Yesterday phone stuck on samsung logo.. Try go into recovery and wipe data, reset but still the same. Now i can go only into download mode.
Try uisng KIES stuck on 0%. Now trying to flash using ODIN to original f/w but get this error or it stuck <ID:0/004> SetupConnection..
Running on SuperNexus custom rom
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ1_I9300OLBDLJ1_I9300DXDLI5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do i have to flash the PIT file?
It does not mention PIT in the Odin log .
Either firmware file is faulty .
READ the SDS sudden death syndrome post .
jje
JJEgan said:
It does not mention PIT in the Odin log .
Either firmware file is faulty .
READ the SDS sudden death syndrome post .
jje
Click to expand...
Click to collapse
I havent choose the PIT option yet coz i saw someone mention its like last resort.
I try few firmwares still the same. Anything else i can do?
keptz said:
I havent choose the PIT option yet coz i saw someone mention its like last resort.
I try few firmwares still the same. Anything else i can do?
Click to expand...
Click to collapse
You're phone was hit by sds ... there no can do from that
Sent from my GT-I9300 using xda premium
keptz said:
Running on SuperNexus custom rom
Click to expand...
Click to collapse
Had you updated to Official 4.1.2 before flashing SuperNexus??
What kernel and recovery were you using. Please mention the version number too.
I have the same issue. It happened the other day... can't flash anything with odin. I have the i9300, was rooted, CWM recovery, and had an Omega rom 6-7 months old.
So anything that can be done? I can only get to download mode.
dhirend_6d said:
Had you updated to Official 4.1.2 before flashing SuperNexus??
What kernel and recovery were you using. Please mention the version number too.
Click to expand...
Click to collapse
that doesn't matter since the fix is in the kernel.
Glebun said:
that doesn't matter since the fix is in the kernel.
Click to expand...
Click to collapse
Yes, that is why I asked which kernel and recovery he was running. Along with the version number.
I was talking about the first sentence
dhirend_6d said:
Had you updated to Official 4.1.2 before flashing SuperNexus??
What kernel and recovery were you using. Please mention the version number too.
Click to expand...
Click to collapse
Im using Siyah kernel and recovery i think 6. something..cant remember as i cant go into recovery mode
I try to root using CF-Root from a rooradio blog i cant post link ere
still fail
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> recovery.img
<ID:0/014> NAND Write Start!!
<ID:0/014> Complete(Write) operation failed.
<ID:0/014> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Anything else i can try?
maybe try kies, oops I see that you already tried that.sorry
Suden Death Sindrome
Sent from my GT-I9300 using xda premium
Related
<ID:0/040> Removed!!
<ID:0/040> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100GZCKH4_CL484595_REVr07_user_low_ship.t ar.md5 is valid.
<OSM> CODE_I9100GZCKH4_CL484595_REVr07_user_low_ship.tar .md5 is valid.
<OSM> MODEM_I9100GZCKH4_REV_00_CL1050825.tar.md5 is valid.
<OSM> GT-I9100G-CSC-MULTI-OZHKH4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/040> Odin v.3 engine (ID:40)..
<ID:0/040> File analysis..
<ID:0/040> SetupConnection..
<ID:0/040> Initialzation..
<ID:0/040> Set PIT file..
<ID:0/040> DO NOT TURN OFF TARGET!!
<ID:0/040> Get PIT for mapping..
<ID:0/040> Firmware update start..
<ID:0/040> MLO
<ID:0/040> NAND Write Start!!
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any solution ?
hey quickgsm
are you using a Chinese version of i9100g.because flashing chinese firmware with odin will only work for chinese i9100g not i9100g of any other country.post details about your i9100g.
darkshadow1997 said:
hey quickgsm
are you using a Chinese version of i9100g.because flashing chinese firmware with odin will only work for chinese i9100g not i9100g of any other country.post details about your i9100g.
Click to expand...
Click to collapse
i try to flash by many firmware if i use I9100GXXLPN_I9100GXEFLPN_XEF_2 or I9100GXXLPN_XEFLPN_France_Android_4.0.3 flash working 100% but phone stuck on samsung logo and if i use this firmware I9100GZCKH4 i jet error :
<ID:0/040> Firmware update start..
<ID:0/040> MLO
<ID:0/040> NAND Write Start!!
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PS : my I9100G from france
why did you tick repartition for? un-tick taht option
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
omg why did you tick all????
only tick PDA file and put in the firmware
ad_ek said:
why did you tick repartition for? un-tick taht option
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
omg why did you tick all????
only tick PDA file and put in the firmware
Click to expand...
Click to collapse
same issue if i don't tick repartition
quickgsm said:
same issue if i don't tick repartition
Click to expand...
Click to collapse
only tick the pda
nothing else
n try to flash a gb firmware firstly and thn try to flash ics
Devices-
Samsung galaxy s2 i9100g (Cm9-Nightly build)
sony walkman 8 ( Cm9 Stable )
Blackberry 9300 cracked for bbm
Press thnks if i tried to help
im not sure which guide you are following. but the normal procedure to flash firmware with odin is only using ODIN is to only tick the PDA option. and insert the firmware file which you have downloaded.. im trying to
help you ...but if you are getting mad...its ok. you can find your way.
ad_ek said:
im not sure which guide you are following. but the normal procedure to flash firmware with odin is only using ODIN is to only tick the PDA option. and insert the firmware file which you have downloaded.. im trying to
help you ...but if you are getting mad...its ok. you can find your way.
Click to expand...
Click to collapse
yup your right ad_ek ..just use the pda option and dont touch other thing...can your phone boot to eg: recovery or download mode?use pit only when your phone is in soft brick state..if fail again try reboot your pc/change usb port and try again
Wonder why OP tick so many for what. Just tick PDA.. that it. Don't touch other things.
PIT only required if your phone is softbrick.
Chinese ROM
Looks like you have a Chinese phone with the locked bootloader, go back to stock for now.
-delete-
In my case it is only one file .tar.md5 can fix soft brick ?!!
i think it's better to flash a 3 part, since sometimes in a soft brick, a single files doesn't work , but a 3 file can fix soft brick
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
quickgsm said:
In my case it is only one file .tar.md5 can fix soft brick ?!!
i think it's better to flash a 3 part, since sometimes in a soft brick, a single files doesn't work , but a 3 file can fix soft brick
Click to expand...
Click to collapse
Sorry, but just flash the tar.md5 file as pda in odin. I really suggest not to think but to follow the instructions given.
quickgsm said:
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
Click to expand...
Click to collapse
Try to find the stock kernel for the chinese ICS...last time i had this situation i was able to flash the kernel even i could not get in download mode.
Don't panic. I am sure that the ppl around will help you so that you don't come out with an expensive paperweight
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPN_I9100GXXLPN_I9100GXEFLPN_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> MLO
<ID:0/010> NAND Write Start!!
<ID:0/010> Sbl.bin
<ID:0/010> param.lfs
<ID:0/010> factoryfs.img
<ID:0/010> zImage
<ID:0/010> modem.bin
<ID:0/010> cache.img
<ID:0/010> hidden.img
<ID:0/010> RQT_CLOSE !!
<ID:0/010> RES OK !!
<ID:0/010> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/010> Removed!!
phone still show Samsung galaxy S2 GT-I9100G can help me to fix it ?
Which is your problem right now?
Yesterday I was flashing with Odin v1.85 and it was a total mess. I had NAND Write error like you had. I downloaded Odin v1.7 and I got my S2 back alive.
But with your last log, it flashed, so I don't understand what's your problem. Doesn't boot?
antonio1475 said:
Which is your problem right now?
Yesterday I was flashing with Odin v1.85 and it was a total mess. I had NAND Write error like you had. I downloaded Odin v1.7 and I got my S2 back alive.
But with your last log, it flashed, so I don't understand what's your problem. Doesn't boot?
Click to expand...
Click to collapse
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
quickgsm said:
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
Click to expand...
Click to collapse
It just keeps in the first boot screen with/without a yellow triangle and the name Samsung and the model in white letters?
Please be a little more clear and descriptive so we can be sure what you are talking about
my problem :
the phone got stuck at boot up screen after the update showing the message Samsung Galaxy S2 GT-I9100G. Please provide the solution for this.
quickgsm said:
my problem :
the phone got stuck at boot up screen after the update showing the message Samsung Galaxy S2 GT-I9100G. Please provide the solution for this.
Click to expand...
Click to collapse
OK. So download a stock firmware for your model, which I guess you already have by the first post, and download Odin v1.7 (http://www.mediafire.com/?jyyux6yxem8uojn).
Use Odin v1.7 to flash just PDA (the CODE file). If doesn't boot (if it says error flashing let me know), try changing USB port (remember to reboot the device in download mode each time you want to flash with Odin).
If not, add the other files but without PIT. Finally if it doesn't boot, try with PIT too.
Let me know your progress. Best luck
This is my first thread, so hello!
Me and my sister both have a S5839i, and my sisters just randomly bricked, and it is on a boot loop.
I have tried EVERYTHING online- recovery mode, downloading firmware with odin...you name it.
I have used the totoro_0623.pit file, and on Odin, it said it passed. But then trying with all the other firmware, it didn't work.
Yes, I am using the right version of Odin, and I don't have Kies running at the same time as Odin.
This is what happens when I put S5839IBULL1_S5839IVD2LH1_VD2.tar.md5 into the PDA section in Odin. This is the Germany Vodafone firmware, someone else posted in the forums. I have tried the UK one with the 3 network (what my region and network is) , but that doesn't work either, and comes up with the same thing in Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULL1_S5839iVD2LH1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I just stupid, and have missed something, or is there another way? Please note : The phone is not modded in anyway, not even rooted, but the warranty has run out.
Thankyou
KizzleKat said:
This is my first thread, so hello!
Me and my sister both have a S5839i, and my sisters just randomly bricked, and it is on a boot loop.
I have tried EVERYTHING online- recovery mode, downloading firmware with odin...you name it.
I have used the totoro_0623.pit file, and on Odin, it said it passed. But then trying with all the other firmware, it didn't work.
Yes, I am using the right version of Odin, and I don't have Kies running at the same time as Odin.
This is what happens when I put S5839IBULL1_S5839IVD2LH1_VD2.tar.md5 into the PDA section in Odin. This is the Germany Vodafone firmware, someone else posted in the forums. I have tried the UK one with the 3 network (what my region and network is) , but that doesn't work either, and comes up with the same thing in Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULL1_S5839iVD2LH1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I just stupid, and have missed something, or is there another way? Please note : The phone is not modded in anyway, not even rooted, but the warranty has run out.
Thankyou
Click to expand...
Click to collapse
Get the official firmware needed on Sammobile.com, you need an account on there. Don't worry it's free. Flash it as PDA on Odin. Make sure your phone is in download mode (volume up+volume down+power). If it boots, the boot animation might start looping. From theres you can access recovery (volume up+power+home). In recovery you wipe data and wipe cache and select reboot. It should work.
Sent from my GT-I8190N using Tapatalk
Hi
Don't panic !
Is not a brick, but Odin doesn't support one file (PDA) package.
You need to use Odinatrix to create a 3 files firmware or download a 3 files firmwares
Galaxy_Ace_Love said:
Hi
Don't panic !
Is not a brick, but Odin doesn't support one file (PDA) package.
You need to use Odinatrix to create a 3 files firmware or download a 3 files firmwares
Click to expand...
Click to collapse
Odin 3.07 supports one file package
Humm...
iamareebjamal said:
Odin 3.07 supports one file package
Click to expand...
Click to collapse
I used Odin 3.07, and that worked... but when the phone loaded and installed - it said "Failed to mount /data (invalid argument)" and continued to boot loop. I thought by installing the firmware and re-partitioning it would fix that :/
KizzleKat said:
I used Odin 3.07, and that worked... but when the phone loaded and installed - it said "Failed to mount /data (invalid argument)" and continued to boot loop. I thought by installing the firmware and re-partitioning it would fix that :/
Click to expand...
Click to collapse
Format the data
Put the pit file and tick Repartition. And then flash with Odin.
And you have to use Cooperve pit, not Totoro, it's for SGY
Yeah, I have ticked the re-partion and stuff. Apparently totoro works with Ace as well? All the tutorials say that...
I will still try though
Edit: Tried and still no luck....
Sent from my GT-S5839i using xda app-developers app
KizzleKat said:
Yeah, I have ticked the re-partion and stuff. Apparently totoro works with Ace as well? All the tutorials say that...
I will still try though
Edit: Tried and still no luck....
Sent from my GT-S5839i using xda app-developers app
Click to expand...
Click to collapse
Follow these Guidehttp://forum.xda-developers.com/showthread.php?t=1840645
Sent from my GT-S5830i using Tapatalk 2
Hi, currently having problems with S3 GT-I9300. I am stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' Cannot do anything with phone atm. I have tried kies to carry it emergency recovery but that fails everytime it gets to 4%. I have also tried to flash a stock rom using Odin but that again says FAIL in red. Any help would be great! thanks
ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
John90uk said:
Hi, currently having problems with S3 GT-I9300. I am stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' Cannot do anything with phone atm. I have tried kies to carry it emergency recovery but that fails everytime it gets to 4%. I have also tried to flash a stock rom using Odin but that again says FAIL in red. Any help would be great! thanks
ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMF1_I9300TMUEMF1_I9300BVEMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try to enter download mode and again flash the rom. You said "I also tried flashing STOCK rom", what were you flashing before? I just encountered this error today and flashed again after entering download mode and the error went away.
haiderijaz said:
Try to enter download mode and again flash the rom. You said "I also tried flashing STOCK rom", what were you flashing before? I just encountered this error today and flashed again after entering download mode and the error went away.
Click to expand...
Click to collapse
i have tried this on many occasions but i still receive the same errors in odin and kies. have also tried different ports ad pc's. how do i find the correct firmware for my phone?
You do not say what you where doing/ flashing in the first instance .
Kies must be off if using Odin .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
JJEgan said:
You do not say what you where doing/ flashing in the first instance .
Kies must be off if using Odin .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
Click to expand...
Click to collapse
The problem started when i plugged my phone on charge, when i unplugged it the phone turned off and continued to restart after samsung logo screen. I then tried kies to upgrade and initiliase but when that reached 4% it would say an error occured. This happens constantly. I then closed kies and tried flashing a Stock rom with ODIN but it keeps saying FAIL in red.
Also afrer kies recovery it now says firmware upgrade encountered an error.
John90uk said:
i have tried this on many occasions but i still receive the same errors in odin and kies. have also tried different ports ad pc's. how do i find the correct firmware for my phone?
Click to expand...
Click to collapse
I am unable to understand how you are using Kies and Odin at the same time. You need to go to sammobile.com and find your country there.
haiderijaz said:
I am unable to understand how you are using Kies and Odin at the same time. You need to go to sammobile.com and find your country there.
Click to expand...
Click to collapse
I am not using both softwares at the same time. Its a GT-I9300.
John90uk said:
I am not using both softwares at the same time. Its a GT-I9300.
Click to expand...
Click to collapse
First of all, Please try and make sure you can enter recovery mode. From what I understand, your phone is soft bricked. Also you mentioned the model. To download the appropriate firmware you need the country.
IF you can enter recovery mode, things are okay. We can then try rooting your phone with and flashing a custom rom. If that works, stock rom can be flashed back later. But first of all please try entering recovering mode by pressing Volume Up, Home and Power Button. When you see the samsung boot logo, let go and if you get some options that means you are in recovery.
haiderijaz said:
First of all, Please try and make sure you can enter recovery mode. From what I understand, your phone is soft bricked. Also you mentioned the model. To download the appropriate firmware you need the country.
IF you can enter recovery mode, things are okay. We can then try rooting your phone with and flashing a custom rom. If that works, stock rom can be flashed back later. But first of all please try entering recovering mode by pressing Volume Up, Home and Power Button. When you see the samsung boot logo, let go and if you get some options that means you are in recovery.
Click to expand...
Click to collapse
I can only get into download mode. When i try entering recovery mode i get a screen which says firmware upgrade encountered an error an issue. Where do i go from here?
Product code in download mode if blank its SDS .
JJEgan said:
Product code in download mode if blank its SDS .
Click to expand...
Click to collapse
Odin mode
product name: GT-I9300
Custom Binary download: No
current binary: samsung official
System status: custom
John90uk said:
Odin mode
product name: GT-I9300
Custom Binary download: No
current binary: samsung official
System status: custom
Click to expand...
Click to collapse
First of all pls find out which country your samsung is bought from. Europe? usa? Which firmware did you flash with ODIN? Where did you get it from?
May be we can try and root your phone.
haiderijaz said:
First of all pls find out which country your samsung is bought from. Europe? usa? Which firmware did you flash with ODIN? Where did you get it from?
May be we can try and root your phone.
Click to expand...
Click to collapse
It was from the UK. And i have tried to flash a T-mobile Uk firmware as it was on t-mobile. Thanks guys
Recovery mode and rooting are irrelevant to your issue. Try flashing the rescue firmware from the general forum, if that fails then you'll probably need a new motherboard.
Sent from my GT-I9300 using Tapatalk
I am trying to flash phone back to stock ROM due to my phone only booting in Odin mode, but I keep getting FAIL! flash attempts in Odin. The failure occurs at the message line FAIL! (Auth). I have tried flashing VRUAMDK_NoWipe.tar and CF-Auto-Root-jflte-jfltexx-gti9505.
Portisface said:
I am trying to flash phone back to stock ROM due to my phone only booting in Odin mode, but I keep getting FAIL! flash attempts in Odin. The failure occurs at the message line FAIL! (Auth). I have tried flashing VRUAMDK_NoWipe.tar and CF-Auto-Root-jflte-jfltexx-gti9505.
Click to expand...
Click to collapse
Were you originally on MDK? If so, have you checked MD5?
riker147 said:
Were you originally on MDK? If so, have you checked MD5?
Click to expand...
Click to collapse
Sorry the full filename is VRUAMDK_NoWipe.tar.md5. Is that what you're talking about?
Portisface said:
Sorry the full filename is VRUAMDK_NoWipe.tar.md5. Is that what you're talking about?
Click to expand...
Click to collapse
No. What build were you on before your problems?
riker147 said:
No. What build were you on before your problems?
Click to expand...
Click to collapse
I don't remember other than I was at 4.3. I had my phone rooted using SuperSU and I tried unrooting so I could download the latest OTA. I was still getting errors to install updates after disabling SuperSU and was getting sick of my phone constantly trying to update so I decided to try to revert back to stock. I downloaded Odin and the TAR file I mentioned and followed the instructions to restore back to stock ROM. I received that error and found in another forum that someone got it to work using CF-Auto-Root-jflte-jfltexx-gti9505. I tried that to and same issue. I can't find any other solutions.
Portisface said:
I don't remember other than I was at 4.3. I had my phone rooted using SuperSU and I tried unrooting so I could download the latest OTA. I was still getting errors to install updates after disabling SuperSU and was getting sick of my phone constantly trying to update so I decided to try to revert back to stock. I downloaded Odin and the TAR file I mentioned and followed the instructions to restore back to stock ROM. I received that error and found in another forum that someone got it to work using CF-Auto-Root-jflte-jfltexx-gti9505. I tried that to and same issue. I can't find any other solutions.
Click to expand...
Click to collapse
You need to find what build you were on because you can't flash an older build. You can only flash your original build or newer. If you want the latest OTA, (Kit Kat), you need to download the .tar file for that.
riker147 said:
You need to find what build you were on because you can't flash an older build. You can only flash your original build or newer. If you want the latest OTA, (Kit Kat), you need to download the .tar file for that.
Click to expand...
Click to collapse
I am currently downloading Kit Kat. However, I was trying to flash it one more time to copy and paste the message lines here and now the error is "There is no PIT partition." I have already downloaded the PIT for my phone. I am I gonna have to use that now?
Portisface said:
I am currently downloading Kit Kat. However, I was trying to flash it one more time to copy and paste the message lines here and now the error is "There is no PIT partition." I have already downloaded the PIT for my phone. I am I gonna have to use that now?
Click to expand...
Click to collapse
I think you might me be over complicating things. If you're going with NC5 (Kit Kat) and you can use Odin, I think all you're going to need is the .tar file.
riker147 said:
I think you might me be over complicating things. If you're going with NC5 (Kit Kat) and you can use Odin, I think all you're going to need is the .tar file.
Click to expand...
Click to collapse
So the "no PIT partition" message isn't a problem?
Hi,
I've been trying to revert to stock rom just like the OP. As you'll see my adventure ends at aboot.mbn. I downloaded the latest build (SCH-I545_MDK_562219_Stock_Restore.tar.md5) according the tutorial I'm using. I'm using the latest version of Odin3 1.85 (also according to the tutorial. Also, I'm using the Samsung Galaxy S4 VZW (SCH-1545) phone. Any and all help will be appreciated!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
gotshot87 said:
Hi,
I've been trying to revert to stock rom just like the OP. As you'll see my adventure ends at aboot.mbn. I downloaded the latest build (SCH-I545_MDK_562219_Stock_Restore.tar.md5) according the tutorial I'm using. I'm using the latest version of Odin3 1.85 (also according to the tutorial. Also, I'm using the Samsung Galaxy S4 VZW (SCH-1545) phone. Any and all help will be appreciated!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi guys,
1st thing thank you for the informations and knowledge i have learned here at XDA.
I have the same problem . I have done all i believe i can from all the research i have done and come acrossed. Hands up in the air and i surrender.
Need some help
If anybody could please fhank you so much...
It looks like you are trying to unlock the wrong baseband version.
The only Verizon Samsung Galaxy S4 (SCH-I545), aka jfltevzw, that has an unlockable bootloader is the one that has the baseband version "I545VRUAMDK".
And once the baseband is updated to a newer one, it cannot be downgraded.
Sent from my SCH-I535 using XDA Free mobile app
Hello, today my friend gave me his S3 I9300. Don't know what he did with device but it can't start.
- Recovery mode doesn't work (see a lot of errors)
- Download mode works but I can't flash firmware via Odin 3.07, 3.09
Can anybody helps me please? S3 has official ROM and I flash official ROM of course.
I downloaded ROM for my country of course.
Don't have Kies, tried reinstall Samsung USB drivers, tried replace USB port.
Will be very thankful for all your ideas how to fix that.
Video of S3:
https://www.youtube.com/watch?v=YDDtiqhmTBg
Log from ODIN:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OXXGNB2_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Are u using a PIT file in Odin? Is re-partition checked? Also ask ur friend if he has repartitioned the device before
GT-I9300
OmniROM 4.4.4
Boeffla Kernel 2.4NG Beta4
GravityBox + XGELS
XDA Free App
Renecek said:
Hello, today my friend gave me his S3 I9300. Don't know what he did with device but it can't start.
- Recovery mode doesn't work (see a lot of errors)
- Download mode works but I can't flash firmware via Odin 3.07, 3.09
Can anybody helps me please? S3 has official ROM and I flash official ROM of course.
I downloaded ROM for my country of course.
Don't have Kies, tried reinstall Samsung USB drivers, tried replace USB port.
Will be very thankful for all your ideas how to fix that.
Video of S3:
https://www.youtube.com/watch?v=YDDtiqhmTBg
Log from ODIN:
Click to expand...
Click to collapse
1. Flash a new recovery and than make a factory reset
2. Install the latest samsung fimrware.
3. Maybe try it with odin1.85
Tkkg1994 said:
1. Flash a new recovery and than make a factory reset
2. Install the latest samsung fimrware.
3. Maybe try it with odin1.85
Click to expand...
Click to collapse
Tried install the stock recovery with bad result..
jinayhvora: he doesn't know what he did, he tried all
Renecek said:
Tried install the stock recovery with bad result..
jinayhvora: he doesn't know what he did, he tried all
Click to expand...
Click to collapse
Nand write fail usually means your Nand is corrupt and you need service repair.You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but i doubt it will work.
tallman43 said:
Nand write fail usually means your Nand is corrupt and you need service repair.You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but i doubt it will work.
Click to expand...
Click to collapse
Thanks but it didn't help me.. Same error.
Renecek said:
Thanks but it didn't help me.. Same error.
Click to expand...
Click to collapse
I thought not I think you need service repair new motherboard i'm afraid.:crying:
tallman43 said:
I thought not I think you need service repair new motherboard i'm afraid.:crying:
Click to expand...
Click to collapse
I ment a custom recovery not the stock oneeeee