Hi, currently having problems with S3 GT-I9300. I am stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' Cannot do anything with phone atm. I have tried kies to carry it emergency recovery but that fails everytime it gets to 4%. I have also tried to flash a stock rom using Odin but that again says FAIL in red. Any help would be great! thanks
ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
John90uk said:
Hi, currently having problems with S3 GT-I9300. I am stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' Cannot do anything with phone atm. I have tried kies to carry it emergency recovery but that fails everytime it gets to 4%. I have also tried to flash a stock rom using Odin but that again says FAIL in red. Any help would be great! thanks
ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try to enter download mode and again flash the rom. You said "I also tried flashing STOCK rom", what were you flashing before? I just encountered this error today and flashed again after entering download mode and the error went away.
haiderijaz said:
Try to enter download mode and again flash the rom. You said "I also tried flashing STOCK rom", what were you flashing before? I just encountered this error today and flashed again after entering download mode and the error went away.
Click to expand...
Click to collapse
i have tried this on many occasions but i still receive the same errors in odin and kies. have also tried different ports ad pc's. how do i find the correct firmware for my phone?
You do not say what you where doing/ flashing in the first instance .
Kies must be off if using Odin .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
JJEgan said:
You do not say what you where doing/ flashing in the first instance .
Kies must be off if using Odin .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
Click to expand...
Click to collapse
The problem started when i plugged my phone on charge, when i unplugged it the phone turned off and continued to restart after samsung logo screen. I then tried kies to upgrade and initiliase but when that reached 4% it would say an error occured. This happens constantly. I then closed kies and tried flashing a Stock rom with ODIN but it keeps saying FAIL in red.
Also afrer kies recovery it now says firmware upgrade encountered an error.
John90uk said:
i have tried this on many occasions but i still receive the same errors in odin and kies. have also tried different ports ad pc's. how do i find the correct firmware for my phone?
Click to expand...
Click to collapse
I am unable to understand how you are using Kies and Odin at the same time. You need to go to sammobile.com and find your country there.
haiderijaz said:
I am unable to understand how you are using Kies and Odin at the same time. You need to go to sammobile.com and find your country there.
Click to expand...
Click to collapse
I am not using both softwares at the same time. Its a GT-I9300.
John90uk said:
I am not using both softwares at the same time. Its a GT-I9300.
Click to expand...
Click to collapse
First of all, Please try and make sure you can enter recovery mode. From what I understand, your phone is soft bricked. Also you mentioned the model. To download the appropriate firmware you need the country.
IF you can enter recovery mode, things are okay. We can then try rooting your phone with and flashing a custom rom. If that works, stock rom can be flashed back later. But first of all please try entering recovering mode by pressing Volume Up, Home and Power Button. When you see the samsung boot logo, let go and if you get some options that means you are in recovery.
haiderijaz said:
First of all, Please try and make sure you can enter recovery mode. From what I understand, your phone is soft bricked. Also you mentioned the model. To download the appropriate firmware you need the country.
IF you can enter recovery mode, things are okay. We can then try rooting your phone with and flashing a custom rom. If that works, stock rom can be flashed back later. But first of all please try entering recovering mode by pressing Volume Up, Home and Power Button. When you see the samsung boot logo, let go and if you get some options that means you are in recovery.
Click to expand...
Click to collapse
I can only get into download mode. When i try entering recovery mode i get a screen which says firmware upgrade encountered an error an issue. Where do i go from here?
Product code in download mode if blank its SDS .
JJEgan said:
Product code in download mode if blank its SDS .
Click to expand...
Click to collapse
Odin mode
product name: GT-I9300
Custom Binary download: No
current binary: samsung official
System status: custom
John90uk said:
Odin mode
product name: GT-I9300
Custom Binary download: No
current binary: samsung official
System status: custom
Click to expand...
Click to collapse
First of all pls find out which country your samsung is bought from. Europe? usa? Which firmware did you flash with ODIN? Where did you get it from?
May be we can try and root your phone.
haiderijaz said:
First of all pls find out which country your samsung is bought from. Europe? usa? Which firmware did you flash with ODIN? Where did you get it from?
May be we can try and root your phone.
Click to expand...
Click to collapse
It was from the UK. And i have tried to flash a T-mobile Uk firmware as it was on t-mobile. Thanks guys
Recovery mode and rooting are irrelevant to your issue. Try flashing the rescue firmware from the general forum, if that fails then you'll probably need a new motherboard.
Sent from my GT-I9300 using Tapatalk
Related
hey guys, had the gs2 a few months now and decided to root it tonight.
plan back fired. stuck with the samsung logo and the ! symbol.
original info:
GT-I9100
2.3.3
I9100NEKF2
2.6.35.7-I9100XWKF4-CL280512
[email protected]#2
Gingerbread.XWKF4
Click to expand...
Click to collapse
CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4
is what i tried to flash this with (odin).
Went through all the steps. flashed, blue bar came across. said success in ODIN. Phone rebooted but wont get past the ! screen.
have tried flashing with I9100XWKF4_Kernel and tried reflashing with CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4, Both result in same issue (phone stuck on boot screen with ! symbol).
Any ideas on where ive gone wrong? or possibly a way to resolve this?
Thanks again
rossonza
can you enter download or recovery mode? (volume up + home + power // volume down + home + power)
If you can go in recovery, wipe data/cache factory reset + wipe cache + advanced and wipe dalvik cache.
Mount usb storage and put in your internal memory a rom (like batista or villain rom or checkrom your choice, i use batista) flash that one and reboot.
If you can only go in download mode, try to flash the lite'ning 6.1 (KH3) rom, be sure to DONT check repartition (that will brick your phone).
The lite'ning already contains root (no need to use cf-root before) so if you can enter download mode, it's a good choice to "unlock" (hopefully it works) your phone.
i can get into download mode still but cant get into recovery (never could?)
downloading that rom now. big download :S
Well, the rooting process didnt worked well if you cant even enter recovery (that comes with the rooted kernel).
Keep me informed if you can fix the problem.
I forgot to tell you, you can also flash from download (maybe you prefer) a stock original rom (from this forum, S2 Android Original Development) so you get back to the stock rom (without root).
im downloading both the custom liteneing rom and the stock firmware. Ill let you know how it goes.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Litening_Rom_v6-1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Litening wont flash.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
GT-I9100_H3G_I9100XWKF4_I9100NEKF2_I9100H3GKF1
That's not looking bright.
Im sure it can be fixed since you can enter dw mode and Odin finds / connect at the phone.
Try with the stock one, if also that one isnt working, you need a more experienced advice from a "veteran" of the forum
Stock not flashing either, both failed :S
really hope i havnt destroyed this phone. nexus one was a breeze to root.
phone gets into download mode no issues and ODIN picks it up.
rossonza said:
i can get into download mode still but cant get into recovery (never could?)
downloading that rom now. big download :S
Click to expand...
Click to collapse
If (never could?) means also on stock firmware then this was the first mistake.You need to try and flash your original FW (or another from XDA if your phone is unlocked) to get recovery.Without it you wont root or install ROMs.
http://www.multiupload.com/N5RWCXT1LJ
i imagine youve already got it but stick it in pda and try it.It might take a few trys but give it few goes.I had an i9000 jtaged that came back without recovery mode and it took me a few failed attempts before it finally passed and rebooted with recovery and then your away laughing.
and if it continues to fail? jig and return to samsung? or will this be covered under my 3 contract..
If your download count (download mode) is set to 0, it is covered by your warranty.. if it's more than 0, you need a jig to set it to 0.
Kinda strange problem you got here, phone is not bricked (since odin find it and you can access dw mode) but looks like it refuse any kind of firmware.
Anyone else a suggestion? im sure big names of the forum can help out a bit here...
rossonza said:
and if it continues to fail? jig and return to samsung? or will this be covered under my 3 contract..
Click to expand...
Click to collapse
Heres the problem with the return idea.If the symbol on the screen is the classic "PHONE...!...PC" icon then its a semi-bricked icon and if your bin counter is at 0 then samsung are your better choice but 3 might not be abligated to take it back as this sign clearly means a PC-Phone connection problem and not a software problem alone.If the icon on your screen is a big yellow triangle with the ! inside then samsung can refuse to take the phone back even if your bin counter is at 0 cos this is a special warning sign put but samsung to see if you have been screwing with your phone outside of your warranty.If its the big yellow one then keep trying to flash and if nothing works then pay 30 or 40 bucks to get a jtag done.Because you can get into download mode I see no reason at the moment why it wont flash Use the firmware from XDA dont forget.IT worked for me with their PDA flashes and not the samfirmware files with pit files.Dont use pit files and try a more reciente FW if your phone is unlocked as i said ealier.If you want try the samfirmware file that gives you the 3 files instead of one(without pit but use odin 1.85 from here http://forum.xda-developers.com/showthread.php?t=1075278
PDA/PHONE/CSC and see what happens.give everything a try.
try this if you want.Its XWKE1 multi CSC H3GKD4 from May.Thought it might help cos its an H3G brand firmware like on your phone.If it works then yourll get back recovery and then can flash what ever you want again.Worth a try.BUT use Odin from XDA (1.85) and no pit file and dont tick re-partition.PDA/PHONE/CSC
password is samfirmware.com
http://hotfile.com/dl/119477273/436e381/I9100XWKE1_H3GKD4_NEKD5.rar.html
rossonza said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Litening_Rom_v6-1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Litening wont flash.
Click to expand...
Click to collapse
You can't flash a custom rom with odin.
You need CMW.
That's why failed.
Red_Vex said:
You can't flash a custom rom with odin.
You need CMW.
That's why failed.
Click to expand...
Click to collapse
Wrong, Lite'ning package is a ODIN package, not a clockworkmod package, i did flash the rom 3-4 times in the last 2 months with odin.
keep trying to flash, but its failing. may be a gonner :S i always read that its not bricked if you can get to download mode. guess this is wrong?
im getting no phone to PC error. so is all ok?
Download mode shows current binary as custom
6 counts of flashing the device.
rossonza said:
keep trying to flash, but its failing. may be a gonner :S i always read that its not bricked if you can get to download mode. guess this is wrong?
im getting no phone to PC error. so is all ok?
Download mode shows current binary as custom
6 counts of flashing the device.
Click to expand...
Click to collapse
Download mode does not mean its bricked or not bricked it just means on a bricked phone you stand a chance of recovery but that depends upon a number of factors the principle one in all this flashing is the user .
It may that multiple flashings have messed up or that the wrong firmware has been flashed .
My steps would be .
One reset rom counter with USB jig to clear for warranty.
Two Recovery mode Mounts and storage Format data cache system dalvik and sd card .
Power off boot to download mode and flash a full stock rom via Odin .
Do not use any firmware you have already used .
jje
recovery mode isnt available so cant mount.
anyone else care to input?
cooza said:
Heres the problem with the return idea.If the symbol on the screen is the classic "PHONE...!...PC" icon then its a semi-bricked icon and if your bin counter is at 0 then samsung are your better choice but 3 might not be abligated to take it back as this sign clearly means a PC-Phone connection problem and not a software problem alone.If the icon on your screen is a big yellow triangle with the ! inside then samsung can refuse to take the phone back even if your bin counter is at 0 cos this is a special warning sign put but samsung to see if you have been screwing with your phone outside of your warranty.If its the big yellow one then keep trying to flash and if nothing works then pay 30 or 40 bucks to get a jtag done.Because you can get into download mode I see no reason at the moment why it wont flash Use the firmware from XDA dont forget.IT worked for me with their PDA flashes and not the samfirmware files with pit files.Dont use pit files and try a more reciente FW if your phone is unlocked as i said ealier.If you want try the samfirmware file that gives you the 3 files instead of one(without pit but use odin 1.85 from here http://forum.xda-developers.com/showthread.php?t=1075278
PDA/PHONE/CSC and see what happens.give everything a try.
try this if you want.Its XWKE1 multi CSC H3GKD4 from May.Thought it might help cos its an H3G brand firmware like on your phone.If it works then yourll get back recovery and then can flash what ever you want again.Worth a try.BUT use Odin from XDA (1.85) and no pit file and dont tick re-partition.PDA/PHONE/CSC
password is samfirmware.com
http://hotfile.com/dl/119477273/436e381/I9100XWKE1_H3GKD4_NEKD5.rar.html
Click to expand...
Click to collapse
Thanks that firmware fails, Whats a JTAG?
i dont mind paying to get this fixed if thats what it comes to.
cheers
Why not try to re-install the drivers?
I got problem flashing the rom, but rectified it after re-installing the drivers.
May help u.
I have a bricked i9300 galaxy s3 16gb,i have it bricked 3 months or more...i want to resurrect it, but i dont know how... Please, help, I had flashed every kind of roms but it doesn´t starts,it continuously reboot in the samsung screen,i delete ALL in the odin but without any success... Please help me, i am not a developer,I am a spanish 18 years old and I am very lost...please help...
I tryed to flash the stock rom of samsung
I9300XXELLC
I tryed to flash the "unbrick" method of the 2nac program but it fails when it starts to flash (it fails when he beggins to flash "boot.img")
http://www.2nas.com/index.php/site/page?view=howto#unbrick
I tryed to flash the resurrect rom to unbrick it
http://checkrom.com/threads/resurrection-odin-checkrom-evohd™-v4.896/
And all this methods of unbrick failed. Now, I am trying to flash this
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
This is the message of odin when I flash the files
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don´t know why it fails, because when i flash only a PDA file,the stock rom for example,it flash perfectly, but when I flash other files it fails.
Somebody can help me??? PLEASE...
you should flash a stock FW via odin.
just make sure before starting odin you need to close all kies processes via task manager, this could lead to the failed operation.
GL
i tried it but it fails... :S
eytan123 said:
you should flash a stock FW via odin.
just make sure before starting odin you need to close all kies processes via task manager, this could lead to the failed operation.
GL
Click to expand...
Click to collapse
when i flash it,the process is success but after the flash,when I try to turn the device on just restarts over and over again when it reaches the samsung screen, the animated image, not the "samsung galaxy s3" beggining image
Go into recovery and do a reset after the flash
1) Flash a stock ROM via ODIN
2) If it keeps restarting at the Samsung logo, go into recovery (turn the phone off and then hold volume up + home button + power button until the Android appears) and factory reset/wipe data.
3) Restart
DeadSOL said:
1) Flash a stock ROM via ODIN
2) If it keeps restarting at the Samsung logo, go into recovery (turn the phone off and then hold volume up + home button + power button until the Android appears) and factory reset/wipe data.
3) Restart
Click to expand...
Click to collapse
after the flash i cant enter to recovery mode...
davidmartins said:
after the flash i cant enter to recovery mode...
Click to expand...
Click to collapse
You will need to flash 3 things
1. Stock firmware
2. Cf auto root
3. CWM recovery touch
And then enter into recovery and make a reser
Sent from my GT-I9300
Recovering a bricked Galaxy S3
davidmartins said:
I have a bricked i9300 galaxy s3 16gb,i have it bricked 3 months or more...i want to resurrect it, but i dont know how... Please, help, I had flashed every kind of roms but it doesn´t starts,it continuously reboot in the samsung screen,i delete ALL in the odin but without any success... Please help me, i am not a developer,I am a spanish 18 years old and I am very lost...please help...
I tryed to flash the stock rom of samsung
I9300XXELLC
I tryed to flash the "unbrick" method of the 2nac program but it fails when it starts to flash (it fails when he beggins to flash "boot.img")
http://www.2nas.com/index.php/site/page?view=howto#unbrick
I tryed to flash the resurrect rom to unbrick it
http://checkrom.com/threads/resurrection-odin-checkrom-evohd™-v4.896/
And all this methods of unbrick failed. Now, I am trying to flash this
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
This is the message of odin when I flash the files
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don´t know why it fails, because when i flash only a PDA file,the stock rom for example,it flash perfectly, but when I flash other files it fails.
Somebody can help me??? PLEASE...
Click to expand...
Click to collapse
I've got a Galaxy S3 which goes into a reboot loop from time to time and I found this which should help you:
http://reviews.cnet.co.uk/mobile-phones/how-to-recover-a-bricked-samsung-galaxy-s3-50009490/
I'd be interested to know if it solves your problem.
JohnOfStony said:
I've got a Galaxy S3 which goes into a reboot loop from time to time and I found this which should help you:
http://reviews.cnet.co.uk/mobile-phones/how-to-recover-a-bricked-samsung-galaxy-s3-50009490/
I'd be interested to know if it solves your problem.
Click to expand...
Click to collapse
Sorry but...I´ve done it and it reboots like before... Really thank you even so...
Problem...
I think i fried the EMMC... because when i try to flash the pit it doesn´t works...
But when I try to flash a PDA file, the stock rom, it flash succesly, but after the flash, it reboots continuously... i think the partition of bootloader is the bad flashed here...
If you´ve got other pit files can you post here the url? Thanks!
davidmartins said:
I think i fried the EMMC... because when i try to flash the pit it doesn´t works...
But when I try to flash a PDA file, the stock rom, it flash succesly, but after the flash, it reboots continuously... i think the partition of bootloader is the bad flashed here...
If you´ve got other pit files can you post here the url? Thanks!
Click to expand...
Click to collapse
When stock rom has flashed by odin each write is verified and if any error is found will be logged in odin textarea.
So, probably problem is not emmc.
The common cause to boot loop is data partition has been corrupted.
To solve is necessary format data partition.
To boot direct in recovery mode, use the combination volume_up+home+power.
Use recovery menu to issue the factory reset.
davidmartins said:
I have a bricked i9300 galaxy s3 16gb,i have it bricked 3 months or more...i want to resurrect it, but i dont know how... Please, help, I had flashed every kind of roms but it doesn´t starts,it continuously reboot in the samsung screen,i delete ALL in the odin but without any success... Please help me, i am not a developer,I am a spanish 18 years old and I am very lost...please help...
I tryed to flash the stock rom of samsung
I9300XXELLC
I tryed to flash the "unbrick" method of the 2nac program but it fails when it starts to flash (it fails when he beggins to flash "boot.img")
http://www.2nas.com/index.php/site/page?view=howto#unbrick
I tryed to flash the resurrect rom to unbrick it
http://checkrom.com/threads/resurrection-odin-checkrom-evohd™-v4.896/
And all this methods of unbrick failed. Now, I am trying to flash this
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
This is the message of odin when I flash the files
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don´t know why it fails, because when i flash only a PDA file,the stock rom for example,it flash perfectly, but when I flash other files it fails.
Somebody can help me??? PLEASE...
Click to expand...
Click to collapse
Dear Brother I think u flash stock recovery 1st and then try to flash new rom.then f-reset and restart,mey bit solve.sorry 4 my bad English.find zip 4 sotck recovery
sam77744 said:
Dear Brother I think u flash stock recovery 1st and then try to flash new rom.then f-reset and restart,mey bit solve.sorry 4 my bad English.find zip 4 sotck recovery
Click to expand...
Click to collapse
flash via odin
I've tried same as davidmartins but all failed w/ the same Odin log.
Initial rom on my S3 was I9300XXLEF (Hong Kong) and I flashed Samsung Galaxy S III GT-I9300 Stock Firmware Collection I9300XXEMA2 after that it didn’t re-boot because of wrong ROM, if I try to get into recovery it shows the “Firmware upgrade encountered issue. Please select recovery mode in Kies & try again” screen.
I tried also to re-flash the Stock FW but failed too.
Any further advise to bring my S III back to life would be highly appreciated.
Cheers.....LinChina
your motherboard are dead .. I had the same problem with an HTC HD2. motherboard has failed without doing something wrong.
andreivibefm said:
your motherboard are dead .. I had the same problem with an HTC HD2. motherboard has failed without doing something wrong.
Click to expand...
Click to collapse
i will do a JTAG in a week.If it doesn´t works, I will buy another galaxy s3 T.T
davidmartins said:
i will do a JTAG in a week.If it doesn´t works, I will buy another galaxy s3 T.T
Click to expand...
Click to collapse
y havet same isuse bat y resolvet . try to flash diferent cw recovery and then the room
sory for bad eng.
Yesterday phone stuck on samsung logo.. Try go into recovery and wipe data, reset but still the same. Now i can go only into download mode.
Try uisng KIES stuck on 0%. Now trying to flash using ODIN to original f/w but get this error or it stuck <ID:0/004> SetupConnection..
Running on SuperNexus custom rom
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ1_I9300OLBDLJ1_I9300DXDLI5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do i have to flash the PIT file?
It does not mention PIT in the Odin log .
Either firmware file is faulty .
READ the SDS sudden death syndrome post .
jje
JJEgan said:
It does not mention PIT in the Odin log .
Either firmware file is faulty .
READ the SDS sudden death syndrome post .
jje
Click to expand...
Click to collapse
I havent choose the PIT option yet coz i saw someone mention its like last resort.
I try few firmwares still the same. Anything else i can do?
keptz said:
I havent choose the PIT option yet coz i saw someone mention its like last resort.
I try few firmwares still the same. Anything else i can do?
Click to expand...
Click to collapse
You're phone was hit by sds ... there no can do from that
Sent from my GT-I9300 using xda premium
keptz said:
Running on SuperNexus custom rom
Click to expand...
Click to collapse
Had you updated to Official 4.1.2 before flashing SuperNexus??
What kernel and recovery were you using. Please mention the version number too.
I have the same issue. It happened the other day... can't flash anything with odin. I have the i9300, was rooted, CWM recovery, and had an Omega rom 6-7 months old.
So anything that can be done? I can only get to download mode.
dhirend_6d said:
Had you updated to Official 4.1.2 before flashing SuperNexus??
What kernel and recovery were you using. Please mention the version number too.
Click to expand...
Click to collapse
that doesn't matter since the fix is in the kernel.
Glebun said:
that doesn't matter since the fix is in the kernel.
Click to expand...
Click to collapse
Yes, that is why I asked which kernel and recovery he was running. Along with the version number.
I was talking about the first sentence
dhirend_6d said:
Had you updated to Official 4.1.2 before flashing SuperNexus??
What kernel and recovery were you using. Please mention the version number too.
Click to expand...
Click to collapse
Im using Siyah kernel and recovery i think 6. something..cant remember as i cant go into recovery mode
I try to root using CF-Root from a rooradio blog i cant post link ere
still fail
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> recovery.img
<ID:0/014> NAND Write Start!!
<ID:0/014> Complete(Write) operation failed.
<ID:0/014> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Anything else i can try?
maybe try kies, oops I see that you already tried that.sorry
Suden Death Sindrome
Sent from my GT-I9300 using xda premium
Hey everyone,
I tried updating my Verizon Galaxy S4 to Lollipop via Samsung Kies. The update process produced an error message (at app. 10%) and offered me to start the recovery process, which failed subsequently. Needless to say, Android OS does not work, however I can still boot into download/recovery mode.
I've been trying to flash various stock ROMs via Odin 3.10 with no success. The build numbers of the ROMs I've been trying to flash contained the I545VRUFNC5 number, since I tried preserving compatibility with the previous (Stock) ROM that had the same build number. Prior to flashing Lollipop via Kies, I made the made a screenshot (attached below) in case I ran into some kind of trouble. It contains the Model/Build of my S4.
I've also tried using a PIT file during the flashing process with no success.
The error message Odin gives me always reads:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUFNC5_I545VZWFNC5_I545VRUFNC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
The main question is whether I need to stick to build I545VRUFNC5 to reflash. If not, which Stock ROM am I able to Install via Odin without bricking the phone further
For exact phone model/specs pls open the screenshot below. I would also be very grateful if someone could provide me a stock ROM (name/link/version) that I could flash via Odin to resolve the mess Kies and I created.
Any help is much appreciated.
Thanks in advance.
Make sure to get FULL WIPE AND REPARTITION. All data will be lost..
XxD34THxX said:
Make sure to get FULL WIPE AND REPARTITION. All data will be lost..
Click to expand...
Click to collapse
Thanks for the reply. Sadly, I don't have a custom recovery flashed on my phone. I already tried flashing TWRP and the process resulted in a similar error message as described above (auth fail/error). I've already performed a factory reset via the stock recovery, so the data is already gone
intel.fan said:
Thanks for the reply. Sadly, I don't have a custom recovery flashed on my phone. I already tried flashing TWRP and the process resulted in a similar error message as described above (auth fail/error). I've already performed a factory reset via the stock recovery, so the data is already gone
Click to expand...
Click to collapse
Bad mistake to do TWRP. With reading, you would have known that TWRP is restricted to MDK... Safestrap(@hashcode) is what you have to use. Or Flashfire(@chainfire) or the New Multisystem tool by @hsbadr... Use Odin, get the zip, and flash it in the PDA( or AP) slot. I fixed my friend's when he did that, but he got lucky...
XxD34THxX said:
Bad mistake to do TWRP. With reading, you would have known that TWRP is restricted to MDK... Safestrap(@hashcode) is what you have to use. Or Flashfire(@chainfire) or the New Multisystem tool by @hsbadr... Use Odin, get the zip, and flash it in the PDA( or AP) slot. I fixed my friend's when he did that, but he got lucky...
Click to expand...
Click to collapse
No mate, since the bootloader seems to be locked. It simply didn't flash TWRP - the stock bootloader is still present and running. Trying to flash TWRP was kind of a desparate measure, since I don't have OS access to flash/install any of the above. Also, my phone was 100% stock Kitkat 4.4.2 with no root access
Resolved the issue! =)
The problem was in that the Lollipop update process had already been started (unsuccessfully), Odin was "seeing" the flash process as a downgrade - so it wouldn't allow it.
I tried flashing a stock Lollipop ROM via Odin and it worked like a charm
Thanks for your support.
@mods: Please close/archive this thread.
First of all sorry for bad english
I cannot flash anything because of this error and also when i press the power button it says: ''Firmware upgrade encountered an issue.Please select recovery mode in kies and try again'' i think pit partition is also problem. I was using custom ROM and i cannot open recovery mode neither help me guys it is the error log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
SOLUTION:
I solve the problem i just simply renew the phone's root and then flashed a firmware now there is no problem and thanks for the reply
If you have "re-partition" ticked in odin, untick it.
Are you absolutely sure that the firmware you're flashing is correct for that variant?. Have you tried recovery via kies?.
If yes to all then you might have to find a pit file and flash it because it is trying to re-partition the nand, could be corrupt.
shivadow said:
If you have "re-partition" ticked in odin, untick it.
Are you absolutely sure that the firmware you're flashing is correct for that variant?. Have you tried recovery via kies?.
If yes to all then you might have to find a pit file and flash it because it is trying to re-partition the nand, could be corrupt.
Click to expand...
Click to collapse
Yes i tried to untick it but then it couldnt find pit file.
I'm certain that i downloaded the right firmware. And i tried with 3 other firmware as well.
I tried kies but i couldnt do it because it couldnt connect the phone.
And lastly i tried 4 other pit files but result is same where can i find the right pit file i think it is the problem. By the way last night i could flashed twrp recovery but i couldnt open it. When i tried to it open twrp it opened download mode. And it is the important part: i could not FLASHED AGAIN just happened once odin always keep stuck at "set partition" with "GET MAPPING FOR PIT..." step.
Try a pit file WITH the firmware in odin and see how far that gets..
Read post #1 here: https://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
shivadow said:
Try a pit file WITH the firmware in odin and see how far that gets..
Read post #1 here: https://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
Click to expand...
Click to collapse
Thank you but i solved it.
Guillotine35 said:
SOLUTION:
I solve the problem i just simply renew the phone's root and then flashed a firmware now there is no problem and thanks for the reply
Click to expand...
Click to collapse
Hai, can you tell me how to renew phone root?
iki_sure said:
Hai, can you tell me how to renew phone root?
Click to expand...
Click to collapse
You just have to root phone here it's explanation:
https://forum.xda-developers.com/showthread.php?t=2499904
Guillotine35 said:
Thank you but i solved it.
Click to expand...
Click to collapse
How did you solve it?
aki001 said:
How did you solve it?
Click to expand...
Click to collapse
hi Brother i am getting same issue can you tell me how you fix this issue partitino error
masu222 said:
hi Brother i am getting same issue can you tell me how you fix this issue partitino error
Click to expand...
Click to collapse
same error - Tab A 2016 - SM-T580.
I would be grateful for any help here .. i unticked & ticked the re-partition but same result
samsung sm-T580 pit partition error in odin
I try to update my sm-t580 to android 9.0 by using firmwere . I was did with odin flash. After that my tab is not start normaly. I plug my charger and my tab show boot screen and say invailed kernel length. There is no recovery mode only download mode is ok. But when i try to flash any firm were like 6.0 ,7.0 or 8.0 odin failed with massage there is no pit partition.:crying: Help me out plz .
bornoamit said:
I try to update my sm-t580 to android 9.0 by using firmwere . I was did with odin flash. After that my tab is not start normaly. I plug my charger and my tab show boot screen and say invailed kernel length. There is no recovery mode only download mode is ok. But when i try to flash any firm were like 6.0 ,7.0 or 8.0 odin failed with massage there is no pit partition.:crying: Help me out plz .
Click to expand...
Click to collapse
wrong thread, search in the section for your device
I have this problem too!
guillotine35 said:
first of all sorry for bad english
i cannot flash anything because of this error and also when i press the power button it says: ''firmware upgrade encountered an issue.please select recovery mode in kies and try again'' i think pit partition is also problem. I was using custom rom and i cannot open recovery mode neither help me guys it is the error log:
<id:0/004> added!!
<osm> enter cs for md5..
<osm> check md5.. Do not unplug the cable..
<osm> please wait..
<osm> i9300xxellb_i9300ojvell3_i9300xxella_home.tar.md5 is valid.
<osm> checking md5 finished sucessfully..
<osm> leave cs..
<id:0/004> odin v.3 engine (id:4)..
<id:0/004> file analysis..
<id:0/004> setupconnection..
<id:0/004> initialzation..
<id:0/004> set pit file..
<id:0/004> do not turn off target!!
<id:0/004>
<id:0/004> re-partition operation failed.
<id:0/004> added!!
<osm> all threads completed. (succeed 0 / failed 1)
<id:0/004> removed!!
<id:0/004> added!!
solution:
i solve the problem i just simply renew the phone's root and then flashed a firmware now there is no problem and thanks for the reply
Click to expand...
Click to collapse
hey i have this problem i used so many firmwares but its says every time re-partition faild!
And sometimes says pit faild! There is no pit partition... I want to know how did u do renew root?
My phone just stucked in downloading do not turn off target!
I just had that ODIN Re-Partition Error, when this happens you are flashing with the wrong country file for your device. You need to reboot into your recovery mode & check those 13 Letter & Numbers above in Recovery Mode eg:
1: The Model Of The Device = Samsung SM-A217M
2: A217MUBU5BUA3 is the Baseband Version number & letters found above in
Recovery mode or in Settings = About = BaseBand Version.
3: Type that same number A217MUBU5BUA3 in Google Search & you will get
the correct country from the result to go to either links to download the
correct country firmware, the one with samfw is the better link to use.
4: Download & apply each file as usual & START. You will see it applying the
firmware with no Re-Partition Errors. It reboots & all is good now. Let me
know if it worked for you, it did for me.
http://www.sammobile.com or http://samfw.com
Nakaiman said:
I just had that ODIN Re-Partition Error, when this happens you are flashing with the wrong country file for your device. You need to reboot into your recovery mode & check those 13 Letter & Numbers above in Recovery Mode eg:
1: The Model Of The Device = Samsung SM-A217M
2: A217MUBU5BUA3 is the Baseband Version number & letters found above in
Recovery mode or in Settings = About = BaseBand Version.
3: Type that same number A217MUBU5BUA3 in Google Search & you will get
the correct country from the result to go to either links to download the
correct country firmware, the one with samfw is the better link to use.
4: Download & apply each file as usual & START. You will see it applying the
firmware with no Re-Partition Errors. It reboots & all is good now. Let me
know if it worked for you, it did for me.
http://www.sammobile.com or http://samfw.com
Click to expand...
Click to collapse
This solution worked for me. I had the re-partition error with four different stock firmwares. Finally I used device info app to check my baseband and bootloader number. I then used those numbers to search for my exact firmware. Flashing this new firmware worked for the very first attempt. A big thanks.
Guillotine35 said:
Thank you but i solved it.
Click to expand...
Click to collapse
how did you solved can you write solution here please it would help others
awais786327 said:
how did you solved can you write solution here please it would help others
Click to expand...
Click to collapse
I updated the thread long time ago man , you can read my solution under this topic's first message.