:
mobile odin got my phone finally flashed